Chromium adds Wayland color-management-v1 support, allowing HDR rendering on supported platforms with a default-enabled feature flag.Bobby Borisov (Linuxiac)
like this
This is the first release where RISC-V 64-bit is officially supported by Debian Linux albeit with limited board support and the Debian RISC-V build process is handicapped by slow hardware.
With the Debian 13.0 release planned for 9 August, one of the notable fundamental features with this Debian 'Trixie' release is now supporting RISC-V as an official CPU architecturewww.phoronix.com
like this
Biohybrid machine ushers new era of robotics, scientists say
I hate how capcut has gotten to. Ive tried davcihi resolve but i find it isint as easy as capcut. I want to try a open source video editor for my linux mint laptop that is really free and so easy even a child could learn it.
Im up for suggestions or a change of my mindset.
I you want open-source then your best choice is either Shotcut or Kdenlive.
Shotcut is one of the simplest editor I've ever used...but only if you have simple edits to do, the more you wanna do something less simple the worst it gets.
Kdenlive on the other hand is fine to use in most use cases, but can be a bit tricky to understand at first.
So I always suggest Shotctut if you're sure you won't do crazy edits, Kdenlive otherwise, or to just use both if you are unsure.
https://www.tiktok.com/t/ZTHgc5LsX58Ys-YysMi/ Why do people fear socialism, but not fascism? Why does the idea of workers owning the means of production scare millions, while police states, corpora...TankieTube
My first hurdle is understanding that i need to add a boot sequence and navigate to the EFI file in my mounted pen drive.
second hurdle is understanding i need to disable secure boot so that the dell bios doesnt think something is wrong and always run the bios repair program.
third is understanding that i need to disable Intel rapid storage for the full install (luckily linux mint tells us this)
and honestly the hardest thing was installing fastfetch cuz theres a lot of outdated information out there on how to install it on Mint.
the process took about 4 hours, i consider it very lucky that i was able to do it so fast.
resources that helped me:
devicetests.com/boot-usb-uefi-…
Learn the workaround to boot from USB in UEFI mode on Dell Inspiron laptops with our step-by-step guide. Get your device up and running in no time.Brent Cohen (DeviceTests)
like this
Hello, i have problem because i can't make it work for like a week.
I tried a lot of different configurations and every time i try refind with encryption when refind starts there is no menu entry for encryptred disk, but with no encryption everything works fine. I looked a lot on arch wiki, some install scripts on github and i do what they do and it doesn't work. Maybe anyone could help?
Script i actually use:
execute_refind() {
BLKID1=$(blkid -s UUID -o value $ROOT)
BLKID2=$(blkid -s UUID -o value $CRYPT)
refind-install --usedefault "$ESP" --alldrivers
touch /boot/refind_linux.conf
if [ "$ENCRYPTION" == "yes" ] && [ "$FILESYSTEM" == "btrfs" ]
then
cat >> /boot/refind_linux.conf << EOF
"Boot with minimal options" "rd.luks.name=$BLKID2=artix root=UUID=$BLKID2 rootfstype=$FILESYSTEM rw add_efi_memmap quiet $NVIDIA_MODESET"
EOF
fi
if [ "$ENCRYPTION" == "no" ] && [ "$FILESYSTEM" == "btrfs" ]
then
cat >> /boot/refind_linux.conf << EOF
"Boot with minimal options" "rootflags=subvol=/@ root=UUID=$BLKID1 rw add_efi_memmap rootfstype=$FILESYSTEM initrd=@\boot\booster-$KERNEL.img quiet $NVIDIA_MODESET"
EOF
fi
if [ "$ENCRYPTION" == "yes" ] && [ "$FILESYSTEM" != "btrfs" ]
then
cat >> /boot/refind_linux.conf << EOF
"Boot with minimal options" "rd.luks.name=$BLKID2=artix root=UUID=$BLKID2 rootfstype=$FILESYSTEM rw add_efi_memmap quiet $NVIDIA_MODESET"
EOF
fi
if [ "$ENCRYPTION" == "no" ] && [ "$FILESYSTEM" != "btrfs" ]
then
cat >> /boot/refind_linux.conf << EOF
"Boot with minimal options" "root=UUID=$BLKID1 rw add_efi_memmap rootfstype=$FILESYSTEM quiet $NVIDIA_MODESET"
EOF
fi
execute_modules
}like this
Linux users who have Secure Boot enabled on their systems knowingly or unknowingly rely on a ke [...]LWN.net
There is even a whole section in Wikipedia on issues and criticism with secure boot:
en.m.wikipedia.org/wiki/UEFI#S…
Some people argue that one can work around such locking down of PC hardware. Do this or that to avoid issues with substantial tinkering.
But that is not a bug but a feature. Sure, as a technical Linux user you can work around some nastiness. Like working around privacy invasion on Facebook or Linkedin by "adjusting" settings, or "adjust" settings in Wimdows to make it more private and so on. The thing is: working against the platform becomes quickly a losing game, because you don't control the platform - Microsoft does. And it does not help you if you manage to re-gain control of your device after some hours of tinkering if 99.9% of people around you don't have the knowledge and time and store your data, photos, Emails on OneDrive and so on. Freedom is very much a collective thing and software freedom is no exception.
And this does not mean that the thinkering and hacking is in vain - but it is not enough. We need the practical right to control our devices.
In west Texas, storm chaser Laura Rowe captured the picture of a lifetime last night (May 17, 2021), with this fantastic shot of a mature supercell thunderstorm, illuminated at varying heights from the setting sun. By Timothy Jordan
#potd #potd2025 #pictureoftheday #nature #photography #thunder #naturephotography #weather #thunderstorm #notMyImage #TimothyJordan
I was wondering, is there any reason why I should buy the Steam Deck abroad in France instead of in my home of Canada?
So I (Canadian) am surprising my friend (from France) with a Steam Deck in October when I go visit them. It will just be the cheaper LCD version, since they won’t care about (or notice) the difference in quality.
Aside from buying adapters for the plug, I literally can’t think of a reason why I should buy it directly in Europe as opposed to getting it in Canada. It would be a lot easier since I can have it delivered to my address, don’t need a specific day and time for it to be delivered, don’t have to deal with any issues of ordering things in a foreign country (sometimes you need to have a local address to order and have things delivered, etc)
That said, I wanted to still check and see if there’s something I’m forgetting or just outright unaware of. I know there’s specific power requirements for the Steam Deck, but mine worked just fine with an adapter when I was last there in January.
So you have to pay taxes if you bring your phone with you ? (Since it is probably more expensive than 430€)
That a doesn't seem to be how it goes.
Technically, yes. And you would be able to ask for those taxes back upon returning to your home country (with the same phone). But since this would create huge queues at the airports, nobody actually enforces that.
However, travelling with e.g. 2 Steam Decks or with one in its original packaging raises suspicion and you could get stopped when going through the green portal at the airport.
Also, no mention of iOS 26’s new call screening feature - which asks unknown callers for their name and purpose of the call and displays this on the screen before your phone starts to ring. And, again, it’s all happening on-device.
I'm no fan of Android, but it's had this capability for years. This feels like Apple inventing the rectangle again.
After years of innovation and community collaboration, we’re ending support for Clear Linux OS. Effective immediately, Intel will no longer provide security patches, updates, or maintenance for Clear Linux OS, and the Clear Linux OS GitHub repository…Clear Linux OS Forum
like this
like this
Welcome to a new issue of This Week in Plasma! Every week we cover the highlights of what’s happening in the world of KDE Plasma and its associated apps like Discover, System Monitor, and more.This Week in Plasma: rounded bottom corners
Yes! Tired of updating KDE at times and the plug-in 'rounded-corners' doesn't work because Kwin is slow to update.
My question, does this also work on gtk apps?
I guess it doesnt detect a nonventoy (used impression) usb with the iso written to it either? A bit confused I dont mind limine but It not being able to boot from a recovery usb is a bit of an issue
NVM it did end up working off impressions and not ventoy? I think it ended up detecting my ssd which also has ventoy installed in the boot manager too, the name wasnt there before, odd
Like limine itself has no option for it, but bios wasnt showing one for my ssd or usb either, now it is after restarting a few times
Trump could drag a 14 year old by her hair into central park in broad daylight and fuck her brains out, to a sold-out audience and claim it as fake without any repercussions.
This is all just a waste of time.
On the 16th of July, at around 8pm UTC+2, a malicious AUR package was
uploaded to the AUR. Two other malicious packages were uploaded by the
same user a few hours later. These packages were installing a script
coming from the same GitHub repository that was identified as a Remote
Access Trojan (RAT).The affected malicious packages are:
- librewolf-fix-bin
- firefox-patch-bin
- zen-browser-patched-bin
The Arch Linux team addressed the issue as soon as they became aware of
the situation. As of today, 18th of July, at around 6pm UTC+2, the
offending packages have been deleted from the AUR.We strongly encourage users that may have installed one of these
packages to remove them from their system and to take the necessary
measures in order to ensure they were not compromised.
There are more packages with this malware found.
minecraft-crackedttf-ms-fonts-allvesktop-bin-patchedttf-all-ms-fonts
If you installed any of these packages, check your running processes for one named systemd-initd (this is the RAT).
The suspicious packages have a patch from this now-inaccessible Codeberg repo:
codeberg.org/arch_lover3/brows…The Arch maintainers have been informed of all this already and are investigating.
like this
comm -1 -2 <(pacman -Q | awk '{print $1}' | sort) <(sort vulnerable_packages.txt)vulnerable_packages.txt containing one package name per line.
If you want to find a first-rate Minecraft launcher, we recommend downloading TLauncher – the best among its competitors!TLauncher
Coming about three weeks after DXVK 2.6.2, the DXVK 2.7 release adds support for the VK_EXT_descriptor_buffer Vulkan extension by default on newer AMD and NVIDIA GPUs to significantly reduce CPU overhead in games like Final Fantasy XIV, God of War, Metaphor: ReFantazio, Watch Dogs 2, and others.
DXVK 2.7 Vulkan-based implementation of D3D9, D3D10, and D3D11 for Linux / Wine is now available for download with various new features.Marius Nestor (9to5Linux)
Yet another open-source software company has turned its back on the principles that drive free software.Tom Parker (Reclaim the Net)
like this
Absolute nothingburger.
From F-Droid's statement (emphasis mine):
We respect Tusky’s decision to block mentioned website; it’s their right to introduce restrictions like these into their software. We also respect Fedilab’s decision not to hardcode a login block; instead they are actively working on making it easier to block certain domains in the app itself and thus giving users more power to moderate which content they’ll see. If people disagree with F-Droid’s decision not to flag Fedilab, a idea is to develop a decentralized tag system based on package IDs which allow third-party servers to share their own warnings with their community.
They're not blocking any fediverse apps that you can use to connect to any server.
Feel free to use any Lemmy or Mastodon client to connect to any hate-filled instances your hateful little heart desires. If you don't like that some apps have built-in blocklists, use different apps, or modify them. That's the beauty of open source.
Do what you want, just don't expect the rest of the world to amorally do it for you. This is perfectly in keeping with open-source philosophy.
like this
trixie (aka debian 13) is about to get released with plasma 6.3. it seems that finally x11 is being left behind, which is good, but it worried me a little bit because
x11 is still very well supported by plasma 6, but the near future has no place to it and i worry i would eventually get stuck without updates to my system as the newer versions lose x11 support. i decided to try wayland+nouveau again on trixie to see if i had better luck this time
it all worked way better than i expected. performance is seemingly on par with the proprietary driver, i've had no crashes so far and i've been using it for a week and even screensharing, one of the most problematic aspects of the experience last time i tried, worked well. the one problem i had was with the slack flatpak, which didn't support wayland for some reason, so it had to run on xwayland. screen sharing wayland applications from x11 apps is possible through the xwaylandvideobridge, which kinda works, but it crashed xwayland entirely at one point, killing both x11 applications i had running. i won't blame that on the system itself and installing the slack deb package fixed the problem anyway
all in all, it seems like i can safely switch to plasma 6+wayland+nouveau at work
like this
if i had an amd video card i would have moved to wayland ages ago. things on wayland are so much more polished than on x11
why does nvidia have to suck so much? i'm still salty about the eglstreams bullshit
Like the window thumbnails gnome extension? 
How accurate are the dates for upcoming releases typically?
I've got some great Linux swag from Ubuntu Korea, but I've been looking to buy new clothes lately and would love to rock more FOSS.
I see a couple websites that sell FOSS branded clothing, but does anyone have good experience buying high quality hats/tshirts/sweaters/active wear from any of these online retailers? Bonus points if the retailers donate proceeds to development
like this
There’s always cafepress. But none of the money goes to the places you’re wanting.
Looking for the ideal Linux Gifts? Come check out our giant selection of T-Shirts, Mugs, Tote Bags, Stickers and More. CafePress brings your passions to life with the perfect item for every occasion.CafePress
With 2 years of updates, full Vulkan support, and quality-of-life improvements, Blender 4.5 LTS is every Blenderhead’s best friend.blender.org
like this
LibreOffice 25.2.5 rolls out with over 60 bug fixes, addressing crashes and compatibility issues across Writer, Calc, Impress, and Base.Bobby Borisov (Linuxiac)
like this
Clickbaity title on the original article, but I think this is the most important point to consider from it:
After getting to 1% in approximately 2011, it took about a decade to double that to 2%. The jump from 2% to 3% took just over two years, and 3% to 4% took less than a year.Get the picture? The Linux desktop is growing, and it's growing fast.
It's not a typo. Linux's desktop share is growing, according to the US government's records.Steven Vaughan-Nichols (ZDNET)
like this
I am using a laptop, with a cheaper monitor that only has one hdmi input. I have two devices that I want to use on this monitor, My laptop and my xbox series, so I got an hdmi switcher.
The xbox handles switching to and from it's input without a hitch, but my laptop can takes up to a minute to recognize the switch and display to the monitor, sometimes not recognizing it at all.
I was thinking that having the laptop continue to output the display whether or not it recognizes the monitor as disconnected would help make switching between them more seamless. Is there a way to achieve this?
I am using KDE and I have the "Do Nothing" option selected under close lid in power options.
Add virtual monitors to your windows 10/11 device! Works with VR, OBS, Sunshine, and/or any desktop sharing software. - VirtualDrivers/Virtual-Display-DriverGitHub
debian 12.11, organic maps from flatpak.
My local organic maps started to download the whole world. Every single map it could find. I tried stopping it but the only way to achieve that is to turn the application off. On starting it again, it resumes downloading.
Why?
The android based version found on f-droid is easier to use. I wanted to use the desktop based one because I work from home more often than elsewhere.
like this
Are you positive it's all the maps or maybe just the world map overview?
Also sidenote, look at the fork of OrganicMaps called CoMaps
Are you positive it’s all the maps or maybe just the world map overview?
yes, I'm sure. It started downloading every.single.country.
look at the fork of OrganicMaps called CoMaps
what's the difference? because graphics and functions look exactly the same for both apps, except the project's icon. Am I missing something?
Unfortunately I don't know how yo help with your original question then.
CoMaps is a recent fork because Organic Maps shows signs of corporate takeover and going against the principals of FOSS
More details here
lwn.net/Articles/1024387/
The open-source mobile app Organic Maps is used by millions of people on both the Android and i [...]LWN.net
Linux has surpassed 5% desktop market share in the US (5.03% in June 2025), per StatCounter, driven by privacy concerns, rising costs of Windows/macOS, and user-friendly distros like Ubuntu.Ryan Gibson (WebProNews)
like this
Close Trump allies like Steve Bannon say "the president is pissed every time he looks at the BRICS dedollarization effort". The US fears the Global South challenge to the dollar's exorbitant privilegeBen Norton (Geopolitical Economy Report)
I have never been so lucky in my entire life
#photography#Alberta#landscape #rt #potd #potd2025 #pictureoftheday #nature #thunder #lightning #naturephotography #weather #thunderstorm #notMyImage #cloudsphotography
qr code is the squares code that, if used with a qr code scanner redirects me automatically to a website or to download a pkpass file, right?
after downloading said pkpass file to my android, any wallet application like fosswallet should recognize it and add it to the local library (on my android device), right?
what other formats do transportation authorities use?
To those residing in Germany, is pkpass use widespread there? What are common formats used there?
cross-posted from: lemmy.ml/post/33289366
obligatory I know this is not a linux question, but you provide good information and alternativesqr code is the squares code that, if used with a qr code scanner redirects me automatically to a website or to download a pkpass file, right?
after downloading said pkpass file to my android, any wallet application like fosswallet should recognize it and add it to the local library (on my android device), right?
what other formats do transportation authorities use?
To those residing in Germany, is pkpass use widespread there? What are common formats used there?
are qr codes and pkpass files the same? what other formats do transportation authorities use?
qr code is the squares code that, if used with a qr code scanner redirects me automatically to a website or to download a pkpass file, right?after downloading said pkpass file to my android, any wallet application like fosswallet should recognize it and add it to the local library (on my android device), right?
what other formats do transportation authorities use?
To those residing in Germany, is pkpass use widespread there? What are common formats used there?
They are not at all the same thing.
A QR code is just a 2D barcode that can be used to hold a certain amount of alphanumeric data (and amount is limited by size).
While pkpass is an Apple format used in its wallet app to store data.
Aren't all barcodes 2D?
EDIT No wait, they're basically 1D aren't they? Nevermind!
Exactly. No matter the y dimension. Barcode data is only stored in x. Whereas QR uses x and y for data.
They also use the corner squares and a few specific dots to allow scanning from greater angles. Basically allowing the data to be read in 3d space. Even though only 2d is used to store that data.
This is why QR can work well with cameras. Whereas bar codes are designed for very short range laser reflection.
PS lots of info on QR online including open source programs to make your own.
The same goes for bar codes. But readers involve some very simple maker skills. Making simple barcode readers was a common school science project in the early 90s.
Your generic "barcode" for something like a UPC is considered a 1D barcode and uses things like the spacing of the lines and thickness to encode data. Although some 1D barcodes can detect the barcode is damaged they cannot do error recovery.
Your 2D barcodes, like QR or Data Matrix, store data in both directions and depending on format can have varying levels of error correction (duplicate data) built into the barcode. They also obviously can take up less room and hold the same or more data as well. You do need a scanner that can do 2D barcodes though, as not all scanners will read them.
Canonical announced today that they teamed up with ESWIN Computing to ship Ubuntu Linux as the preferred operating system on their ESWIN Computing EBC77 Series single board computerwww.phoronix.com
cross-posted from: lemmy.ml/post/33275115
According to my statistics that I look at, my second largest group are those who are on some Linux distribution (it just shows up as "Linux" there for me). Why did I write this? Because this group of people indirectly start their system through something called initramfs. Let's take a look at what it is and how to use it to our advantage.Use the translator in the sidebar to translate the page.
This isn’t the first time I’ve blogged about the dearth of truly great PC laptops out there, and I suspect it won’t be the last.
This is a bit of a rant; feel free to skip it if you’re here for the KDE content. This isn’t the first time I’ve blogged about the dearth of truly great PC laptops out there, and …Adventures in Linux and KDE
like this
Well I say it's no wonder people gravitate towards it but I don't actually like it myself.
It sucks that they make it basically impossible to upgrade snything. And that there storage and RAM upgrades cost several times more than they should.
I have a Macbool air (not by choice) and I installed asahi linux a couple of weeks ago. Main take away is that it's really good except for software support. I've had a bit of trouble finding programs that work well on arm even open source projects often don't compile there programs to work on arm.
Here is a quick series of frequently asked questions about the X11 session kissing us goodbye. Shoutout to Nate from which I copied the format of the post. Is Xorg unmaintained and abandoned? No,...Jordan Petridis (Rust in Peace)
Is Wayland Gay?Yes and Xorg is Trans.
Picture of the libxtrans gitlab repository with a Trans flag as the project banner.
Happy Pride month and Free Palestine ✊
Very nice
Hello there! Here's the thing: I got some old HDD for my Debian home server, and now that I have plenty of disk space I want to keep a backup of the OS, so that if something accidentally breaks (either SW or HW) I can quickly fix it.
now the question is: which directory should I include and which should I exclude from the backup? I use docker a lot, is there any docker-specific directory that I should back up?
like this
It is a question I've spent a lot of time trying to work out. Can't speak to docker.
Some of the specifics of Keeps and Dontkeeps depend on details of your system. You have to find out where the distro, DM and other apps keep the following:
Dontkeeps:
- trashes
- temp files
- file indexes .. IMHO these dont backup properly if you leave them in and will prevent you from completing the task
- device files
Keeps:
- list of installed packages --- explicit and deps separate if possible
- config files: /etc, ~/.config, ~/.* on a case by case basis... I say remove the obvious large temp dirs and keep the rest by default for simplicity
- for the system configs I've had a tool called etckeeper running for a while because it was highly recommended but I've never actually restored from it...
- personal documents and other files such as typically kept in the home directory
- /root occasionally has something you need
Ways to investigate:
- use a disk usage utility to find out where your storage is being used up ... It'll help you find large Dontkeeps
- watch for recently modified files
- dirs and files that are modified all the time are usually temp dirs. But sometimes they have something useful like your firefox profile.
Most backup solutions are ONE of the following:
Don't spend too much time crying about needing two solutions. Just make your backup today and reach perfection later.
Remember: sync isn't backup. Test your backup if you can (but its not as easy as it sounds). Off site your most precious files.
I think most options have been covered here, but I'd like to consider some other bits...
User accounts & file permissions:- if you have >1 account, note that the UserID is internally numbered (starting from 1000, so Bob=1000, Sue=1001) and your file system is probably setup using the numerical UserID... so re-creating the users in a different order would give Sue access to Bob's files and vice versa.
Similarly, backing up /etc /var etc... you should check if any applications (ie databases) need specific chmod and chown settings
Rsync, tar, etc can cover some of this, you just need to check you rebuild users in the correct order.
Maybe Ansible is another approach? So your disaster recovery would be:
1. Install plain OS on new drive
2. Get Ansible access to it (ie basic netwroking)
3. Rebuild OS and instsll applicstions automatically with Ansible
4. Restore application & home folders (again with Ansible)
When you get this working, it's amazing to watch an entire system being rebuilt
I now reside in Germany and my current employer pays 50% of this so called Deutschland-Job-Ticket. There is no physical card but travel information you download to an android wallet, but apparently google wallet is the only available option. See the picture:
Google is a company I don’t trust with my data, neither do I expect your regular public transportation authority employee to care about his privacy (he looked at me as I was asking if 2 + 2 equal 4). I am not aware of non google based wallets where I can download the travel information.
I tried some f-droid and droidify options but it turns out they’re pure crap.
The site: abo.ride-ticketing.de/app/ I log in with my username and password, get my travel information and on the bottom the picture I uploaded.
Any workarounds?
This being Germany, shouldn’t there be an alternative to those who refuse google? Don’t I have that right as a consumer?
Another question: I screenshot my logged in session on the link I provided where you see my qr code and my billing data. The public transportation employee told me that’s not allowed (wtf?). Can anyone here provide a rationale?
cross-posted from: lemmy.ml/post/33213275
I know android is minimally related to linux and the question doesn't resemble a typical question for a linux forum but each time I've asked here you've provided valuable information:I now reside in Germany and my current employer pays 50% of this so called Deutschland-Job-Ticket. There is no physical card but travel information you download to an android wallet, but apparently google wallet is the only available option. See the picture:
Google is a company I don’t trust with my data, neither do I expect your regular public transportation authority employee to care about his privacy (he looked at me as I was asking if 2 + 2 equal 4). I am not aware of non google based wallets where I can download the travel information.
I tried some f-droid and droidify options but it turns out they’re pure crap.
The site: abo.ride-ticketing.de/app/ I log in with my username and password, get my travel information and on the bottom the picture I uploaded.
Any workarounds?
This being Germany, shouldn’t there be an alternative to those who refuse google? Don’t I have that right as a consumer?
Another question: I screenshot my logged in session on the link I provided where you see my qr code and my billing data. The public transportation employee told me that’s not allowed (wtf?). Can anyone here provide a rationale?
I'm using fWallet for Eurostar, plane tickets, etc anything with PkPass. Very minimalist, just does the job.
A beautiful cross-platform wallet application for your transport tickets, discouf-droid.org
By Mera Aladam
Published date: 14 July 2025 11:50 BST | Last update:~08:00 EDT
According to the UN agency for #Palestinian refugees (UNRWA), "truckloads of food and medical supplies are waiting in warehouses" outside #Gaza."Stop the starvation. Lift the siege. Let the #UN, including #UNRWA, do its lifesaving work," they said in a post on X.
Israeli forces killed more than 130 Palestinians in Gaza in a single day, including several children who were attempting to collect water for their hungry families in the besieged enclave.Mera Aladam (Middle East Eye)
cross-posted from: lemmy.ml/post/33173703
By Mera Aladam
Published date: 14 July 2025 11:50 BST | Last update:~08:00 EDT
According to the UN agency for #Palestinian refugees (UNRWA), "truckloads of food and medical supplies are waiting in warehouses" outside #Gaza."Stop the starvation. Lift the siege. Let the #UN, including #UNRWA, do its lifesaving work," they said in a post on X.
Israeli forces killed more than 130 Palestinians in Gaza in a single day, including several children who were attempting to collect water for their hungry families in the besieged enclave.Mera Aladam (Middle East Eye)
reshared this
Jeremy Scahill
Jul 14, 2025
Immediately after Trump announced what he called the “final proposal” for a Gaza deal, Prime Minister Benjamin Netanyahu undermined the negotiating process, repeatedly announcing—in public—his intent to continue the war after securing the release of ten living Israeli captives in a temporary 60-day truce and to forge ahead with his ethnic cleansing campaign to force the surviving Palestinians out of Gaza. “After the pause, we will transfer the population in the Strip southward and impose a siege [on the rest of Gaza],” Netanyahu told far-right cabinet minister Bezalel Smotrich recently, according to Israel’s Channel 12.
Trump again claimed a Gaza deal may be imminent as Netanyahu continues his campaign of sabotage.www.dropsitenews.com
cross-posted from: lemmy.ml/post/33162300
Jeremy Scahill
Jul 14, 2025Immediately after Trump announced what he called the “final proposal” for a Gaza deal, Prime Minister Benjamin Netanyahu undermined the negotiating process, repeatedly announcing—in public—his intent to continue the war after securing the release of ten living Israeli captives in a temporary 60-day truce and to forge ahead with his ethnic cleansing campaign to force the surviving Palestinians out of Gaza. “After the pause, we will transfer the population in the Strip southward and impose a siege [on the rest of Gaza],” Netanyahu told far-right cabinet minister Bezalel Smotrich recently, according to Israel’s Channel 12.
Trump again claimed a Gaza deal may be imminent as Netanyahu continues his campaign of sabotage.www.dropsitenews.com
I realized my VLC was broke some point in the week after updating Arch. I spend time troubleshooting then find a forum post with replies from an Arch moderator saying they knew it would happen and it's my fault for not wanting to read through pages of changelogs. Another mod post says they won't announce that on the RSS feed either. I thought I was doing good by following the RSS but I guess that's not enough.
I've been happily using Arch for 5 years but after reading those posts I've decided to look for a different distro. Does anyone have recommendations for the closest I can get to Arch but with a different attitude around updating?
like this
IMHO the actual problem here is the Arch moderator being an ass.
This happens in all operating systems from time to time. An update kills an app. Usually, the app is wildly out of date and hanging on to the last vestiges of a deprecated call that finally gets removed. I recently experienced this with V4L (for OBS virtual camera) and a kernel update in NixOS. Had one hell of a time tracking it down. It was one of the twice-yearly OS upgrades. Luckily, I had only updated one of my devices, and it still worked on the old one. After tearing apart the changes, I was finally able to specify V4L and a Linux kernel version. Immediately, the problem popped right out. The new kernel now needs a specific value passed for the expected video stream, where it used to use a default if it wasn't specified.
Apple breaks apps all the time. Windows does, but less so. The difference is usually before an update happens, Windows and Apple have had TONs of people testing on their own teams and their insiders people.
In the end, I just needed to roll back the kernel one revision until the V4L guys make the change, or I needed to recompile V4L myself with the option defaulted to something useful.
I don't think you can safely get away from this kind of issue. (app incompatibility on upgrade, not mods being an ass)
Debian or Mint seem to be pretty welcoming and easy going to get rid of the asshole issues, but chances are, you're going to break something eventually, and it's going to be super hard to figure out why and how to get around it.
Off-topic: A meta-analysis if you will, but I'm just astonished by the engagement this post has received. I wonder what this tells us about the Linux community on Lemmy.
On-topic: OP, honestly, others have chimed in and left very good answers already. So perhaps you won't find anything within my comment that hasn't been said. But, as I'm a latecomer to this thread, I might have an advantage that some didn't (try to capitalize on). To be blunt, the original post didn't reveal much about what you liked and didn't like about Arch. As such, my initial impression would have been to suggest Gentoo. But, you've since provided the engaging community crucial insights that help us in grasping the full picture. Below you may find my own notes on your distro preferences based on what you said:
- care-free updates
- repo packages receive updates shortly after upstream
- rewards effort put into initial setup
Furthermore, I'll take the liberty to assume that (native) package availability is expected to be vast. And that you wish for the process of updating to be snappy.
Based on the above, I recommend NixOS.
If jumping ship to NixOS seems too daunting, then consider installing Nix^[To be clear, I meant the package manager. Determinate System's installer is probably your best option.] on Arch. Consider to slowly but surely expand its usage within your system. And, then, when you're comfortable, embrace NixOS as a worthy successor to your Arch installation.
Bringing Nix to the enterprise to empower fearless software deliverydeterminate.systems
the x264 av1 file plays only audio on vlc but works with flaws on mpv: on mpv I get audio and video, but every 5 to 6 seconds it's like instead of getting 24 fps I get 22, the user noticing the missing frames.
Is this a hardware issue? software?
debian 12.11, vlc 3.0.21 flatpak, mpv 0.40.0 flatpak
what do I do?
Check using e.g. top for your CPU (nvidia-smi or amd-smi for your GPU) or System Monitor on KDE if any of your resource is being maxed out. If so then most likely you found the culprit.
Regarding what the actual codec is being used you can use ffprobe but anyway what matters if resource bottleneck and thus if you can have hardware acceleration for it.
It's probably worth investigating so that you don't keep on getting video files too big for your computer to handle. I imagine it's something very high resolution with very recent compression. If so, look for something less demanding, e.g. x265 720p and if that's still leading to performance hiccups the older x264 720p or even 480p.
It's rate that the media player itself, e.g. VLC or mpv, actually is the bottleneck.
Hi, I recently finished setting up my Asustor NAS, and I found the snapshotting setup in it a bit confusing, so I'm writing this as a quick reference that might be hopefully useful to others.
For context, my device is a AS1102TL, and it's running ADM 4.3.3, but I imagine it should apply to all recent Asustor devices.
First of all, the reason I picked Asustor instead of e.g. Synology... it's because it was not clear if the latter actually supported LUKS full disk encryption on an external usb hd. In Asustor you have to ssh into your NAS, but you can definitely do it.
The only gotcha: If you created the LUKS volume recently on another system, it's likely that it'll be using Argon2 for key stretching. A memory-intensive algorithm, for which the 1GB of memory provided by my AS1102TL is not enough. The solution is simply to add another key with a different algo, e.g. PBKDF2, or just create the volume on your Asustor. Either way, you're going to be able to read and write it both from the NAS and another Linux on your pc.
$ sudo $(which cryptsetup) luksOpen /dev/sdb1 encrypted # "encrypted" is just the name that I gave to the device, pick anything... remember the `-S` flag if you need to select a key in a different slot
$ sudo mount /dev/mapper/encrypted /mnt/USB1
... do what you want ...
$ sudo umount /mnt/USB1/
$ sudo $(which cryptsetup) luksClose encryptedNormally, mounted external drives are available on paths like /share/USB0, /share/USB1. Maybe it could be possible to mount (or symlink your mount point for) your disk there, to make it usable to ADM, but by default /share is an immutable loop mount of /volume0/.@system/sharebase.loop
$ lsattr -d /share/
-----i------- /share/btrfs send functionality, so it's not very interesting for our purposes anyhow).Now, you have two different approaches to accomplish incremental backups of btrfs snapshots, one where you just create them yourself from the CLI, and one where you can try to reuse the snapshots created in ADM.
sudo btrfs subvolume snapshot -r /volume1 /volume1/.@snapshots/v20250710-0951sudo btrfs send -p /volume1/.@snapshots/v20250710-0936 /volume1/.@snapshots/v20250710-0951/ | sudo btrfs receive -v /mnt/USB1/I recommend the -v verbose flag for btrfs receive, otherwise you're not going to see progress while the operation is ongoing.
That's it! Of course, the first send will have to happen without specifying a parent with -p, to do a full clone.
There are two problems with this: the snapshots created by ADM are not read-only and they are mounted right under the toplevel.
To address these issues:
sudo mount /dev/md1 -o subvol=/ /mnt/rootvol
sudo btrfs property set /mnt/rootvol/v2025079-2324/ ro truesudo btrfs send -p /mnt/rootvol/v2025079-0824/ /mnt/rootvol/v2025079-2324 | sudo btrfs receive -v /mnt/USB1/-p and -v flags as needed. That's it!If you're wondering why did we have to mount the / subvol, you can try without:
You can mount the snapshots directly in ADM's Snapshot Center, by toggling the Preview toggle for a snapshot. In that case, they are still going to be RW, though mounted as RO. You can deal with that by remounting: sudo mount -o remount,rw /volume1/.@snapshots/v2025079-2324/ && sudo btrfs property set /volume1/.@snapshots/v2025079-2324/ ro true,
You can then try to send the changes, but what you're going to get is:
$ sudo btrfs send -p /volume1/.@snapshots/v2025079-0824/ /volume1/.@snapshots/v2025079-2324
ERROR: not on mount point: /volume1/.@snapshots/v2025079-2324btrfs subvolume list.$ sudo btrfs subvolume list /volume1 -qua
ID 256 gen 159842 top level 5 parent_uuid - uuid cbc37b20-901f-b043-8cf1-59b814814140 path <FS_TREE>/base
ID 258 gen 151914 top level 5 parent_uuid - uuid 5039c206-1a89-dc45-a9fe-43f8959cb672 path <FS_TREE>/.iscsi
ID 259 gen 159840 top level 5 parent_uuid - uuid 06d46207-9aa2-2944-ba38-e5736963ec12 path <FS_TREE>/.@plugins
ID 2758 gen 157876 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 256c36c5-7033-a945-a2db-b6a334a8419f path <FS_TREE>/v2025079-0824
ID 2759 gen 157859 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 88942ee6-8b52-3d4d-b972-5de2d6764728 path <FS_TREE>/v2025079-2324
ID 2762 gen 159833 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 6d636914-35a0-3f42-9486-bf5d673b94c5 path base/.@snapshots/v20250710-0936
ID 2763 gen 159836 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid e99df217-4946-a740-bba9-99f64f1a0d69 path base/.@snapshots/v20250710-0951$ sudo btrfs subvolume list /mnt/rootvol/ -qua
ID 256 gen 159867 top level 5 parent_uuid - uuid cbc37b20-901f-b043-8cf1-59b814814140 path base
ID 258 gen 151914 top level 5 parent_uuid - uuid 5039c206-1a89-dc45-a9fe-43f8959cb672 path .iscsi
ID 259 gen 159840 top level 5 parent_uuid - uuid 06d46207-9aa2-2944-ba38-e5736963ec12 path .@plugins
ID 2758 gen 157876 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 256c36c5-7033-a945-a2db-b6a334a8419f path v2025079-0824
ID 2759 gen 157859 top level 5 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 88942ee6-8b52-3d4d-b972-5de2d6764728 path v2025079-2324
ID 2762 gen 159833 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid 6d636914-35a0-3f42-9486-bf5d673b94c5 path <FS_TREE>/base/.@snapshots/v20250710-0936
ID 2763 gen 159836 top level 256 parent_uuid cbc37b20-901f-b043-8cf1-59b814814140 uuid e99df217-4946-a740-bba9-99f64f1a0d69 path <FS_TREE>/base/.@snapshots/v20250710-0951top level 5 and if you list them under /volume1 (which is just the mount point for the /base subvolume), they are not found directly underneath (despite them being mounted there), which is why you see them being under their own <FS_TREE>.Conversely, the ones that you can create directly from the cli under volume1, appear as top level 256 and they are under /base if you list the subvolumes under /mnt/rootvol.
I hope this has been useful.
PS, while I was closing the dozens of tabs that I opened to investigate how everything fits together, a note on what I wrote earlier:
this doesn’t mean that once mounted, the disk will be integrated in the ADM ui (you’re not going to be able to see it in the “External Devices” ui, nor be able to select it as a destination in the “Backup & Restore” ui).
mounting the disk on a path already accessible by ADM file explorer doesn't work because of permission issues, similar to the immutable flag that you can see with lsattr... but someone on Reddit had another workaround:
reddit.com/r/asustor/comments/…
I mounted the opened device to another path already accessible by ADM file explorer. I don't think it will matter where really. But in my case I made two partitions on an external USB drive. The first partition is a small exFat formatted (10GB). The second partition takes up the rest of the drive and is formatted with cryptsetup (LUKS). Finally, to use this I open the LUKS device and mount it to a location in the first partition (which is automatically mounted by ADM)
The Linux community seems like it's filled with so much drama! How do we make sense of it all? Is Fedora going to kill my games? Did you hear the latest thing Linus said? Is GNOME really blocking a...AbnormalBeingsTube
like this
So sitrep:
Newish desktop
- i7-13700K
- 64Gb DDR5 6000Mhz
- RTX 3070Ti
- MSI PRO Z790-P
(WiFi is not a factor, permanent ethernet connection.)
Needs:
- Gaming
- Music composing
- Coding (Mostly python)
- Video editing
I've been using Linux on and off throughout the years, but lately I've fallen out of the loop somewhat. Started with Slackware around 1998, Kubuntu in the 2000's, Ubuntu 2010's, Kali and Mandrake 2020's -> on my laptop, Ubuntu server on my RasPi. At work, we have a few Fedora servers I have to maintain. So not a complete novice, but somewhat obsolete info.
I have been looking at the immutable distros, like Bazzite and Pop!_OS as I've done the whole song and dance of constantly repairing my distro because of various issues, and I'd like my main recreational machine & distro to be low maintenance, I get to fix linux servers at work enough already, I don't want to bring that home.
With gaming, I've understood that linux has come a loooooong way since I last tried sometime around TBC Launch for WoW when Wine barely worked with it.
Music composing is a little annoying, since apparently both Ableton and FL studio are not an option. I've heard good things about Reaper, but I'll have to do some more research. Feel free to educate me on this topic if you have some insider info. I don't play live sets, just compose and mix.
Video editing, currently I use Davinci Resolve, and apparently it works fine on Linux, just some limitations and shenanigans with codecs. Alternatives are welcome, I don't need 90% of what resolve offers, I can make do with a simpler software as well.
Thank you kindly in advance for departing thine wisdom.
EDIT: Ended up installing Bazzite, and KVM virtualizing OpenSuse Tumbleweed and vanilla Fedora, keeping my backups for now on the NAS so I will be able to easily nuke & go with Tumbleweed (I think) next, since so many people seem to swear by it. Thank you everyone for the great advice!
Jujutsu is essentially an alternative front-end or "porcelain" to git, both magnificiently simplified and powerful.
I tried it after using Emacs Magit for about six or seven years, and jujutsu is really easier to use than git and useful if one wants a tidy public history of changes (with "tidy" and "public" as Linus Torvalds recommends). Plus it is fully compatible to git as backend - other contributors will not even note you are using it.
like this
Another useful property is that while jujutsu does have worktrees, like git, in many cases where one would use git worktrees (for example when writing accompanying documentation ) it is just easier to use another line of changes (what is a branch in git).
Alas, that jujutsu does not store local change sets automatically on a remote git repo (this happens only when you update and push a git branch), means that still-mutable local changes are not automatically transferred to another computer you work on. And unpublished changes are naturally mutable in jujutsu. But you can safely copy a jj repo via rsync, as changes in jj metadata are thread-safe and atomic. The other way is of course to push a work-in-progress ("WIP") git branch which can mutate and is therefore not allowed to be merged by other people.
That’s not really how one would use worktrees in git. Worktrees are useful in the case when e.g. you are working on version 0.15 of your software that has many breaking changes to version 0.14 (perhaps even on a build system level) and you need to release a 0.14.1 patch. Worktrees separate directories which means you don’t need to stash or do a wip commit, nor clear you 0.15 build artefacts. Just cd to a different worktree, checkout the 0.14 branch, create and checkout the 0.14.1 branch, clear build artifacts in a different directory from your main development one, and start working.
When done, just cd back and keep working again without switching branches, clearing artifacts, or doing full rebuilds of the in-development 0.15 version.
Plus, git does not store change sets or branches or anything on any remote unless you push them either, so if you’re having that problem just stop pushing things you don’t want to push. You can totally rsync a git repo, just ensure it’s at rest. Otherwise do what you should be doing anyway: set the repo on another machine as a remote of the other repo, so you can git pull my_private_machine feature/my_private_branch without needing to push to a central repo.
I’m sure jujutsu has many advantages, but it also reads to me like you’re misunderstanding the git model. Which can be a fair critique of git to be fair, but then we would need to talk about what about the git model people have trouble with, why, and how to address those issues, and so far I haven’t seen any kind of research in that direction from jujutsu (not that I’ve been looking particularly hard)
One difference between using worktrees and branches in git is that in git you usually have uncommited stuff that's not finished, and worktrees are a way to avoid committing this. And you want to avoid committing early because it is hard to clean-up later. This hesistsnce to commit is not necessary at all in jujutsu - any change to the source files is already captured and will be restored once you go back to that changeset. There are other cases where you use worktrees in git e.g. to isolate a build and an hour-long integration test running it in parallel to your ongoing work, and in thar cases, you'd use workspaces in jujutsu like you'd in git.
but then we would need to talk about what about the git model people have trouble with, why
Too many commands that do subtly and irreversivly things on the repo, with potentially messed-up interim states, only to do the conceptually much simpler task to edit and manipulate the directed acyclic graph of commits.
In short, jujutsu is a commit graph editor and does the same with perhaps 10% of the complexity of git. The man pages on the git reset, branch and merge commands are already larger than the whole - and detailed!- documentation of jujutsu.
Steve Klabnik explains this much better than I can here in his blog that I posted.
It is simply not my experience that cleaning up commits after committing early is difficult in git. Amending a commit is a single -a flag away from the git commit command. The opposite problem is when you do too much work and want to split it into multiple commit rather than a huge one, in which case git add -p is again a single flag away from git add.
In general, git’s entire model is to allow you to work first, and do administrative tasks (including tidying up your commit history etc) later.
And almost nothing is truly destructive in git, the vast majority of cases can be fixed by judicious use of git reflog.
The only cases I’ve ran into where git repos became corrupted were caused by external tools, mainly GUIs that label buttons with git commands that do something different when clicked (like the button labeled push actually doing git push —all for no good reason, and such things) with users that have no idea how git works that have been trained just by telling them “click this to save your work, click this to get the last version of the code”
Sickday likes this.
Technically true - but it looks like jj does a lot of history re-writing which would require a lot of care to be taken when working on a shared codebase.
The page on remotes has some cautions in it.
We need the --allow-backwards flag to set the trunk branch to the previous commit because it is a dangerous operation: if we had pushed trunk, things would get weird when we try and push now. We've kept it all local, so there's no issues with doing this.
jj by default refuses to change any commits on published branches such as a master branch that has been pushed. The details are configurable.
BTW that's why I linked Linus Torvalds mail on when and why to rewrite history - it is good advice.
Hrm... It looks interesting but it seems too dedicated to crafting "the perfect commit".
Changing our description changed the commit ID! This is why we have both IDs: the change ID has not changed, but the commit ID has. This allows us to evolve our commit over time, but still have a stable way to refer to all versions of it.
I don't want to "evolve a commit" - I want to capture my changes over time. If I decide later that I want to prepare the commit for merging I will.
I hate it because it's different - but even trying to give it a "benefit of the doubt" I really can't see this as better. It's not like it's difficult to create a "tidy" commit with git as is.
And as far as "easier to use goes"... well... Here's how you get a list of anonymous branches
jj log -r 'heads(all())'jj new pzoqtwuv yykpmnuq -m "merge better documentation"
# vs.
git merge my_branch_Namejj undo looks neat (and also crazy dangerous unless you can undo an undo?).
And since they eschew branches with names you get to memorize hash strings instead of branch names that describe the thing you were doing?
No trouble, you can still name branches if you want. And no, you don't have to type the whole changeset hash, the first one to three letters are usually sufficient.
Also, branch names are not a permanent thing, they disappear after you merged them.
If you want, to can put an empty commit with the description of what you want to do at the top of your changes, and then use "jj split" to move changes to different commits before it.
There are several common work flows which are explained in Klabnik's blog post.
Yeah you can undo undo and also resurrect undone states.
If the readability of the commit history really does not matter to you - for exsmple, nobody needs to read this code again - it's possible that jj does not give you enough advantage. Everyone works different.
If the readability of the commit history really does not matter to you - for exsmple, nobody needs to read this code again - it’s possible that jj does not give you enough advantage. Everyone works different.
I mean... It does and I will use git to manage commit histories as necessary. I don't see jj as solving that problem or even making it easier. Doing a single squash-commit or a rebase -i when I merge a branch is relatively trivial.
And from what I can tell it's much easier to do a git pull upstream master than to do jj new skdfsld dskfjas since you'll likely have to lookup those hashes? I mean I wouldn't remember them.
And from what I can tell it's much easier to do agit pull upstream masterthan to dojj new skdfsld dskfjassince you'll likely have to lookup those hashes? I mean I wouldn't remember them.
One takes them from the last commit log and uses the first few letters. Steve Klabnik shows how they are used in practice. It makes no sense to repeat it here.
One takes them from the last commit log and uses the first few letters
So - it's not the length of the random garbage that is the issue it's the fact that it's random garbage that I have no chance of remembering after 5 seconds and switching between branches. All my branches are instead random hashes that I'll need to lookup or remember.
I've read through the blog. It sounds like they've taken the minor inconvenience of doing a git merge --squash and distributed that pain across every-single-commit you're ever going to make instead. All to get "tidy commits" which were possible before anyway.
I was actually rather interested in the idea of jj being something that made history-rewriting easier (e.g. for removing bad commits with passwords and the like). But the fact that it almost completely throws out the entire concept of working on named branches (yes you can have them - but "One interesting thing about branches in jj that's different than branches in git is that branches do not automatically move." - genius) is just ridiculous. And to claim that it's now simpler just seems like gaslighting.
I'm looking for a music player on Pop!_OS that supports playlists, repeating a single track while still being able to swap tracks in the playlist, and also supports fading between songs and when stopping playback. And ideas on what to try?
So far I've tried VLC, Audacious, and Rhythmbox, but none of those seem to support all of those requirements. (Rhythmbox was close but the repeat one from the toolbar plugin doesn't work.)
Edit: Got it working in Rhythmbox after toggling the repeat options a few more times. Still curious if there are other options out there though.
like this
Even with all those incentive dollars, tax breaks, and innumerable concessions this will always be what happens. Governments are captured by corporate money, power and influence and then governments give away the people's wealth and corporations take.
Despite claims that layoffs target mostly mid-level managers.Anton Shilov (Tom's Hardware)
The ‘H/W Quick Erase’ function, which fries the flash memory, should probably have a more forbidding name.
How many of you knew about this project?
Info
Plasma Bigscreen is a Plasma-based shell (desktop environment) for TVs and other large displays. It is designed to be used with arrow navigation using remotes or controllers.
Links
I have been a long time Plasma Mobile contributor, but I have always had a keen interest in having Linux on my TV! I have noticed that in the past few months, the Plasma Bigscreen project has had some interest from people wanting to contribute, but t…espi.dev
carzian likes this.
it means being free from all the liberal elites and fake news media who just want to control us and take away our freedom and tell me what to think and how to live my life and whats safe to eat
theyre not part of the establishment and theyre not trying to control me okay trump is a rebel and a fighter and jesus is the ultimate rebel and free thinker he went against the establishment and challenged the powers that be like his dad and stuff
i believe in being free and independent and not being controlled by anyone or anything that isnt on my side like for example the mcdonalds corporation what do you think
As a kid: Saturday morning cartoons.
As a teen: Where in the World is Carmen Sandiego the animated series (which was once interrupted by the news to show a plane crashing into a building).
As an adult: I ain't got time for that shit!
Same with getting a place to live. It was quite a shock when I learned you had to fucking interview to rent an apartment, and may not be approved even if you have the money.
Wait what? I've never heard of such a thing in any of the places I've lived. BS like needing 3x the rent or 1st, 2nd and last months rent + deposit yea
But needing to interview‽ That's a new one LMAO
The Handala, operated by the Freedom Flotilla Coalition, left the port of Syracuse shortly after 12:00 pm local time, according to a journalist of the French press agency AFP, carrying about fifteen activists.Several dozen people, some holding Palestinian flags and others wearing keffiyeh scarves, gathered at the port to cheer the boat's departure with cries of "Free Palestine".
The former Norwegian trawler, loaded with medical supplies, food, children's equipment and medicine, will sail for about a week in the Mediterranean, covering roughly 1,800 kilometres, in the hope of reaching Gaza's coast.
Palestinians inspect the wreckage of a gas station destroyed in an Israeli airstrike in Deir al-Balah, central Gaza Strip, Saturday, July 12, 2025.
A Gaza-bound boat carrying pro-Palestinian activists, including members of France's hard-left LFI party, and humanitarian aid left Sicily on Sunday, over a month after Israel detained and deported people aboard a previous vessel.RFI
The Handala, operated by the Freedom Flotilla Coalition, left the port of Syracuse shortly after 12:00 pm local time, according to a journalist of the French press agency AFP, carrying about fifteen activists.Several dozen people, some holding Palestinian flags and others wearing keffiyeh scarves, gathered at the port to cheer the boat's departure with cries of "Free Palestine".
The former Norwegian trawler, loaded with medical supplies, food, children's equipment and medicine, will sail for about a week in the Mediterranean, covering roughly 1,800 kilometres, in the hope of reaching Gaza's coast.
Palestinians inspect the wreckage of a gas station destroyed in an Israeli airstrike in Deir al-Balah, central Gaza Strip, Saturday, July 12, 2025.
A Gaza-bound boat carrying pro-Palestinian activists, including members of France's hard-left LFI party, and humanitarian aid left Sicily on Sunday, over a month after Israel detained and deported people aboard a previous vessel.RFI
"Investors would likely interpret such an event as a direct affront to Fed independence, putting the central bank under extreme institutional duress."Simon Kennedy (Fortune)
I'd be interested in hearing recommendations, and also what to avoid!
The Consumer Product Safety Commission has received three reports of customers being hit in face by bottle lidsGustaf Kilander (The Independent)
The US economy is expected to slow the rest of the year as tariffs take a bigger toll on consumers and businesses, immigration constraints intensifyPaul Davidson (USA TODAY)
Several people were hurt in a second night of anti-migrant unrest in the town of Torre Pacheco in south-east Spain after a pensioner was beaten up, authorities said.Despite a major police presence, groups armed with batons roamed the streets looking for people with foreign origins, the regional newspaper La Opinión de Murcia reported.
The regional government did not say how many people were injured but stated that at least one person had been arrested over the violence.
The unrest erupted after a 68-year-old man told Spanish media he was beaten up in the street on Wednesday by three young people of north African origin. The attack was filmed and put on social media.
Authorities say at least one person arrested after disorder broke out in Torre Pacheco over attack on pensionerGuardian staff reporter (The Guardian)
The French president, Emmanuel Macron, has called on the EU to “defend European interests resolutely” after Donald Trump threatened to impose 30% tariffs on nearly all imports from the EU.It came as the EU moved to de-escalate tensions after the blunt move by Trump on Saturday. The bloc declared a further pause on €21bn of retaliatory tariffs until 1 August, dovetailing with the US president’s new deal deadline.
At the same time, the European Commission president, Ursula von der Leyen, and the Indonesian president, Prabowo Subianto, announced a “political agreement” on a free trade deal on Sunday, ending nine years of negotiations.
French president says bloc should be ready for trade war after 30% tariff threat but other EU leaders call for calmLisa O'Carroll (The Guardian)
A familiar breed of British pundit has resurfaced - loud, self-declared feminists whose outrage is as selective as it is performative, and whose moral compass somehow always aligns with western state power.They remain silent as Gaza burns, but are quick to find their voice to cheer on Israel and its allies as they threaten to flatten Iran - civilian casualties be damned.
During Israel's recent strikes on Iran, the radical feminist journalist and co‑founder of Justice for Women, Julie Bindel, branded leftist anti-war feminists "Team Iran" sympathisers. It was a disingenuous, grotesquely misleading and dangerously ideological accusation, but not a surprising one.
While women in Gaza bleed in silence, these pundits reserve their fury for pro-Palestine protesters - smearing them as extremists, branding solidarity as terrorism, twisting every act of dissent into an endorsement of "jihad" and weaponising antisemitism to crush critique.
The UK's most prominent 'feminists' ignore women in Gaza under bombs and siege, but speak up to manufacture consent for western wars or attack the anti-war leftMiddle East Eye
It's time for another 68k Mac repair. I thought it would be a quick and easy fix, but this turned out to be a but more mysterious.-- Info
Microbug:
DM (dump memory)
SM (set memory)
Video page:
U15D VIA 6522 PA6 Pin 8 to U4G 74AS253 Pin 4
From microbug, I was writing to
3F A700 Screen Buffer 1
00 0000 - 3F FFFF 0M - 4MB Total address space
00 0000 - 0F FFFF 0M - 1MB
00 0000 - 07 FFFF 0K - 512k
xx FCFF Screen1 memory end
xx A700 Screen1 Memory start
xx 7C7F Screen2 Memory End
xx 2700 Screen2 Memory Start
It's time for another 68k Mac repair. I thought it would be a quick and easy fix, but this turned out to be a but more mysterious. -- InfoMicrobug:DM (dump m...YouTube
Refined copper represents the biggest category of the metal that is imported by the US.MINING.COM
By Fayha Shalash in Ramallah, occupied Palestine
Published date: 12 July 2025 15:49 BST"The attack began when a large group of settlers targeted dozens of #Palestinians attempting to access their land between the villages of Sinjil and al-Mazra'a al-Sharqiya, east of Ramallah.
Such assaults have become a regular occurrence, taking place almost every Friday, as part of efforts to intimidate villagers and drive them off land targeted for settlement."
"'Musalat owned a home in the area and died trying to defend it' - Abdul Samad Abdul Aziz, al-Mazra'a al-Sharqiya municipality member"
Israeli settlers beat a Palestinian-American man to death and fatally shot another during a coordinated assault on villagers in the occupied West Bank on Friday.Fayha Shalash (Middle East Eye)
By Fayha Shalash in Ramallah, occupied Palestine
Published date: 12 July 2025 15:49 BST"The attack began when a large group of settlers targeted dozens of #Palestinians attempting to access their land between the villages of Sinjil and al-Mazra'a al-Sharqiya, east of Ramallah.
Such assaults have become a regular occurrence, taking place almost every Friday, as part of efforts to intimidate villagers and drive them off land targeted for settlement."
"'Musalat owned a home in the area and died trying to defend it' - Abdul Samad Abdul Aziz, al-Mazra'a al-Sharqiya municipality member"
Israeli settlers beat a Palestinian-American man to death and fatally shot another during a coordinated assault on villagers in the occupied West Bank on Friday.Fayha Shalash (Middle East Eye)
More than 100,000 could lose insurance coverage and more than 3,000 could lose jobs.Caroline Lewis (Gothamist)
A law that mandates Narcan training for jail guards will also go into effect.Samir Ferdowsi (Gothamist)
ChunkMcHorkle likes this.
Researchers found that psilocin—the compound your body makes after ingesting psilocybin—helped human cells live longer.Ashley Fike (VICE)
Cross-post from !balconygardening@slrpnk.net
Okay, just from the pictures, let me say what I think is happening:
1) You're growing too many different kinds of plants in a small space.
2) You're growing Cannabis, which draws literally every sweet-sensing pest.
3) Those things on the underside of the leaves you posted are Ladybug larvae, and they are GOOD.
You clear this up in about a week with a few simple things:
1) Get a clutch of ladybugs from your local nursery or plant stores. This should be available almost everywhere in the US.
2) Although I don't want to advocate for this because I love local pollinators, get a pheromone trap for the stinging insects. They cost about $10, and don't lure honeybees, but WILL kill local carpenter bees and yellow jackets.
3) For the aphids, get a soap-based spray, or make it yourself. It's pretty much just dish soap and water, but there are guides online. Spray EVERY MORNING AND AFTER SUNSET. This plus the ladybug clutch will make quick work of the aphids.
4) I see you have Basil in containers, move that AWAY from the plants that are infested with scale or aphids.
5) Depending on where you live, your nursery's may sell Mantids. Get them. They are beneficial, but ruthless in eating and killing anything in their grasp, including wasps.
6) If you have wasps around, there is a nest nearby. Inspect your building awnings, trees, or under anything shaded and find that nest. It's not two doors over, it's within 100ft of where you got stung. Find it, set a pheromone trap around your plants (not where you think the nest is), then after a lot of them are dead, go find and remove the nests next.
Don't leave standing water around, and make sure that you stay on schedule with the soap spray. Most of this will be cleared in just a week.
Edit: also for the slugs and stuff, you're growing a lot of stuff in a mostly shaded area, so you're just asking for slugs. Line a general area around your plants with Diatomaceous Earth. It's cheap, easy to use, and doesn't harm anything that doesn't crawl. Also, organic.
Double edit: DO NOT spray this black bugs with the striped butts. Those will be ladybugs soon that eat all the aphids. They are good.
dgdft likes this.
You're growing Cannabis, which draws literally every sweet-sensing pest.
Funnily enough, my weed is pretty much the only thing (and chillis) that isn't much affected.
The willow is the worst one, and the pepino second.
Those things on the underside of the leaves you posted are Ladybug larvae, and they are GOOD.
Those larvae pictures are already a bit older, maybe two weeks?
They probably got killed by the ants or wasps, because I rarely see them around anymore.
I also rarely see any other aphid eating insects anymore, only ants and ants carrying carcasses 🙁
Okay, so why are you coming here with this dire plea, but not giving up to date information?
Makes me think you don't actually care and might be lazy....
dgdft doesn't like this.
maxprime
in reply to Karna • • •lilith267
in reply to maxprime • • •