Welcome to Friendica.Eskimo.Com

Home of Censorship Free Hosting

 Eskimo North Linux Shells, E-mail, Virtual Machines, Web Hosting.

E-mail, Web Hosting, Linux Shell Accounts terminal or full remote desktops.

Sign Up For A Free Trial Here

Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!

lemmy - Link to source

Linux has over 6% of the desktop market? Yes, you read that right - here's how

Clickbaity title on the original article, but I think this is the most important point to consider from it:

After getting to 1% in approximately 2011, it took about a decade to double that to 2%. The jump from 2% to 3% took just over two years, and 3% to 4% took less than a year.

Get the picture? The Linux desktop is growing, and it's growing fast.


Linux has over 6% of the desktop market? Yes, you read that right - here's how

It's not a typo. Linux's desktop share is growing, according to the US government's records.
Steven Vaughan-Nichols (ZDNET)
This entry was edited (8 hours ago)

lemmy - Link to source

Volume control not working on USB audio device
The device in question is the USB dongle for my 2.4 GHz wireless headset. Everything works fine except for volume control, so it is stuck at max volume, regardless of where the volume slider in pavucontrol is. Volume controls within individual websites and programs work, but it seems that the system volume control is delegated to the USB device, which itself has no concept of volume control. This is the case with both pulseaudio and pipewire. Is there a way to limit the system-wide volume before it reaches the dongle?

lemmy - Link to source

Keep display output when monitor "Disconnected"

I am using a laptop, with a cheaper monitor that only has one hdmi input. I have two devices that I want to use on this monitor, My laptop and my xbox series, so I got an hdmi switcher.

The xbox handles switching to and from it's input without a hitch, but my laptop can takes up to a minute to recognize the switch and display to the monitor, sometimes not recognizing it at all.

I was thinking that having the laptop continue to output the display whether or not it recognizes the monitor as disconnected would help make switching between them more seamless. Is there a way to achieve this?

I am using KDE and I have the "Do Nothing" option selected under close lid in power options.

in reply to TheMonkeyLord

lemmy - Link to source

BakedCatboy

I think what you want is an EDID emulator with passthrough or whatever it's called. EDID is how a monitor tells a device what resolution to send and other info. Some cheap HDMI splitters, adapters, audio extractors, etc will let you emulate a specific EDID. One of my audio extractors lets you fake stereo vs surround support to trick the source into sending surround - I think that's also through EDID - since if you're trying to extract surround, it might be because your real TVs EDID is for stereo I assume. So you probably want something like that in before the switch so that the laptop always thinks something is plugged in. Your switch seems to be too smart in actually passing through the real monitor's EDID so the laptop is able to see when it switches.
This entry was edited (10 hours ago)
in reply to TheMonkeyLord

lemmy - Link to source

interdimensionalmeme

Just use the linux equivalent of github.com/VirtualDrivers/Virt…
When the wayland people stop pretending you don't need it
in 3 to 5 years, sometime around when they realize that network transparency is really important actually

GitHub - VirtualDrivers/Virtual-Display-Driver: Add virtual monitors to your windows 10/11 device! Works with VR, OBS, Sunshine, and/or any desktop sharing software.

Add virtual monitors to your windows 10/11 device! Works with VR, OBS, Sunshine, and/or any desktop sharing software. - VirtualDrivers/Virtual-Display-Driver
GitHub
This entry was edited (9 hours ago)

lemmy - Link to source

what's the deal with flatpak's organic maps downloading the whole world all at once, not even offering the user an option to cancel it or to choose what maps to download? (debian 12.11)

debian 12.11, organic maps from flatpak.

My local organic maps started to download the whole world. Every single map it could find. I tried stopping it but the only way to achieve that is to turn the application off. On starting it again, it resumes downloading.

Why?

The android based version found on f-droid is easier to use. I wanted to use the desktop based one because I work from home more often than elsewhere.

lemmy - Link to source

[Combat] Operators of the USF's 413th “Raid” Battalion struck a Russian Strela-10 SAM system in Donetsk Oblast. The reconnaissance UAV evaded a missile before an FPV drone struck the target.

Sensitive content

lemmy - Link to source

Linux Breaks 5% Desktop Share in U.S., Signaling Open-Source Surge Against Windows and macOS

Linux Breaks 5% Desktop Share in U.S., Signaling Open-Source Surge Against Windows and macOS

Linux has surpassed 5% desktop market share in the US (5.03% in June 2025), per StatCounter, driven by privacy concerns, rising costs of Windows/macOS, and user-friendly distros like Ubuntu.
Ryan Gibson (WebProNews)

lemmy - Link to source

US gov't is very afraid of BRICS and dedollarization, Trump insiders reveal. That's why he's attacking Brazil

US gov't is very afraid of BRICS and dedollarization, Trump insiders reveal. That's why he's attacking Brazil

Close Trump allies like Steve Bannon say "the president is pissed every time he looks at the BRICS dedollarization effort". The US fears the Global South challenge to the dollar's exorbitant privilege
Ben Norton (Geopolitical Economy Report)

lemmy - Link to source

are qr codes and pkpass files the same? what other formats do transportation authorities use?

qr code is the squares code that, if used with a qr code scanner redirects me automatically to a website or to download a pkpass file, right?

after downloading said pkpass file to my android, any wallet application like fosswallet should recognize it and add it to the local library (on my android device), right?

what other formats do transportation authorities use?

To those residing in Germany, is pkpass use widespread there? What are common formats used there?

lemmy - Link to source

are qr codes and pkpass files the same? what other formats do transportation authorities use?

cross-posted from: lemmy.ml/post/33289366

obligatory I know this is not a linux question, but you provide good information and alternatives

qr code is the squares code that, if used with a qr code scanner redirects me automatically to a website or to download a pkpass file, right?

after downloading said pkpass file to my android, any wallet application like fosswallet should recognize it and add it to the local library (on my android device), right?

what other formats do transportation authorities use?

To those residing in Germany, is pkpass use widespread there? What are common formats used there?


springs283

2025-07-17 14:50:18

lemmy - Link to source

are qr codes and pkpass files the same? what other formats do transportation authorities use?


qr code is the squares code that, if used with a qr code scanner redirects me automatically to a website or to download a pkpass file, right?

after downloading said pkpass file to my android, any wallet application like fosswallet should recognize it and add it to the local library (on my android device), right?

what other formats do transportation authorities use?

To those residing in Germany, is pkpass use widespread there? What are common formats used there?


This entry was edited (17 hours ago)
in reply to queermunist she/her

lemmy - Link to source

HumanPenguin

Exactly. No matter the y dimension. Barcode data is only stored in x. Whereas QR uses x and y for data.

They also use the corner squares and a few specific dots to allow scanning from greater angles. Basically allowing the data to be read in 3d space. Even though only 2d is used to store that data.

This is why QR can work well with cameras. Whereas bar codes are designed for very short range laser reflection.

PS lots of info on QR online including open source programs to make your own.

The same goes for bar codes. But readers involve some very simple maker skills. Making simple barcode readers was a common school science project in the early 90s.

This entry was edited (16 hours ago)
in reply to queermunist she/her

lemmy - Link to source

TimLovesTech (AuDHD)(he/him)

Your generic "barcode" for something like a UPC is considered a 1D barcode and uses things like the spacing of the lines and thickness to encode data. Although some 1D barcodes can detect the barcode is damaged they cannot do error recovery.

Your 2D barcodes, like QR or Data Matrix, store data in both directions and depending on format can have varying levels of error correction (duplicate data) built into the barcode. They also obviously can take up less room and hold the same or more data as well. You do need a scanner that can do 2D barcodes though, as not all scanners will read them.

lemmy - Link to source

ESWIN and Canonical team up to port Ubuntu to EBC77 RISC-V SBC
ESWIN Computing is launching a new SBC running RISC-V. In a joint statement with Canonical, they have announced first-party support for Ubuntu 24.04 LTS on the new device. Good news for anyone wanting to diversify away from ARM SBC's.

ESWIN Computing EBC77 RISC-V SBC To Support Ubuntu Linux

Canonical announced today that they teamed up with ESWIN Computing to ship Ubuntu Linux as the preferred operating system on their ESWIN Computing EBC77 Series single board computer
www.phoronix.com

lemmy - Link to source

Initramfs: What is it and how to abuse it

cross-posted from: lemmy.ml/post/33275115

According to my statistics that I look at, my second largest group are those who are on some Linux distribution (it just shows up as "Linux" there for me). Why did I write this? Because this group of people indirectly start their system through something called initramfs. Let's take a look at what it is and how to use it to our advantage.

Use the translator in the sidebar to translate the page.

Initramfs: Čo to je a ako to využiť v náš prospech

Blog o roznych veciach
typekmatus.blogspot.com

lemmy - Link to source

The Hunt For The Perfect Laptop Continues
This isn’t the first time I’ve blogged about the dearth of truly great PC laptops out there, and I suspect it won’t be the last.


Source


The hunt for a perfect laptop continues

This is a bit of a rant; feel free to skip it if you’re here for the KDE content. This isn’t the first time I’ve blogged about the dearth of truly great PC laptops out there, and …
Adventures in Linux and KDE

lemmy - Link to source

OS Backup - what should and what should not be backup'd?

Hello there! Here's the thing: I got some old HDD for my Debian home server, and now that I have plenty of disk space I want to keep a backup of the OS, so that if something accidentally breaks (either SW or HW) I can quickly fix it.

now the question is: which directory should I include and which should I exclude from the backup? I use docker a lot, is there any docker-specific directory that I should back up?

in reply to tubbadu

lemmy - Link to source

linuxPIPEpower

It is a question I've spent a lot of time trying to work out. Can't speak to docker.

Some of the specifics of Keeps and Dontkeeps depend on details of your system. You have to find out where the distro, DM and other apps keep the following:

Dontkeeps:
- trashes
- temp files
- file indexes .. IMHO these dont backup properly if you leave them in and will prevent you from completing the task
- device files

Keeps:
- list of installed packages --- explicit and deps separate if possible
- config files: /etc, ~/.config, ~/.* on a case by case basis... I say remove the obvious large temp dirs and keep the rest by default for simplicity
- for the system configs I've had a tool called etckeeper running for a while because it was highly recommended but I've never actually restored from it...
- personal documents and other files such as typically kept in the home directory
- /root occasionally has something you need

Ways to investigate:
- use a disk usage utility to find out where your storage is being used up ... It'll help you find large Dontkeeps
- watch for recently modified files
- dirs and files that are modified all the time are usually temp dirs. But sometimes they have something useful like your firefox profile.

Most backup solutions are ONE of the following:

  1. User files
  2. System files

Don't spend too much time crying about needing two solutions. Just make your backup today and reach perfection later.

Remember: sync isn't backup. Test your backup if you can (but its not as easy as it sounds). Off site your most precious files.

This entry was edited (14 hours ago)
in reply to tubbadu

lemmy - Link to source

SayCyberOnceMore

I think most options have been covered here, but I'd like to consider some other bits...

User accounts & file permissions:- if you have >1 account, note that the UserID is internally numbered (starting from 1000, so Bob=1000, Sue=1001) and your file system is probably setup using the numerical UserID... so re-creating the users in a different order would give Sue access to Bob's files and vice versa.

Similarly, backing up /etc /var etc... you should check if any applications (ie databases) need specific chmod and chown settings

Rsync, tar, etc can cover some of this, you just need to check you rebuild users in the correct order.

Maybe Ansible is another approach? So your disaster recovery would be:
1. Install plain OS on new drive
2. Get Ansible access to it (ie basic netwroking)
3. Rebuild OS and instsll applicstions automatically with Ansible
4. Restore application & home folders (again with Ansible)

When you get this working, it's amazing to watch an entire system being rebuilt

lemmy - Link to source

Looking for an alternative to google wallet, when it’s the default option to download a German travel card.

I now reside in Germany and my current employer pays 50% of this so called Deutschland-Job-Ticket. There is no physical card but travel information you download to an android wallet, but apparently google wallet is the only available option. See the picture:

Google is a company I don’t trust with my data, neither do I expect your regular public transportation authority employee to care about his privacy (he looked at me as I was asking if 2 + 2 equal 4). I am not aware of non google based wallets where I can download the travel information.

I tried some f-droid and droidify options but it turns out they’re pure crap.

The site: abo.ride-ticketing.de/app/ I log in with my username and password, get my travel information and on the bottom the picture I uploaded.

Any workarounds?

This being Germany, shouldn’t there be an alternative to those who refuse google? Don’t I have that right as a consumer?

Another question: I screenshot my logged in session on the link I provided where you see my qr code and my billing data. The public transportation employee told me that’s not allowed (wtf?). Can anyone here provide a rationale?

AboApp

abo.ride-ticketing.de

lemmy - Link to source

Looking for an alternative to google wallet, when it’s the default option to download a German travel card on my android.

cross-posted from: lemmy.ml/post/33213275

I know android is minimally related to linux and the question doesn't resemble a typical question for a linux forum but each time I've asked here you've provided valuable information:

I now reside in Germany and my current employer pays 50% of this so called Deutschland-Job-Ticket. There is no physical card but travel information you download to an android wallet, but apparently google wallet is the only available option. See the picture:

Google is a company I don’t trust with my data, neither do I expect your regular public transportation authority employee to care about his privacy (he looked at me as I was asking if 2 + 2 equal 4). I am not aware of non google based wallets where I can download the travel information.

I tried some f-droid and droidify options but it turns out they’re pure crap.

The site: abo.ride-ticketing.de/app/ I log in with my username and password, get my travel information and on the bottom the picture I uploaded.

Any workarounds?

This being Germany, shouldn’t there be an alternative to those who refuse google? Don’t I have that right as a consumer?

Another question: I screenshot my logged in session on the link I provided where you see my qr code and my billing data. The public transportation employee told me that’s not allowed (wtf?). Can anyone here provide a rationale?

AboApp

abo.ride-ticketing.de
in reply to springs283

lemmy - Link to source

balsoft

As far as I remember, things other than credit/debit cards in Google Wallet are pretty much images that you can scan like you would a paper ticket. Maybe download that ticket somehow — if some other app provides the same android "activity" as Google Wallet (so it shows up in "Open WIth" menu when you clicj that button), you can use it to avoid Google completely. If it's hardcoded to use Google Wallet, make a separate account just for this ticket. Then just open the ticket in the app, take a screenshot, and use your favorite gallery app to scan it in at ticket gates.
This entry was edited (2 days ago)
in reply to springs283

lemmy - Link to source

utopiah

I'm using fWallet for Eurostar, plane tickets, etc anything with PkPass. Very minimalist, just does the job.


fWallet | F-Droid - Free and Open Source Android App Repository

A beautiful cross-platform wallet application for your transport tickets, discou
f-droid.org
This entry was edited (2 days ago)

lemmy - Link to source

Gaza: Israel kills more than 130 Palestinians in 24 hours

By Mera Aladam
Published date: 14 July 2025 11:50 BST | Last update:~08:00 EDT

According to the UN agency for #Palestinian refugees (UNRWA), "truckloads of food and medical supplies are waiting in warehouses" outside #Gaza.

"Stop the starvation. Lift the siege. Let the #UN, including #UNRWA, do its lifesaving work," they said in a post on X.


Gaza: Israel kills more than 130 Palestinians in 24 hours

Israeli forces killed more than 130 Palestinians in Gaza in a single day, including several children who were attempting to collect water for their hungry families in the besieged enclave.
Mera Aladam (Middle East Eye)

lemmy - Link to source

Gaza: Israel kills more than 130 Palestinians in 24 hours

cross-posted from: lemmy.ml/post/33173703

By Mera Aladam
Published date: 14 July 2025 11:50 BST | Last update:~08:00 EDT
According to the UN agency for #Palestinian refugees (UNRWA), "truckloads of food and medical supplies are waiting in warehouses" outside #Gaza.

"Stop the starvation. Lift the siege. Let the #UN, including #UNRWA, do its lifesaving work," they said in a post on X.



Gaza: Israel kills more than 130 Palestinians in 24 hours

Israeli forces killed more than 130 Palestinians in Gaza in a single day, including several children who were attempting to collect water for their hungry families in the besieged enclave.
Mera Aladam (Middle East Eye)

reshared this

lemmy - Link to source

Hamas Says It Won’t Sign a “Surrender” Agreement, As War of Attrition Intensifies

Jeremy Scahill
Jul 14, 2025

Immediately after Trump announced what he called the “final proposal” for a Gaza deal, Prime Minister Benjamin Netanyahu undermined the negotiating process, repeatedly announcing—in public—his intent to continue the war after securing the release of ten living Israeli captives in a temporary 60-day truce and to forge ahead with his ethnic cleansing campaign to force the surviving Palestinians out of Gaza. “After the pause, we will transfer the population in the Strip southward and impose a siege [on the rest of Gaza],” Netanyahu told far-right cabinet minister Bezalel Smotrich recently, according to Israel’s Channel 12.


Hamas Says It Won’t Sign a “Surrender” Agreement, As War of Attrition Intensifies

Trump again claimed a Gaza deal may be imminent as Netanyahu continues his campaign of sabotage.
www.dropsitenews.com

lemmy - Link to source

Hamas Says It Won’t Sign a “Surrender” Agreement, As War of Attrition Intensifies

cross-posted from: lemmy.ml/post/33162300

Jeremy Scahill
Jul 14, 2025

Immediately after Trump announced what he called the “final proposal” for a Gaza deal, Prime Minister Benjamin Netanyahu undermined the negotiating process, repeatedly announcing—in public—his intent to continue the war after securing the release of ten living Israeli captives in a temporary 60-day truce and to forge ahead with his ethnic cleansing campaign to force the surviving Palestinians out of Gaza. “After the pause, we will transfer the population in the Strip southward and impose a siege [on the rest of Gaza],” Netanyahu told far-right cabinet minister Bezalel Smotrich recently, according to Israel’s Channel 12.


Hamas Says It Won’t Sign a “Surrender” Agreement, As War of Attrition Intensifies

Trump again claimed a Gaza deal may be imminent as Netanyahu continues his campaign of sabotage.
www.dropsitenews.com

lemmy - Link to source

Realizing Arch isn't for me after updating broke VLC

I realized my VLC was broke some point in the week after updating Arch. I spend time troubleshooting then find a forum post with replies from an Arch moderator saying they knew it would happen and it's my fault for not wanting to read through pages of changelogs. Another mod post says they won't announce that on the RSS feed either. I thought I was doing good by following the RSS but I guess that's not enough.

I've been happily using Arch for 5 years but after reading those posts I've decided to look for a different distro. Does anyone have recommendations for the closest I can get to Arch but with a different attitude around updating?

[SOLVED] vlc can't play h264 / Multimedia and Games / Arch Linux Forums

bbs.archlinux.org
in reply to makeitwonderful

lemmy - Link to source

rumba

IMHO the actual problem here is the Arch moderator being an ass.

This happens in all operating systems from time to time. An update kills an app. Usually, the app is wildly out of date and hanging on to the last vestiges of a deprecated call that finally gets removed. I recently experienced this with V4L (for OBS virtual camera) and a kernel update in NixOS. Had one hell of a time tracking it down. It was one of the twice-yearly OS upgrades. Luckily, I had only updated one of my devices, and it still worked on the old one. After tearing apart the changes, I was finally able to specify V4L and a Linux kernel version. Immediately, the problem popped right out. The new kernel now needs a specific value passed for the expected video stream, where it used to use a default if it wasn't specified.

Apple breaks apps all the time. Windows does, but less so. The difference is usually before an update happens, Windows and Apple have had TONs of people testing on their own teams and their insiders people.

In the end, I just needed to roll back the kernel one revision until the V4L guys make the change, or I needed to recompile V4L myself with the option defaulted to something useful.

I don't think you can safely get away from this kind of issue. (app incompatibility on upgrade, not mods being an ass)

Debian or Mint seem to be pretty welcoming and easy going to get rid of the asshole issues, but chances are, you're going to break something eventually, and it's going to be super hard to figure out why and how to get around it.

in reply to makeitwonderful

piefed - Link to source

pyssla

Off-topic: A meta-analysis if you will, but I'm just astonished by the engagement this post has received. I wonder what this tells us about the Linux community on Lemmy.

On-topic: OP, honestly, others have chimed in and left very good answers already. So perhaps you won't find anything within my comment that hasn't been said. But, as I'm a latecomer to this thread, I might have an advantage that some didn't (try to capitalize on). To be blunt, the original post didn't reveal much about what you liked and didn't like about Arch. As such, my initial impression would have been to suggest Gentoo. But, you've since provided the engaging community crucial insights that help us in grasping the full picture. Below you may find my own notes on your distro preferences based on what you said:
- care-free updates
- repo packages receive updates shortly after upstream
- rewards effort put into initial setup

Furthermore, I'll take the liberty to assume that (native) package availability is expected to be vast. And that you wish for the process of updating to be snappy.

Based on the above, I recommend NixOS.

If jumping ship to NixOS seems too daunting, then consider installing Nix^[To be clear, I meant the package manager. Determinate System's installer is probably your best option.] on Arch. Consider to slowly but surely expand its usage within your system. And, then, when you're comfortable, embrace NixOS as a worthy successor to your Arch installation.


Determinate Systems

Bringing Nix to the enterprise to empower fearless software delivery
determinate.systems

lemmy - Link to source

x264 AV1 file, vlc and mpv on debian 12.11, problems to play it, what to do?

the x264 av1 file plays only audio on vlc but works with flaws on mpv: on mpv I get audio and video, but every 5 to 6 seconds it's like instead of getting 24 fps I get 22, the user noticing the missing frames.

Is this a hardware issue? software?

debian 12.11, vlc 3.0.21 flatpak, mpv 0.40.0 flatpak

what do I do?

This entry was edited (3 days ago)
in reply to merompetehla

lemmy - Link to source

utopiah

Check using e.g. top for your CPU (nvidia-smi or amd-smi for your GPU) or System Monitor on KDE if any of your resource is being maxed out. If so then most likely you found the culprit.

Regarding what the actual codec is being used you can use ffprobe but anyway what matters if resource bottleneck and thus if you can have hardware acceleration for it.

It's probably worth investigating so that you don't keep on getting video files too big for your computer to handle. I imagine it's something very high resolution with very recent compression. If so, look for something less demanding, e.g. x265 720p and if that's still leading to performance hiccups the older x264 720p or even 480p.

It's rate that the media player itself, e.g. VLC or mpv, actually is the bottleneck.

This entry was edited (1 day ago)

lemmy - Link to source

How I'm sending incremental Btrfs snapshots on a Asustor NAS to a LUKS disk

Hi, I recently finished setting up my Asustor NAS, and I found the snapshotting setup in it a bit confusing, so I'm writing this as a quick reference that might be hopefully useful to others.

For context, my device is a AS1102TL, and it's running ADM 4.3.3, but I imagine it should apply to all recent Asustor devices.

First of all, the reason I picked Asustor instead of e.g. Synology... it's because it was not clear if the latter actually supported LUKS full disk encryption on an external usb hd. In Asustor you have to ssh into your NAS, but you can definitely do it.

The only gotcha: If you created the LUKS volume recently on another system, it's likely that it'll be using Argon2 for key stretching. A memory-intensive algorithm, for which the 1GB of memory provided by my AS1102TL is not enough. The solution is simply to add another key with a different algo, e.g. PBKDF2, or just create the volume on your Asustor. Either way, you're going to be able to read and write it both from the NAS and another Linux on your pc.

$ sudo $(which cryptsetup) luksOpen /dev/sdb1 encrypted # "encrypted" is just the name that I gave to the device, pick anything... remember the `-S` flag if you need to select a key in a different slot
$ sudo mount /dev/mapper/encrypted /mnt/USB1
... do what you want ...
$ sudo umount /mnt/USB1/
$ sudo $(which cryptsetup) luksClose encrypted

Unfortunately, this doesn't mean that once mounted, the disk will be integrated in the ADM ui (you're not going to be able to see it in the "External Devices" ui, nor be able to select it as a destination in the "Backup & Restore" ui).

Normally, mounted external drives are available on paths like /share/USB0, /share/USB1. Maybe it could be possible to mount (or symlink your mount point for) your disk there, to make it usable to ADM, but by default /share is an immutable loop mount of /volume0/.@system/sharebase.loop

$ lsattr -d /share/
-----i------- /share/

Trying to workaround that with chattr and maybe manually modifying sharebase.loop felt a bit more risky than needed, so I didn't attempt that (the ADM ui doesn't provide a btrfs send functionality, so it's not very interesting for our purposes anyhow).

Now, you have two different approaches to accomplish incremental backups of btrfs snapshots, one where you just create them yourself from the CLI, and one where you can try to reuse the snapshots created in ADM.

  1. Create snapshot from the cli


sudo btrfs subvolume snapshot -r /volume1 /volume1/.@snapshots/v20250710-0951

pick a parent snapshot, and send the incremental changes:
sudo btrfs send -p /volume1/.@snapshots/v20250710-0936 /volume1/.@snapshots/v20250710-0951/ | sudo btrfs receive -v /mnt/USB1/

I'm using the same naming convention, and same location that is used for snapshots created by ADM (you wouldn't get conflicts anyhow, unless you're creating another one in the exact same minute).

I recommend the -v verbose flag for btrfs receive, otherwise you're not going to see progress while the operation is ongoing.

That's it! Of course, the first send will have to happen without specifying a parent with -p, to do a full clone.

  1. Reuse snapshots created in ADM

There are two problems with this: the snapshots created by ADM are not read-only and they are mounted right under the toplevel.

To address these issues:

sudo mount /dev/md1 -o subvol=/ /mnt/rootvol
sudo btrfs property set /mnt/rootvol/v2025079-2324/ ro true

then pick a parent snapshot, and send the incremental changes:
sudo btrfs send -p /mnt/rootvol/v2025079-0824/ /mnt/rootvol/v2025079-2324 | sudo btrfs receive -v /mnt/USB1/

As above, use the -p and -v flags as needed. That's it!

If you're wondering why did we have to mount the / subvol, you can try without:

You can mount the snapshots directly in ADM's Snapshot Center, by toggling the Preview toggle for a snapshot. In that case, they are still going to be RW, though mounted as RO. You can deal with that by remounting: sudo mount -o remount,rw /volume1/.@snapshots/v2025079-2324/ && sudo btrfs property set /volume1/.@snapshots/v2025079-2324/ ro true,

You can then try to send the changes, but what you're going to get is:

$ sudo btrfs send -p /volume1/.@snapshots/v2025079-0824/ /volume1/.@snapshots/v2025079-2324
ERROR: not on mount point: /volume1/.@snapshots/v2025079-2324

The error is a bit confusing (you have mounted the volume! why is that not good enough?), but you can get a bit of clarity with btrfs subvolume list.
$ sudo btrfs subvolume list /volume1 -qua
ID 256 gen 159842 top level 5 parent_uuid -                                    uuid cbc37b20-901f-b043-8cf1-59b814814140 path <FS_TREE>/base
ID 258 gen 151914 top level 5 parent_uuid -                                    uuid 5039c206-1a89-dc45-a9fe-43f8959cb672 path <FS_TREE>/.iscsi
ID 259 gen 159840 top level 5 parent_uuid -                                    uuid 06d46207-9aa2-2944-ba38-e5736963ec12 path <FS_TREE>/.@plugins
ID 2758 gen 157876 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 256c36c5-7033-a945-a2db-b6a334a8419f path <FS_TREE>/v2025079-0824
ID 2759 gen 157859 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 88942ee6-8b52-3d4d-b972-5de2d6764728 path <FS_TREE>/v2025079-2324
ID 2762 gen 159833 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 6d636914-35a0-3f42-9486-bf5d673b94c5 path base/.@snapshots/v20250710-0936
ID 2763 gen 159836 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid e99df217-4946-a740-bba9-99f64f1a0d69 path base/.@snapshots/v20250710-0951

Now, compare with the output when listing /mnt/rootvol:
$ sudo btrfs subvolume list /mnt/rootvol/ -qua
ID 256 gen 159867 top level 5 parent_uuid -                                    uuid cbc37b20-901f-b043-8cf1-59b814814140 path base
ID 258 gen 151914 top level 5 parent_uuid -                                    uuid 5039c206-1a89-dc45-a9fe-43f8959cb672 path .iscsi
ID 259 gen 159840 top level 5 parent_uuid -                                    uuid 06d46207-9aa2-2944-ba38-e5736963ec12 path .@plugins
ID 2758 gen 157876 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 256c36c5-7033-a945-a2db-b6a334a8419f path v2025079-0824
ID 2759 gen 157859 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 88942ee6-8b52-3d4d-b972-5de2d6764728 path v2025079-2324
ID 2762 gen 159833 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 6d636914-35a0-3f42-9486-bf5d673b94c5 path <FS_TREE>/base/.@snapshots/v20250710-0936
ID 2763 gen 159836 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid e99df217-4946-a740-bba9-99f64f1a0d69 path <FS_TREE>/base/.@snapshots/v20250710-0951

as you can see, the snapshots created in ADM are directly under top level 5 and if you list them under /volume1 (which is just the mount point for the /base subvolume), they are not found directly underneath (despite them being mounted there), which is why you see them being under their own <FS_TREE>.

Conversely, the ones that you can create directly from the cli under volume1, appear as top level 256 and they are under /base if you list the subvolumes under /mnt/rootvol.

I hope this has been useful.

This entry was edited (3 days ago)
in reply to berdario

lemmy - Link to source

berdario

PS, while I was closing the dozens of tabs that I opened to investigate how everything fits together, a note on what I wrote earlier:

this doesn’t mean that once mounted, the disk will be integrated in the ADM ui (you’re not going to be able to see it in the “External Devices” ui, nor be able to select it as a destination in the “Backup & Restore” ui).


mounting the disk on a path already accessible by ADM file explorer doesn't work because of permission issues, similar to the immutable flag that you can see with lsattr... but someone on Reddit had another workaround:

reddit.com/r/asustor/comments/…

I mounted the opened device to another path already accessible by ADM file explorer. I don't think it will matter where really. But in my case I made two partitions on an external USB drive. The first partition is a small exFat formatted (10GB). The second partition takes up the rest of the drive and is formatted with cryptsetup (LUKS). Finally, to use this I open the LUKS device and mount it to a location in the first partition (which is automatically mounted by ADM)

Reddit - The heart of the internet

www.reddit.com
This entry was edited (3 days ago)

lemmy - Link to source

Yet another distro choice help post

So sitrep:

Newish desktop
- i7-13700K
- 64Gb DDR5 6000Mhz
- RTX 3070Ti
- MSI PRO Z790-P
(WiFi is not a factor, permanent ethernet connection.)

Needs:
- Gaming
- Music composing
- Coding (Mostly python)
- Video editing

I've been using Linux on and off throughout the years, but lately I've fallen out of the loop somewhat. Started with Slackware around 1998, Kubuntu in the 2000's, Ubuntu 2010's, Kali and Mandrake 2020's -> on my laptop, Ubuntu server on my RasPi. At work, we have a few Fedora servers I have to maintain. So not a complete novice, but somewhat obsolete info.

I have been looking at the immutable distros, like Bazzite and Pop!_OS as I've done the whole song and dance of constantly repairing my distro because of various issues, and I'd like my main recreational machine & distro to be low maintenance, I get to fix linux servers at work enough already, I don't want to bring that home.

With gaming, I've understood that linux has come a loooooong way since I last tried sometime around TBC Launch for WoW when Wine barely worked with it.

Music composing is a little annoying, since apparently both Ableton and FL studio are not an option. I've heard good things about Reaper, but I'll have to do some more research. Feel free to educate me on this topic if you have some insider info. I don't play live sets, just compose and mix.

Video editing, currently I use Davinci Resolve, and apparently it works fine on Linux, just some limitations and shenanigans with codecs. Alternatives are welcome, I don't need 90% of what resolve offers, I can make do with a simpler software as well.

Thank you kindly in advance for departing thine wisdom.

EDIT: Ended up installing Bazzite, and KVM virtualizing OpenSuse Tumbleweed and vanilla Fedora, keeping my backups for now on the NAS so I will be able to easily nuke & go with Tumbleweed (I think) next, since so many people seem to swear by it. Thank you everyone for the great advice!

This entry was edited (1 day ago)

lemmy - Link to source

Introduction - Steve's Tutorial on Jujutsu, an alternative front-end to git

Jujutsu is essentially an alternative front-end or "porcelain" to git, both magnificiently simplified and powerful.

I tried it after using Emacs Magit for about six or seven years, and jujutsu is really easier to use than git and useful if one wants a tidy public history of changes (with "tidy" and "public" as Linus Torvalds recommends). Plus it is fully compatible to git as backend - other contributors will not even note you are using it.

Introduction - Steve's Jujutsu Tutorial

steveklabnik.github.io
This entry was edited (4 days ago)
in reply to paequ2

lemmy - Link to source

HaraldvonBlauzahn

Another useful property is that while jujutsu does have worktrees, like git, in many cases where one would use git worktrees (for example when writing accompanying documentation ) it is just easier to use another line of changes (what is a branch in git).

Alas, that jujutsu does not store local change sets automatically on a remote git repo (this happens only when you update and push a git branch), means that still-mutable local changes are not automatically transferred to another computer you work on. And unpublished changes are naturally mutable in jujutsu. But you can safely copy a jj repo via rsync, as changes in jj metadata are thread-safe and atomic. The other way is of course to push a work-in-progress ("WIP") git branch which can mutate and is therefore not allowed to be merged by other people.

This entry was edited (4 days ago)
in reply to HaraldvonBlauzahn

lemmy - Link to source

ugo

That’s not really how one would use worktrees in git. Worktrees are useful in the case when e.g. you are working on version 0.15 of your software that has many breaking changes to version 0.14 (perhaps even on a build system level) and you need to release a 0.14.1 patch. Worktrees separate directories which means you don’t need to stash or do a wip commit, nor clear you 0.15 build artefacts. Just cd to a different worktree, checkout the 0.14 branch, create and checkout the 0.14.1 branch, clear build artifacts in a different directory from your main development one, and start working.

When done, just cd back and keep working again without switching branches, clearing artifacts, or doing full rebuilds of the in-development 0.15 version.

Plus, git does not store change sets or branches or anything on any remote unless you push them either, so if you’re having that problem just stop pushing things you don’t want to push. You can totally rsync a git repo, just ensure it’s at rest. Otherwise do what you should be doing anyway: set the repo on another machine as a remote of the other repo, so you can git pull my_private_machine feature/my_private_branch without needing to push to a central repo.

I’m sure jujutsu has many advantages, but it also reads to me like you’re misunderstanding the git model. Which can be a fair critique of git to be fair, but then we would need to talk about what about the git model people have trouble with, why, and how to address those issues, and so far I haven’t seen any kind of research in that direction from jujutsu (not that I’ve been looking particularly hard)

This entry was edited (4 days ago)
in reply to ugo

lemmy - Link to source

HaraldvonBlauzahn

One difference between using worktrees and branches in git is that in git you usually have uncommited stuff that's not finished, and worktrees are a way to avoid committing this. And you want to avoid committing early because it is hard to clean-up later. This hesistsnce to commit is not necessary at all in jujutsu - any change to the source files is already captured and will be restored once you go back to that changeset. There are other cases where you use worktrees in git e.g. to isolate a build and an hour-long integration test running it in parallel to your ongoing work, and in thar cases, you'd use workspaces in jujutsu like you'd in git.

but then we would need to talk about what about the git model people have trouble with, why


Too many commands that do subtly and irreversivly things on the repo, with potentially messed-up interim states, only to do the conceptually much simpler task to edit and manipulate the directed acyclic graph of commits.

In short, jujutsu is a commit graph editor and does the same with perhaps 10% of the complexity of git. The man pages on the git reset, branch and merge commands are already larger than the whole - and detailed!- documentation of jujutsu.

Steve Klabnik explains this much better than I can here in his blog that I posted.

This entry was edited (4 days ago)
in reply to HaraldvonBlauzahn

lemmy - Link to source

ugo

It is simply not my experience that cleaning up commits after committing early is difficult in git. Amending a commit is a single -a flag away from the git commit command. The opposite problem is when you do too much work and want to split it into multiple commit rather than a huge one, in which case git add -p is again a single flag away from git add.

In general, git’s entire model is to allow you to work first, and do administrative tasks (including tidying up your commit history etc) later.

And almost nothing is truly destructive in git, the vast majority of cases can be fixed by judicious use of git reflog.

The only cases I’ve ran into where git repos became corrupted were caused by external tools, mainly GUIs that label buttons with git commands that do something different when clicked (like the button labeled push actually doing git push —all for no good reason, and such things) with users that have no idea how git works that have been trained just by telling them “click this to save your work, click this to get the last version of the code”

in reply to paequ2

lemmy - Link to source

atzanteol

Technically true - but it looks like jj does a lot of history re-writing which would require a lot of care to be taken when working on a shared codebase.

The page on remotes has some cautions in it.

We need the --allow-backwards flag to set the trunk branch to the previous commit because it is a dangerous operation: if we had pushed trunk, things would get weird when we try and push now. We've kept it all local, so there's no issues with doing this.

Working with remotes, e.g., GitHub - Steve's Jujutsu Tutorial

steveklabnik.github.io
in reply to HaraldvonBlauzahn

lemmy - Link to source

atzanteol

Hrm... It looks interesting but it seems too dedicated to crafting "the perfect commit".

Changing our description changed the commit ID! This is why we have both IDs: the change ID has not changed, but the commit ID has. This allows us to evolve our commit over time, but still have a stable way to refer to all versions of it.


I don't want to "evolve a commit" - I want to capture my changes over time. If I decide later that I want to prepare the commit for merging I will.

I hate it because it's different - but even trying to give it a "benefit of the doubt" I really can't see this as better. It's not like it's difficult to create a "tidy" commit with git as is.

And as far as "easier to use goes"... well... Here's how you get a list of anonymous branches

jj log -r 'heads(all())'

And since they eschew branches with names you get to memorize hash strings instead of branch names that describe the thing you were doing?
jj new pzoqtwuv yykpmnuq -m "merge better documentation"
# vs. 
git merge my_branch_Name

I'm unconvinced. Though jj undo looks neat (and also crazy dangerous unless you can undo an undo?).
This entry was edited (3 days ago)
in reply to atzanteol

lemmy - Link to source

HaraldvonBlauzahn

And since they eschew branches with names you get to memorize hash strings instead of branch names that describe the thing you were doing?


No trouble, you can still name branches if you want. And no, you don't have to type the whole changeset hash, the first one to three letters are usually sufficient.

Also, branch names are not a permanent thing, they disappear after you merged them.

If you want, to can put an empty commit with the description of what you want to do at the top of your changes, and then use "jj split" to move changes to different commits before it.
There are several common work flows which are explained in Klabnik's blog post.

in reply to HaraldvonBlauzahn

lemmy - Link to source

atzanteol

If the readability of the commit history really does not matter to you - for exsmple, nobody needs to read this code again - it’s possible that jj does not give you enough advantage. Everyone works different.


I mean... It does and I will use git to manage commit histories as necessary. I don't see jj as solving that problem or even making it easier. Doing a single squash-commit or a rebase -i when I merge a branch is relatively trivial.

And from what I can tell it's much easier to do a git pull upstream master than to do jj new skdfsld dskfjas since you'll likely have to lookup those hashes? I mean I wouldn't remember them.

in reply to HaraldvonBlauzahn

lemmy - Link to source

atzanteol

One takes them from the last commit log and uses the first few letters


So - it's not the length of the random garbage that is the issue it's the fact that it's random garbage that I have no chance of remembering after 5 seconds and switching between branches. All my branches are instead random hashes that I'll need to lookup or remember.

I've read through the blog. It sounds like they've taken the minor inconvenience of doing a git merge --squash and distributed that pain across every-single-commit you're ever going to make instead. All to get "tidy commits" which were possible before anyway.

I was actually rather interested in the idea of jj being something that made history-rewriting easier (e.g. for removing bad commits with passwords and the like). But the fact that it almost completely throws out the entire concept of working on named branches (yes you can have them - but "One interesting thing about branches in jj that's different than branches in git is that branches do not automatically move." - genius) is just ridiculous. And to claim that it's now simpler just seems like gaslighting.

lemmy - Link to source

Looking for a music player

I'm looking for a music player on Pop!_OS that supports playlists, repeating a single track while still being able to swap tracks in the playlist, and also supports fading between songs and when stopping playback. And ideas on what to try?

So far I've tried VLC, Audacious, and Rhythmbox, but none of those seem to support all of those requirements. (Rhythmbox was close but the repeat one from the toolbar plugin doesn't work.)

Edit: Got it working in Rhythmbox after toggling the repeat options a few more times. Still curious if there are other options out there though.

This entry was edited (4 days ago)

lemmy - Link to source

Intel axes another 2,400 jobs in Oregon announced Friday.
Even with all those incentive dollars, tax breaks, and innumerable concessions this will always be what happens. Governments are captured by corporate money, power and influence and then governments give away the people's wealth and corporations take.

Intel axes thousands of technicians and engineers in sweeping U.S. layoffs — cutting 4,000 positions in the U.S., 2,392 in Oregon

Despite claims that layoffs target mostly mid-level managers.
Anton Shilov (Tom's Hardware)

lemmy - Link to source

This new SSD will literally self destruct if you push the big red button it comes with — Team Group posts video of data destruction in action
The ‘H/W Quick Erase’ function, which fries the flash memory, should probably have a more forbidding name.

This new SSD will literally self destruct if you push the big red button it comes with — Team Group posts video of data destruction in action

Mark Tyson (Tom's Hardware)

lemmy - Link to source

KDE's Plasma Bigscreen For TV's Still In Development

How many of you knew about this project?

Info

Plasma Bigscreen is a Plasma-based shell (desktop environment) for TVs and other large displays. It is designed to be used with arrow navigation using remotes or controllers.

Links

Plasma Bigscreen Website

Diving into Plasma Bigscreen

KDE Get Involved

Diving into Plasma Bigscreen | espidev

I have been a long time Plasma Mobile contributor, but I have always had a keen interest in having Linux on my TV! I have noticed that in the past few months, the Plasma Bigscreen project has had some interest from people wanting to contribute, but t…
espi.dev
This entry was edited (4 days ago)

lemmy - Link to source

no gods no masters only jesus and trump

what does no gods no masters mean?


it means being free from all the liberal elites and fake news media who just want to control us and take away our freedom and tell me what to think and how to live my life and whats safe to eat

trump and jesus DO NOT COUNT


theyre not part of the establishment and theyre not trying to control me okay trump is a rebel and a fighter and jesus is the ultimate rebel and free thinker he went against the establishment and challenged the powers that be like his dad and stuff

i believe in being free and independent and not being controlled by anyone or anything that isnt on my side like for example the mcdonalds corporation what do you think

in reply to pleasestopasking

lemmy - Link to source

Frenchfryenjoyer (she/her)

When you buy crisps sometimes there's just.... hardly any seasoning on them?? I'm talking crisps like Doritos or BBQ Beef Hula Hoops. There can be a massive difference with the amount of seasoning between batches and I'm sure they do it on purpose to make you buy more of them so you can get that really well seasoned batch you loved again lol. i don't actually believe this but I'd be interested to know why
in reply to cm0002

lemmy - Link to source

🇰 🌀 🇱 🇦 🇳 🇦 🇰 🇮

I would prefer it if only my decisions affected my life, and not the decisions of other people. Want a well-paying job you're already good at? Better hope that another person decides you deserve it. Same with getting a place to live. It was quite a shock when I learned you had to fucking interview to rent an apartment, and may not be approved even if you have the money.
This entry was edited (4 days ago)
in reply to 🇰 🌀 🇱 🇦 🇳 🇦 🇰 🇮

lemmy - Link to source

cm0002

Same with getting a place to live. It was quite a shock when I learned you had to fucking interview to rent an apartment, and may not be approved even if you have the money.


Wait what? I've never heard of such a thing in any of the places I've lived. BS like needing 3x the rent or 1st, 2nd and last months rent + deposit yea

But needing to interview‽ That's a new one LMAO

lemmy - Link to source

Two French MPs to join new Gaza-bound aid boat
The Handala, operated by the Freedom Flotilla Coalition, left the port of Syracuse shortly after 12:00 pm local time, according to a journalist of the French press agency AFP, carrying about fifteen activists.

Several dozen people, some holding Palestinian flags and others wearing keffiyeh scarves, gathered at the port to cheer the boat's departure with cries of "Free Palestine".

The former Norwegian trawler, loaded with medical supplies, food, children's equipment and medicine, will sail for about a week in the Mediterranean, covering roughly 1,800 kilometres, in the hope of reaching Gaza's coast.
Palestinians inspect the wreckage of a gas station destroyed in an Israeli airstrike in Deir al-Balah, central Gaza Strip, Saturday, July 12, 2025.


Two French MPs to join new Gaza-bound aid boat

A Gaza-bound boat carrying pro-Palestinian activists, including members of France's hard-left LFI party, and humanitarian aid left Sicily on Sunday, over a month after Israel detained and deported people aboard a previous vessel. 
RFI

lemmy - Link to source

Two French MPs to join new Gaza-bound aid boat
The Handala, operated by the Freedom Flotilla Coalition, left the port of Syracuse shortly after 12:00 pm local time, according to a journalist of the French press agency AFP, carrying about fifteen activists.

Several dozen people, some holding Palestinian flags and others wearing keffiyeh scarves, gathered at the port to cheer the boat's departure with cries of "Free Palestine".

The former Norwegian trawler, loaded with medical supplies, food, children's equipment and medicine, will sail for about a week in the Mediterranean, covering roughly 1,800 kilometres, in the hope of reaching Gaza's coast.
Palestinians inspect the wreckage of a gas station destroyed in an Israeli airstrike in Deir al-Balah, central Gaza Strip, Saturday, July 12, 2025.


Two French MPs to join new Gaza-bound aid boat

A Gaza-bound boat carrying pro-Palestinian activists, including members of France's hard-left LFI party, and humanitarian aid left Sicily on Sunday, over a month after Israel detained and deported people aboard a previous vessel. 
RFI

lemmy - Link to source

Recommend a simple, small cheap laptop < 15" I can chuck in my bag for use in coffee shops!
  • I'll buy used, so don't want latest and greatest. It won't be my main laptop.
  • to run linux obviously.
  • good battery life, light, not too small to use, but large enough to type on (obviously can do without numeric keypad). not too fragile!
  • I'll be doing some light python work, perhaps some c/c++ but I'm not after a workhorse, just something for quickly fixing bugs, or making notes on
  • sub 200 GBP / 250USD I guess

I'd be interested in hearing recommendations, and also what to avoid!

This entry was edited (4 days ago)

lemmy - Link to source

Several people injured in second night of anti-migrant riots in Spanish town
Several people were hurt in a second night of anti-migrant unrest in the town of Torre Pacheco in south-east Spain after a pensioner was beaten up, authorities said.

Despite a major police presence, groups armed with batons roamed the streets looking for people with foreign origins, the regional newspaper La Opinión de Murcia reported.

The regional government did not say how many people were injured but stated that at least one person had been arrested over the violence.

The unrest erupted after a 68-year-old man told Spanish media he was beaten up in the street on Wednesday by three young people of north African origin. The attack was filmed and put on social media.


Several people injured in second night of anti-migrant unrest in Spanish town

Authorities say at least one person arrested after disorder broke out in Torre Pacheco over attack on pensioner
Guardian staff reporter (The Guardian)

lemmy - Link to source

Macron calls on EU to ‘defend European interests resolutely’ from Trump tariffs
The French president, Emmanuel Macron, has called on the EU to “defend European interests resolutely” after Donald Trump threatened to impose 30% tariffs on nearly all imports from the EU.

It came as the EU moved to de-escalate tensions after the blunt move by Trump on Saturday. The bloc declared a further pause on €21bn of retaliatory tariffs until 1 August, dovetailing with the US president’s new deal deadline.

At the same time, the European Commission president, Ursula von der Leyen, and the Indonesian president, Prabowo Subianto, announced a “political agreement” on a free trade deal on Sunday, ending nine years of negotiations.


Macron calls on EU to ‘defend European interests resolutely’ from Trump tariffs

French president says bloc should be ready for trade war after 30% tariff threat but other EU leaders call for calm
Lisa O'Carroll (The Guardian)

lemmy - Link to source

When Britain's 'feminists' cheer for bombs and sneer at Palestinian suffering
A familiar breed of British pundit has resurfaced - loud, self-declared feminists whose outrage is as selective as it is performative, and whose moral compass somehow always aligns with western state power.

They remain silent as Gaza burns, but are quick to find their voice to cheer on Israel and its allies as they threaten to flatten Iran - civilian casualties be damned.

During Israel's recent strikes on Iran, the radical feminist journalist and co‑founder of Justice for Women, Julie Bindel, branded leftist anti-war feminists "Team Iran" sympathisers. It was a disingenuous, grotesquely misleading and dangerously ideological accusation, but not a surprising one.

While women in Gaza bleed in silence, these pundits reserve their fury for pro-Palestine protesters - smearing them as extremists, branding solidarity as terrorism, twisting every act of dissent into an endorsement of "jihad" and weaponising antisemitism to crush critique.


When Britain's 'feminists' cheer for bombs and sneer at Palestinian suffering

The UK's most prominent 'feminists' ignore women in Gaza under bombs and siege, but speak up to manufacture consent for western wars or attack the anti-war left
Middle East Eye

lemmy - Link to source

Mac Plus with a mysterious fault taught me a good lesson | Adrian's Digital Basement
It's time for another 68k Mac repair. I thought it would be a quick and easy fix, but this turned out to be a but more mysterious.

-- Info

Microbug:

DM (dump memory)

SM (set memory)

Video page:

U15D VIA 6522 PA6 Pin 8 to U4G 74AS253 Pin 4

From microbug, I was writing to

3F A700 Screen Buffer 1

00 0000 - 3F FFFF 0M - 4MB Total address space

00 0000 - 0F FFFF 0M - 1MB

00 0000 - 07 FFFF 0K - 512k

xx FCFF Screen1 memory end

xx A700 Screen1 Memory start

xx 7C7F Screen2 Memory End

xx 2700 Screen2 Memory Start


Mac Plus with a mysterious fault taught me a good lesson

It's time for another 68k Mac repair. I thought it would be a quick and easy fix, but this turned out to be a but more mysterious. -- InfoMicrobug:DM (dump m...
YouTube
This entry was edited (4 days ago)

lemmy - Link to source

Israeli settlers beat Palestinian-American to death, fatally shoot another
By Fayha Shalash in Ramallah, occupied Palestine
Published date: 12 July 2025 15:49 BST

"The attack began when a large group of settlers targeted dozens of #Palestinians attempting to access their land between the villages of Sinjil and al-Mazra'a al-Sharqiya, east of Ramallah.

Such assaults have become a regular occurrence, taking place almost every Friday, as part of efforts to intimidate villagers and drive them off land targeted for settlement."

"'Musalat owned a home in the area and died trying to defend it' - Abdul Samad Abdul Aziz, al-Mazra'a al-Sharqiya municipality member"


Israeli settlers beat Palestinian-American to death, fatally shoot another

Israeli settlers beat a Palestinian-American man to death and fatally shot another during a coordinated assault on villagers in the occupied West Bank on Friday.
Fayha Shalash (Middle East Eye)

lemmy - Link to source

Israeli settlers beat Palestinian-American to death, fatally shoot another
By Fayha Shalash in Ramallah, occupied Palestine
Published date: 12 July 2025 15:49 BST

"The attack began when a large group of settlers targeted dozens of #Palestinians attempting to access their land between the villages of Sinjil and al-Mazra'a al-Sharqiya, east of Ramallah.

Such assaults have become a regular occurrence, taking place almost every Friday, as part of efforts to intimidate villagers and drive them off land targeted for settlement."

"'Musalat owned a home in the area and died trying to defend it' - Abdul Samad Abdul Aziz, al-Mazra'a al-Sharqiya municipality member"


Israeli settlers beat Palestinian-American to death, fatally shoot another

Israeli settlers beat a Palestinian-American man to death and fatally shot another during a coordinated assault on villagers in the occupied West Bank on Friday.
Fayha Shalash (Middle East Eye)
in reply to Günther Unlustig 🍄

lemmy - Link to source

just_another_person

Okay, just from the pictures, let me say what I think is happening:

1) You're growing too many different kinds of plants in a small space.
2) You're growing Cannabis, which draws literally every sweet-sensing pest.
3) Those things on the underside of the leaves you posted are Ladybug larvae, and they are GOOD.

You clear this up in about a week with a few simple things:

1) Get a clutch of ladybugs from your local nursery or plant stores. This should be available almost everywhere in the US.
2) Although I don't want to advocate for this because I love local pollinators, get a pheromone trap for the stinging insects. They cost about $10, and don't lure honeybees, but WILL kill local carpenter bees and yellow jackets.
3) For the aphids, get a soap-based spray, or make it yourself. It's pretty much just dish soap and water, but there are guides online. Spray EVERY MORNING AND AFTER SUNSET. This plus the ladybug clutch will make quick work of the aphids.
4) I see you have Basil in containers, move that AWAY from the plants that are infested with scale or aphids.
5) Depending on where you live, your nursery's may sell Mantids. Get them. They are beneficial, but ruthless in eating and killing anything in their grasp, including wasps.
6) If you have wasps around, there is a nest nearby. Inspect your building awnings, trees, or under anything shaded and find that nest. It's not two doors over, it's within 100ft of where you got stung. Find it, set a pheromone trap around your plants (not where you think the nest is), then after a lot of them are dead, go find and remove the nests next.

Don't leave standing water around, and make sure that you stay on schedule with the soap spray. Most of this will be cleared in just a week.

Edit: also for the slugs and stuff, you're growing a lot of stuff in a mostly shaded area, so you're just asking for slugs. Line a general area around your plants with Diatomaceous Earth. It's cheap, easy to use, and doesn't harm anything that doesn't crawl. Also, organic.

Double edit: DO NOT spray this black bugs with the striped butts. Those will be ladybugs soon that eat all the aphids. They are good.

This entry was edited (4 days ago)
in reply to just_another_person

lemmy - Link to source

Günther Unlustig 🍄

You're growing Cannabis, which draws literally every sweet-sensing pest.


Funnily enough, my weed is pretty much the only thing (and chillis) that isn't much affected.
The willow is the worst one, and the pepino second.

Those things on the underside of the leaves you posted are Ladybug larvae, and they are GOOD.


Those larvae pictures are already a bit older, maybe two weeks?
They probably got killed by the ants or wasps, because I rarely see them around anymore.
I also rarely see any other aphid eating insects anymore, only ants and ants carrying carcasses 🙁

in reply to toomanypancakes

lemmy - Link to source

dontkickducks

I wouldn't say really positive. But it changed a daily slightly negative into a daily slightly positive.

At work I regularly need to take short notes. I like to fill the page to the full. But it gets messier and more complicated aa the day goes on. So I'd strike through and cross out notes I don't need anymore.
The thing is, crossing things out triggers a feeling of making mistakes. So instead of crossing out I started using check-marks (Dutch-style)., which feels like a succes and is also a quick fun flourish to draw. So small annoyances have turned into small victories.

geschreven symbool

Bijdragers aan Wikimedia-projecten (Wikimedia Foundation, Inc.)
in reply to dontkickducks

mbin - Link to source

Maestro

I found a slightly different system online once. You mark your todo list with a dash (-) in front. If it's done, cross it to make a plus sign (+). If it's something that you postponed or moved to another list/page, turn the dash into an arrow (->). I adapted it from the dash-plus system years ago: patrickrhone.net/the-dash-plus…

The Dash/Plus System – Rhoneisms

www.patrickrhone.net

lemmy - Link to source

Federal Agents Spray Tear Gas at Protesters, Children During ICE Raids at California Farms

Federal Agents Spray Tear Gas at Protesters, Children During ICE Raids at California Farms

"ICE was conducting a raid using disproportionate displays of force against local farmworkers and our agricultural community," said U.S. Rep. Salud Carbajal, who was denied entry to one farm where he was attempting to provide oversight.
julia-conley (Common Dreams)
Unknown parent

lemmy - Link to source

cm0002

It's actually quite on-brand for apple.

Usually, Android manufacturers come up with a feature that's actually half decent, but needs a good polish to actually take off.

Apple comes in, refines it to that polish + messaging with their cult, it takes off and Apple claims credit

lemmy - Link to source

Ro Khanna is trying to force Congress to vote on releasing the Epstein files
The speaker of the house and Zionist-first Mike Johnson will probably kill this. It would be nice to see if the democrats would vote this through if they gain the house in 2026. My guess, they would not. Epstein had "friends" on both sides of the aisle.

Source on Xitter (xcancel link)

Ro Khanna (@RoKhanna)

Why are the Epstein files still hidden? Who are the rich & powerful being protected? On Tuesday, I'm introducing an amendment to force a vote demanding the FULL Epstein files be released to the public.
Nitter
This entry was edited (4 days ago)

lemmy - Link to source

Dual carbon sequestration with photosynthetic living materials
ETH Zurich researchers have developed a groundbreaking "living material" that actively captures carbon dioxide from the atmosphere through two mechanisms: biomass production and mineral formation[^1][^2].

The material combines cyanobacteria (photosynthetic bacteria) embedded within a printable hydrogel matrix. The cyanobacteria convert CO2 into biomass through photosynthesis while simultaneously triggering the formation of solid carbonate minerals - a process called microbially induced carbonate precipitation (MICP)[^1].

Key achievements of the material include:

  • Sequestered 2.2 mg of CO2 per gram of hydrogel over 30 days
  • Captured 26 mg of CO2 per gram over 400 days in mineral form
  • Maintained viability for over one year
  • Required only sunlight and artificial seawater to function
  • Can be 3D printed into various structures[^1]

The research team demonstrated practical applications by creating:

  • A 3-meter high tree-trunk structure at the Venice Architecture Biennale that can bind 18kg of CO2 annually
  • Building facade coatings that could capture carbon throughout a building's lifecycle
  • Lattice structures that passively transport nutrients through capillary action[^2]

"As a building material, it could help to store CO2 directly in buildings in the future," said Mark Tibbitt, Professor of Macromolecular Engineering at ETH Zurich[^2].

The material represents a low-maintenance, environmentally friendly approach to carbon capture that operates at ambient conditions using atmospheric CO2, contrasting with industrial methods requiring concentrated CO2 sources and controlled conditions[^1].

[^1]: Nature Communications - Dual carbon sequestration with photosynthetic living materials

[^2]: ETH Zurich - A building material that lives and stores carbon


A building material that lives and stores carbon

Researchers are developing a living material that actively extracts carbon dioxide from the atmosphere. Photosynthetic cyanobacteria grow inside it, forming biomass and solid minerals and thus binding CO2 in two different manners. 
ETH Zurich

lemmy - Link to source

Investigating intentionality in elephant gestural communication
A groundbreaking study published in July 2025 demonstrates that African savannah elephants use intentional gestures to communicate their goals, similar to great apes[^1]. The research team presented semi-captive elephants with desired and undesired items, recording their communication attempts when experimenters met, partially met, or failed to meet their goals[^1].

The study identified 38 different gesture types that elephants used almost exclusively when a visually attentive experimenter was present[^1]. The elephants showed three key criteria for intentional communication:

  1. Audience directedness - signaling only when someone was watching
  2. Persistence - continuing to gesture when goals were partially met
  3. Elaboration - using new signals when communication failed

The research was conducted at the Jafuta Reserve in Zimbabwe, where elephants combined specific vocalizations with gestures in greeting behaviors[^6]. They used different types of signals including:

  • Silent-visual gestures
  • Audible gestures
  • Tactile gestures
  • Rumble vocalizations

The findings reveal that elephants, like apes, assess the communicative effectiveness of their gesturing and adjust their signals based on the audience's visual attention[^6]. This expands understanding of intentional communication beyond the primate lineage[^9].

[^1]: Royal Society Open Science - Investigating intentionality in elephant gestural communication

[^6]: Nature - Multimodal communication and audience directedness in the greeting behaviour of semi-captive African savannah elephants

[^9]: Pangea Trust - Gestures and greetings used by elephants show intentional multimodal communication


Investigating intentionality in elephant gestural communication – DOAJ

A crucial feature of language is the ability to communicate cognitive goals to a specific audience, i.e. goal-directed intentionality. Core criteria for...
doaj.org

lemmy - Link to source

【#TheHagueGroup】To Bogotá | Progressive International (2025-07-12)
【#TheHagueGroup】To Bogotá | Progressive International (2025-07-12)

progressive.international/wire…
———

>> This week, more than 25 states from around the world will gather in Bogotá, Colombia, for the “Emergency Conference” to halt the Gaza genocide: the most ambitious multilateral response since Israel began its campaign of devastation two years ago.

>> “The Bogotá conference will go down as the moment in history that states finally stood up to do the right thing,” said UN Special Rapporteur #FrancescaAlbanese, calling the formation of The Hague Group the “most significant political development of the last 20 months.”

>> Jointly convened by Colombia and South Africa, The Hague Group’s Co-Chairs, the conference brings together states far beyond the boundaries of the Group — from Algeria to Brazil, China to Spain, Indonesia to Qatar — “to move from condemnation to collective action,” in the words of Colombian President Gustavo Petro…

#BogotaConference #StopGenocide
@palestine@a.gup.pe


PI Briefing | No. 25 | To Bogotá

Convened by Colombia and South Africa as co-chairs of The Hague Group, the Emergency Ministerial Conference marks the boldest stand yet against the Gaza genocide and the collapse of the multilateral order.
Progressive International

lemmy - Link to source

Blender HDR and the reference white issue | About Blender's HDR support on Wayland

From Sebastian Wick’s Mastodon

Blender is getting HDR on Linux via Wayland before Windows! This isn't by accident, but shows how creating a system with a different design creates better results for users and application developers.


Firefox is in this same boat too. It will get HDR support on Linux* sooner than Windows. Firefox currently only supports HDR on MacOS.


Blender HDR and the reference white issue

The latest alpha of the upcoming Blender 5.0 release comes with High Dynamic Range (HDR) support for Linux on Wayland which will, if everything works out, make it into the final Blender 5.0 release on October 1, 2025.
swick's blog
This entry was edited (4 days ago)
in reply to cheese_greater

lemmy - Link to source

Rikudou_Sage

Very often a virtual particle–antiparticle pair appears and because they're very happy they started existing, they immediately hug each other not knowing that will cause them to annihilate each other and disappear.

Every once in a while, the pair appears in a very interesting position: one is outside the event horizon of a black hole (let's call this one Pinocchio) and the other inside it (let's call it 3735928559). Because nothing can escape a black hole, they can't really hug, so Pinocchio says "I'm a real ~~boy~~ particle" and stops being virtual and becomes real, while 3735928559 continues its descent into ~~madness~~ singularity.

Unfortunately, the process means there now exists something (Pinocchio) where there wasn't anything before and that takes energy. And that energy comes from the particle that stayed behind which is now part of the black hole, so it effectively takes energy out of the black hole. You may have heard that energy cannot be created or destroyed, only transformed, that's essentially what happens here.

The Pinocchios go away from the black hole, so they can end up basically anywhere in the universe.

As for the timescales, they entirely depend on the black hole's size. Really tiny black holes evaporate in a matter of seconds, the supermassive ones in a matter of trillions of trillions of trillions of trillions... years.

In fact, black holes will be the last macroscopic structures to exist in the universe because the evaporation is extremely slow - every planet and every star and every gas cloud and every atom will cease to exist long before the last black hole evaporates.

This entry was edited (4 days ago)
in reply to return2ozma

lemmy - Link to source

Ceedoestrees

Soviet style mass apartment complexes to combat homelessness but you have to download an app to get in and out, and the app collects and sells all your data. There's a concierge who does spot checks but they accept bribes in fresh fruit, vegetables and old N64 games.

The internets. Multiple internets, like different streaming services and you need to pay a subscription to each one to access all the websites.

Rail guns. Everyone will have a rail gun. It will be awesome.

lemmy - Link to source

Arch Linux error /usr/lib/firmware/nvidia/ exists in filesystem
linuxeasy.org/arch-linux-e-il-…

Arch Linux e il problema di Linux Firmware NVIDIA risulta già nel filesystem

Quando si cerca di aggiornare il sistema operativo o installare il pacchetto linux-firmware-nvidia su Arch Linux, può capitare di incappare nell’errore
Ferramosca Roberto (Linux Easy)
This entry was edited (4 days ago)
in reply to linuxeasy

lemmy - Link to source

𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

The package archnews2 also provides an arch news reader. This issue was also announced in Arch forums before it was rolled out - I saw it in Lemmy.

But, yeah, you really do have to read archnews release notes. Frankly, it annoys me a bit - pacman should have the concept of breaking changes and show related news before upgrades. I think one of the news packages (maybe archnews2?) has a config setting that always displays news before upgrades, but it's only annoying because it is ignorant of whether the news item affects any given system, so it's often just noise; I think I turned it off because it kept showing me the same news every time.

It's the worst part of Arch, and it's poorly handled. I don't know of a rolling release that handles informing the user of, breaking changes better, though.

in reply to linuxeasy

lemmy - Link to source

rowinxavier

The good thing is it fails properly. This should not continue because it would break your system. The package ownership of those files has changed but the package manager would have to remove the current owning package then install the new owning package after in two separate transactions. Technically this could be make possible I think it would lead to bad packaging and would be bad practice. Happily it fails loudly and makes next steps fairly clear.
in reply to WhiteQuasar

lemmy - Link to source

utopiah

If you like working in slow motion, yes, sure.

Source : I have a Banana-Pi SBC banana-pi.org/en/banana-pi-sbc… and... it works, running Linux proper, with a desktop environment, which is in itself pretty cool IMHO but damn, you have to be patient. That being said "just" already being at that stage on economically affordable hardware is amazing. We are probably not far, say few years at most, with usable RISC-V chips for mundane tasks, e.g. text authoring, coding, Web browsing, but don't expect compilation of a browser, Blender, or gaming on this for few more years. IMHO it will go fast because it's catching up so the path is rather well laid down, which is much harder than innovating and pushing the envelope.

Banana Pi BPI-F3 with SpacemiT K1 8 core RISC-V chip,4G RAM and 16G eMMC-Banana Pi open source hardware community,Single board computer, Router,IoT,STEM education

Banana Pi is an open source hardware project lead by Guangdong BIPAI CPA.,LIMITED.It focuses on the open source hardware development board of ARM and MCU series, provides open software and hardware platform, and creates the basic technology developme…
www.banana-pi.org
in reply to WhiteQuasar

lemmy - Link to source

utopiah

I guess it depends what you mean by "chip production".

AFAICT mostly via Chip War (2022) and reading a bit on the topic there are few bottlenecks, e.g chip design IP like ARM (UK) or lithography machines like ASML (NL) or high efficiency chip production like TSMC (Taiwan) but overall the grip from the US is mostly on democratization and scale with AMD, NVIDIA, Broadcom or even Intel, namely making a LOT of chips, not necessarily high end (some are) or mobile (also some), for a relatively low price. What I mean is that China is already claiming that they are producing about on-par IPS with e.g. Loongson.

So yes there are for sure incumbents based in the US that do not want RISCV and overall open architectures to make significant progress but is it fair to call them "the US" I'm not sure. Are they heavily leaning on US lawmakers to get their positions strengthened? Maybe. Maybe they do not yet do so simply because they don't believe it's a threat yet, nor it might be ever be.

I believe that in chip production you can lock production via innovation but also, like in other sectors, solely with the supply chain. ASML is powerful because they basically own their markets but also because who would contract with newcomers versus a very well established company that can provide all the insurances imaginable that they will indeed deliver on time a specific amount? Why risk it when you are already contracting with the leader?

Sure there is a potential innovator dilemma but what could prevent e.g. NVIDIA or Intel to switch to RISC-V if somehow they can dominate there too thanks to both their existing expertise but also supply chain stronghold?

in reply to BeardedGingerWonder

lemmy - Link to source

WhiteQuasar

Being an open source architecture gives everyone (China, Russia, Iran, North Korea and basically everyone else the US doesn't like, which apparently is most of world) the freedom to innovate at a fast pace, this is what I mean by security flaw. My thought that they could somewhat try to slow down the development is based on the rational thinking that 1. They are actually leading the chip develpment and 2. if someday everyone gets high performance chips (which is still not the case with RISCV yet) than everyone can get better defense industries, better intelligence systems, better military equipment. I'm not implying that they are actively doing it but that it might be in their interest to do so to maintain some kind of military egemony over their enemies, or at least to never be in a significant gap with anyone.
This entry was edited (3 days ago)
in reply to WhiteQuasar

lemmy - Link to source

BeardedGingerWonder

Risc v is an instruction set architecture not a chip design, the actual hardware implementation of any given risc v processor won't necessarily be open source and available to all, it's just a guarantee that if the spec is implemented then code compiled for risc v will run on a RISC V processor.

China has had access to x86 for years, they've not been able to implement a chip on par with current gen AMD or Intel chips.

lemmy - Link to source

New Caledonia to be declared a state in ‘historic’ agreement – but will remain French
France has announced a “historic” accord with New Caledonia in which the overseas territory, rocked by deadly separatist violence last year, would remain French but be declared a new state.

“A State of New Caledonia within the Republic: it’s a bet on trust,” the French president, Emmanuel Macron, posted on X on Saturday, hailing a “historic” agreement.

Receiving the signatories later, the president said that “after two agreements and three referendums, New Caledonia, through what you have signed, is opening a new chapter in its future in a peaceful relationship with France”.

Macron had called for talks to break a deadlock between forces loyal to France and those wanting independence. New Caledonian elected officials, as well as political, economic and civil society leaders, gathered near Paris to hammer out a constitutional framework for the territory.

After 10 days of talks, the parties agreed that a “State of New Caledonia” should be created.

Manuel Valls, the minister for overseas territories, called it an “intelligent compromise” that maintains links between France and New Caledonia, but with more sovereignty for the Pacific island.

The priority now is New Caledonia’s economic recovery.

Last year’s violence, which claimed the lives of 14 people, is estimated to have cost the territory 2bn euros ($2.3 bn), shaving 10% off its gross domestic product, he said.

The French prime minister, Francois Bayrou, said Saturday’s deal – which still requires parliamentary and referendum approval – was of “historic dimensions”.

Home to about 270,000 people and located nearly 17,000km (10,600 miles) from Paris, New Caledonia is one of several overseas territories that remain an integral part of France.

It has been ruled from Paris since the 1800s, but many indigenous Kanaks still resent France’s power over their islands and want fuller autonomy or independence.

Unrest broke out in May 2024 after Paris planned to give voting rights to thousands of non-indigenous long-term residents. Kanaks feared this would leave them in a permanent minority, crushing their chances of winning independence.

As part of the agreement, New Caledonia residents will in future only be allowed to vote after having lived 10 years on the archipelago.

The last independence referendum in New Caledonia was held in 2021, and was boycotted by pro-independence groups over the impact of the Covid-19 pandemic on the Kanak population.

It was the latest of three since 2018, all of which rejected New Caledonian independence. Since the 2021 referendum however, the political situation in the archipelago has been deadlocked.

Macron declared in early June he wanted a “new project” for New Caledonia.

The 13-page agreement announced on Saturday calls for a New Caledonian nationality, and the possibility for residents there to combine that status with French nationality.

Under the deal, a “State of New Caledonia” would be enshrined in France’s constitution, and other countries could recognise such a state.

The deal also calls for an economic and financial recovery pact that would include a renewal of the territory’s nickel processing capabilities.

Both chambers of France’s parliament are to meet in the fourth quarter of this year to vote on approving the deal, which is then to be submitted to New Caledonians in a referendum in 2026.


New Caledonia to be declared a state in ‘historic’ agreement – but will remain French

Emmanuel Macron hails ‘new chapter’ for New Caledonia as politicians agree on statehood after 10 days of talks
Guardian staff reporter (The Guardian)

lemmy - Link to source

What do you prefer: icon view or detailed list view?

Most file managers I've encountered default to icon view. One of the first things I do is set the default to detailed list view. Might be a preference for seeing names and dates over many identical folder icons, or just an old habit from using Windows. But I'd be curious to hear about the benefits of icon view and why it's usually the default in Linux GUI file managers.

What does everyone else use and any reasons to prefer one over the other?

This entry was edited (5 days ago)

lemmy - Link to source

Bots everywhere or am I losing it?

While browsing the fediverse I come across more and more accounts that seem ... a bit off, a little uncanny. The stuff they post seems random, their comments slightly weird. What's going on, is the fediverse being overrun by bots? Or am I as a fanatic anti-AI person just losing my mind and seeing the enemy everywhere?

I hate the fact that I now question every interaction that seems a bit off - it seems such a stupid waste of my time and I'm afraid I might just end up blocking real people who happen to express themselves in a strange way - as a neurodivergent person I know how bad I would feel about being ostracized as 'too strange to be real'. How would you handle this?

in reply to Diva (she/her)

lemmy - Link to source

cm0002

Lol sure, it has absolutely nothing to do with the authoritarian regimes they worship that are just Communists-In-Name-Only/s

The receipts

cm0002

2025-05-03 16:31:33

lemmy - Link to source

Documentation of Lemmy.ml's Extremism [Megathread]


Good job everyone blocking and boycotting .ml! It's having an effect, users are noticing and MAUs on their comms are falling!

And for anyone asking "Why are we boycotting/blocking lemmy.ml?" Here's a quick recap:

Lemmy.ml is an instance run by admins who are hardcore tankies and will enforce their ideology on their instance through various means from allowing (and pushing it themselves) propaganda (Such as Russia being justified in some way to invade Ukraine) and known propaganda outlets (Like RT) to removing content on their instance critical of their favored authoritarian regimes such as Russia or China and even banning users for such speech or speech critical of them if it's off their instance (Just like the Reddit mods of ol!).

If it was just some random instance it would have been defederated from long ago like the rest of the "Tankie Triad" (Hexbear and Lemmygrad), but they've positioned lemmy.ml as the "flagship" instance and abused that position and influence to become large enough to keep other instances from defederating from them.

Which I believe is harmful to the Lemmy-verse's overall growth and outside reputation. I have seen it come up before on Reddit threads (and other testimonials from people who came back and tried it again) that "They tried Lemmy but it was a bunch of tankies and went back to Reddit"

I don't know about you, but I'd prefer Lemmy to not end up with the reputation for being "Tankie Central " or even worse "Voat 2.0".

So if you haven't joined the boycott yet, join today and help us foster a better healthier Lemmy-verse!

You can take a look around here on !meanwhileongrad@sh.itjust.works for documentation of it or checkout this list of curated documentation

::: spoiler Evidence of bans, censorship and bias to push their "ideology":

lemmy.world/post/32298242

lemmy.world/post/32471440

lemmy.world/post/32720369

lemmy.world/post/32292143

lemmy.world/post/32222856

lemmy.world/post/32426343

lemmy.world/post/32058315

lemmy.world/post/32426884

lemmy.world/post/32191006

lemmy.world/post/32720652

lemmy.world/post/32676095

lemmy.world/post/32298242

lemmy.world/post/32292143

lemmy.world/post/32221990

lemmy.world/post/32222278

lemmy.world/post/32222991

lemmy.world/post/32223697

lemmy.world/post/32224698

lemmy.world/post/32425984

lemmy.world/post/31569892

lemmy.world/post/31368129

lemmy.world/post/31329952

lemmy.world/post/31596159

lemmy.world/post/30665418

lemmy.world/post/30876228

lemmy.world/post/31090903

lemmy.world/post/31329952

lemmy.world/post/31368129

lemmy.world/post/29490804

lemmy.world/post/29507466

lemmy.world/post/29878102

lemmy.world/post/29980157

lemm.ee/post/65494823

lemmy.world/post/28480760

lemmy.world/post/28481615

lemmy.world/post/28482147

lemmy.world/post/28480936

lemmy.world/post/28482273

lemmy.world/post/28481272

lemmy.world/post/28481064

lemmy.world/post/27674360

lemmy.world/post/27674117

lemmy.world/post/27673934

lemmy.world/post/27673724

lemmy.world/post/27577337

lemmy.world/post/27378634

lemmy.world/post/27346630

lemmy.world/post/27341283

lemmy.world/post/27288224

lemmy.world/post/27156418

lemmy.world/post/27054157

lemmy.world/post/27008261
:::

::: spoiler Allowing known propaganda outlets and permitting altered headlines:

lemmy.world/post/32323822

lemmy.world/post/32283425

lemmy.world/post/32289824

lemmy.world/post/32337368

lemmy.world/post/30843744

lemmy.world/post/28275465

lemmy.world/post/27428838

lemmy.world/post/27416097

lemmy.world/post/27314050

lemmy.world/post/27288953
:::

"NK is actually good, and anything counter to that is Western LIES" ~dessalines, .ml admin, head Lemmy dev lemmy.world/post/31595035

Spreading Russia talking points like the Ukraine invasion just being a "negotiating tactic" !https://lemmy.world/post/27012640

General negative sentiment to other instances who haven't "seen the way" yet: lemmy.world/post/27426510

Open declaration of support for Russia (direct from dessalines (head admin)) lemmy.world/post/27352415

"concentration camps were just reeducation camps and weren't that bad" lemmy.world/post/26985447

"Don't worry guys, the Uyghur Genocide was REALLY just birth control! ~dessalines, .ml admin, dev lemmy.world/post/30580167

"See! nobody died IN Tiananmen Square, just AROUND it, so it doesn't count!!" ~ Davel, .ml admin
lemmy.world/post/30673342

A .ml admins' (davel) response to a valid report of "NK is actually good" propaganda/misinfo lemmy.world/post/32627834

"The China censorship tool isnt actually censorship! And if it is, it's actually a good thing a state has that much power!" ~Tankies of .ml lemmy.world/post/30010789

Rooting for Russia in the Russia-Ukraine war lemmy.world/post/29274763

Nutomics continued transphobia lemmy.world/post/29222558

Update 6/1/2025 - adding additional links since original post

Update 6/14/2025 - adding additional links since last edit

Update 6/19/2025 - adding additional links since last edit

Update 6/30/2025 - adding additional links since last edit

Update 7/03/2025 - adding additional links since last edit/formatting changes

Update 7/09/2025 - adding additional links since last edit


Lemmy - A link aggregator for the fediverse

lemm.ee

This entry was edited (5 days ago)
⇧