Welcome to Friendica.Eskimo.Com

Home of Censorship Free Hosting

 Eskimo North Linux Shells, E-mail, Virtual Machines, Web Hosting.

E-mail, Web Hosting, Linux Shell Accounts terminal or full remote desktops.

Sign Up For A Free Trial Here

Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!

lemmy - Link to source

Mesa's NVIDIA Vulkan Driver "NVK" Now Exposes Vulkan 1.3 Support
This Vulkan 1.3 support for NVK is thus one of the many new features to find in the Mesa 24.1 release due out in Q2. This comes following all of the necessary extensions being wired up and NVK continuing to mature at a rather brisk pace.

Mesa's NVIDIA Vulkan Driver "NVK" Now Exposes Vulkan 1.3 Support

The NVK driver within Mesa for open-source NVIDIA GPU support for the Vulkan API that works with the Nouveau DRM kernel driver is now capable of advertising Vulkan 1.3 API support.
www.phoronix.com

lemmy - Link to source

"Must Try" distros and DEs?

Hey folks! I'm getting a fresh laptop for the first time in about a decade (Framework 16) in a couple of months and am looking forward to doing some low-level tinkering both on the OS and hardware. I'm planning to convert into a "cyberdeck" with quick-release hinges for the screen since I usually use an HMD, built-in breadboard, and other hardware hacking fun.

On the OS, I'm planning to try NixOS as a baremetal hypervisor (KVM/QEMU) and run my "primary" OSes in VMs with hardware passthrough. If perf is horrible, I'll probably switch back to baremetal after a bit. But, I'm not likely going to be gaming on it so, I'm not likely to have much issue.

Once the hypervisor is working in a manner that I like, I should have an easy time backing up, rolling back, swapping out my "desktop" OS. I've been using Linux as my pretty much my only OS for over a decade (I use MacOS as a glorified SSH client for work). Most of my time has been on distros in the Debian or RHEL families (*buntu, Linux Mint, Crunchbang, CentOS, etc) and I pretty much live in the terminal these days.

With all of this said, I am coming to you folks for help. I would like you folks to share distros, desktop environments, window managers that you think I should give a try, or would like to inflict on me and what makes them noteworthy.

I can't guarantee that I'll get through suggestions, as my ADHD has been playing up lately, but I'll give it an attempt. Seriously. If you want me to try Hannah Montana Linux, I'll do it and report back on the experience.

EDIT: Thank you all for your fantastic suggestions. I'm going to start compiling them into a list this weekend.

This entry was edited (1 year ago)

lemmy - Link to source

Linux in the corporate space

I made this post because I am really curious if Linux is used in offices and educational centres like schools.

While we all know Windows is the mac-daddy in the business space, are there any businesses you know or workplaces that actually Linux as a business replacement for Windows?

I.e. Mint or Ubuntu, I am not strictly talking about the server side of things.

in reply to Tekkip20

lemmy - Link to source

TCB13

Linux in corporation fails in multiple ways, the most prevalent is that people need to collaborate with others that use proprietary software such as MS Office that isn't available for Linux and the alternatives such as LibreOffice aren't just good enough. It all comes down to ROI, the cost of Windows/Office for a company is cheaper than the cost of dealing with the inconsistencies in format conversions, people who don't know how to use the alternative X etc etc. This issue is so common that companies usually also avoid Apple due to the same reason, while on macOS you've a LOT more professional software it is still very painful to deal with the small inconsistencies and whatnot.

Linux desktop is great, I love it, but it gets it even worse than Apple, here some use cases that aren't easy to deal in Linux:

  • People who need the real MS Office because once you have to collaborate with others Open/Libre/OnlyOffice won’t cut it;
  • Designers who use Adobe apps that won’t run properly without having a dedicated GPU, passthrough and a some hacky way to get the image back into your main system that will cause noticeable delays. Who wants to deploy GPU passthroughs for others? Makes no sense;
  • People that run old software / games because not even those will run properly on Wine;
  • Electrical engineers: Circuit Design Suite (Multisim and Ultiboard) are primarily designed for Windows. Alternatives such as KiCad and EasyEDA may work in some cases but they aren’t great if you’ve to collaborate with others who use Circuit Design Suite;
  • Labs that require data acquisition from specialized hardware because companies making that hardware won’t make drivers and software for Linux;
  • Architects: AutoCAD isn’t available (not even the limited web version works) and Libre/FreeCAD don’t cut it if you’ve to collaborate with AutoCAD users;
  • Developers and sysadmins, because not everyone is using Docker and Github actions to deploy applications to some proprietary cloud solution. Finding a properly working FTP/SFTP/FTPS desktop client (similar WinSCP or Cyberduck) is an impossible task as the ones that exist fail even at basic tasks like dragging and dropping a file.

If one lives in a bubble and doesn’t to collaborate with others then native Linux apps might work and might even deliver a decent workflow. Once collaboration with Windows/Mac users is required then it’s game over – the “alternatives” aren’t just up to it.

Windows licenses are cheap and things work out of the box. Software runs fine, all vendors support whatever you’re trying to do and you’re productive from day zero. Sure, there are annoyances from time to time, but they’re way fewer and simpler to deal with than the hoops you’ve to go through to get a minimal and viable/productive Linux desktop experience. It all comes down to a question of how much time (days? months?) you want to spend fixing things on Linux that simply work out of the box under Windows for a minimal fee. Buy a Windows license and spend the time you would’ve spent dealing with Linux issues doing your actual job and you’ll, most likely, get a better ROI.

From a more market / macro perspective here are some extra reasons:

  • Companies like blame someone when things go wrong, if they chose open-source there's isn't someone to sue then;
  • Buying proprietary stuff means you're outsourcing the risks of such product;
  • Corruption pushes for proprietary: they might be buying software that is made by someone that is close to the CTO, CEO or other decision marker in the company, an old friend, family or straight under the table corruption;
  • Most non-tech companies use services from consulting companies in order to get their software developed / running. Consulting companies often fall under the last point that besides that they have have large incentives from companies like Microsoft to push their proprietary services. For eg. Microsoft will easily provide all of a consulting companies employees with free Azure services, Office and other discounts if they enter in an exclusivity agreement to sell their tech stack. To make things worse consulting companies live of cheap developers (like interns) and Microsoft and their platform makes things easier for anyone to code and deploy;
  • Microsoft provider a cohesive ecosystem of products that integrate really well with each other and usually don't require much effort to get things going - open-source however, usually requires custom development and a ton of work to work out the "sharp angles" between multiple solutions that aren't related and might not be easily compatible with each other;
  • Open-source requires a level of expertise that more than half of the developers and IT professionals simply don't have. This aspect reinforces the last point even more. Senior open-source experts are more expensive than simply buying proprietary solutions;
    • If we consider the price of a senior open-source expert + software costs (usually free) the cost of open-source is considerable lower than the cost of cheap developers + proprietary solutions, however consider we are talking about companies. Companies will always prefer to hire more less expensive and less proficient people because that means they're easier to replace and you'll pay less taxes;


  • Companies will prefer to hire services from other companies instead of employees thus making proprietary vendors more compelling. This happens because from an accounting / investors perspective employees are bad and subscriptions are cool (less taxes, no responsibilities etc);
  • The companies who build proprietary solutions work really hard to get vendors to sell their software, they provide commissions, support and the promises that if anything goes wrong they'll be there. This increases the number of proprietary-only vendors which reinforces everything above. If you're starting to sell software or networking services there's little incentive for you to go pure "open-source". With less companies, less visibility, less professionals (and more expensive), less margins and less positive market image, less customers and lesser profits.

Unfortunately things are really poised and rigged against open-source solutions and anyone who tries to push for them. The "experts" who work in consulting companies are part of this as they usually don't even know how to do things without the property solutions. Let me give you an example, once I had to work with E&Y, one of those big consulting companies, and I realized some awkward things while having conversations with both low level employees and partners / middle management, they weren't aware that there are alternatives most of the time. A manager of a digital transformation and cloud solutions team that started his career E&Y, wasn't aware that there was open-source alternatives to Google Workplace and Microsoft 365 for e-mail. I probed a TON around that and the guy, a software engineer with an university degree, didn't even know that was Postfix was and the history of email.

This entry was edited (1 year ago)

lemmy - Link to source

New Linux user here. Is this really how I'm supposed to install apps on Linux?

mullvad.net/en/help/install-mu…

Trying to install VPN and these are the instructions Mullvad is giving me. This is ridiculous. There must be a more simple way. I know how to follow the instructions but I have no idea what I'm doing here. Can't I just download a file and install it? I'm on Ubuntu.


Install Mullvad app on Linux

How to install and uninstall the Mullvad VPN app on Linux.
Mullvad VPN

lemmy - Link to source

Does Wayland really break everything? (Nate Graham's OG post ref'd in the Phoronix article)

Does Wayland really break everything?

I’ve written some other posts on Wayland recently, and it’s time for another one! Feel free to skip it it you aren’t interested in a discussion of Wayland and platforms. Many may …
Adventures in Linux and KDE

lemmy - Link to source

Why do you use the terminal?

Hi, everybody
Recently, a guy noticed that I was using it and asked why?
For me it because in Linux many things are done through the terminal because Linux has many different desktop environments

He also compared terminal commands with cheat codes in GTA and other games, he understands what benefits you take from them, but not from terminal commands

wordpress - Link to source

HackBerryPi CM5 is an open source, Raspberry Pi-powered handheld PC with a BlackBerry keyboard


The HackBerryPiCM5 is a handheld computer with a 4 inch, 720 x 720 pixel touchscreen display, a repurposed BlackBerry keyboard, and and a Raspberry Pi Compute Module 5 inside, allowing you to use the device as a portable Linux computer.

It’s the latest line of open source, Raspberry Pi + BlackBerry handhelds from ZitaoTech. While this model is not yet available for purchase from Elecrow or […]

#hackberryPiCm5 #hackberrypi #hackberrypicm5 #handheldComputer #raspberryPi

Read more: liliputing.com/hackberrypi-cm5…

HackBerryPi CM5 is an open source, Raspberry Pi-powered handheld PC with a BlackBerry keyboard - Liliputing

Brad Linder (Liliputing)

lemmy - Link to source

My experience with Linux Day 5 and beyond: Conclusion

Sensitive content

This entry was edited (1 year ago)

lemmy - Link to source

State of the Nvidia open source driver in late 2023?

Hi all,

I'm in the market for a new big desktop replacement gaming laptop, and looking at the market there are almost exclusively Nvidia powered.

I was wondering about the state of their new open-source driver. Can I run a plain vanilla kernel with only open source / upstream packages and drivers and expect to get a good experience? How is battery life, performance? Does DRI Prime and Vulkan based GPU selection "just work"?

The only alternative new for my market is a device with an Intel Arc A730M, which I currently think is going to be the one I end up buying.

Edit 19/11: Thanks for all the feedback everyone! Since the reactions were quite mixed - "it works perfectly for me" vs "it's a unmaintainable mess that breaks all the time", I'm going to err on the side of caution and look elsewhere. I found a used laptop with an AMD Radeon RX 6700M, which I'm going to check out the coming days. If not, I've also found Alienware sells their m16 laptop with an RX 7600M XT, which might be a good buy for me (I currently still rock an Alienware 17R1 from 2013 with an MXM card from a decomissioned industrial computer in it).

This entry was edited (1 year ago)

lemmy - Link to source

A response to the "Boycott Wayland" article

Link to article: gist.github.com/probonopd/9feb…

This OUTDATED article gets posted all the time. The full story is the guy is a massive FreeBSD fan so he is trying to convince more people to keep on using Xorg because he wants to make sure it isn't abandoned. Reason for that being that Wayland is built with Linux in mind and would not work under FreeBSD without a lot of effort bwing put in as it uses some Linux-specific components or libraries.

Let's go through the article point by point:

Wayland is broken by design:


  • A crash in the window manager takes down all running applications: Yes, because the compositor IS the server, window manager AND compositor at the same time.
  • You cannot do a lot of things: What, like allowing Windows to see your keystrokes, which makes developing a keylogger absolutely trivial?
  • There is not /usr/bin/wayland: Yes, because Wayland is a set of protocols, which a bunch of projects can implement as few or as many of, as they see fit, thus avoiding the issue of "unmaintainable mess" that has plagued Xorg for years.
  • It offloads work to the window manager: Again, yes, that's a part of its structure: do the protocols, then let the compositor implement them. That way, you have multiple implementations running simultaneously that are well integrated with their window managers and thus more efficient and performant. It also means that when a compositor suffers from too much cruft, we can just make a new one, while application developers wouldn't really have anything to change because if their application works on Wayland, then it works on different compositors (unless it is made specifically for GNOME, or specifically for wlroots, like wlr-randr)

....so what works on DE 1, doesn't necessarily work on DE 2: True, because oftentimes, it doesn't need to. Not implementing features can lead to a more lean and streamlined software solution. However, sometimes features are necessary and only implemented in some compositors. This usually happens because the universal solution is not ready. KDE are often known to do this with Plasma and KWin.

  • Wayland breaks screen recording applications: Correction: The following screen recording applications were not built to support Wayland (because Wayland is new to them or they just decided not to, or they were either too busy or too irresponsible enough to realise Wayland is coming, and has been for over 10 years. In defence of the devs, they probably wanted to make sure Wayland will become stable enough, but it has been the default even on Debian for many years now, so....

In terms of the applications, I'm not aware of many of them, and for this sort of application, I'm sire alot of work is required to change the graphical backend, so I understood that some smaller projects gave up, but OBS has been working on Wayland for quite a while. Is it perfect? I don't think so, but back when Brodie Robertson was using Hyprland, he was recording his videos using OBS. This article is quite outdated.

  • Wayland breaks screen sharing applications:

As the update shows, Jitsi now does work on Wayland.

Zoom only seemed to work on gnome, BUT if you open up the Link to the zoom issue and read through the comments, there is clearly a person that clearly states that they changed /etc/os-release from PureOS to debian and it worked for them, all because of some pointless limitations enforced by the Zoom developers. As the person posting the issue states "Currently, the zoom application has put an arbirtrary restriction on screensharing so it ONLY works on GNOME, when the api being used works on all wayland desktops." Read that again. It's a pointless restriction put there by the Zoom team because they couldn't be bothered to test anything non-GNOME.

And the last issue is a problem with the article writer's own appimage. I don't know about that one.

  • Wayland breaks automation software

As stated IN YOUR FACE, it is an application that works on X11 only. Yes, Wayland is not made to use such applications, but it doesn't mean they can't exist. Every heard of ydotool (remember that name)? Now you have.

Next up, we have 3 issues about GNOME and KDE global menus (1 for GNOME, 2 for KDE). From the little I know about global menus and using these projects, as well as considering that they are both incredibly stable on Wayland and Fedora KDE will be dropping Xorg completely, I think it's safe to assume these issues have probably been fixed. Please correct me if I'm wrong.

  • Wayland breaks AppImages that don't ship a special QT plugin: Great! Just ship the plugins then! Problem solved! Also, quote from the article: "However, there is a workaround: "AppImages which ship just the XCB plugin will automatically fallback to running in xwayland mode" (see below)."
  • Wayland breaks Redshift: Once again, a program built for Xorg doesn't always work on Wayland. Especially if it works with the compositor, like a colour temperature control application, or a wallpaper setter. The article quotes that "Redshift does not support Wayland since it offers no way to adjust the color temperature" which is not true, as proven by Redshift alternatives like Gammastep.
  • Wayland breaks global hotkeys: I present to you: Hyprland (where you can get global hotkeys). Now, it is normally not allowed by design, as a security measure, but Hyprland has not allowed that to stop them from implementing a solution where you can choose keys that will be passed on to the application. Boom, problem solved. Unfortunately, it doesn't seem to be implemented anywhere else, as far as I know.
  • Wayland does not work for XFCE: Come back to me in late 2024 after XFCE 4.20, which will introduce Wayland support, has been released. Also, wiki.xfce.org/releng/wayland_r…
  • Wayland does not work properly on Nvidia Hardware: It keeps on getting closer but is not there yet, or so I've heard. Apparently, the issue is with the proprietary drivers, as noveau works well. But I use AMD, so I'm only working off rumours and opinions here.
  • Wayland does not work properly on Intel hardware: Again, I'm using AMD, so I can't confirm or deny this, but considering the Intel drivers are open source, and I've heard about many, many improvements made on the Intel side of things, I think it would be reasonable to assume it has been fixed.

Edit: As multiple Intel users have pointed out in the comments, there seem to be no issues on Wayland with Intel hardware.

  • Wayland prevents GUI applications from running as root: This one has been crossed out as the article writer admits there is a solution
  • Wayland is biased towards Linux and breaks BSD: Arguments seem valid, and I'm guessing, are correct. This one is likely true and will remain so for the foreseeable future.

Edit: And yet, it seems that there are Wayland compositors for FreeBSD, so the above might only be true for OpenBSD and others.

  • Wayland complicates server side decorations: From what I've heard, this is true, mainly something to do with some GNOME agenda, as the article states. I think that one is true.
  • Wayland breaks windows raising/activating themselves: The linked issue is closed and seems to be resolved. There is a mention of a WIP protocol at the time (2019) that woukd fix this. I had difficulty following the discussion, but I think this has been fixed.
  • Wayland breaks RescueTime: Because RescueTime depends on X11-only tools like xprop.
  • Wayland breaks window manager: What you're describing is Wayland breaking X11-only tools for doing various tasks in a window manager. They are X11 tools, so of course they don't work on Wayland. I'm not sure if there are alternatives, but I'd guess there probably are. I know for a fact that Xrandr has alternatives like wlr-randr and kanshi for wlroots.
  • Wayland requires {instert WM here} to implement Xorg-like functionality:Yes, it does.

Quote from article: "As it currently stands minor WMs and DEs do not even intend to support Wayland given the sheer complexity of writing all the code required to support the above features. "

DEs: GNOME, KDE, MATE, XFCE, Cinnamon, Budgie, Enlightenment, and recently even Pantheon have either announced to start work on, have started work on, or already support Wayland.

Window managers: Qtile is doing it. Xmonad wants to hire a dev to do it. Dwm has a spiritual successor called dwl. i3 has a drop-in replacement called sway. Openbox has 2 spiritual successors called labwc and waybox. Now you might notice one of the biggest WMs is missing on here: AwesomeWM, which is such a shame. The Awesome devs have said they would be okay with someone taking on that challenge (which has already been attempted, as evidenced by the existence of way-cooler), but it seems that they wouldn't do it themselves.

As for the projects mentioned in the article, (JWM, TWM, XDM, IceWM) they are too small and obscure, and will likely fade away with Xorg.

  • Wayland breaks _NET_WM_STATE_SKIP_TASKBAR protocol I don't know about that one, ao I'll assume it is still the case. Edit: Ignoring the fact that the link is broken, it basically just links to a docs change where skipTaskbar is marked as unsupported on Linux. Link: github.com/electron/electron/p…
  • Wayland breaks NoMachine NX The link points to a page that has this marked as "SOLVED, Released in version 8" so I'm guessing it has been solved.
  • Wayland breaks Xclip: As you said it yourself, Xclip is an X11 application, so it doesn't work on Wayland. Of course it wouldn't work on Wayland. With Wayland, we're trying to prevent what happened with Xorg from happening again, or am I wrong?

Edit: As pointed out by some people in the comments, there are also alternatives to xclip like wl-clipboard.

  • Wayland breaks SUDO_ASKPASS: That link seems to point to the way this issue has been resolved so I don't see your point.
  • Wayland breaks X11 atoms: I lack knowledge on the topic so will assume this to be a valid argument
  • Wayland break games: I'm 99% sure you can disable Vsync??? But I'm not a gamer. Also, WINE on Wayland is getting better and better. Soon enough, I hope the subpar performance will become better performance (when compared to Xorg)
  • Wayland breaks xdotool: Well, yes. There is ydotool, but you're looking for a 1-to-1 replacement and I'm not sure if ydotool fits the bill for that.
  • Wayland breaks xkill: Well, yes. Again. It is an X application, so of course it does. Though for some reason I remember it working once on wayland. Must have been an xwayland app, or maybe I'm just misremembering this.
  • Wayland breaks screensavers: Yeah, that seems to be the case.
  • Wayland breaks setting the window position: That is a WIP for Plasma, not sure about any other projects, so assume true for anything else.
  • Wayland breaks color management: Not anymore. That is being actively worked on.
  • Wayland breaks DRM leasing: While not rhat familiar with the issue, my understanding of the topic is the article is correct: not all compositors support it.
  • Wayland breaks in-home streaming: Not familiar with this, so will assume true.
  • Wayland breaks NetWM/EWMH: Yeah, that seems to be the case.
  • Wayland breaks window icons: Yeah, that seems to be the case, as said in the article, when no .desktop files are used.

And that concludes my response to this article based on my fairly limited knowledge on the topic. If I got anything wrong, please, please let me know. As you can see my knowledge is quite limited, and as such, any corrections (preferably backed up with evidence) would be appreciated


Think twice about Wayland. It breaks everything!

Think twice about Wayland. It breaks everything! GitHub Gist: instantly share code, notes, and snippets.
Gist
This entry was edited (1 year ago)

lemmy - Link to source

My experience with Linux Day 2

Sensitive content

This entry was edited (1 year ago)
in reply to ☂️-

lemmy - Link to source

Phanlix

There's infinity between should and does sometimes.

So it was already ext4.

I ended up manually running the steam console as described here. Still wasn't able to use the gui to add a drive but I was able to use the console command to do it manually. Then I restarted to make sure everything was working. On starting steam again it was gone! So I full exited steam and opened console again, and somehow it was there! So I set the option under settings to start on boot thinking that it'd run the console edition again on boot and I could live with that.

Well it turns out somehow there are now 2 steam installs on my computer. I'm not gonna touch it since it's working, but my working theory is somehow running the console created a second steam on my pc. It did act like it was doing a full install the first time I booted on command line. Weird. But like I said it's working now. I may poke at it later and see if I can uninstall the redundant one, but I kinda don't wanna poke it.


Can't add new external hdd as a library · Issue #9666 · ValveSoftware/steam-for-linux

Your system information Steam Version: 1687015240(Latest Beta) Steam Client Build Date: Sat, Jun 17 10:53 AM UTC -05:00 Steam Web Build Date: Fri, Jun 16 8:51 PM UTC -05:00 Steam API Version: Steam...
GitHub
This entry was edited (1 year ago)

lemmy - Link to source

PipeWire 1.0 RC released (Final release expected end 2023)

PipeWire 0.3.81 (2023-10-06)
This is the first 1.0 release candidate that is API and ABI compatible
with previous 0.3.x releases.

Highlights

  • jackdbus support is now enabled by default.
  • IRQ based scheduling in ALSA was improved and enabled by default for
    Pro-Audio profile. It will also link the pcms together to get lower
    latency. This now matches what JACK does and results in equal latency
    for Pro-Audio profiles.
  • Support both old and new versions of webrtc-audio-processing to make
    the transition easier.
  • Forced quantum changes by nodes or metadata will now also force a
    suspend and resume of the graph, like the rate changes to make sure all
    nodes adapt to the new quantum. This is important for Pro-Audio nodes
    that need to reconfigure the hardware to a new period in IRQ based
    scheduling.
  • Fix a regression in regex parsing.
  • Many bugfixes and improvements.

PipeWire

  • Jackdbus is by default enabled now. The idea is that when jackdbus is
    installed, the real libjack.so is in the path and we can become a
    real JACK client.
  • Forces quantum changes by nodes or metadata will now also force a
    suspend and resume in the graph, like the rate changes to make sure all
    nodes adapt to the new quantum. This is important for Pro-Audio nodes
    that need to reconfigure the hardware to a new period.
  • The stream now has an EARLY_PROCESS option that can be used to implement custom buffer fill levels. (#3480)
  • Fix a regression in regex parsing. (#3528)
  • Fix a bug in position reporting in the driver node. (#3189) (#3544)
  • Destroying a link will now recalculate the graph correctly.
  • Fix the rate comparison for finding the best rate in the graph.
  • Use malloc_trim() when available to release memory. (#1840)

Tools

  • pw-cat now supports DFF DSD files.
  • pw-cli avoid some NULL derefs in some cases.

Modules

  • The RAOP sink has seen some cleanups and improvements. It will now ask
    for feedback every 2 seconds to keep some devices alive.
  • A bug in filter-chain was fixed where it would fail to apply the gain
    when mixing just one source.
  • The filter-chain can now pass the stream volume to a control in the
    filter-chain graph. (#3434)
  • Improve volume handling in RAOP sink.

Pulse-server

  • Some cleanup in the pending_stream handling.
  • Fix a regression in the event emission code where it failed to emit
    a changed event when a node was linked. (#3522)
  • Lower the realtime priority of pulseaudio clients.
  • Set pulse.module.id on the echo-cancel streams. (#3541)

SPA

  • Support both old and new versions of webrtc-audio-processing to make
    the transition easier.
  • The ALSA driver now does the sync of all followers directly from the
    wakeup event. This results in more stable rate matching.
  • IRQ based scheduling in ALSA was improved and enabled by default for
    Pro-Audio profile. It will also link the pcms together to get lower
    latency. This now matches what JACK does and gives equal latency for
    Pro-Audio profiles.
  • GNU/Hurd support was added.
  • Some improvements to passthrough handling.

Bluetooth

  • Improvements to the codec handling when PipeWire is used as Audio
    Gateway.
  • Adapt to new Bluez API for BAP devices.

JACK

  • When the jack library is set in the default library path, avoid using
    LD_LIBRARY_PATH because this can cause confusion.
  • Handle clearing the latency on a port.
  • jack_property now always manages to actually change the metadata because it waits for a roundtrip before exiting.

0.3.81 · PipeWire / pipewire · GitLab

PipeWire 0.3.81 (2023-10-06) This is the first 1.0 release candidate that is API and ABI compatible with previous 0.3.x releases.
GitLab

lemmy - Link to source

Wayland heading for default as Mint devs add to Cinnamon 6 • The Register
TLDR: XFCE and Cinnamon devs are ~~begging~~ beginning to work on Wayland support.

Wayland heading for default status as Mint devs mix it into Cinnamon 6 bun

Plus Linux Mint 22 to be based on Ubuntu 'Noble Numbat'
Liam Proven (The Register)
This entry was edited (1 year ago)
in reply to tetris11

lemmy - Link to source

0xd34d

Probably because it still uses the android camera API to do so rather than directly access /dev/video0.

github.com/termux/termux-api/b…

I'm sure it is possible to add a video capture to the API 😉


termux-api/app/src/main/java/com/termux/api/apis/CameraPhotoAPI.java at master · termux/termux-api

Termux add-on app which exposes device functionality as API to command line programs. - termux/termux-api
GitHub

lemmy - Link to source

Nobara 42 bootloader install issues?

The full error for anyone having issues with the screenshot is:
Installation Failed
Bootloader installation error
The bootloader could not be installed. The installationc ommand
grub2-install -target=i386-pc -recheck -force /dev/nvme0n1
returned error code 1.

Context:
I've had a hell of a rough time trying to install linux on my system, I've tried Pop, 2 versions of Ubuntu, Mint, and now I'm trying Nobara, and it's the first one that failed to install (I've mostly had video driver issues with the others.) My current disk situation is kind of a mess, I have 4 in the system:
1. ~15 year old OCZ SATA 128GB SSD (windows/boot)
2. ~10 year old WD SATA 512GB SSD (windows libraries like pictures, documents, downloads, etc)
3. ~6 month old Samsung 990 EVO 2TB M.2 NVMe SSD (games installed from windows)
4. ~5 year old BPXPro 1TB M.2 NVMe SSD (previous Ubuntu install that I had other issues with)

#1 is my boot drive and has the bootloader on it (when I want to boot ubuntu I hit F11 and select the second entry for that drive in the menu.) Previous distro installs have had no problem installing right over top of that and disk #4, but for whatever reason Nobara has failed to install the boot loader and I have no idea how to even begin to resolve this. I've done some searching and only found results with similar situations that aren't quite the same, it seems this is commonly an issue with linux installs into partitions of a drive that is shared with windows, but that's not what I'm doing (at least not for the main install, I guess that is kind of what it's doing with the bootloader?)

I can manually erase disk #4 if that would help, but is there some way I can manually go in and clear out the old bootloader (without messing up the windows install/boot)?

Other specs in case it's relevant:
* Ryzen 7 3800X 3.9GHz 8-core CPU
* 32GB DDR4-3200 RAM
* Gigabite Vision OC 12 RTX3060 GPU

This entry was edited (2 weeks ago)

lemmy - Link to source

Racing Handbrake Not Showing Up As Joystick

As the title says I am trying to get my handbrake to recognize as a joystick so I can use it.

Running Arch.

This is the device in question.
amazon.com/dp/B07SPVY2WL

It shows up with lsusb as the following.
Bus 001 Device 006: ID 1021:1888 ZSC ODDOR-HANDBRAKE

Device info from cat /sys/kernel/debug/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=04 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=1021 ProdID=1888 Rev= 1.14
S: Manufacturer=ZSC
S: Product=ODDOR-HANDBRAKE
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=01 Prot=05 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms
E: Ad=01(O) Atr=03(Int.) MxPS= 64 Ivl=10ms

I found this bit of information but it's related to openSUSE and is quite old but I'm hoping it might help.
spinics.net/lists//linux-input…

It doesn't show up in /dev/input/...

Any ideas on how I could get this thing recognized so I can use it?

Update 1:

I got connected with someone at the Simracing space on matrix per the advice from @lemonuri@lemmy.ml and they helped me to get it working. Here is what we did.

Create the file 99-handbrake.rules in /etc/udev/rules.d and add the two following lines to it.

SUBSYSTEM=="usb", ENV{ID_VENDOR_ID}=="1021", ENV{ID_MODEL_ID}=="1888", RUN+="/bin/sh -c 'echo 1021 1888 > /sys/bus/usb/drivers/usbhid/new_id'"

SUBSYSTEM=="input", ATTRS{idVendor}=="1021", ATTRS{idProduct}=="1888", ENV{ID_INPUT_JOYSTICK}="1"

This forces the device to usbhid as a joystick whenever it is plugged in and recognized.

Run the following command to reload the device rules if you don't want to reboot. Otherwise you can omit the command and reboot.

sudo udevadm control --reload

It now shows up and is working.

So the device was registering a button at the end of the pull and showing up as an Xbox controller while not recognizing the axis being moved so it was all or nothing.

I installed protopedal and following advice created a dummy device which remapped the inputs so that it registers the analog input only which worked.

protopedal --name "handbrake" -b JOYSTICK -a THROTTLE -s 0:THROTTLE -a Y --no-auto-buttons --no-auto-axes /dev/input/by-id/usb-ZSC_ODDOR-HANDBRAKE-event-joystick

Update 2:

All credit goes to JacKeTUs for his work on helping me out. He is making/made the driver for this. It may go into AUR for Arch users, so if anyone ends up looking for support for this handbrake you can find the source at the below link.

github.com/JacKeTUs/hid-oddor-…

This will install the driver (currently it needs to be loaded after running sudo make) and the udev rule. It eliminates the need for protopedal but does require launch options to be set.

SDL_JOYSTICK_WHEEL_DEVICES=0x1021/0x1888 %command%

Update 3:

Latest push eliminates the need for steam launch option and removes the button from the device.

GitHub - JacKeTUs/hid-oddor-handbrake

Contribute to JacKeTUs/hid-oddor-handbrake development by creating an account on GitHub.
GitHub
This entry was edited (2 weeks ago)
in reply to suzucappo

lemmy - Link to source

lemonuri

I am pretty sure you need to configure more (fake) buttons for the handbrake, I had the same problem. Otherwise it does not get recognized as a gaming device.

I can look up later how I solved this or you can ask the simracing linux community, which helped me with a couple of similar pronlems before:

A place for all the niche of niche gamers to discuss and join other simracers!\
Join the Simracing space here matrix.to/#/#simracing:matrix.…


Matrix - Decentralised and secure communication

You're invited to talk on Matrix. If you don't already have a client this link will help you pick one, and join the conversation. If you already have one, this link will help you join the conversation
matrix.to

lemmy - Link to source

Instances are websites. Federation just means they can automatically communicate directly between multiple intakes, and share information without requiring user interaction.

Any website that implements ActivityPub APIs properly can federate with other sites as part of the fediverse.

In the light of the above ☝️ statement and in the context of the given lemmy post, l am presenting three websites as an example :

zessa.in/

urthy.in/

1ness.in/

Can such websites be created and made to federate as a part of the fediverse ?


1ness.in

Discover guilt-free flavor with our vegan dairy alternatives! Creamy milk, decadent cheeses, and rich yogurts redefine delicious!
1NESS - Come Together.

lemmy - Link to source

Window Tearing(?) Issue on Nobara

EDIT

So anything I said below was all a lie, it turns out that the issue was kde and my monitors, which are 240hz. I swapped to gnome and the issue disappeared, and then I installed bazzite kde on a second drive and the issue reappeared. Setting my refresh rate to 120hz stopped the flickering and upon setting it back to 240hz I do notice an appreciable decrease in artifacting. I have no idea what to do with this information, but if anyone is experiencing this try just decreasing your refresh rate for your monitors.

Howdy,

Just installed Nobara again and am trying to figure out why this is happening. I think it's a firefox thing since I haven't seen it happen in any other application; basically anytime I do a lot of scrolling, the firefox window breaks down and I can see my desktop background behind it. It always happens in the bottom right cornerish part of the window. I'm up to date on all updates as far as I'm aware. I did some googling and checking out the nobara discord but I couldn't find anything related. I tried recording my screen via spectacle to show the issue, but it wouldn't capture the issue.

Any help would be appreciated; I am a linux beginner so dumbing down any info you have would be nice. Thanks!

This entry was edited (2 weeks ago)
in reply to ferric_carcinization

lemmy - Link to source

Valencia

Thanks for the response, definitely helpful! My follow up to that would be I'm still not sure how updating would work if I run the command you posted. Once I run that in the terminal, how do I know when there is an update for firefox? Will firefox just tell me like in windows, and update itself? Do I need to run a specific command in the terminal to prompt updates?

While I have you here too, I've just found one more bug that's been bothering me... In the application launcher, when I try to use the scroll bar the cursor won't select the bar itself, instead just defaulting to resizing the window. Any ideas on that? It's kind of a pain but I could live with it. Googling again didn't really bring up anything conclusive. Here's a clip to see what I'm talking about. Thank you again!

in reply to Valencia

lemmy - Link to source

ferric_carcinization

If the grahical app store has asked for a password when updating, like on normal Fedora (what Nobara is based on), all programs installed with sudo dnf install <program(s)> are also updated. A update to native packages can also be ran with sudo dnf upgrade. Flatpaks can be updated from the app store or with flatpak update. (no sudo, as that just raises the privileges for the next command, like dnf)

Sorry, I don't know about the scroll issue. The scroll wheel on a mouse or dragging 2 fingers on a touchpad should still work.

TL;DR:
If you are prompted for a password when updating, everything's fine. This should be the case for you, as Nobara is based on Fedora, which supports this. Otherwise, you have to run sudo dnf upgrade or equivalent for your distributions's package manager.

This entry was edited (2 weeks ago)

lemmy - Link to source

[Solved] How to get fan sensors working?

I recently wiped Windows in favor of CachyOS, and it's been lovely! However, I have one outstanding issue that I can't seem to figure out.

To start, I have a Gigabyte B550I Aorus Pro AX motherboard. I followed the guide on the Arch Wiki for my particular chipset.

I still can't seem to control my cooling fans.
* I have lm_sensors installed
* I installed CoolerControl
* I used modprobe it87 force_id=0x8628
* I tried adding the .conf files to /etc/modprobe.d/ and /etc/modules-load.d/
* When the steps above didn't work, I installed the it87-dkms-git package

No matter what I've tried, the only time the fan sensors get detected is when I also specify acpi_enforce_resources=lax in GRUB. From what I barely understand, that's not an option you want to leave on permanently, but perhaps y'all know better or have other ideas.

If it helps:
* Motherboard: Gigabyte B550I Aorus Pro AX
* Latest CachyOS kernel
* Boot: GRUB

Edit: I have a semi-solution.

sudo modprobe it87 force_id=0x8688 ignore_resource_conflict=1

...allows the module to load without completely changing the acpi policy. I still don't know how to make it cleanly permanent or automated, but this is significant progress.

Also note that it should have been 0x8688 in my case, as revealed by sensors-detect.

Edit 2: Added

/etc/modules-load.d/it87.conf
it87

And

/etc/modprobe.d/it87.conf
options it87 force_id=0x8688 ignore_resource_conflict=1

And everything loads automatically! Thanks everyone!

lm_sensors - ArchWiki

wiki.archlinux.org
This entry was edited (2 weeks ago)

lemmy - Link to source

An EXTREMELY Simple Guide to Mastodon

I think this is the way we should communicate, when presented with the question on how to get on Mastodon:

Copy paste from the link:

How do I use Mastodon?


  • Download the Mastodon app from the Apple app store or Play store.
  • Create an account (just like Twitter or any other social media)
  • Follow people, and get posting.


Why do tech journalists say it’s too confusing to catch on?


I have no fucking idea.


EDIT for clarification, don't take this too seriously:

This “guide” is a bit of a joke made out of frustration. If you actually want to know more, including why I feel it has potential to free us from the dystopian hellscape that is modern social media, here is the “real” guide to Mastodon. It still uses simple language (and has lots of pictures!):


Please share widely


An EXTREMELY Simple Guide to Mastodon

Did somebody tell you it's too confusing?
Justin (Stay Grounded)
This entry was edited (2 weeks ago)

don't like this

in reply to KazuyaDarklight

lemmy - Link to source

klu9

Unfortunately, it looks like Fedilab is a mobile app only.

Also, I've installed it on Android and the default does not show the OP above with replies grouped below.

Looking at its settings, maybe one might affect completely missing OPs, "Remote Conversations". I've enabled it and will see how it goes.

I can't find any setting to make it show replies grouped below the OP.

lemmy - Link to source

Fediverse Report – #116

FediForum has a new date and a new board

The fifth edition of FediForum has been rescheduled, and will be held on June 5-7. The event was originally planned for early April, but got cancelled at the last-minute after transphobic posts by one of the co-organisers of the event were surfaced. FediForum held two sessions in the meantime with the community on how the event should move forward. One of the outcomes is that there is now an advisory board for FediForum with people from the community. For this edition of FediForum, I will be hosting a session on what’s been going on in the fediverse in 2025. The network is constantly changing and evolving, and this session is intended to get you up to speed on what’s been happening in the last half year. More information on that soon.

Bandwagon talks about monetisation and sustainability

Bandwagon is a fediverse music sharing platform that’s currently in development, where artists can share their music. They are currently working on online album sales, and Bandwagon is committed to making this feature available without taking any transaction fees. In order for the project to be sustainable, Bandwagon is a paid 10$/month paid premium plan which will enable online album sales and higher bitrate streaming. At the same time, creator Ben Pate is also committed to keeping the software open source, and says that the project needs other Bandwagon servers to exist if the project is to be successful. – Bandwagon.fm

Discourse and the fediverse

Forum software Discourse has posted a blog talking about how they have integrated ActivityPub into their forums. They explain how Discourse forums can now select per category if it is federated, and thus followable by other fediverse software. It also shows what Discourse-to-Discourse federation looks like, allowing 2 forums to cooperate with each other. Federated forums require a mindset shift as have to get used to seeing forum posts in their microblogging timelines. Forum software like Discourse and NodeBB have made great strides in the technological capabilities regarding what’s possible with federated forums. Now people have to find out and experience what these technological features enable in practical use cases for people.

Bonfire slowly moves towards a 1.0 release

Bonfire is an upcoming fediverse platform, with a core functionality of microblogging with a focus on extensibility. In their latest update about how the platform is moving to a 1.0 release, Bonfire talks about the values and intentions of the platform, writing: “In a world of ‘move fast and break things,’ we’ve chosen a different tempo — one rooted in care, deep listening, and collective stewardship. Slow software means building for long-term resilience and meaningful participation, rather than chasing novelty, speed, or scale.”

Bonfire has taken a deliberate and mindful approach to software development, but their own description of “Slow Software” seems fairly accurate as well, as the team has talked about getting ready for a 1.0 release in the next few months since at least September 2023.

FediDB onboarding

Fediverse statistics site FediDB, operated by PixelFed and Loops creator Daniel Supernault, now has an onboarding tool to help people get started with the fediverse. It asks the user a few simple questions: first to select the type of content they are interested in, such as microblogging, video or forums. Based on that choice, it recommends various platforms. Based on the platform choice it asks for a few simple filters, such as region and community size, before presenting the user with a list of servers to choose from for registration.

The onboarding tool is sleekly designed, and streamlines the signup process by boiling it down to a few essential questions that the user needs to answer. However, this also showcases the issues that the fediverse has with onboarding new users: picking a platform and picking a server are meaningful choices that are hard to fully grasp the impact from as a new user. When it comes to picking a platform, the tool lists a few features for each platform, but comparing the relevance of these features is hard to do as an outsider. And when it comes to picking servers, the challenge is that servers themselves often do not publish relevant information that is needed to make an informed choice of which server to pick.

Mastodon: Giving Journalists Options Away From Big Tech

Saskia Welch from Newsmast writes about Mastodon and the fediverse at the recent International Journalism Festival. A consistent challenge remains to put all the lofty ideals about healthy social networks into practice, with Welch noting: “However, joining the platform continues to be a barrier for many users. A group of Italian women who attended the event abandoned their short effort to join the platform half-way into the presentation, confused about where to go and which app to use.” – WeDistribute/Saskia Welch

Owncast turns 5

The fediverse streaming platform Owncast turns 5 years this month, with a new merch store. One of the challenges of FOSS projects such as Owncast is the sustainability, and Owncast creator Gabe Kangas “at one point exhausted his personal savings so he could work on Owncast full-time.” Kangas says that now “people want to be around in meaningful ways. From the newsletter, core code contributions, the Roku app, people answering questions in chat, people brainstorming in GitHub, it’s important for it to be bigger than myself”. – Owncast Newsletter/Kit Rhett Aultman

For all the links, check out the website itself!


Fediverse Report – #116

FediForum will be next month, Discourse talks about their fediverse integration, and an update on Bonfire.
fediversereport.com
in reply to hoshikarakitaridia

lemmy - Link to source

lgsp@feddit.it

By the way I think the communication can be much simpler:

From here: staygrounded.online/p/an-extre…

How do I use Mastodon?


  • Download the Mastodon app from the Apple app store or Play store.
  • Create an account (just like Twitter or any other social media)
  • Follow people, and get posting.


Why do tech journalists say it’s too confusing to catch on?


I have no fucking idea.


An EXTREMELY Simple Guide to Mastodon

Did somebody tell you it's too confusing?
Justin (Stay Grounded)

lemmy - Link to source

Exploring a new Fediverse + Cloud platform for Indians — feedback welcome!

Hey folks!
We’re a small community working on a new Fediverse-based platform with privacy-friendly services, aimed at making onboarding easier—especially for Indian users.

We're still in early stages and would love your input on what you'd actually like to see.

If you're interested, you can fill out this short survey to help guide our direction:
app.formbricks.com/s/cmavbkwso…

Feel free to ask any questions—happy to chat!


Libre services poll

Thanks a lot for your time 🙏
app.formbricks.com

don't like this

in reply to whoareu

lemmy - Link to source

kushagraj

We aren't hosting it all, as of right now. We'll be picking a few services and scale as required. As for why we're doing it at all is because we have seen for there to be a very few such initiatives in our region and aim to promote the conversation about foss and privacy through our efforts in providing alternative services.

The whole point of fediverse is to decentralise and federate it, so it doesn't make sense to just keep using existing servers!

We plan to use personal hardware and aim to minimise costs wherever possible!

Guidy doesn't like this.

in reply to HaraldvonBlauzahn

lemmy - Link to source

trevor (he/they)

A lot of incorrect assumptions in this article. If you don't like the idea of a key exchange over passwords, I hope you use password auth when you SSH into things 😁

The word passwordless is nonsense. In most cases, most passkey implementations, you need a PIN to unlock your private key to authenticate. PIN = password, except it's numbers only. Nonsense. Passkeys simply obfuscate the problem and move it somewhere else, most often into a PROPRIETARY key management tool. For example, Microsoft wants you to use THEIR authenticator app. Not just any app that adheres to the standard. Nope. This effectively means super-vendor-lock-in. Absolute nonsense.


You can argue that the term "password less" is nonsense, but there is literally nothing about the spec that prevents you from using passkeys as they were designed: with hardware keys that support the open FIDO2 authentication protocol. Yes, you still need a second factor to verify the authentication attempt (via a PIN), but unless you're mailing that key to hackers, the private key generated by your SoloKey, NitroKey, or another open source hardware key, is more secure than any password ever will be.

Passkeys usually require a phone - this is a single point of failure, and one that gives the big companies extra control over you. Phone, number, SIM, and so forth. A beautiful bevy of data. The whole idea of actually having to use your phone as an identity vector is horrible.


Phones support storing passkeys. Phones also support storing passwords. In no way does this mean you must use them for this. You can either use hardware keys, or you can use your favorite open source password manager to store passkeys where you should already be storing your passwords anyway.

You need "biometrics" to supposedly prove you're you to unlock your private key. Biometrics are a form of password, except you can't replace it, and it also gives yet more of your personal data to the big companies. More nonsense.


This is literally a direct contradiction of what the author said in their first bullet point. Use a PIN if you don't like using biometric auth.

The implementation of passkeys is fragmented, vendor-specific, and complicated. Only diehards who love technology can use this. The same kind of people who were "all in" when IoT/cloud crap came out, and now they see their smart homes slowly go offline as big vendors almost arbitrarily cut support for old gadgets and effectively kill products. Because cloud.


Most of this is actually a fair critique. The FIDO Alliance is still working on the spec, and I think they should require any implementation of passkeys to follow the spec to a tee without adding any kind of nonstandard bullshit to their authentication.

However, most advancements in tech begin with only appealing to enthusiasts and later become adopted by wider audiences. It doesn't make them bad that they aren't immediately popular with everyone.

Passkeys only solve one use case - phishing where the user inputs their password and MFA into a fake site.


I'm glad the author can at least recognize that there's at least one thing that passkeys solve that passwords can't. But it's not the only thing. When you enter a password on a site, you're hoping like hell that the service you're using hashes it and hashes it properly. When you authenticate with passkeys, you're sending the site a public key. This key will have way more entropy than any password will, so anyone trying to crack a hashed public key is in for a long, miserable time (obviously not impossible though). But even if they wasted their time doing that, it's a public key. Who cares?

Any service you use passkeys with instead of passwords won't put you in another leaked password database. ~~The public key just needs to be invalidated and~~ you can move on with your life.

This entry was edited (2 weeks ago)

lemmy - Link to source

Improving the Fediverse to allow it to actually take over the social media space.

Decentralization is obviously the big thing about the Fediverse but is it TOO decentralized to gain traction?

There is no reason why they have to be fully separate domains in the same branch. You can set up a system of fully independent moderation and extreme levels of customization while having them all on one site with a front page that allows everyone to see whats popular.

A front page wouldn't prevent individual subgroups from requiring approval to join, it wouldn't prevent subgroups from banning those it doesn't want. It doesn't prevent users from blocking subgroups that it doesn't want to see on the front page.

What would be most useful is that now someone could create an account on the Reddit, Twitter, Facebook(?) alternatives and give them access to every community, and then allow each community to set its own rules, and customize its own to be unique while having a unified product to "sell" and get people to move.

Hot take? Blue Sky should be worked with to join the Fediverse as the twitter alternative and Mastodon should work to be the Facebook alternative

TLDR: One front page and general site for Lemmy, Mastodon....and to sign up and see whats popular and then have fully independent subgroups.

in reply to Sackeshi

lemmy - Link to source

Die4Ever

The people running it are only supposed to act if illegal activity is going on and they are contacted by authorities in the appropriate jurisdiction.


which is the "appropriate" jurisdiction?

what if it's legal in my country, but it is illegal in the country where the server is? I have no other choice of server, you're taking away our ability to join servers in our own countries

This entry was edited (2 weeks ago)
in reply to Sackeshi

lemmy - Link to source

lambalicious

Still too problematic, as what is legal and not in the EU depends on the trendy neo-nazi party du jour. Check Germany, for one, where apparently showing any disapproval of Israel gets you Gestapo'd, or that's what Lemmy administrators in Europe seem to fear. Or Italy / Spain, where any attempt to liberate sports transmissions gets half the internet shut down.

Oh, did I even mention Turkiye?

Honestly, I've always been of the opinion that projects that are intended to be truly international need to build up to some sort of "all humanity" jurisdiction or international waters jurisdiction. Since it's not like the UN is going to provide any sort of aid here.

in reply to lambalicious

lemmy - Link to source

Sackeshi

It won't get bad there it's the richest country and has direct democracy, CHF 5,430 post tax median salary. There's nothing for an authoritarian party to say to convince voters who are the wealthier people (actual citizens) of Switzerland

Also the average assets for adults is over $800K they're too rich to fall to power hungry parties

This entry was edited (2 weeks ago)
in reply to Sackeshi

lemmy - Link to source

TootSweet

Then make the "one true frontpage" for Lemmy or whatever (implement ActivityPub, maybe borrowing some code from the Lemmy codebase itself, or kindof making a fork of Lemmy), and if it's good, it'll be used. If not, it won't.

But then, it might well fall victim to this phenomenon:

XKCD #927: Standards

Lemmy has lots of competing "front pages." How will one more change anything? A more generic domain name or something?

This entry was edited (2 weeks ago)

lemmy - Link to source

Mint/Ubuntu and 9070 issues

So after trying out Mint on my old laptop for a few months I wanted to go straight to Linux on my new build what with it being surprisingly user friendly once past the initial jank.

---The build---
MOBO: Gigabyte b850 aorus elite wifi7
CPU: AMD 9950X3D
GPU: Powercolour 9070xt
RAM Corsair vengance 64GB 5200MHz DDR5
Storage: WD Black SN850X 2TB M.2 PCIe 4.0 Gen4 x4 NVMe SSD

So naturally everything is now on fire.

I started with Mint Cinnamon edition which did install after some initial teething (Boot USB on safemode) but just refused to work with the wifi adapter on that motherboard, it also couldn't see the GPU but I never got to trying to resolve that since the Mint setup is pretty wifi dependant and I wasn't sure it wouldn't fix itself once it could finish sorting itself out.

I then had a friend who's been using Linux for 10 years (Some distro called tumbleweed?) reccomend I try Ubuntu as it generaly supports more hardware. It did work with wifi right out of the box but had this weird issue where it could recognize my GPU and load the right driver but then just give up and use the IGPU on my CPU anyway. Also janky with software with steam (Which I never had issues with on Mint on my laptop) just refusing to work properly and at one point getting into a cage match with snap, even when installed from steams own website rather than the application manager (with an uninstall of the old one in between of course)

We spent a good couple of hours getting slapped with weird behaviours and bugs my friend had never seen before until calling it a day.

So once again I'm here politely asking what the fuck linux!? Seriously though what do I do here, I can just about manage running windows software on afformentioned laptop mint install but linux as a whole just seems to hate this hardware setup.

Alright I'm just going with a stripped down version of windows 10, I've spent 2 days trying things from here and from that friend and from random forum posts of people with the same issue and at this point it seems no one has a consistent fix and I don't feel like building an entire operating system from scratch (nor would I know how)

This entry was edited (2 weeks ago)
in reply to CheeseNoodle

lemmy - Link to source

Successful_Try543

Ubuntu 25.04 plucky currently has kernel 6.14, 24.04 noble only 6.11.

Debian 12 bookworm has 6.1 and the now frozen 13 trixie has 6.12.

For Debian bookworm, the non-free AMD graphics drivers firmware-amd-graphics date from 20230210 (backported: 20241210) and for trixie 20250410.

I don't know how up to date the amd firmware versions in the Ubuntu release are.

This entry was edited (2 weeks ago)

lemmy - Link to source

TIL blocking users on Lemmy is nothing but a placebo

Today I found out that on this platform, "block" is just a fancy word for "filter". Just had an individual user go through my entire profile and downvote everything. So I blocked them, thinking that this would make me safe from any future stalking. But I was just informed that no, any user that you 'block' is actually still able to see everything that you post and vote freely.

All that 'blocking' actually does is hide the person from you. But they're still free to stalk and do as they please. I just tested this out for myself using my other account and sure enough, it's true.

I just want to know, how is this acceptable? I bet you that if I called out this user publically, I would probably end up in hot water myself for harassment or something. And yet 'blocking' is completely fkn useless too. So what recourse does a user actually have here when faced with a hostile user that wants to ruin their experience on Lemmy?

Coming from Blåhaj, I thought I would try 'moderating' my own experience for a bit. But you can't 'moderate' your own experience if the tools to do so are fkn useless and only trick you into thinking that something has been achieved, without actually doing anything useful.

And now I'm starting to see a new value in instances like Blåhaj. Because you actually need admins that give a shit around here or else you're just left to the wolves on a platform that seems more interested in protecting abusive users than allowing users to protect themselves.

Edit: watching you all upvote the person talking shit about how this works on other platforms while downvoting the actual correct information that comes with a source has certainly taught me a thing or two about this platform and the people on it. You all actually prefer misinformation to fact as long as it suits your vibe or opinion more. Like a bunch of fkn MAGAs. I really wish there was a way to disable notifications for this post (another feature missing here) because watching you people upvote misinformation is enough to make me no longer give a flying fuck what anyone here says or thinks.

This entry was edited (2 weeks ago)
in reply to Character_Locked

lemmy - Link to source

Melmi

I think the utility of blocking people on a public platform is kind of fake anyway. If someone is harassing you, and you block them, it's obvious that you did it so they'll just log out and suddenly they can see your posts again. Accounts are trivial to make on the fediverse too so they can always just spin up a new one to harass you.

I think silent filtering is better for that reason because they can't tell that you did it so they won't just immediately switch to a new account and keep going.

Active blocking like you're talking about only makes sense if there's such a thing as "follower-only" posts imo. Otherwise it's a false sense of security because they can see everything anyway just by logging out or switching to another account.

This entry was edited (3 weeks ago)

wordpress - Link to source

GMKtec EVO-X1 Review: Mini PC shows big performance can come from small packages


The GMKtec EVO-X1 is a mini PC that combines a versatile set of ports with a powerful 12-core, 24-thread AMD Ryzen AI 9 HX 370 Strix Point processor with 16-core RDNA 3.5 integrated graphics and an NPU that delivers up to 50 TOPS of AI performance. And all of that fits inside a compact body that’s smaller than a typical 4×4 NUC computer.

First introduced in late 2024, the EVO-X1 is now […]

#gmk #gmkEvoX1 #gmktec #gmktecEvoX1 #miniPc #reviews #strixPoint

Read more: liliputing.com/gmktec-evo-x1-r…

GMKtec EVO-X1 Review: Mini PC shows big performance can come from small packages - Liliputing

Ian W Morrison (Linuxium) (Liliputing)

lemmy - Link to source

Full Disk Encryption on SSD (Debian)

Hi everyone,

as my thread from yesterday about shredding SSD's the right way already was very helpful, another follow-up topic came to my mind, which may also be interesting for me and maybe others too.

Since many PC's often use SSD's and less harddrives nowadays it may be interesting to discuss the full-disk encryption of it.

First of all some questions, which came to my mind:
- Does the encryption of a SSD decrease its performance (read/write-speed) significantly?
- How does the encryption affect the wear-leveling of the SSD and what should be considered to ensure a safe encryption?
- Will functionalities like hibernation still work? Are maybe other functionalities affected in a negative way?

I already successfully full-disk encrypted my old laptop (harddrive) with the instructions from StackExchange.
My computer has a 1TB SSD + 1TB harddrive and I wish to encrypt completely everything, that's not technically necessary. I want to use Debian as my distro.
Could this instruction work the same way as with harddrives?

I'm interested in your knowledge about this.

~sp3ctre

This entry was edited (3 weeks ago)
in reply to ReversalHatchery

lemmy - Link to source

Björn Tantau

As far as I understand it with LUKS1 the whole partition is filled with random looking data and when something changes it does so at random points which doesn't let you see how much data really changed or how much is actually useful data.

But my knowledge is really really spotty, so I might have understood something incorrectly.

This entry was edited (2 weeks ago)

lemmy - Link to source

Something to experiment with and see for yourself if you ever have the time
There's a certain controversial user on here (am I allowed to mention her name) who mentions she uses a Wii U as her main console, and that the internet on Wii U's is weird, and that it turns out that not only is lemm.ee the only Lemmy instance that works on the Wii U, but the way it works on there is so unfitting in just the right way that it causes posts and bans to half-federate like they're in a zombified state of existence. I tried a Wii U and could confirm every part of this I experimented with.

don't like this

lemmy - Link to source

European Open Web Index goes public in June 2025

After 2,5 years of intensive research and programming efforts, the entire Openwebsearch.eu project team is excited to grant access to its pilot of the first-ever federated pan-European Open Web Index (OWI).

From June onward, commercial and scientific development teams of any size as well as interested individuals are welcome to access and make use of almost a petabyte (and growing) of open web data under a general research license or – upon request – under a designated commercial license as well.

Given that the European Commission has launched the InvestAI initiative to mobilize €200 billion of investment in artificial intelligence, the Open Web Index comes with perfect timing.

The OpenWebSearch.eu consortium actively calls early adopters to pioneer innovative projects surrounding vertical web search, argumentative search, LLM applications including RAG and more.

“The OWI symbolizes a first step towards true European digital sovereignty and is a fundamental step in paving the way for a comprehensive open European AI landscape.“ says Community Manager Ursula Gmelch and further:

“Our goal behind this initial pilot phase is to onboard a range of projects from diverse domains to get early feedback in. We look forward to users confirming the quality and value in current functionalities and/or helping us pivot in such ways that real market demands can be met and further expanded upon.“

An official kick-off event will be hosted on 6 June from 10 am to 12 am CEST via Zoom.

Registration to the event is open under the following link:

cscfi.zoom.us/meeting/register…

[,,,]


June Event Announcement: The Open Web Index goes public! - OpenWebSearch.eu – Promoting Europe‘s Independence in Web Search

ows.eu Team (OpenWebSearch.eu – Promoting Europe‘s Independence in Web Search)

lemmy - Link to source

[Solved]No network access after latest update Fedora

cross-posted from: lemmy.world/post/29911877

Everything seems fine, but I have no network access 😅 happened after I restarted for a System update. Can't figure out what is wrong - help please 😊 Wired connection.

Enabled Wifi, but same problem; connect but cannot reach gateway. (other computers and pads are connected, and they work fine).

This entry was edited (3 weeks ago)
in reply to CapriciousDay

lemmy - Link to source

LeFantome

I am not defending Microsoft but I have a different take.

Microsoft has already lost a the enterprise to Linux. They know it but no longer care that much. This is because the real money is in Azure (the Cloud and “the agentic web”). Microsoft makes a tonne of money off Linux and Kubernetes in the cloud. They hope to make even more money off AI. They are ok that this stuff is all Linux based. They get plenty of lock-in from volume contracts and Azure only APIs and services (especially AI sandboxes ).

However, Microsoft knows the importance of developer mindshare and influence. It is still “developers, developers, developers”. They know they cannot really stop devs from using containers and Linux but they want devs using MS software. So, they are building Linux into the Windows desktop.

They hope, I believe, that the devs will prefer the “best of both worlds” Windows experience over the “all in on Linux only” Linux one.

In some ways, they are competing more with macOS. Devs using Linux on the server had been flocking to macOS on the desktop because it is “also UNIX” but with commercial software support and a nice UX. If Linux had won on the server, Microsoft is defending the Pro desktop.

This entry was edited (2 weeks ago)

lemmy - Link to source

ZFS or LUKS/btrfs for my use case

I'd been using ZFS with Void linux on both my laptop and desktop for a couple of months. And ZFS is cool! But I'm thinking not great for my use case, especially for my laptop with it's more constrained resources. Memory usage was a real problem, even after imposing low ARC limits. And the kernel module compile time was long enough to be a bit annoying, especially for a few kernels (I like to keep the last few around, to be safe) as it happens fairly often on a rolling release.

I switched the laptop to LUKS/btrfs a couple of days ago. And I'm thinking that was the correct choice for that. And now I'm considering doing the same for my desktop. As they seem comparable but btrfs is in-kernel and seemingly more system resource friendly. But before doing so I figured I'd ask the community about it. Maybe some important factors or features for either setup that I might not be considering.

Here's the stuff I care about. All of which both offer, but I'm not an expert at either and I don't know how equal they are.

  • Disk encryption. For ZFS everything (except the EFI partition) is encrypted. I use ZFSBootMenu in this scenario. For the btrfs setup I have the kernel/initramfs on an ext2 partition. I do not store any decryption keys in the initramfs. I know grub can decrypt LUKS with limitations, but I prefer this setup. And it feels secure enough to me. Any pitfalls I'm missing?
  • Pools/subvolumes
  • Snapshots. ZFSBootmenu has an option to load a snapshot. For btrfs it looks like I'd need to create a subvolume from a snapshot, which in a recovery situation might mean doing this from recovery media. That's ok, given this is an unlikely thing to encounter. But if anyone knows of an easier way, I'd love to hear it.
  • CoW
  • RAID 1
  • Compression is nice, especially for the laptop

Edit: typo in title.

This entry was edited (3 weeks ago)
in reply to JovialSodium

lemmy - Link to source

𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

IME, btrfs is easier to work with than ZFS. It has all of the features you asked for; its RAID ≠ 0/1/10 are buggy, but 0/1/10 are considered reliable. In the past year, I heard a rumor that they were going to announced RAID > 1 to be also stable, but that's hearsay; I haven't read anything authoritative on the subject - the Arch btrfs page and the btrfs man page both still say 5/6 are not reliable.

I've been using btrfs on a variety of computers and VMs, from tiny little ODROIDS, to laptops, to VPSes, to desktops for... over a decade? I've had much better reliability than ext4. I was attracted to the POLS of the commands, vs ZFS.

I don't know how much my opinion weighs; I have a feeling a data center person would suggest ZFS as being more "enterprise". I've been really happy with it. I've been watching bcachefs for the caching and target options - really neat features useful for home gamers - but otherwise I wouldn't bother - btrfs has been solid and done everything I could want. It was a huge upgrade from mdadm and lvm in UX, and was only possible when disks got so cheap they outpaced my need for RAID5, and I could afford multiple backup drives that held years worth of nightly incremental backups.

in reply to 𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

lemmy - Link to source

JovialSodium

Hearing roughly a decade of successful use, especially on systems with constrained resources, certainly makes me lean further towards btrfs.

its RAID ≠ 0/1/10 are buggy, but 0/1/10 are considered reliable.

btrfs has been solid and done everything I could want. It was a huge upgrade from mdadm and lvm


@ikidd@lemmy.world said that btrfs is poor at software RAID. I'll do a little research in to how it fares for RAID 1 vs mdadm. I don't see any reason I couldn't do mdadm>luks>btrfs if that's the better choice. But if btrfs is reliable and with comparable performance, I'd certainly rather do that.

This entry was edited (3 weeks ago)
in reply to JovialSodium

lemmy - Link to source

𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

I have no doubt ZFS is solid, too, FWIW. I leaned toward btrfs because it was simple, the commands straightforward and clear, nothing required more than one step - this is all super valuable to me because there are other things I want to spend my time on than fiddling with the filesystem.

@ikidd@lemmy.world said that btrfs is poor at software RAID.


You should check for yourself. I haven't used software RAID in years - RAID 0+1 gives me no value - but the btrfs team and Arch wiki say 0, 1, and 10 are solid. You should not use 5 or 6, as they're known to be buggy and even the btrfs man page tells you to not use it. So, yeah? btrfs is poor at RAID 5/6; to my understanding, it's good at 0/1/10.

btrfs can do encryption, compression, snapshots, and some RAID. I found combining mdadm and lvm and FS built a jenga tower, of which if part failed, the entire end result was borked. I once did an OS upgrade and lost the mdadm config, and spent two days recreating it. I never used it on a new machine after that. Separation of concerns is great, but having an all-in-one that can self repair and boot into snapshots is better.

I can't speak to performance. No doubt Toms of someone like that's looked into that in detail.

in reply to 𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

lemmy - Link to source

aksdb

btrfs because it was simple


Personally I found ZFS far more simple. The userspace tools make more sense to me. Also I like, that volumes can have a default (relative) mount point attached. So in a recovery scenario, I simply have to open the zpool with a relative bath path, and then have all my volumes ready to go. If I want to recover a btrfs system with multiple subvolumes, I typically need to know exactly which ones and where to I have to mount (each individually).

Also I go really used to zfsbootmenu.

This entry was edited (3 weeks ago)
in reply to JovialSodium

lemmy - Link to source

deadcatbounce

if you have a look at the btrfs mailing lists post that introduced RAID1c34, they were created because RAID56 were not considered viable or fixable. It's in couched language but reasonably clear. I don't think you're thinking of using those (RAID56) but don't.

Never had any btrfs problems that weren't self generated or date from a really sticky period in btrfs's history (years ago). I've used RAID56 until RAID1c34 became available and RAID10 where I could.

Haven't tried LUKS - btrfs though, although effectively no worse than putting btrfs in a VM, albeit a bit more computationally intensive.

This entry was edited (3 weeks ago)

lemmy - Link to source

Cost of running a mastodon instance

how much does running a mastodon instance of 1000 users costs?
Disabling Images and allowing only text is one of my condition. So if I do that, will that change cost?
I am thinking of a VPS so that i can have greater control over instance functionality

How much Storage and RAM will be required roughly?

This entry was edited (3 weeks ago)

lemmy - Link to source

SSD Drive Problem
I have a new WD Blue 1TB ssd hard drive that doesn't want to get formatted or mounted. When I attach the drive via USB I get an error message of:
Unable to Mount 1.0 Tb volume
An operation is already pending

Eventually I get:
Unable to Mount 1.0 Tb volume
timeout was reached

I have a Lenovo Thinkpad T570 running Linux Mint 22.1 Xia base. "GParted" and "Disks" don't see the drive. Is there something I can do to access the disc or is it toast?

lemmy - Link to source

Shredding my SSDs (NVMe) under linux?

Hey guys,

I want to shred/sanitize my SSDs. If it was a normal harddrive I would stick to ShredOS / nwipe, but since SSD's seem to be a little more complicated, I need your advice.

When reading through some posts in the internet, many people recommend using the software from the manufacturer for sanitizing. Currently I am using the SSD SN850X from Western digital, but I also have a SSD 990 PRO from Samsung. Both manufacturers don't seem to have a specialized linux-compatible software to perform this kind of action.

How would be your approach to shred your SSD (without physically destroying it)?

~sp3ctre

in reply to 𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

lemmy - Link to source

patatahooligan

I don't see how attempting to over-write would help. The additional blocks are not addressable on the OS side. dd will exit because it reached the end of the visible device space but blocks will remain untouched internally.

The Arch wiki says blkdiscard -z is equivalent to running dd if=/dev/zero.


Where does it say that? Here it seems to support the opposite. The linked paper says that two passes worked "in most cases", but the results are unreliable. On one drive they found 1GB of data to have survived 20 passes.

Securely wipe disk - ArchWiki

wiki.archlinux.org
in reply to patatahooligan

lemmy - Link to source

𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

Sorry, it wasn't the Arch wiki. It was this page.

I hate using Stack Exchange as a source of truth, but the Arch wiki references this discussion which points out that not all SSDs support "Deterministic read ZEROs after TRIM", meaning a pure blkdiscard is not guaranteed to clear data (unless the device is advertised with that feature), leaving it available for forensics. Which means having to use --secure, which is (also) not supported by all devices, which means having to use -z, which the previous source claims is equivalent to dd if=/dev/zero.

So the SSD is hiding extra, inaccessible, cells. How does blkdiscard help? Either the blocks are accessible, or they aren't. How are you getting a the hidden cells with blkdiscard? The paper you referenced does not mention blkdiscard directly as that's a Linux-specific command, but other references imply or state it's just calling TRIM. That same paper, in a footnote below section 3.3, claims TRIM adds no reliable data security.

It looks like - especially from that security paper - that the cells are inaccessible and not reliably clearable by any mechanism. blkdiscard then adds no security over dd, and I'd be interested to see whether, with -z, it's any faster than dd since it perforce would have to write zeros to all blocks just the same, rather than just marking them "discarded".

I feel that, unless you know the SDD supports secure trim, or you always use -z, dd is safer, since blkdiscard can give you a false sense of security, and TRIM adds no assurances about wiping those hidden cells.

Aerospike Customer

support.aerospike.com
This entry was edited (3 weeks ago)

lemmy - Link to source

Any window manager suggestion
So Ive been using linux for a long time and mostly with gnome. I know about window managers and how using them will reduce the memory usage by system a lot because they are less bloated etc.
I want to try a window manager on my nixos machine - this will be my first time trying one, I have good knowledge in programming so technical stuff wont bother me that much.
Which window manager do you suggest? Customization is my priority.
in reply to kixik

lemmy - Link to source

𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

Hm? Both bspwm and herbstluftwm have tabbed layouts. It's been so long since I've used i3, but it has them too, right? Sway's a mostly config-compatible, mostly client compatible i3 clone for Wayland, so I'd expect it to have tabs, too. As well as floating windows, which every tabbing WM I've used also supports.

I think I missed your point. What are you saying? Did I say something that made you think I thought tiling WMs could only do tiling?

What I'm opinionated about is configuration files. Technically, even a desktop could be configuration-less, although I've never seen one. I have become insistent that my WM have no configuration that isn't set through a client call. Sway still uses a config file like i3; mostly the same config file, unless it's drifted significantly. That was Sway's whole killer feature: i3 users could switch from X11 to Wayland with only minor configuration file changes.

in reply to 𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

lemmy - Link to source

kixik

Tiling widow managers are popular, but they’re definitely a taste.


Oh, I refered to that in your post. To me all WMs/compositors are a matter of taste, including stacking ones (on wayland from the stacking ones I only like labwc though it's xml config is not what I would prefer). And you already clarified, but it gave me the impression that it was implicit that tiling was a matter of taste, when those WMs/compositors also offer tabbed/stacked mode, which to me it's not tiling at all, and offers something really appealing not so easily to achieve on any stacking WM/compositor.

Regarding config, well yes, if one is looking for no config at all, and still get the WM/compositor to be useful and also to one's liking, then that's hard to find. But the config files once achieving what one likes and is productive with, then one barely looks at it again, and they are usually portable (usually not only across PCs, also across distros).

But I got your point, sort of "plug and play" as they said before, just install it and without any config be productive with it... I can't imagine that. I heard river is pretty close to dwm, but I can't tell much about it. The river idea of dynamic tiling, which seems to be the default doesn't really appeal to me, so I would need to do tabbed mode any ways, which doesn't seem to be the default, so at least for me it wouldn't be that configless... But maybe it would be to dynamic tiling people.

This entry was edited (2 weeks ago)

lemmy - Link to source

Do I still get updates if I install from .deb file?
If I install software from .deb file, do I still get the updates & upgrades when I run sudo apt update / upgrade ? Or is flatpak the way to go? I'm not very familiar with flatpak, so I'm trying to avoid, but it seems that cons are limited.
I'm currently running mint cinnamon (how original, I know), and asking because i can't seem to add mullvad-vpn stable repo.
Thank you for your help,
in reply to bizdelnick

lemmy - Link to source

abrasiveteapot

Really sorry, it's too long ago to remember the exact error,

but IIRC

when you followed the ubuntu instructions for adding the repository it would kick an error because the command included a reference to noble and mint os name is xia so the contents of the osrelease when checked didnt match and it threw an error.

Could be wrong, I didnt document it.

The work around was to edit the commands.

All a moot point now as

a) the instructions now on the mullvad site don't reference noble and

~~b) mullvad now appears to be in the mint store (which is how you should always install if possible~~

Not correct, only true if you've manually added the repo

This entry was edited (3 weeks ago)

lemmy - Link to source

Installing Linux on Surface Pro 8

Hi everyone! I know im not good with technology. I brought a surface pro 8, 3 years ago. I obviously understand that was a mistake and i should have listened to programmer cousin. Its gonna be slighty difficult to install linux on it.

I've researched several youtube videos, but i was wondering if anyone had any tips?Obviously the attachable keyboard has to work and i want the touch screen to work. The surface appealed to me when i brought for those features.

With all the privacy concerns of windows, i want to commit to switching my operating system! Thank you everyone for their help with all my privacy questions. Ive been getting into foss and learning kotlin.

lemmy - Link to source

Lemmy needs AI. [SATIRE]

Lemmy needs AI features integrated, this would help increase the efficiency of poster and commenter workflows, allowing for maximal upvotes per minute, and as a consequence it increases engagement across all communities. The direct increase in output of posters when they enhance their workflow with LLMs is staggering, and comments per minute for each post go through the roof. This allows for discussions to be longer, and LLMs can be deployed on the site in such a way as to write comments that leave the reader desperate to see what the next reply is, even further boosting how many hours people spend on each post.

Lemmy not integrating AI workflows is denying a choice that everyone should be making, AI will replace posters that don’t keep up, so learning AI workflows is now essential for posters and commenters. AI will be completely different tomorrow, the workflows are going to be completely different in a months time, and it will produce even MORE text, and even MORE images. You hear me, you should learn AI right now, otherwise the posters and commenters who use AI will overtake you in terms of upvotes, and then, well you all know how important upvotes are.

I propose that accounts have a mode that can be turned on to auto generate posts overnight, and on top of that AI should try to autocomplete every sentence people type into the editor. This will maximise the benefits to Lemmys written communities. I also propose having an AI art generator built into each post, so every post can have an image, further maximising engagement. Moderators can benefit from the shift in paradigm that AI have brought about, with AI being able to create and moderate communities that no one has even asked for! Lemmy should not only allow but encourage the adoption of these tools, and everyone should be jumping on this revolution like there is no tomorrow.

I also think that the developers should integrate AI into their workflow, it could automatically add features that people don’t even know they want. I am SHOCKED that the developers are still creating Lemmy at this point, as AI can already do 110% of their job, the other day ChatGPT wrote me a sorting algorithm that it told me was totally new, and that it was able to sort any list instantly regardless of size.

My stock portfolio has nearly doubled since I went all in on AI stocks, and I expect it to double in coming months, this tells you just how amazing AI is. Since all the companies are valued this highly despite having quite a small consumer base.

This entry was edited (3 weeks ago)
in reply to n2burns

lemmy - Link to source

mosiacmango

They tend to lag behind on purpose for stability reasons, but a year out of date is pushing it.

Part of the issue they have is that one of the most popular apps for lemmy, Sync, has been abandoned by its dev. They said they have roughly 5k/month sync users, and if they update, their experience will break further. The egregious part is that app has subscription options, and it's still been 10+ months since the last update.

I left Sync for summit a couple of months ago due to the above, and boy howdy is it better. ~~Actual FOSS,~~ huge amount of options, very similar ux and flow as sync. It's a champion.

Here's hoping more people trickle off of sync to a better app and lemmy world can drop that from their issues list.

This entry was edited (4 months ago)

lemmy - Link to source

Linux mint PS4-PS5 controllers

Random sleepy ramble.

Hey I'm new to Linux and mint seems like the easiest to switch over to coming from windows. I have had trouble with pairing Bluetooth PS4 controllers and emulating them as xinput. I used ds4drv but that's a little outdated now. Also I noticed that catchyos just works after pairing it on my other PC. So I spent a while trying to get mint to work without the need of ds4drv, it kept pairing as a wireless controller that wasn't detected as an actual controller through steam or anything else.... I tracked that down to an issue with the Bluetooth manager and maybe missing udev rules so now I can connect using a different manager and it comes up as a PS4 controller....but now I think I need ds4drv to emulate it as xinput so I've came full circle.

My question is do I need ds4drv to be using a Sony controller as xinput and also how does catchyos do it without ds4drv? And should I just screw Linux mint and switch to Catchyos?

in reply to Magnus

lemmy - Link to source

fartsparkles

I thought the drivers were already merged into the kernel as hid-sony or hid-playstation?

Have you tried removing ds4drv and just trying to connect the pad via USB? If that works, you can try pairing via Bluetooth.

It could be your Mint kernel is old and doesn’t have the drivers. I’m on Arch so I’ve had no issues and the pads just work and Steam handles them with no issues.

This entry was edited (3 weeks ago)

lemmy - Link to source

Why Vim Is More than Just an Editor – Vim Language, Motions, and Modes Explained

Why Vim Is More than Just an Editor – Vim Language, Motions, and Modes Explained

Vim is a powerful text editor that improves coding speed & efficiency through its shortcut-based Vim language. While learning Vim can be challenging, it is a valuable skill that can enhance your career as a computer professional.
Data Engineering Blog

lemmy - Link to source

Is Linux compatible with touchscreen/2 in 1 laptops?

Hello all!

Given that Windows 10 is going to be unsupported by the end of this year, I was planning on switching to Linux since my laptop doesn't meet the requirements to run Windows 11.

My current laptop is an HP Pavilion x360 and by far, my favourite part about it is how it's not only a touchscreen, but the hinges allow the laptop screen to lay completely flat just like a tablet, (the interface even changes to a more tablet ish version) it's great for watching movies and drawing. When I switch over to Linux, I want to be able to keep as much of this feature as much as possible. I was planning on installing Elementary OS as it's designed to be more 'plug and play' as I'm not super tech savvy. When I was looking into if converting a touchscreen laptop to Linux, I read that Ubuntu has some touchscreen support which Elementary OS is based on, but I'm not sure how good it is, as all the Reddit threads on the topic were pretty old.

Whats the touchscreen support on Ubuntu like now? If you have a touchscreen laptop running Linux at the moment, how responsive is the screen? Is there other distrios that support touchscreen that are don't have a steep learning curve?

Thanks!

in reply to NeedyPlatter

lemmy - Link to source

ReversalHatchery

I have a similar convertible device, and it's almost good with KDE. KDE components switch to a layout with more whitespace and bigger icons so they are easier to touch, and some KDE programs like the file manager also opens a special menu on long press on files that is an easier to use version of the right click menu.

firefox also handles it well, I can easily scroll a page with momentum, but I can also select text.

my device also has a plastic pen (no buttons or battery in it), and linux knows to ignore touch input when the pen is near the screen so that I can rest my palm on it while writing.

but a major pain point is that so far I haven't found a real touch keyboard. there is Maliit, which is much harder to build locally than other programs, and if you get it to work it is hard to use. then there is squeakboard, but last time I was looking into it that depended on wayland protocols that were not implemented yet in KDE's compositor

This entry was edited (3 weeks ago)

wordpress - Link to source

LILYGO T-LoRa Pager is an ESP32-powered communications device with LoRa, NFC, and GPS


Pagers may have largely gone out of fashion in the age of the smartphone, but the T-LoRa Pager from LILYGO puts a modern spin on the class communications device. It’s a portable device with a 2.33 inch widescreen display, a thumb keyboard for tapping out messages, and support for LoRa, NFC, and GPS (GNSS), theoretically allowing you to communicate without relying on cellular networks.

It’s […]

#lilygo #lora #pager #tLoraPager

Read more: liliputing.com/lilygo-t-lora-p…

LILYGO T-LoRa Pager is an ESP32-powered communications device with LoRa, NFC, and GPS - Liliputing

Brad Linder (Liliputing)

lemmy - Link to source

How to see if your GPU is being used by games or a process in linux?
Title, I am unsure if games are using my GPU or if using my CPU, or maybe my GPU through my CPU, I do not know, something is using my GPU, but I think its just KDE plasma, and I would like to know definitively how to find out
This entry was edited (3 weeks ago)
in reply to IrritableOcelot

lemmy - Link to source

SteveTech

The master branch works well with Intel ARC, I contributed a lot of the ARC changes. I don't think they've made it into a release yet though.

Edit: 3.2.0 has them: github.com/Syllo/nvtop/release…


Release Release 3.2.0 · Syllo/nvtop

New this release Intel XE driver support thanks to @Steve-Tech Supports more metrics when CAP_PERFMON is given to nvtop. See the intel section of the README Broadcom V3D support (Raspberry Pi) ...
GitHub
This entry was edited (3 weeks ago)

lemmy - Link to source

Don't nobody take anything this dude says with anything less than sn ld 50 grain of salt
I think it speaks for itself.
in reply to YiddishMcSquidish

lemmy - Link to source

AbnormalHumanBeing

Check the sticky post about rules concerning this:

!fediverse@lemmy.world is not a place to file your grievances with “free speech”, disrupting users, moderation, etc.

If you have problems with users: File complaints to the mods or just block them.

If you have problems with mods: File complaints with admins of the instance or just migrate to an alternative community.

If you have problems with an entire instance: Just leave it.


And to add: If you do want/need to highlight misbehaviour, stalking or even just rant about injustices happening publicly, there are places like !fediverselore@lemmy.ca (rules prohibit stuff you are personally involved in, though) and !yepowertrippinbastards@lemmy.dbzer0.com where it concerns mod/admin abuse.

lemmy - Link to source

Lemmy needs more donations

An open source project the size of Lemmy needs constant work to manage the project, implement new features and fix bugs. Dessalines and I work full-time on these tasks and more. As there is no advertising or tracking, all of our work is funded through donations. Unfortunately the amount of donations has decreased to only 2000€ per month. This leaves only 1000€ per developer, which is not enough to pay my bills. With the current level of donations I will be forced to find another job, and drastically reduce my contributions to Lemmy. To avoid this outcome and keep Lemmy growing, I ask you to please make a recurring donation:

Liberapay | Ko-fi | Patreon | OpenCollective | Crypto

If you want more information before donating, consider the comparison with Reddit. It began as startup funded by rich investors. The site is managed by corporate executives who over time have become more and more disconnected from normal users. Their main goal is to make investors happy and to make a profit. This leads to user-hostile decisions like firing the employee responsible for AMAs, blocking third-party apps and more. As Reddit is a single website under a single authority, it means all users need to follow the same rules, including ridiculous ones like censoring the name "Luigi".

Lemmy represents a new type of social media which is the complete opposite of Reddit. It is split across many different websites, each with its own rules, and managed by normal people who actually care about the users. There is no company and no profit motive. Much of the work is carried out by volunteer admins, mods and posters, who contribute out of enthusiasm and not for money. For users this is great as there is no advertising nor tracking, and no chance of takeover by a billionaire. Additionally there are no builtin political or ideological restrictions. You can use the software for any purpose you like, add your own restrictions or scrutinize its inner workings. Lemmy truly belongs to everyone.

Dessalines and I work fulltime on Lemmy to keep up with all the feature requests, bug reports and development work. Even so there is barely enough time in the day, and no time for a second job. Previously I sometimes had to rely on my personal savings to keep developing Lemmy for you, but that can't go on forever. We partly rely on NLnet for funding, but they only pay for development of new features, and not for mandatory maintenance work. The only available option are user donations. To keep it viable donations need to reach a minimum of 5000€ per month, resulting in a modest salary of 2500€ per developer. If that goal is reached Dessalines and I can stop worrying about money, and fully focus on improving the software for the benefit of all users and instances. Please use the link below to see current donation stats and make your contribution! We especially rely on recurring donations to secure the long-term development and make Lemmy the best it can be.

Donate


Get more from Dessalines on Patreon

Creating Lemmy
Dessalines (Patreon)

lemmy - Link to source

Just saw this by chance: Donations and Patrons for Lemmy development surged massively on Liberapay in the last weeks!

Don't know what the exact cause was/is for this big surge - but I am glad to see it. No matter what personal problems people may have with the main devs, they are doing great work on the platform.

join-lemmy.org/donate

liberapay.com/Lemmy

Also of interest, since this is a good place to plug things, other threadiverse things:

liberapay.com/PieFed/

And I couldn't find a way to donate to mbin, in lieu of that:

docs.joinmbin.org/contributing…

EDIT: The creator of mbin gave a link in the comments: melroy.org/donate.html

A screenshot of two bar graphs showing the history of donations and patrons of Lemmy on Liberapay. Both show a sharp increase for the end of April and beginning of May, to USD 480 per week from 371 people at the time of the screenshot.

Lemmy's profile - Liberapay

An open source project the size of Lemmy needs constant work to manage the project, implement new features and fix bugs. Dessalines and Nutomic work full-time on these tasks …
Liberapay
This entry was edited (3 weeks ago)

lemmy - Link to source

[Help] Can't restore a fullscreen game after alt-tabbing, and Windows have white border in borderless fullscreen

I recently installed Linux Mint Cinnamon on a laptop, and I'm having a two-sided issue. Web searches have yielded no solution. I'm also very new to Linux.

Problem 1: When alt-tabbing out of a fullscreen application (at this moment, Helldivers 2), the application will minimize, but I cannot restore it. It will appear for roughly half a second, and then re-minimize. I can hear the game still running in the background.

I have tried alt-tab, super+number, and right-click>restore. None seem to work.
I have tried disabling thumbnails for windows, no fix.
Disabling effects, no fix.

Problem 2: As a workaround for problem 1, I tried borderless fullscreen. It works, but there is a white, 1 px border around the screen. I have tried changing themes, no fix. Same thing with disabling effects. I do like the Mint-Y theme, but there's no longer an option to change window borders, from what I've researched. Again, trying a different theme didn't seem to get rid of the white border.

Please help.

This entry was edited (3 weeks ago)
in reply to tetris11

lemmy - Link to source

Dettweiler

It does not seem to work for me. After inputting

wmctrl -a helldivers -b toggle,fullscreen


I just get a quick black flicker and it goes back to minimized. I also tried changing the win argument to :SELECT: from the documentation you linked, but it still doesn't pull up the window and keep it there.

The command does work for other windows, for clarification.

This entry was edited (3 weeks ago)
in reply to pastermil

friendica (DFRN) - Link to source

Nanook

@pastermil If you want a newer kernel than is provided in the apt package manager, you can download the latest from kernel.org, unxz it with unxz kernel-version.tar.xz, then untar it. It will give you a directory like linux-6.14.6, cd to that directory and do a make mrproper to remove any residual crap that might have been left there by the maintainer or a previous build, then if you want the stock debian configuration copy the current config file from /boot to .config, then make any adjustments to the .config, including some automatic adjustments that get made for your environment with make config, make menuconfig, makexconfig, make gconfig, whatever you prefer. For xconfig and gconfig which are graphical configuration GUIs you may need to install some libs that aren't installed by default on Debian but ARE provided in your apt package manager. Then make -j$(NPROC) bindeb-pkg, for example on my machine 18 cores, 36 threads, I would do make -j36 bindeb-pkg to fully utilize the CPU cores, on the 18 core machine this takes about 7 minutes, on my 8 core workstation about 18, when it's done you'll be left with three or four .deb packages (depending upon whether or not save DEBUG is turned on or off in the kernel config). When you are done install the packages with dpkg -i *.deb, check /boot and your new kernel should be installed.

lemmy - Link to source

Copying data from 6 hard drives to 1 big one, in linux
Maybe a dumb question. But is this just a matter of copying over? I have 6 hdds I've accumulated and want all the data from them on one big drive now. They are all ntfs as they are from windows, but I am going to boot from my mint drive to move the files, just so windows isnt running or accessing anything on the drives while I move the data. I'm transitioning to full linux, but I want to consolidate these drives first. I dont want to clone drives, so no dd here, just copying files from 6 different drives onto 1.
in reply to Possibly linux

friendica (DFRN) - Link to source

Nanook

 — (Shoreline, WA, USA)
@Possibly linux To be sure, but I assume since he was formerly running Windows performance wasn't an issue. No, it's obvious he is more concerned with getting the clutter factor down so he stated a preference for a single large drive, and if data isn't important or backed up some other media fine. If not, then you risk losing your data because sooner later drives fail. If performance was really the goal he'd raid a bunch of nvme drives together. This, by the way, is what I do for the system that runs this friendica node, along with an 18 core processor and 256 gb of RAM.
This entry was edited (3 weeks ago)

lemmy - Link to source

dude using the terminal for installing/removing programs is AWESOME
If I want to install something, I can either do "dnf install [program name]" or "flatpak install [program name]". Same goes for when I want to remove a program. And for flatpak at least, I typed ONE WORD from a game I was uninstalling because I didn't remember to exact tag and flatpak asked me "do you want to install [full tag of game]? y/n" like HOW IS THAT POSSIBLE THAT IS SO CONVENIENT
in reply to VitoRobles

lemmy - Link to source

Laser

Some stuff is better, but I overall prefer chocolatey because it is closer to classic package manager experience. Winget will still open the installer windows of some applications. But you can use both, no need to decide for one, they install into the same directories and will manage the other's applications just fine (as they're all standard Windows installers).
This entry was edited (3 weeks ago)

lemmy - Link to source

Customizing the Raspberry Pi Ubuntu image
Hello,
I would like to customize the Raspberry Pi Ubuntu image before I flash it to multiple SD cards. I tried to use Cubic: I downloaded the official image which is an img.xz file. I extracted it, and converted the img to iso since Cubic only accepts iso files. However, when I try to add this source iso in Cubic, it complains about having a wrong file format. Can you suggest a better way to try and customize it? I just need to uninstall some software that are there by default, and install others that are not there, nothing crazy really.
in reply to darko

lemmy - Link to source

raver

Hmm I don't know if there's a "correct" way, but you could flash the stock version on the first SD card and fire Ubuntu up. Then configure your system and shut down.

Next I would dd the whole SD card into an .img file which then you could flash to all other SD cards.

Be aware of changing hostname and static IP for each new sd card to avoid network trouble

This entry was edited (3 weeks ago)

lemmy - Link to source

Italics have taken over my fonts!

I am running Bazzite and downloaded the google fonts from github and extracted all the .ttf files into a folder. I then drag and dropped them into the font manager. All installed correctly.

When I rebooted, I notice that some of my apps now show the fonts as italics. Firefox and Thunderbird show italics, certain websites (like reddit and homarr) all show in italics no matter what type of browser I use.

I rebuilt my font cache multiple times to troubleshoot but no dice. I tried changing the sytem font to something else, no dice. Wondering where to go from here? I am running KDE.

in reply to nmtake

lemmy - Link to source

PerogiBoi

So from this thread it looks like I need to disable this font. I'm not able to as it gives me errors :/

I'm going to restart and see if I still get these errors.

Edit: still have the errors. Nuking this install because I’ve exhausted all troubleshooting. Moved all files to new user and redownloaded and configured my apps. Gives me an excuse to start fresh because the home folder was getting cluttered.

This entry was edited (3 weeks ago)

lemmy - Link to source

How to deploy Docker images to Raspberry Pi w/o using a image registry

Hello, fellow Linux users!

My question is in the titel: What is a good approach to deploy docker images on a Raspberry Pi and run them?

To give you more context: The Raspberry Pi runs already an Apache server for letsencrypt and as a reverse proxy, and my home grown server should be deployed in a docker image.

To my understanding, one way to achieve this would be to push all sources over to the Raspberry Pi, build the docker image on the Raspberry Pi, give the docker image a 'latest' tag and use Systemd with Docker or Podman to execute the image.

My questions:

  • Has anyone here had a similar problem but used a different approach to achieve this?
  • Has anyone here automated this whole pipeline that in a perfect world, I just push updated sources to the Raspberry Pi, the new docker image gets build and Docker/Podman automatically pick up the new image?
  • I would also be happy to be pointed at any available resources (websites/books) which explain how to do this.

At the moment I am using Raspbian 12 with a Raspberry Pi Zero 2 W and the whole setup works with home grown servers which are simply deployed as binaries and executed via systemd. My Docker knowledge is mostly from a developer perspective, so I know nearly nothing about deploying Docker on a production machine. (Which means, if there is a super obvious way to do this I might not even be aware this way exists.)

lemmy - Link to source

How can I delete the Windows 11 operating system from my laptop, which has a dual boot system?

Hey guys, I've been using Linux Mint and Windows 11 via a dual boot setup on two laptops for a while.

I hardly ever use Windows 11, except on my work laptop, so I want to delete it from my personal laptop.

How can I do this? What is the safest and easiest way, and what should I bear in mind?

Thank you in advance for your answers, and have a sunny day!

in reply to theneverfox

lemmy - Link to source

pastermil

I second this. If you have to ask an internet rando, then that means you're not ready.

I'm gatekeeping not for the sake of being an elitist, but because if you mess this up, you may not see the end of this.

There are already resources online. Some are even official by the distro you want to install. Maybe you should refer to that instead of this post.

This entry was edited (3 weeks ago)

lemmy - Link to source

Google's AI now listens to your English language phone conversations

More than half of Americans reported receiving at least one scam call per day in 2024. To combat the rise of sophisticated conversational scams that deceive victims over the course of a phone call, we introduced Scam Detection late last year to U.S.-based English-speaking Phone by Google public beta users on Pixel phones.

We use AI models processed on-device to analyze conversations in real-time and warn users of potential scams. If a caller, for example, tries to get you to provide payment via gift cards to complete a delivery, Scam Detection will alert you through audio and haptic notifications and display a warning on your phone that the call may be a scam.


New AI-Powered Scam Detection Features to Help Protect You on Android

Posted by Lyubov Farafonova, Product Manager, Phone by Google; Alberto Pastor Nieto, Sr. Product Manager Google Messages and RCS Spam and Ab...
Google Online Security Blog

lemmy - Link to source

Feddit.org officially announces they will ban criticism of Israel and pro-Palestinian posts and comments.

Feddit.org announced today that they are changing their rules to match German law despite their server not being hosted in Germany.

Feddit.org now bans:

  • The sentence "From the river to the sea, Palestine will be free"
  • Comparing Israel to the Nazis
  • Calls to end Zionism
  • Calling for the dissolution of Israel

And much more. The full original post can be found here, or

::: spoiler Click here for full text of original post:

Hi.

In the past few days, discontent regarding mod decisions in this community has been brewing, particularly when it comes to comments on Palestine, Israel, and Israeli politics and actions. There are also misunderstandings regarding mod intention and German law. We hope to clear that up with this post.

While the servers of feddit.org are in Austria, most of the mods of this community as well as admins of this server live in Germany. Speaking of, our server admins have also posted a write-up on the same topic.

And with that, let's go:

In Germany, antisemitism is specifically sanctioned in German criminal law, both for speech and as a motivation for other criminal behavior. In addition, Germany seeks to protect the Jewish state of Israel (the so-called "Reason of State" introduced in 2008) and thus verges toward protecting Zionism as well. Certain criticism of Israel/Israelis is also categorized as "Israel-related antisemitism".

Since criminal law is involved, enforcement can mean things like police raids and device confiscations. After such police action, it does not really matter if it was appropriate or if cases are dropped or never charged: The damage is done. All told, it's not that fun.

There is also no point in engaging in discussions about the veracity of statements that could get us into legal trouble. In addition, we believe that you can express most opinions without breaking rules.

If your comment contains the following, it will be removed from this community:

  • Calling for the dissolution of Israel, or calling for a one-state solution without specifying equal rights for all people; Jewish in particular.
  • Calling for a destruction, annihilation, an end of all Zionism or the like.
  • Equating Israeli actions and (historical) Nazism.
  • The slogan "from the river..."
  • Endorsement of or justifications for Hamas or Hezbollah, or slogans or graphics positively referring to these organizations. These are considered terrorist organizations in Germany.
  • ... and obviously: Any of the common antisemitic tropes or calls to violence against Jews or Israelis

Comments will not be removed for the following:

  • Denouncing genocide.
  • Denouncing Israeli war crimes.
  • Criticizing Zionism as an ideology or political movement.
  • Referring to the current Israeli government as "criminal," "expansionist," or "far-right".

If your comment is removed nonetheless, these are not the reason. I'd also like to stress that this community was never a free-speech-absolutist zone: It is a (usually lightly) moderated community. There may also be times when bans go too far. In such cases, please DM the @EuroMod@feddit.org account (which all mods have access to).

:::spoiler To help you understand why, I'll leave an assortment of sources here (translations via DeepL).

  • A news report:
    Berlin in mid-May [2024] around 6 o'clock in the morning. A loud, continuous "banging" against the apartment door wakes student Alina T. from her sleep. [...] When her husband opens the door, several LKA officers, two employees of the district office and the SEK "storm" past him into the apartment. Puzzled, he looks at the search warrant. [...] The background to this was a Facebook entry in the student's profile: "From the river [...]


  • A legal treatise:
    In November 2023, the Federal Ministry of the Interior and for Home Affairs also issued a prohibition order against Hamas.[60] According to the order, "the slogan 'From the River to the Sea' (in German or other languages)" is a distinguishing mark of Hamas[61].
    [...] the current legal situation [regarding "Denial of Israel's right to exist"] is - contrary to what the statements of the Federal Ministry of Justice suggest[63] - anything but clear. Whether incitements to eliminate the State of Israel are prosecuted depends on the respective legal opinion and the prosecution will of the respective public prosecutor's office.


  • Press release from the previous government:
    In this context, Section 111 StGB, which covers public incitement to commit crimes, may also be relevant. Incitement to extinguish Israel's existence by force may be punishable under this provision. The same applies to calls to publicly display the Hamas flag. If Hamas attacks are publicly cheered and celebrated, this may also be punishable.
    This means that people who cheer on Hamas's actions or publicly express their sympathy with the attacks may constitute the criminal offence of "approval of criminal acts" under Section 140 of the German Criminal Code (StGB).


  • Another news report
    > In connection with the controversial Palestine Congress in Berlin, the German authorities have also imposed an entry ban on former Greek finance minister Yanis Varoufakis. "In order to prevent antisemitic and anti-Israel propaganda at the event", several entry bans have been issued, the news agency AFP learned from security sources on Sunday. One of these concerned Varoufakis.
    (Notably, Varoufakis would have spoken about one-state solutions ...)


  • Overview Germany in 2024 by Human Rights Watch

federal reverse (on behalf of the mods of !europe)

:::


Ist die Parole "From the river to the sea" zwangsläufig strafbar?

Seit dem 7. Oktober haben antisemitische Vorfälle in Deutschland stark zugenommen. Doch nicht hinter jedem Fall steckt eine strafbare Handlung. Auch bei bloßem Verdacht kann es zu Durchsuchungen kommen - und sogar zur Abschiebung.
Iris Sayram (tagesschau.de)
in reply to IndustryStandard

lemmy - Link to source

Kaboom

From the river to the sea is literally calling for genocide, the death of everyone who lives in Israel. It's good that they're banning it

Edit: this fucking site. Not sure if trolls, or they legitimately don't know

This entry was edited (3 weeks ago)

don't like this

in reply to unicornBro

lemmy - Link to source

Jiří Král

Cannot speak for other schools in other countries (and I guess this question was targeted at colleges in USA), but I am currently studying Open informatics at Faculty of Electrical Engineering at Czech technical university in Prague and all the courses I have that are not mathematical, but require to use a computer do take into accoun t that you may not be using only Windows, but also MacOS or Linux. I haven't yet encounterered a software that we would be required to use and wouldn't work on Linux, nor did I have to go through any more hassle because I use Linux, but rather contrary to that. In some cases using Linux made things easier for me.
This entry was edited (3 weeks ago)

lemmy - Link to source

Gnome Display Manager (gdm) and XTEST

Hi, I've recently discovered that steam client on linux requires the XTEST extension to handle input from controller. However, I can not enable XTEST on gdm no matter what I've done. Switch to lightdm solves it instanly but I prefer gdm.

Could you provide some hint how to debug it and have you experienced that before? Thank you very much!

I am using Arch Linux with Gnome and Wayland.

This entry was edited (3 weeks ago)
in reply to gnuhaut

lemmy - Link to source

lyoko

Unfortunately I can not login with GDM using X. I am having the same bug as in here :/ For wayland, I have both read/write permissions for my username.

Also I can use the PS5 controller as a mouse just fine. Another symptom I see is when I run xdotool mousemove 150 150, it will print Warning: XTEST extension unavailable on '(null)'. Some functionality may be disabled; See 'man xdotool' for more info.. The null here is concerning to me. Not sure how it says on other system.

[SOLVED] Login kicks me right back to GDM login screen / Applications & Desktop Environments / Arch Linux Forums

bbs.archlinux.org
in reply to lyoko

lemmy - Link to source

gnuhaut

Ok so it's not the uinput permissions.

When you use lightdm, do you use it to log into a Gnome wayland session, same as with GDM? Or is there any other difference between using GDM and LightDM? What exactly is/isn't working, and how can you tell it is related to the XTEST extension?

Also I can use the PS5 controller as a mouse just fine.


Ok, this could maybe be the kernel driver creating a "real" touchpad device. Steam is able to create fake/virtual mouse and keyboard devices, I suspect that's what steam uses XTEST and/or uinput for. So even though your PS5 touchpad works, that does not invalidate my theory that steam wants XTEST for mouse/keyboard input fakery, because that's what exactly what XTEST is for.

So technically, Steam wouldn't require XTEST for controller input, it would require XTEST to map controller inputs to fake mouse or keyboard inputs. I don't know what exactly steam does if XTEST isn't present, like what exactly doesn't work?

And XTEST is an X11 protocol extension, it probably doesn't work properly under Wayland anyway.

The null here is concerning to me.


Dunno, '(null)' might just refer to the default connection (or server or screen or whatever X11 object this refers to), so not sure if this something to be concerned about. I presume X11 clients in general do work? Like xterm or xeyes work, right?

I am having the same bug as in here :/


The fact that you cannot log in may seem/look like that exact issue you linked to, but that's from 2019 and may have a different cause. In general, GDM will start some executable, (i.e. gnome-session or something like that, or at least it used to be gnome-session, haven't used gnome in a while) which if it exits/crashes this will kick you back to GDM. It could crash for many reasons.

You should check the logs for sure for both issues. X11 session logs (relating to Gnome X11 not starting), should be in ~/.xsession-errors (or ~/.xsession-errors.old for the previous session, I think). There may be a /var/log/Xorg.0.log for xorg, which I guess could also be the thing crashing (maybe). There may be other things logged with journald that could be relevant. journalctl --user should show all the logs for the user session. Logs from Gnome, since it runs as your user, would presumably show up there. My guess is all the relevant logs for a Gnome wayland session would also be there, as well as (hopefully) Xwayland errors/warnings, since Xwayland is actually the thing that would report it doesn't support XTEST.

Note that journalctl likes to show the oldest logs first, so look at the timestamps. You can press G to scroll to the end. There are various ways to filter messages, look at journalctl --help. You might want to use --grep to look for anything related to XTEST or xwayland.

Lightdm and GDM are systemd units (systemctl list-units), the logs would show with something like sudo journalctl -u lightdm.

This entry was edited (3 weeks ago)

lemmy - Link to source

New user, new computer, issues with GPU

Have all new stuff all AMD. Running bazzite and the gpu ( 9070 xt ) does not work, when I plug in the monitor to either port type it just compresses everything up at the top of the screen all warped. Everything works fine on the MB ports not sure what I might have done to screw it up. Saw some posts talking about proper versions for the kernel and mesa and both those seemed to be new enough for the GPU ( 6.14.4-104.bazzite.fc42.x86_64 (64-bit) ) and Mesa 25.0.1

Those errors seemed to be in games from their posts though my monitor will not even display the desktop or anything else properly what am I missing?

edit

I was waiting for the card to come down in price and I put my old 3060 TI into this new system at first. How do I check if the drivers updated to new ones or if I have to do it manually? Maybe that is what is wrong

This entry was edited (3 weeks ago)

lemmy - Link to source

PSA: Not all applications use environment variables (Like they are supposed to)

This is mainly a rant post.

I have to use Zscaler on my work PC. I use Sway (Moved from Gnome -> i3 -> sway).

Whenever Zscaler is launched, I used to get a weird error "proxy server not found" but it continued to work otherwise. Now at my company, we used a proxy at one time but we shifted to a no-proxy connection recently.

So I checked all my environment variables, output of set command. Everything was fine. People said it could be because of some weird compliance issue, or kernel etc etc. After a week or so, I gave up on debugging it because most of my work was fine with the 50% functional Zscaler.

One day, I opened Gnome instead of Sway to check something else, and saw that my proxy was on. This is the proxy set in Gnome Settings, not environment file.

I initially dismissed this finding because I thought Gnome is not active during sway so it should not affect it. But then i remembered it's possible to access the gnome settings using gsettings from any distro.

I switched to Sway, and sure enough, when I ran gsettings get org.gnome.system.proxy.http host, I could see the proxy IP.
I set it to null and behold! Zscaler was working perfectly.

I'm like "Who the hell designs software like this? The application should read the environment variables, not Gnome variables!"

Anyway, this was just a reminder to software makers to kindly follow the norms. Don't design your software for one Distro. Follow the guidelines as mentioned in freedesktop.

www

www.freedesktop.org
in reply to xavier666

lemmy - Link to source

Aceivan [they/them]

It's an issue but its a pretty niche one. Even software that works great on most distros might misbehave when you have multiple desktop environments installed. And http_proxy use doesn't appear to be standardized by freedesktop, LSB, etc. Though it is pretty well adhered to: about.gitlab.com/blog/2021/01/…

So yeah, I agree with the spirit of this but its tough to follow the standard when there is no standard


We need to talk: Can we standardize NO_PROXY?

Subtle differences in proxy setting implementations led to surprising problems for a GitLab customer. Here's how we got to the root of it.
Stan Hu (GitLab)
This entry was edited (3 weeks ago)

friendica - Link to source

!Friendica Admins

Because various people have asked for it, I’ve mirrored all the GitLab Bookface and Postbox repositories to GitHub:
github.com/randompenguin1?tab=…

The canonical location is still on GitLab, that's where I'll still be making the actual commits. The Bookface wiki is also still on GitLab (it apparently doesn't get included when mirroring to GitHub). And the actual Releases are still on GitLab because GitHub apparently only mirrors the version tags.

My projects website page, however, is hosted at GitHub because I ran into problems setting one up on GitLab: randompenguin1.github.io/

lemmy - Link to source

What is this "device" in Dolphin? The fact that's it's full is preventing me from doing some things (Fedora Aurora)

For some reason Calibre won't let me do anything because "drive is full" which I assume has to do with this.

Update: I believe I "fixed" the error with Calibre by using FlatSeal to add environment variable CALIBRE_TEMP_DIR that changes the Temp directory to something else.

Install Flatseal on Linux | Flathub

Manage Flatpak permissions
Flathub
This entry was edited (3 weeks ago)

lemmy - Link to source

Is it possible to manage Apple devices on Linux?
I have Linux Mint installed on my work PC. As I work with IT I am sometimes tasked with doing stuff like restoring Iphones and such, which is normally done through Itunes. But there's no Linux support for Itunes, and I haven't been able to install it through Wine. I also can't use a VM as my PC isn't powerful enough for it. I'm hoping there's a solution for this, as I will have to re-install Windows if I can't get it to work on Linux, and I really want to avoid that.
in reply to ssillyssadass

lemmy - Link to source

LoveSausage

A few options

1,Getting a Mac with apple silicon and install asahi , dual boot.
2. Add a new SSD and some ram to your current one and enable virtualization in bios. Might need a bios update as well.
3 Dual boot windows , might want to check out ameliorated.io/
4 Get a old crappy Mac just for the itunes.
5. Use the Linux tools mentioned earlier


Ameliorated

Completely transform your computer in minutes. Simply download a verified Playbook, or use your own, and run it in AME Wizard.
ameliorated.io
This entry was edited (3 weeks ago)
in reply to PlutoniumAcid

lemmy - Link to source

utopiah

Absolutely, but OP will have to explain a bit to their boss why. Maybe we can help OP there?

Fuck that walled garden is not a business value added task so can we, as a community who cares how openness, translate that to C-suite MBA speech?

  • Apple devices are more expensive to manage (source? time from OP to do so? additional hardware?)
  • Apple devices are less compatible with software solution we use in the company (examples?)
  • Apple devices ...
This entry was edited (3 weeks ago)

lemmy - Link to source

the whole system disappeared

cross-posted: feddit.org/post/12443313

Hello, I'm still a noob when it comes to computers.
I had a dual boot Windows 11 and OpenSuse Leap 15.6.
My problem is that I was using my laptop as always and I was simply searching through internet when the system glitched. So I tried to restart my laptop, but then it showed screens with sth like Bios corrupted, blue screen etc. And then it restarted but only with Windows 11.
When I check the settings partition has fully free memory, so it means that my OpenSuse is gone.

What could have gone wrong?

Sorry for the noob question and thanks for any help. I'm just really davastated.

wordpress - Link to source

Divine D. project is developing a Linux phone with a RK3588s processor


The Rockchip RK3588 processor family has been around for a few years now, and it has proven to be a popular option for single-board computers, laptops, and other devices that generally run Android or Linux-based software.

More recently we’ve started to see folks tap this chip for use in Linux smartphones. The first was the Liberux NEXX that was announced earlier this year ahead of an […]

#dawndrums #divineD #linuxSmartphones #mobileLinux #tunisia

Read more: liliputing.com/divine-d-projec…

This entry was edited (3 weeks ago)

lemmy - Link to source

GDM not honoring custom monitor config

So, for context, I have an HDMI dummy plug that is disabled most of the time, but enabled through command-line to use as a virtual display for game streaming with Sunshine.

In GNOME settings, the display is disabled, and that works just fine. I can enable/disable it at will whenever I want to stream games using the new gdctl utility added in GNOME 48.

I want this “monitor” to be disabled in GDM as well since it keeps trying to use the dummy plug as the default display and I can’t see and of the UI elements and have to type my password in blindly. I’ve copied over my monitor config from /home/user/.config/monitors.xml to /var/lib/gdm/.config/monitors.xml as per the Arch Wiki’s recommendations, but when I log out/reboot, nothing changes on GDM. It still tries to show the password entry UI on the dummy plug and my actual display just shows a gray screen.

I know the configs are different for X11 and wayland, but both GDM and GNOME are running under wayland, so that shouldn’t be the issue.

Any help would be appreciated.

I use Arch btw.

Sunshine | LizardByte

A LizardByte project
LizardByte
This entry was edited (3 weeks ago)
in reply to echo

lemmy - Link to source

EccTM

Yeah, seems like it should just be working...

You've probably already got this covered, but when you created your user monitors.xml config, did you have the dummy plug connected and disabled?

Maybe the config:

  • has it included as a monitor and enabled as part of the screen layout
  • or possibly doesn't include it at all, and then GDM just assumes it can/should use it as a new option?
in reply to EccTM

lemmy - Link to source

echo

Yes. Here’s the contents I currently have in /var/lib/gdm/.config/monitors.xml:

<monitors version="2">
  <configuration>
    <layoutmode>physical</layoutmode>
    <logicalmonitor>
      <x>0</x>
      <y>0</y>
      <scale>1</scale>
      <primary>yes</primary>
      <monitor>
        <monitorspec>
          <connector>DP-1</connector>
          <vendor>SAM</vendor>
          <product>Odyssey G93SC</product>
          <serial>HNTW700164</serial>
        </monitorspec>
        <mode>
          <width>5120</width>
          <height>1440</height>
          <rate>239.997</rate>
        </mode>
        <colormode>bt2100</colormode>
      </monitor>
    </logicalmonitor>
    <disabled>
      <monitorspec>
        <connector>HDMI-1</connector>
        <vendor>FUN</vendor>
        <product>Evanlak8K V2</product>
        <serial>0x00006410</serial>
      </monitorspec>
    </disabled>
  </configuration>
</monitors>

The disabled dummy plug is the “Evanlak8K V2” device while my functional monitor is my Samsung Odyssey OLED G9. This config is the same as the one currently running on my GNOME desktop config, but in GDM still defaults to the enabled dummy plug, even with the fixed ownership.

At this point, do you think I should issue a report on GDM’s repository? Maybe the devs there would have more insight

This entry was edited (3 weeks ago)
in reply to echo

lemmy - Link to source

EccTM

My monitors.xml has two <configuration> blocks, with the only real difference being that one has <layoutmode>physical</layoutmode> and the second has <layoutmode>logical</layoutmode>. I don't really think that'd be the issue here though, because if the dummy plug is listed as disabled it shouldn't be trying to use it anyway...?

I think you're right in reporting it to the GDM repo, at a minimum someone there will know where to point you towards figuring this out. Maybe the GNOME Mutter repo might be a related stop for this too, seeing that's the part generating the monitors.xml...

The things that are supposed to be simple are always the bits that suck the most!

in reply to EccTM

lemmy - Link to source

echo

Very well said. Thank you very much for your help. I wouldn’t have known to check the ownership issues or if GDM were properly running Wayland were it not for your help. I’ll reach out to the GNOME devs on the relevant repositories and see if they might be able to point me in the right direction. Thank you for your time and expertise.
This entry was edited (3 weeks ago)

lemmy - Link to source

Help with Preseed commands for Autostart and Vino

I’m working on a custom Linux Mint ISO (using Cubic) for a dedicated system with auto-login. I’m trying to automate Vino (VNC server) setup during installation using preseed, but I’m running into two issues:

  1. Changing Vino settings in preseed commands

I need to set org.gnome.Vino authentication-methods to ['vnc'] for the autologin user. I’ve tried variations of:

in-target su -c "gsettings set org.gnome.Vino authentication-methods \"['vnc']\"" username

But the setting doesn’t persist. I’ve also tested in-target sh -c and direct gsettings calls without luck.

What’s the correct way to apply gsettings changes for a specific user during preseed?

  1. Autostarting Vino Server

I need /usr/lib/vino/vino-server to start automatically after login. Since this is an auto-login system, I’d prefer a method that:

  • Works via preseed (e.g., adding to startup apps).
  • Can be toggled later via Cinnamon’s startup settings (if possible).

What’s the best way to set this up? .desktop file in ~/.config/autostart/? Or another approach? Preferably, it would be more easily configurable in userspace, but if this is the only option then I understand.

This entry was edited (3 weeks ago)

lemmy - Link to source

Daily driving a GNUIX or some of those super libre OSs.

I have a thinkpad lying around. I have used Linux over the last 5 years and I an NOT a power user. I use Mint and it gets the job done for me.

Lately though, the whole libre software bug bit me and I want at least one machine that is libre compatible through and through. I have heard some stuff like Parabola and GNUIX or something like that, but thought it best to ask around first before even thinking about something like this.

My work essentially involves writing documents (LaTeX and LibreOffice), doing statistical analysis, and making lectures. I access emails via Thunderbird. That's it.

Does anyone here daily drive a fully libre laptop?

This entry was edited (3 weeks ago)
in reply to Bogus007

lemmy - Link to source

LeFantome

You can absolutely use Linux without any GNU software. I use Chimera Linux for example (no Glibc, no GCC, no GNU utils). I even get away from some software that Red Hat created according to your definition like SystemD. However, even still, I know that Red Hat is responsible for much of the software I run since I use software like X, Wayland, Mesa, Podman, KVM, PulseAudio, and PipeWire.

It is VERY hard to run a Linux system without using code contributed by Red Hat.

No, Red Hat did not “create” glibc, GCC, or GNOME. They just contributed tens of thousands of lines of code to them. Perhaps more than anybody else over the last 20 years. Ever heard of Ulrich Drepper?

Actually, it is impossible to use Linux without using code contributed by Red Hat as they have been one of the biggest contributors to the Linux kernel itself for multiple decades now.

And to clarify, the Linux kernel is absolutely NOT a GNU project. Very few packages in a typical Linux distro are actually. The full list of GNU packages is here:

gnu.org/software/software.en.h…

Compare it with this list:

redhat.com/en/about/open-sourc…

GNU has been influential but is not essential as you can create a complete Linux distribution without any of it (again see Chimera Linux). Code contributed by Red Hat however is totally unavoidable and completely essential. It is not possible to run a Linux system without it. All the distributions you listed heavily rely on code contributed by Red Hat.

To say otherwise is not just misleading. It is wrong.

I do not use any Red Hat distributions. I do benefit from their contributions and am thankful for them.


Red Hat community contributions

Red Hat community contributions description
www.redhat.com
This entry was edited (1 week ago)
in reply to Leaflet

lemmy - Link to source

LeFantome

Very impressive. The M1 Macs at least seem to be quite functional at this point and everything either has been or is in the process of hitting the mainline.

Lots of work to do of course but many would have bet against getting this far. But there is a big difference between “could be better” and “stuff doesn’t work”. Getting the Rust based GPU driver into the kernel is a major achievement on its own and may do a lot to silence the “Rust isn’t used for anything real in the kernel” crowd as well.

With all the recent drama, I think some assumed the project was on the ropes. But the updates on the M2 and the reduced support burden of their past work leave me pretty hopeful that good progress will continue.

This entry was edited (3 weeks ago)

lemmy - Link to source

In 2025 Fedora Silverblue has better plug and play than OSX....

I'm upgrading my builds and I decided to get a new monitor so I splurged on the Samsung G9 49" Curved OLED.

My personal and work ARM MBP's require significant tweaking to get the G9 working with a good DPI and font rendering.

I finally booted up my desktop tonight and it just works. I literally didn't have to touch anything.

lemmy - Link to source

Linux: How to use energy better in general by fine-tuning laptop battery?

Hello,

I just found out about TLP - a module to download with apt, which is a good utility for maintaining the laptop battery.
You can set a minimum charge value, and a maximum charge value.
But it is not sufficient for my use case.
My question is - is there any utility I can use to discharge the battery WHILE connected to AC?

The reason behind this is:
I want to use the solar power during the day to charge up the battery to 80 or 90% and then discharge the battery in the evening to 15-20%. Afterwards use AC power again.
The solar energy during mid-day is cheaper and available in abundance.

On a big level with many computers this could make a good impact on the energy network, or am I wrong?

This entry was edited (3 weeks ago)

lemmy - Link to source

Simple Bash Script To Always Disable Laptop Internal Monitor When Using AR Glasses

I created a simple Bash script that will always disable the default/internal monitor on your laptop when using AR glasses (or any other external monitor). I find this useful for when using AR glasses such as the XReal One which allows you to change the mode from regular mode to ultra-wide mode and when doing this, it will act as your unplugging the XReal ones and plugging in XReal one again in a new mode, causing the interal laptop display to become enabled.

To keep the laptop display always off, weather the laptop lid is either closed or open, this simple bash script will always disable the laptop screen every X seconds (You can change it by changing the wait variable)

Simply copy this script and create a new bash script such as disable-display.sh, make the script file executable and add it to your startup applications and it will run in the background. You will need to run xrandr command with all of your displays enabled to get the names of the displays and change the variable names in the script accordingly.

NOTE: This script may not work with a full Wayland setup and may only work on X11.

Enjoy

\#!/bin/bash

\#RUN xrandr TO GET THE NAMES OF THE DISPLAYS AND SET THE VARIABLES TO THESE NAMES

readonly default_display="eDP"
readonly external_display="USB-C-0"

readonly wait=5

while true; do
    #Check if there is an external display connected
    if xrandr | grep -q "$external_display connected"; then
        #Disable the internal display
        xrandr --output $default_display --off
    fi

    sleep $wait
done
in reply to utopiah

lemmy - Link to source

trymeout

What company do you work for in XR?

I got the XReal One as a portable ergonomic monitor and I may use them as my main monitor going forward. I have a sit/stand desk with monitor arms which I can adjust the height and position for an ergonomic design to always look straight at the monitor and not looking down.

From my research currently the XReal Ones are the best AR/XR glasses on the market due to the chip built into them, not needing any other devices or software to run, just plug in play. The XReal One Pros which I think are coming out soon have some better specs but to me, not worth the extra money.

I been using them for regular desktop/laptop task and coding and I prefer to use the anchor mode when doing this. I sometimes also use the ultra-wide mode to simulate 2 monitors. I also been using them for gaming and I will either have it in follow or anchor mode but never use ultra-wide mode for gaming.

in reply to trymeout

lemmy - Link to source

utopiah

Mine, we're one in it, me ;)

Interesting, thanks for sharing the use cases and clarifying your choices.

I do also have a standing desk with a relatively large screen on a monitor arm. I also have a walking pad under the standing desk. The goal being to ergonomically have as much freedom as possible while still being efficient.

I did try the XReal months ago but I don't think I tried the Pro.

Otherwise I worked with pretty much everything (Google Glass, Vision Pro, Quest (all models), Monocle/Frames, my own DIY ones, etc) but my main focus is WebXR and 6DoF, so not really replacing a screen. I do understand it is useful, and sometimes as I travel I use the Quest 3 or Vision Pro to work in there but that's typically a temporary measure. My professional perspective is that 6DoF with hand tracking and accessories (6DoF pens, BT keyboard, etc) is the most novel way to interact with information hence why I build open-source WebXR prototypes on that topic.

in reply to Pro

lemmy - Link to source

stormio

Does the rolling release model mean Nobara is based on Fedora Rawhide now?

Edit: I found the answer from the developer on Reddit.

the VERSION updates are rolling. (N41->N42->N43+)

nothing is changing in the update process. we still do a monthly snapshot of fedora and provide that to users. we are -not- using rawhide.

the "rolling" simply means when its time to go 42->43 you'll receive those updates as standard package updates without needing to do any specific commands/changes.

Reddit - The heart of the internet

www.reddit.com
This entry was edited (3 weeks ago)

lemmy - Link to source

Distro for a new user

Jesus. Another one of these? Every freaking day. (Promise it's different)

I personally like mint and pop!os for new users, but for this user I want to try something windows like with more sex appeal. I don't want to have to touch this computer again. Proprietary software is not an issue/consideration. User is techier than most. What has your experience been with kbuntu? Pros/cons? Other suggestions?

in reply to Maragato

lemmy - Link to source

yeehaw

I know I'll get down voted for this, but from that site:

"Microsoft wants you to buy a new computer.

But what if you could make your current one fast and secure again?"

Kind of a sensationalized statement. I've upgraded tons of machines from 2015 and newer to windows 11 without issues. Sure, not all of them, but I'd say a majority of them, and the "upgrade" is free.

I guess I wanted to point out this piece isn't as doom and gloom as it seems.

in reply to yeehaw

lemmy - Link to source

vandsjov

I think you underestimate how many computers that are in use today that can’t be updated to Windows 11.

I, and many others, have run Windows 10 on unsupported hardware. Difference is that Windows 10 didn’t care and Windows 11 actively try to stop you from doing so. So, what is this if not Microsoft now forcing people to buy new hardware, if they have unsupported hardware?

Edit: What where the CPUs on the 2015 computers you upgraded?

This entry was edited (3 weeks ago)

friendica - Link to source

edition v.01a

Image/photo

@ studio0@tumpambae.org
Projekt [Vorschlag passend zum] #Karnavalswahlkrampf2025
#communityMediaProjektIdee iniziert von @aiquez und @jesuiSatire …ᘛ⁐̤ᕐᐷ basierend auf einer Idee von @aiquez aufgrund eines toots von @ chrisstoecker@mastodon.social

#FallVonMerz
Delenda die Ideen des foFritz Merz by @aiquez
Bild aus Wikipedia ueber die Szene des Iden des Ceasar, als dieser aus den eigenen Reihen heraus im Senat zur Strecke gebracht wurde. In das Originalbild der Wikipedia wurden jede Menge fediLogos eingebaut.
ein Lied odar gar mehrere Lieder bis ihn zu einem ganzen Album:
-> Soundtrack zur Wahl/Nichtwahl von Merz / CXU

Themen:
Asozialität
Elitismus von Merz.

- hoffnung auf #FallVonMerz
- Ideen des Merz (sind Shyze ..)

-> Fall von #Brandmauer
-> #FallDesMerz #Merz epic fail

soundtrack [01(?)]:
Vorschlag -> Zeilen einer Strophe

Hochgeflogen
auf #BlackRock gelandet
alle Demokraten verprellt
sich Freundschaft mit Alice eingehandelt
#NiemandWillMerz und seine unfähige Rasselbande .. (Linnemann, Klöckner Spahn, CXU)
deren w'politische Ufähigkeit passt auf keinen Bierdeckelin edition

friendica - Link to source

Publicacion scheduled for monday 2025-02-03 18:00
Dear studi0 community

We decided to add an #element #matrix #privateSpace #chatRoom to our setup and called it: tupambaeORGstudi0
Please be patient in any case as this is complete #Neuland for the admin in charge.

At least he managed to onboard a filmmaker, photographer and writer as the first step to understand how invites work!

So, hi there!
.. self-hosting based in Paris, France newbie @ elena@aseachange.com, director of The Illusionists documentary and #FOSDEM2025 traveler for your new proyect:
💌 #TheFutureIsFederated
The one who host's here 📷 photos apparently at @ ele@photos.elenarossini.com.

To begin with we created 3 rooms:

In the @EDIT | don't follow! profile we creatd already a postString for that Projekt with a very limited time horizon.

Next step will probably be creating a activityPub #podcast handle on cast.tupambae.com by @utopiArte, the admin over there, as content colection and conversation about the idea itself in the EDITing post is already up and running.
Part of the details concerning the cast domain is to figure out how to organize the tools #castopod gives us at hand as it looks like it has quite interesting options to organize cooperation, as stated briefly in a tutorial page created on that site, result of the #learningBYdoing process while installing it: brief Castopod tutorial

Last but not least, we are still trying to drag @lizzischmidt the creator and promotor of the #sundayGimp community experience that is alive and running for over a decade on #diaspora* on to our shores, but federation with diaspora, from a technical point of view, definitely has seen better times in the past. Maybe this very cross community chat option, added right here and now, can help to improve the communication for all of us.

This inicial publication will federate quite well out into the vast space of the #fediVerse, but to see comments from the diaspora bubble and the #activityPub sphear, youll have to visit this original page on this friendica server.
Unless of course you are friendican yourself.

So, with no more further introduction, let's jam the #fediFolks!

tube.tchncs.de/w/u7q2ddpNfv6cU…

friendica - Link to source

(friendica post, please visit the originating page in desktop to get a full glimpse)
// v.03
Link to previous versions of this proposal

Red the Bean wrote:

Interesting... I shall contribute 😈
..
I am confused

Mina is your friend wrote:

As long, as it is easy like that, I shall be the bouncer (patobica).
..
I am confused myself.

Daniel Prieto wrote:

I must confess that this thread is quite confusing for me too.
..
Some mushroom experience got me here. I kinda guessed...

bitPickup wrote:

That's good!


A first audio take that somehow sums up "life, the universe and everything" of @bitpickup:

Mindmap created with freeplane to increase confusion summing up in a graphical way, goals, realities and tools at hand.

Trying to drag others into this we mentioned:
@aiquez who had joined forces in the first @studi0 project #fallVonMerz and re-shared the first version of this post already.
@crossgolf_rebel - kostenlose Kwalitätsposts, a decade long contact out here in the fedi, kinda reference, who does audio recordings and has experiences with podcasts publishing on funkWhale. He fav'ed the first version of this post and added a thinking face to it.
@Mina became the self-proclaimed patovica bouncer, a contact that owns all three involved languages (spanisch/german/englisch), has apparently real life knowledge of the region down here (or there, or anywhere), and claims to see everything.
@Red the Bean, a confused squirrel.
@Daniel Prieto, a quiet confused local interested in mushrooms.

Right now mysteriously we might have gotten our hands on a local contact that can or could help, as pointed out in the initial audio take, when it comes to check the truths behind our virtual reality out here.

As a means of tools, besides ourselves and our very own skills, we do have:

fediVerse profileseach and every ones profile(s)
peerTube profileshere and there and everywhere
media pages the subdomain concept as exemplified in the fallVonMerz project
podcast instances tupambae dot.org and dot.com
phpBB permacultureforumThe Permacultureforum added actually forum and image sections related to aspects that came up in this thread and that actually were overdue.
element/matrix matrix channels
the tupambae principlesas defined in Impressum and TOS
common ground | CC-BY-SA-NC
Terms of Service
unknown
contain lot's of small written rules
change every day
depend on the country you are posting from and the country you are posting to
can't be breached until declared in the very moment
Rules
be kind to each other
do not intent to be rude
do not intent to be hurtful
try not to suppose


To begin with, this sounds like a lot, what do you people think?

layout consideration to work onAs a howTo proposal, let's try to make this post a comprehensive communication about a project. Instead of adding a eternal list of comments, let's try o edit and reedit our comments here so we keep this kinda compact and tidy. We can even come up with posting links to new conversation strings on specific topics or off-topic conversations.

Let's play and reinvent another wheel!

(we mentioned the @permaCulture community profile to reach more people that are involved in the underlying goal which is to preserve and evolve the earth of our grand children, creating a permanent human culture based on principals that enable in the first place a permanent agricultural development)
((please feel free to reshare, spread and comment))

Rachel E. S. Lösche

2025-04-05 02:12:00

mastodon - Link to source

@utopiarte @CStamp @tutorial @studi0 @howto @Captain_Jack_Sparrow Interesting... I shall contribute 😈

This entry was edited (1 month ago)
in reply to la tierra de nuestros nietos

mastodon - Link to source

jeSuisatire …ᘛ⁐̤ᕐᐷ

En hora buena, llego el mensaje que mando la patronal guardado por #fediLab la primera noche que el @bitpickup estaba en el hospital para que el supiera cuando hay omnibus de regreso. Se lo mandaron la misma noche que llego cuando estuvo pensando de salir rajando despues de que le dieron el antidoto porque tenia la perra en el coche en la policlinica del pueblo y no solo que es rearisca, estaba por estar al sol encerrada por un par de dias. Sin agua, ni comida ni nada, por no decir .. lindo panorama.

@mina @resl @dprieto @crossgolf_rebel @aiquez @sinmisterios

in reply to jeSuisatire …ᘛ⁐̤ᕐᐷ

mastodon - Link to source

mʕ•ﻌ•ʔm bitPickup

Just stumbled in the very same channel that harbors the #Kleene inviting to play a first sum up of pictures and data that came together on that "event" for editing and content creation. Not sure if this was posted yet somewhere here.
tube.undernet.uy/w/iZPwbDx7cxn…

@jesuisatire @mina @resl @dprieto @crossgolf_rebel @aiquez @sinmisterios

This entry was edited (1 month ago)
in reply to mʕ•ﻌ•ʔm bitPickup

friendica - Link to source

bit Pickup

@mʕ•ﻌ•ʔm bitPickup
#bitPickedBookmark'ing this here and now out of several reasons:

  • primary #doDo right now @bitpickup is working on the #bothrops snake bit information at the phpBB forum reptiles section (see embedded link).
  • the peertube initial material sum up is to slow and should be seen at least at speed 1.5. Also It actually could need a remake cutting it down to a 5 minute short attention span tictoc version by anyone who'd like to help out and btw add to the @studi0 proposal of cooperating in content creation and working out on how to do that.
  • The final language of the sum up has to be spanisch and in any case a dubbing into Brazilian language too, as those represent the main public to address and an important audience for the entire project to catch.
  • Why didn't anybody responded to the #Houston distress call?
  • What happened to: "Quien la vuelve a molestar ( @SinMisterios ), se liga una. Je je." ?
  • There is still floating around a claim that some transcript of the initial audio take exists some where in time and space, is there any truth to or prove for that claim at all?
  • Who did the mention of the mastodon.uy admin and what for?

@Mina @aiquez @jesuiSatire …ᘛ⁐̤ᕐᐷ @crossgolf_rebel - kostenlose Kwalitätsposts @Resl @Daniel Prieto

in reply to bit Pickup

mastodon - Link to source

mʕ•ﻌ•ʔm bitPickup

@bitpickup@tupambae.org
> Who did the mention of the mastodon.uy admin and what for?

troet.cafe/@bitpickup/11449719…

> What happened to: "Quien la vuelve a molestar ( @sinmisterios ), se liga una. Je je." ?

No idea ask the bouncer @mina. It was @jesuisatire who started bitching around again ..

@crossgolf_rebel @aiquez @dprieto @bitpickup@tupambae.com @resl

mʕ•ﻌ•ʔm bitPickup (@bitpickup@troet.cafe)

> @dprieto@mastodon.uy is still into mushrooms, has already decided to ignore our virtual illusions, or maybe even denounced us to his landlord @admin@mastodon.uy .
troet.cafe - Mastodon
in reply to Mina

mastodon - Link to source

mʕ•ﻌ•ʔm bitPickup

> admin didn't complain

Yeah that profile play's quiet quiet.
Probably the best an admin profile can do. In any case I guess they would need to contact @admin first. At least that's how it should be.
Those security checks became quiet common since the mobbing incident on diaspora. That one left the venom deep down in the psyches of more than one out here.
Oh, and the call of attention by the social.tchncs team in the early stages on @jesuisatire.

@crossgolf_rebel @aiquez @dprieto @resl

in reply to mʕ•ﻌ•ʔm bitPickup

mastodon - Link to source

la tierra de nuestros nietos

> admin didn't complain

Mas les vale @bitpickup!
Forma parte de nuestro contacto local, y tiene datos importantes como de sessiones IP y datos de pago para apoyar la instancia y los esfuerzos de @ santiago, asi que mas les vale que se comportan como la gente.
Por no decir:
"¡ Que hizo @jesuisatire ahora ?"

@sinmisterios @dprieto @aiquez @resl

in reply to la tierra de nuestros nietos

mastodon - Link to source

Daniel Prieto

Suillus luteus: sobre hongos comestibles de Uruguay

Sensitive content

This entry was edited (4 weeks ago)
in reply to Mina

mastodon - Link to source

la tierra de nuestros nietos

> Sobre #hongos comestibles de #Uruguay

Ante que nada, genial @dprieto, gracias por el aporte. A ver si lo podemos integrar aun mejor a nuestros hilos y documentación. Por cierto, se agrego al reubicado sitio de huerta, ahora con nombre #permacultura y apellido #tupambae.com una sección "Fungi | Hongos | Setas":
permacultura.tupambae.org/view…

Por el momento sin tema ninguno, sin embargo con la idea de ir agregándole contenido, así que, si te parece bien usaremos estos textos tuyos con enlaces hacia aquí, o mejor, te damos acceso y lo aprovechas como mas te place. De hecho siempre esta la opción de hacer una copia completa del y pasártelo así como viene. Probablemente borrando a lo que no corresponde pasar, pero en si la idea y la oferta esta es es bien simple. Los sitios phpBB se pueden cambiar bastante fácil de dominio y son de código abierto. De hecho undernet monto uno recientemente. El de tupambae.com es un sitio cerrado, no solo que los foros han muerto, abierto se llenan de SPAM y si realmente ay gente que quieren participar con invitación por mail alcanza y sobra. Y actualizaciones a versiones mas nuevas tampoco tiene mucho sentido. Así como esta funciona, el diseño aun copa y ta. Tiene todo lo que hace falta, incluyendo robots.txt que manada a los crawler a donde corresponde, el internet de hoy ya no es lo que era. Por decirlo de alguna manera.

@mina
> Un poco embolante el tema de tener que sacarles la cutícula

Si, aunque sale bien fácil.
Habrá que volver a hacerlo, el primer intento este año si bien aporto una forma nueva y excelente de secado, usando el coche al sol, por razones de urgencia medica se nos complico y se perdió la muestra.

@bitpickup @jesuisatire @sinmisterios @aiquez @resl

Semillero del Tupambae • Ver foro - Fungi | Hongos | Setas

permacultura.tupambae.org
in reply to Daniel Prieto

friendica - Link to source

utopiArte

@la tierra de nuestros nietos

"¡ Que hizo @jesuiSatire mʕ•ﻌ•ʔm :verified: ahora ?"


Dificil decir, nunca se sabe.

Lo que si parece que @Daniel Prieto se recontra confundio de boliche aqui, en realidad sus cometarios deberian ir en el siguiente hilo, eso al menos parece desde el punto de vista de aca:
mastodon.uy/@tierranietos/1143…

(y no, no importa mucho, mas bien una nota aparte ..)

@mʕ•ﻌ•ʔm bitPickup @jesuiSatire mʕ•ﻌ•ʔm :verified:@social.tchncs.de @Mina @aiquez @SinMisterios @Resl

in reply to Daniel Prieto

mastodon - Link to source

la tierra de nuestros nietos

En el fondo "la culpa" es del formato que plantea mastodon. Es friendica que lo evidencia de verdad. Al menos que mires estas cosas desde pantalla de compu y desde un punto de vista de "hilos secundarios" tampoco que importa mucho.
Ejemplo, el hilo de #buenosDias de este perfil:
mastodon.uy/@tierranietos/1144…

Todos los dias simplemente actualizo el tema inicial con la(s) imagen(es) del dia. Una respuesta diaria incial despues aranca "el hilo del dia". Si abris el ultimo comentario de este hilo veras solo el contenido de este dia onda "en una sola pagina web":
mastodon.uy/@bitpickup@troet.c…

mastodon.uy/@remindme@mstdn.so…

Sin embargo, si lo miras desde el tema inicial se transfoma en un eterno hilo poco comprensible y de poco encanto.

Por ello en parte la propuesta tanto de friendica como ademas de un sitio tipo foro, o las paginas html del projecto subdominio "media" o paginas wordpress.
Microbloging es tipo rollo de papel de cocina. Arancas una hoja, la usas y la tiras. Para el chiveo diaria es genial, sin embargo, para textos y contenidos elaborado bien "y con cariño" es un insulto.
(en mi humilde opnion)

@utopiarte @bitpickup @mina @aiquez @sinmisterios @resl


la tierra de nuestros nietos (@tierranietos@mastodon.uy)

Adjunto: 1 imagen #díasDeLuto en el #Uruguay https://troet.cafe/@bitpickup/114502647133623984 ---------------------------------------- * En el correr del mes de #mayo este mismo tema se actualiza editando según el día y la ocasión.
Mastodon Uruguay
in reply to la tierra de nuestros nietos

mastodon - Link to source

SinMisterios

@tierranietos @bitpickup la verdad que como no estoy interesada en tener friendica y estoy bien con mastodon desde el celu, todo estas complicaciones que veo innecesarias desde mastodon, me aburren, ni siquiera me dan ganas de entender cómo funciona el sistema que solo vos con tus 47 cuentas activas usás, me agobia. Me gusta mastodon por la simplicidad, esto lo veo como uan complicación innecesaria. Preferiría que el contacto cin friendica fuera como otros mensajes con mastodon. Por ejemolo al ver cuentas de pixelfed no se ve todas las fotis oero eso no me interesa, el resto se ve como mastodon
in reply to SinMisterios

mastodon - Link to source

Mina

Vos dijiste lo que estuve pensando todo el tiempo:

"todas estas complicaciones que veo innecesarias […] me aburren, ni siquiera me dan ganas de entender cómo funciona el sistema que solo vos con tus 47 cuentas activas usás, me agobia."

Y ahí está el secreto del "éxito" de Mastodon entre todos los sabores del Fediverso:

Es la sencillez.

Llámenme tontita, pero a mí me gusta lo simple.

@tierranietos @dprieto @utopiarte @bitpickup @aiquez @resl

Mafalda le lleva a su nueva amiga Libertad a conocer su amiga cheta Susanita. Mafalda: Hola Susanita, te presento a Libertad Susanita (sonriendo): Hola Libertad. Espero que seamos buenas amigas. Libertad: A mí me gusta la gente simple. Susanita: ¿De veras? ¡Me parece fantástico! Libertad: Sé simple. ¿A ver? ¡Dale! Susanita, primero dudando, hace una figurita de ángel con cara de tonta. Libertad (con cara de decepción): ¡Sonamos!
in reply to Mina

mastodon - Link to source

jeSuisatire …ᘛ⁐̤ᕐᐷ

Que me gusta contexto y coherencia no implica que no sepa apreciar chiveo y las pavadas.

Es mas, voto @pranger para @utopiarte no solo porque usan, comprenden y explican las redes libres, incluso montan instancias y construyen puentes interconectando gente e informacion.

Deben de ser unos atrevidos sabelotodos que solo quieren hacerse ver de aquellos!

@dprieto @aiquez @resl

This entry was edited (3 weeks ago)
in reply to jeSuisatire …ᘛ⁐̤ᕐᐷ

friendica - Link to source

jesuiSatire

Yo 🥰 a #friendica @jeSuisatire …ᘛ⁐̤ᕐᐷ,

.. porque con su quickcomment puedo definir mis #gifComments preferidos para seleccionarlos sencillamente con un par de clics y dejar un comentario de puta madre, envés de escribir un montón de palabras como tu para explicar lo evidente en un mundo de mentes enshittificados.

Escene de la película idiocracy. El personaje principal observa consternado los intentos de los demás participantes en un test de inteligencia de hacer lo evidente.

Por cierto:

porque no solo usan, comprenden y explican las redes libres,


Me parece que debería decir:

no solo porque usan, comprenden y explican las redes libres,

@aiquez @Resl @Mina

This entry was edited (3 weeks ago)
in reply to jesuiSatire

mastodon - Link to source

jeSuisatire …ᘛ⁐̤ᕐᐷ

> no solo porque usan, comprenden y explican las redes libres

Si fue eso lo que escribi, que decis, acaso no sabes leer?

Y ya que estamos @jesuisatire@tupambae.com:
Ahora que te haces el friendicano, que por cierto marca textos escritos en castellano como si fueran escritos en aleman para que el sistema de traduccion no funciona y por lo tanto @resl no entiende nada, te crees algo mejor?

@mina @aiquez

in reply to Daniel Prieto

mastodon - Link to source

Daniel Prieto

Gymnopilus spectabilis: hilo sobre hongos comestibes Uruguayos

Sensitive content

This entry was edited (4 weeks ago)
in reply to Daniel Prieto

mastodon - Link to source

Daniel Prieto

Gymnopilus spectabilis: hilo sobre hongos comestibes Uruguayos 2

Sensitive content

This entry was edited (4 weeks ago)

friendica - Link to source

@Friendica Support
As for my knowledge this intended newbee speaks fluently german, englisch and spanisch, tho maybe du/you/tu is a little bit to shy to ask for help .. not sure.

What is your setup and what have you tried till now @Mina to install your #friendica server, maybe we can figure out what's your problem with the installation.
🤔

Mina

2025-05-14 16:04:33

mastodon - Link to source

@jesuisatire@social.tchncs.de

A mí me interesa el tema de Friendica por las mejores posibilidades de expresarse, pero hasta ahora siempre me falla la instalación.

@jesuisatire@tupambae.com @resl @aiquez


in reply to Mina

friendica - Link to source

utopiArte

@Mina

Not sure what is the actual state of the art of the installer is. Last I "heard" and experienced is that it was broken and that the best way to install is thru the console commands detailed in the helpers page:
/help/Install#Option+B%3A+Run+the+automatic+install+script

tupambae.org/help/Install#Opti…

And yes, it's recommendable to use the git install form, that way you will be able to easily update the installation.

lemmy - Link to source

[Solved] move files older than 30 days from one computer to another using rsync

I have a laptop and a phone in which termux is installed.
I want to move files from my phone to my computer using rsync if all files are older than 30 days. I think I should use find command with -exec rsync.

find . -mtime +30 -exec rsync something

but the problem is my phone's IP address is always changing so how do I transfer file?
I have to run this script in my laptop

solution

i wrote a script which move files and runs in my laptop
1. i can't use hostname because I am on android 9 and don't want to install anything else.
2. most of the time I am offline so using any internet service is not a good idea ( my devices are connected in themselves )

here is my script

\#!/usr/bin/bash

\#checking if script not already running and exit if already running
[ "${FLOCKER}" != "$0" ] && exec env FLOCKER="$0" flock -en "$0" "$0" "$@" || :

set -e

TARGET_MAC="d2:1c:3c:3d:6a:a7"
RSYNC_LOG="$HOME/log/rsync_log.txt"  # Rclone log file


function get_ip() {
  # need to edit sudoers file to run    sudo nmap -sn 192.168.43.0/24 without password
  # Allow members of group sudo to execute any command
  # %sudo   ALL=(ALL:ALL) ALL
  # 'username' ALL=(ALL) NOPASSWD: /usr/bin/nmap -sn 192.168.43.0/24


    sudo nmap -sn 192.168.43.0/24 | grep --before-context=3 -i "$TARGET_MAC" | tail -n 3 | head -n 1 | awk '{ print $6 }' | sed 's/[()]//g'; }


# run command only if wifi is connected
if echo $(nmcli general status) | grep -q -w "connected" ; then

  # for ssh to work in a changing IP address, a configuration line has to be enabled so that it does not ask for yes/no while connecting to a changed ip address
    TARGET_IP=$(get_ip)
  ssh -p 8022  "$TARGET_IP" 'find /data/data/com.termux/files/home/storage/shared/Pictures/ -mtime +30  -type d,f -printf %P\\0' | rsync --append --update --times --atimes --mkpath --verbose --human-readable --remove-source-files --log-file="$HOME/log/synced.log" --exclude='.dtrash' --files-from=- --from0  -e "ssh -p 8022" "$TARGET_IP":/data/data/com.termux/files/home/storage/shared/Pictures/ $HOME/Pictures
This entry was edited (3 weeks ago)

wordpress - Link to source

Pine64 ALPHA-One is a fanless RISC-V mini PC with up to 20 TOPS of AI performance


Pine64’s upcoming ALPHA-One is a small, fanless computer that stands out for a few reasons. One is that it’s made for AIL: the computer has an NPU with support for up to 20 TOPS of AI performance ad ships with a 7b Deepseek/Owen LLM pre-loaded and Pine64 says it supports about 3.5 tokens per second using that model.

Another reason is that the ALPHA-One doesn’t have an Intel, AMD, or Qualcomm […]

#ai #alphaOne #fanless #llm #miniPc #pine64 #riscV #starpro64

Read more: liliputing.com/pine64-alpha-on…


Pine64 ALPHA-One is a fanless RISC-V mini PC with up to 20 TOPS of AI performance - Liliputing

Brad Linder (Liliputing)

lemmy - Link to source

Trakt to increase prices to $60 for all users, including those on legacy, promotional, and grandfathered pricing

I modified the title to make it more descriptive

I also think it's time for the open source and/or fediverse Trakt alternatives to get some love.

The price change is listed as going from $30 a year to $60 a year, and they're also changing everyone to that price:

Starting May 20, 2025, all VIP renewals will move to a standardized price. This means that any legacy, promotional, or grandfathered pricing will no longer apply to renewals processed on or after that date. Instead, all VIP memberships will renew at the new standard rate going forward.


People are not happy on their forum:

forums.trakt.tv/t/upcoming-vip…

This user poll suggests that around 97% of respondents (at the time of making this post) will not renew

forums.trakt.tv/t/poll-will-yo…

[Poll] Will you keep your VIP membership at $60?

Just out of curiosity. Please answer if you are a VIP user. Will you keep your VIP membership at $60? poll
Trakt Forums
This entry was edited (3 weeks ago)

lemmy - Link to source

I've built an app... With AI..... Hear me out!

Edit: I think I need to clarify further that this is a one off thing. I've never had AI build anything for me. This is just one time that I wanted to test it out, and the test came out with a good app that I thought I could share to maybe benefit some. Just to be clear, it's not thinking for me, I still learn on my own, and have AI ONLY explain concepts for me, not code, and it does very well. Asked for opinions, got downvotes. lol

Hi all,
I do code on my own without AI, but in all honesty, I'm not that great (I'm a junior dev at my job, and don't have a lot of experience). I always use AI to explain things to me, not code for me. I made that my mission, so I don't let it think for me because I want to learn. It explains things very well and I've been learning a great deal.

Today, I decided to test it out. I asked it to build an app for me that works on KDE Plasma, my favorite DE.

I use some appimages for some apps. I tried appimagelauncher and gear lever and had some issues with them.

I want to integrate appimages into my system. So, I did a small workaround where I created a small script in ~/.local/bin that has one line after the shebang exec /<path to app image>/<appimage>. Then created a .desktop file that points to that script. I made one for Suyu and VIA and they both worked. I wanted to do it for more apps, but it got repetitive, so I gave AI some requirements and told it to add what's necessary if needed.

I've never programmed in Python, and it chose Python. lol. Ok, let's go with it. It made a pretty nice app. The app does 5 things:
1. Creates that little script I mentioned earlier
2. Creates the .desktop file for that app and makes it point to the correct things (script, icon, startupWMClass(this is so the app will still launch after pinning it to the panel)....etc)
3. Copies the appimage into a "appimages" folder in the home directory
4. Adds an icon of your choosing to the app
5. It makes everything executable

I had it package the app into an appimage (that's something I've never done before and it was pretty freaking cool to learn) and I'm planning on making an .rpm and a .deb packages of it, too.

The honest part. I feel a tiny bit of shame deep inside. But then I look at it and I see an app that could help some people. Who cares how I created it? I have always wanted to contribute something to the Linux world, and this feels like it.

What I'm asking for: your honest opinion. Should I feel that little shame? Should I put it up on GitHub? It would of course be GPL licensed. Maybe some folks want to make it better or contribute or fork it. I love open source and I feel like this could be useful to some.

So, hit me.
Thank you

This entry was edited (3 weeks ago)
in reply to untakenusername

lemmy - Link to source

DonutsRMeh

It was a one time test. One off. Never happened before and won't happen again. I just wanted to test it, and the test came out with a nice app and I thought maybe I should share it. I could've just not said anything and put it on GitHub and no one would've have known. I am not sure how to say it better and make it make more sense. Is my English really that bad that people aren't getting what I'm saying? lol
This entry was edited (3 weeks ago)

lemmy - Link to source

Lemmy.one will be shutting down

This post serves as notice that Lemmy.one will be shutting down in 90 days.

Unfortunately, the moderation features in Lemmy never progressed to the point required to continue maintaining this service, and Lemmy simply does not have the userbase to justify the cost of this service. Myself and the moderation team apologize for the inconvenience this will cause.

lemmy - Link to source

Lemmy.one will be shutting down
cross-posted from: lemmy.one/post/27858506
This post serves as notice that Lemmy.one will be shutting down in 90 days.

Unfortunately, the moderation features in Lemmy never progressed to the point required to continue maintaining this service, and Lemmy simply does not have the userbase to justify the cost of this service. Myself and the moderation team apologize for the inconvenience this will cause.



This is sad news. Hopefully the comms can migrate to other smaller instances.

Edit: just saw this

jonah

2025-05-13 14:29:20

lemmy - Link to source

Lemmy.one will be shutting down


This post serves as notice that Lemmy.one will be shutting down in 90 days.

Unfortunately, the moderation features in Lemmy never progressed to the point required to continue maintaining this service, and Lemmy simply does not have the userbase to justify the cost of this service. Myself and the moderation team apologize for the inconvenience this will cause.


This entry was edited (3 weeks ago)

don't like this

in reply to can

lemmy - Link to source

Die4Ever

Everyone thinks the moderation/admin features need to be improved. I'm curious which improvements people are really needing. Whenever I see big complaints about it (beehaw, lemmy.one) I never see any specifics. Link the filed Github issues for them otherwise the feature requests don't really exist, and I'd like to give them thumbs up reactions so they get prioritized more.
This entry was edited (3 weeks ago)

don't like this

in reply to can

lemmy - Link to source

Die4Ever

we have a game mode called "Zero Rando" (no randomization) that's basically vanilla with QoL improvements and bug fixes

the Randomizer had so many compatibility fixes, QoL improvements, and bug fixes over the original game, this ended up being really useful for new first time players

since you've played before we also have "Zero Rando Plus" which is the same thing, but also includes the balance changes we've made for Randomizer

and we also have "Rando Lite" and "Rando Medium" to get started with the randomization stuff before going up to Normal Randomizer or Full Randomizer

youtube.com/watch?list=PLZIQTa…

mods4ever.com/ | !deus_ex_randomizer@lemmy.mods4ever.com


Deus Ex Randomizer But You Don't Want A Randomizer (how to run Deus Ex in 2025+)

0:00 Vanilla Fixer: automatically applies compatibility fixes without changing the game at all.0:21 Zero Rando mode: features many quality of life improvemen...
YouTube
This entry was edited (3 weeks ago)
in reply to drosophila

lemmy - Link to source

Die4Ever

Transcended seems good. I haven't played it, but it sounds like it still has changes from Revision left over in it (it was forked from Revision). Like cameras seeing bodies, pawns reacting to unconscious bodies, and dogs having the jump attack. But idk if those can be turned off. If they can be turned off then it's pretty similar to our "Zero Rando".

But we have more QoL features available that you can enable which aren't included by default in "Zero Rando". A big one being Password Autofill which isn't enabled by default in "Zero Rando" but it's huge for Steam Deck players.

We also allow selectively enabling balance changes. Like auto augs, or general aug balance changes, there's an option for skill changes, map changes. Here's some of the settings menus:

Also we're open source

This entry was edited (3 weeks ago)
in reply to Die4Ever

lemmy - Link to source

Scrubbles

A built in auto mod is the largest thing. A way to say that this common pattern is spam and to block it system wide, right now we just don't have that. A nice to have stretch goal would be to use some model to fight actual gore or csam material, which just doesn't exist. A moderation dashboard would be great to see users with their comment history, vote trends, high level to see if a person just had an off comment that might be taken the wrong way, or if there is a trend of trolling behavior

These have been opened on the GitHub and either sit open forever or are just closed.

in reply to Die4Ever

lemmy - Link to source

Scrubbles

Why compare us to reddit? We feel like Reddit but from a hosting and admin perspective it's a whole different ballgame. Mods of reddit at worst run the risk of their communities being taken down for a bit if they let content slip through. Here on Lemmy us admins are legally liable for content that is posted. We don't have a large limited liability corporation that will take the hit for us. We need these tools, or we are the ones that will have boots through doors.

sneakyninjapants doesn't like this.

in reply to Scrubbles

lemmy - Link to source

Die4Ever

github.com/RikudouSage/LemmyAu…

I think it's better as separate software. It means it can be developed more efficiently. And this seems to have a lot of features, so it seems it is efficient to develop this way.

GitHub - RikudouSage/LemmyAutomod

Contribute to RikudouSage/LemmyAutomod development by creating an account on GitHub.
GitHub
This entry was edited (3 weeks ago)

don't like this

in reply to can

lemmy - Link to source

fireweed

"Joining the fediverse isn't hard bro, your instance doesn't matter, just pick one."

"Stop using Lemmy.world, we need to redistribute to smaller instances."

The number of times I've heard these fucking lines when people discuss why Lemmy/the Fediverse isn't growing like corp-owned alternatives...

don't like this

in reply to Saleh

lemmy - Link to source

utopiah

you cannot transfer is your imaginary internet points


Ironically enough, even though "imaginary" this aspect might be key to moderation. Assuming (and that's a flawed assumption) that people would upvote/downvote based not on their opinion but rather on how healthy/unhealthy to the discussion a comment is, then those "points" would be useful to see above/below a threshold one would want to interact, e.g. show content or not (or even now show even as to unfold).

in reply to utopiah

lemmy - Link to source

Dr. Moose

Nah the points are laughably easy to game even in centralized reddit since this moderation aspect never made any sense. As if bad actors can't upvote themselves, buy upvotes or just repost any random garbage to /r/funny.

Its a terrible system that turned Reddit into a content desert. Once you decline some new person because "they dint have enough karma" they're never trying to contribute again and you end up with power users who have a moat around content production.

Shared moderation lists already do all of this in an actually functional way. You can subscribe to Bob's list of douchebags and have the client block them. This is something bluesky added quite recently but it already exists on fediverse to instance admins tho afaik not individual users yet.

This entry was edited (3 weeks ago)
⇧