Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated
macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!
@bees Actually the UV creams have shown to be themselves carcinogenic, so it's not about to have cancer or not, but how to get it. All things in moderation, including sun, your body does need vitamin d3 which it produces in the presence of UV.
@Railcar8095 With respect to vaccines and autism, there is a correlation but as the old saying goes casuality is not causality until it is. In my view it warrants research. And I've got no doubt that the number of vaccines they are giving toddlers and children these days is overloading their immune systems.
Autist here who loves to read research about autism.
There is absolutely no correlation between autism and vaccines. Neurodivergence cannot be caused by immune system problems.
People are born autistic with a brain programmed by their DNA to form alternative neurological connections compared to neurotypicals. A neurotypical cannot be turned/mutated into being autistic and vice versa.
The only correlation that exists is that people who are neurodivergent are prone to develop some unhealthy habits (from extra stress, sleep schedules, and being a picky eater etc) which in turn can lower your immune system.
Feels weird that i have to explain this, but not all Research is funded by big pharma.
The majority of research on autism is not about Vaccins either but about understanding the many properties from which it emerges.
By understanding what autism actually is, which is often studied by autistic researchers who are motivated to understand themselves better it becomes self evident that we are far from reaching a technological point where we can create a drug to cause or even simulate the complex nature of it.
You could just aswell claim that vaccins cause people to shapeshift into cats, if you understand the subject matter thats just as non-realistic
If you want to bash vaccines you could state that an experimental accidental wrong mixed variant could cause death. Which would still be an incredibly unlikely freak accident but at least reality allows the technical possibility for such a mistake.
@webghost0101 Here are the facts. 100 years ago, Autism rate is 1-in-40000, today it is 1-in-16. The increase in autism has paralleled the increase in vaccines. And the autism rates parallels the vaccination rates in various regions. As I previously stated, this is a casual not a causal relationship, but given the seriousness of the disease and how many it is affecting, it is worth researching the relationship. Only people who could possibly be opposed to that are those whose profits are threatened.
Thats a cute observation but real facts are the following:
Autism was only formally recognized in the 1940s - there’s no reliable data before that, though historical evidence suggests autistic people have always existed. For decades, people deemed “mentally ill” were institutionalized and hidden from society.
The majority of autistic people can mask their traits and present as neurotypical - they had strong incentives to do so given the historical stigma.
Diagnosis happens more frequently in areas with accessible healthcare, which naturally are also areas with higher vaccination rates.
We now have better diagnostic tools and a less punitive society for people with neurological differences. The diagnostic criteria have expanded significantly - many people (especially women) who wouldn’t have qualified under older definitions now do.
And if we want to include the more modern research done by the autistic community we learn that autism is a part of a bigger phenomenon called neurodivergence which includes adhd and many others. Who also used to be completely excluded by the dogmatic labeling of neurotypicals.
Also you referring to autism as a serious disease shows how little you actually know about it. Just like anyone else neurodivergent people can have psychological disabilities but because they are neurodivergent those disabilities are often different from neurotypical ones. In ““high functioning”” autism disabilities are subjective in context of living in a neurotypical world and are increasingly less disabling with social acceptance and understanding.
My 15+ years of research on the topic is solid tyvm.
My understanding of both biochemistry, psychology and autism itself is also advanced enough to form an educational opinion on any research i read.
The facts i give you can easily be verified and have absolutely nothing to do with big pharma.
I have to question your ability to perform research because it seems to be “Everything that disagrees with my initial belief is conspiracy”
I am very anti big pharma btw, some of the drugs they give neurodivergent kids are incredibly dangerous. They simply dont have annything to do with causing autism.
Oh FFS this isn't the benzene thing again, is it? Benzene is a trace contaminant in everything from the air you breathe to the water you drink. The highest number Valisure came up with was 6 ppm in a sunscreen sample, that's 0.0006%. Even if you decided to inject the whole bottle of sunscreen directly into your veins it would be a fraction of your total exposure for the day.
Using people's fear of cancer to scare them away from effective cancer prevention measures is fucking shameful, do better.
@GingerGoodness Benzene in trace amount is an issue, but also Oxybenzone: Some studies suggest it may be an endocrine disruptor, meaning it could interfere with hormones, and research in animals has raised questions about potential cancer risk, but it's important to note these were high-dose studies not directly relevant to typical human use. Other UV Filters: Ingredients like octinoxate and homosalate have also raised concerns about potential endocrine disruption, and some are banned in certain regions due to their impact on marine life
Look, if you want to smear yourself with chemicals, inject yourself with artificial DNA, etc, go for it, just don't require it of me and my offspring.
@bees There have been some recent studies that have solidified the relationship between autism and the MMR vaccine in particular. Gates live Polio vaccine has killed around 500,000 Africans, who knows how many it's maimed, and not to say Polio isn't worth vaccinating against, I have friends who were partially parallelized by it, but if you're killing 500,000 people something is wrong, and one of my children got heart issues after covid vax, further, he at 40 had two vaccines, damage done on the second, had three incidents of covid and the third involved a 102.9 fever, I by contrast got no covid vax, got covid twice, both times it was your average head cold, and the highest fever I had was 99.1, never went down into my lungs, same for my wife and my other son who did not get vaccinated. Vaccines are immensely profitable to the pharmaceutical industry, and just like profit in the military complex keeps wars going even if it means killing and maiming people, so to the pharma profits force unnecessary and dangerous medical interventions.
I'm planning on getting a laptop within the next month which will be my daily driver for university, and it has a RTX 5060. I know people have lots of issues with NVIDIA on Linux, but I don't know of any specific issues. What issues can I expect running Fedora 42 (KDE) on this device?
I am not responding to most comments here, but I am silently taking them into account.
I had some weird issues with my 3080 Ti on Fedora 41 and 42 and have recently switched to a 9070 XT.
Most games ran fine, but other programs acted strange while games were open. Space Engineers, Escape from Tarkov, and a couple other titles wouldn't allow me to use other programs. The cursor would stay the same as in-game, even when alt-tabbed, and the Discord UI would become unresponsive.
I had several strange issues with my monitor flickering that didn't resolve until I uninstalled and reinstalled my drivers.
I had a horrible issue with Minecraft and other OpenGL games that caused a strobing white screen while playing. I forgot how I resolved that one.
I had to reinstall drivers several times. I don't know how much of it was self-inflicted or just how it goes on Linux.
None of these issues have come up while on my 9070 XT.
Yeah I have a 3070 and have experienced similar sorts of minor annoyances when using Wayland. When I see reports that issues are fixed I try a Wayland session and still find various oddities or issues.
They may be marginal useages but for me I have a dual screen set up and I might game on one and have a video open on another, or even have two video streams open, one on each screen. I find videos slow down and lag, or have artefacts. Issues I don't get on X11 or when I was in windows.
I'm in the same position of looking to upgrade my graphics card and I'm looking at AMD to avoid any more Nvidia related issues. I love using Linux but I don't want to be dealing with Nvidia drivers after past experience.
I use Prismlauncher, it's great for managing multiple versions with different mod lists, Java versions, etc. Nice, clean interface, and you get a background cat!
The Nvidia issue is overblown IMO. Yes, it used to be petty bad a couple of years ago with bugs and glitches all over the place, especially with Wayland. These days not so much. Just use the proprietary Nvidia drivers and you will have a solid experience. It's honestly been over a year since I last had an issue that I could narrow down to Nvidia hardware.
Just make sure to read some reports from people with the same model of laptop. Laptops with very specific hardware can have compatibility issues.
I get what you're saying but I don't think it's overblown having put up with issues myself with a mainstream 3070 card. A year really isn't very long and it's been a series of issues for me. When I've seen reports that the issues are fixed I have tried Wayland sessions and still find basic problems like video lag on my dual 4k set up without any clear solution. I have an Nvidia GPU and I avoid Wayland as a result.
My feeling is that they've fixed the issues perhaps for most useage cases but not all, and it can be enough for just 1 unfixed issue to ruin your experience.
I have a 3070 and am Linux only now; I'm currently looking at an upgrade for my GPU and genuinely I'm not even looking at an Nvidia GPU such have the annoyances been with Nvidia and wayland support. Many people who want specific features of Nvidia cards may not be so lucky
Even if Wayland support is fixed, I'm in the category of once bite twice shy with Nvidia on linux.
I definitely had issues with my 3070. I ran it in Linux for 4 years before recently switching back to AMD. It was usually only minor issues like it not playing well with certain DEs, but sometimes certain driver versions would make my system unusable/unbootable until I could roll them back. I am glad some people never had it happen, but pretending like it wasn't a thing just makes you ignorant.
I don't know about that man. Installed Fedora 42 and GNOME to run with my RTX3080 and GNOME froze and crashed at random constantly. Installed KDE Plasma instead and it runs just fine.
I've been using Aurora which is an immutable distro based on Fedora. It's from the same guys who do Bazzite. I use it on my work laptop with a discrete Nvidia card. I've had zero issues with the video driver. (I use Bazzite on two desktop and a laptop at home, all with Nvidia cards).
I really like these universal blue distro because on the odd occasion that I have an issue after an update, I can reboot into a pinned working version of the system. There are only a couple of CLI commands to learn to pin and unpin the different systems. All currently available systems appear on the grub menu. It's kind of brilliant IMO.
Only downside is that installing RPM packages isn't recommended, but I've found pretty much everything I need through flathub. I have one RPM package installed for VeraCrypt (no flatpak and it doesn't work right in a container) but it hasn't caused any issues for me.
Edit: I should say I can't speak to the ongoing driver issues on the 50 series cards. The newest card I own is an RTX 3080 LHR 12 GB.
Yeah, can't recommend Aurora enough. It's awesome to have literally 0 driver issues, since the system image already contains the drivers pre-installed.
@Interstellar_1 This is the issues I've run into with nVidia gpus. The open source drive, nouveau is incomplete at best and can't take full advantage of features, the drivers provided by nvidia are never up to date with the most recent kernel so you are FORCED to run kernels a few issue old unless no changes to the driver interface has been made in recent history AND if your card is older than eight years and sometimes not even that, nVidia abandons it so you are back to only nouveau drivers. I have not had these issues with Intel graphics or AMD.
I have a 3070 and generally I have no issues with gaming or working in X11.
I have previously had major issues with Nvidia and Wayland and I don't use Wayland as a result on that machine . Many of those issues may have been resolved now but at present there isn't a need to be using Wayland although it is being increasingly pushed. Problems I had were laggyness in the desktop, and videos becoming choppy if I had more than one major process running on the GPU (eg game and video in browser, or two browser windows both with video). I believe such issues have been fixed in the past 12-18m but I'm now in the habit of using X11 on the machine with no incentive to try Wayland again for now.
It is very easy to avoid Wayland - as simple as ensuring X11 is installed and then logging out of a Wayland desktop session and logging into an X11 session once and keeping with that as the default.
I do have a separate AMD machine with integrated GPU and that has been running Wayland from the get go. On that machine I've never even had to think about this issue and have just let my fedora based distro (Nobara) default to Wayland. It's been very much an Nvidia issue.
As long as you're using modern drivers, such as 570 or later (preferably 575), your experience should generally be fine.
Nvidia rightfully earned their bad reputation on linux, but over the last year or two they've put a ton of work into improving it, specifically in wayland support.
One of the last major open issues is DX12 performance. DX12 performance is kinda all over the place depending on your hardware, game, and game settings, but you can generally expect around a 20% performance hit to DX12 games compared to windows. DX11, opengl, and vulkan games perform about as well as windows. Dx12 performance on Nvidia has been a known issue for years and Nvidia was silent on it, but just a few months ago they finally publically acknowledged it and claimed they were working on it. In my experience, Nvidia typically pretends problems don't exist until they actually decide to fix them, so we can probably start expecting improvements to DX12 performance soon.
I've been exclusively gaming with Nvidia on linux (CachyOS) for about a year now and my experience has been satisfactory, so you should be fine.
Nvidia rightfully earned their bad reputation on linux,
Really? IMO not with GPUs. They have released linux drivers for decades, and always in time for new kernel versions. ATI was typically way behind and buggy as hell. I would likely not have switched to Linux on the desktop in 2006 if it wasn't for my GPU "just working", without any fiddling. Performance was always equal to Windows and stuff like multimonitoring just worked. They even had their nice setup utility to configure Xorg for you.
Could they have handled the transition to Wayland better? Maybe. But claiming they earned a bad reputation in regards to GPU when they are the one big vendor that had extremely active linux support for ages is dishonest and unwarranted, IMO.
They dragged their feet on wayland and tried to force EGLStreams for years, causing a ton of work for open source devs. Their drivers on linux are still significantly more annoying to install than AMD or Intel and still use proprietary userspace drivers. This all and more is the definition of earning their bad reputation.
You know what's dishonest and unwarranted? You trying to twist my words and imply I compared them to other manufacturers when I didn't. More than one company can rightfully earn a bad reputation, and ATI definitely did as well. Nvidia was indeed better for a long while, and then earned their bad reputation over the later 2010s and early 2020s.
Just use the newest driver and you'll be completely fine. Even with very recent hardware, everything works as expected for me.
People like to shit on Nvidia, which is deserved for their business practices and relationship with Linux in the past, however most who claim that there are issues clearly haven't used an Nvidia GPU under Linux in a long time.
It should work. The only practical issues are: - Usually, you will have to manually install the proprietary drivers (I think Fedora makes this relatively easy) - Wayland (the protocol most desktop environmentss use nowadays) support may be hit-and-miss at times (it will mostly work but it's not as polished as with Intel/AMD), and Proton (the thing that lets you play Windows games) may not play well either.
The ideological issue (which you probably don't care about) is that it pretty much requires proprietary (non-FOSS) drivers which run in kernel space and so in theory have complete access to all data on your computer (but then so does Intel ME). This is the main reason I personally will never use NVidia cards.
The ideological issue (which you probably don’t care about) is that it pretty much requires proprietary (non-FOSS) drivers which run in kernel space and so in theory have complete access to all data on your computer (but then so does Intel ME). This is the main reason I personally will never use NVidia cards.
The only meltdown I've had with Linux occurred on a minor rev-level update to Debian that plugged some hole in the kernel the NVidia proprietary driver was crawling through. I had used Debian and an NVidia proprietary driver for years on an ancient motherboard. Then suddenly that "solution" disappeared. I had to replace the whole machine. Yeah, it was time. No, I wasn't ready. I don't know whether I should have been more pissed at Debian or NVidia, but I'm still on Debian. After the kernel update, X11 reverted to a default driver, and no install, uninstall, reinstall combination of the proprietary drivers seemed efficacious. I'm sorry I don't remember the exact software rev-levels and drivers involved. All notes I took at the time, if any, were lost in the subsequent crash and recovery from incompetently trying to roll back the kernel update.
I have used both AMD and Nvidia cards on Linux for a long time and with Nvidia it's mostly fine now days, but their driver situation tends to be fine until the rare time that it isn't. I switched back to AMD last year due to the occasional driver issue that left me dead in the water. And by occasional I mean like once every year or so, not something common. It is entirely possible that you'll never have much of an issue, but I started to take note of my Nvidia driver versions and and especially noted when GPU drivers were updated so that I had some notion of where to try to roll back to if I ran into issues. I haven't had any issues like that with my AMD cards for a long, long time in Linux (with Windows obvious the situation was more of the reverse of this).
As long as the graphics isn't that hybrid Nvidia Optimus or whatever the hell they call it, you're good. That hybrid shit was a nightmare to get working, and it never worked right either.
I had to switch back to Windows for now since game performance was noticeably worse with my Nvidia card on Fedora vs Windows. Something running at around 130-144fps cutting down to 80-9fos as an example. So be prepared for that. From what I gather it's unique to Nvidia.
I couldn't game on Wayland for about 20% of my games (very frustrating), couldn't use specific Window Managers like Sway, experience constant screen tearing on X11 (which I often had to use, because the game would crash on Wayland) when gaming, and had a significant performance hit in some games.
CS:GO ran like a dream and actually better than on Windows, but with the release of CS2 my performance on Linux was about 20% worse than on Windows. My 1% lows were also crazy on Linux (median=190fps, %1=80fps). This meant, among others things, that I just couldn't play death match anymore — my FPS would make it unplayable. This was largely an optimization issue and I think some of the 2025 Nvidia driver updates of improved the situation a little for CS2 specifically. The screen tearing on X and the buggyness on Wayland were enough for me to switch though, even if eventual improvements might come.
I am now extremely happy with my 7900 XT, which I got for less than any available 9070 XT (in my region) and which amusingly actually has better performance in CS2 then then the 9070 XT on Linux. It's massively overkill though, I could have just as well gotten a 7800 XT or 9070 (non-XT).
I am still very, very pleased. Hopefully this will last me a few years, unlike the gosh darn 3060 Ti.
Alright, I'm done with my huge block of text. Hopefully this was helpful.
A lot of the info here reads as outdated to me, I have a 40 series card and on bazzite with open drivers it works with zero issues on major titles like Cyberpunk, Horizon, etc. The open drivers have come a long way. It took maybe 5 months post 40 series release for it to work 100% with no glaring issues for me, but 40 series was also the first cards to be launched with the open drivers so it makes sense there'd be hiccups
The only issues I've had on Wayland are color related.
#ad - Shop G FUEL https://gfuel.ly/pdp-cb🌎 Get an exclusive 15% discount on Saily data plans! Use code pewdiepie at checkout. Download Saily app or go to ht...
I was actually kinda wondering the other day why super large content creators with good cash flow from what they already do, don't ditch Google and Patreon or anything else that takes a cut to be nothing more than a middleman to accessing the content? They don't need to host on the same level as YouTube; they could probably make more money hosting their videos on their own website, where they can control what is free or paid for, and can work directly with advertisers themselves.
And how do they get big? How do they get discovered? SEO ?
They're getting huge because of the platform.
I'm not saying google is not evil but it literally gives them their audience.
I watch YT more than anything else by a mile, and if my top subscription moved to their website, and I had to jump through hoops to watch them on my TV device, by installing a browser or something I probably would stop watching them or watch them way less. Another TV friendly app sure that wouldn't be a problem, but I don't see many doing that.
I'm talking about those who have already gotten big, like PewDiePie or Good Mythical Morning (the latter of which started on their own website before youtube even existed, btw). Not the dude who just started a channel last week and has nothing to do shit with.
I pickled/canned about four pounds each of jalapenos and carrots. But I had some peppers left over. Also I had shredded cheese leftover from yesterday's burritos, and half a pound of bacon from yesterday's dinner.
Well that sounds like the start of a wonderful dinner. Poppers would have been too much work. I have a bag of potatoes... Oh. Let's do this. Jalapeno bacon potatoes au gratin.
Cost for pickled peppers: $1.30 per pint Cost per person for dinner: $3.40 (realistically I ate two full servings so this should really be $1.70 each for four people.)
Man, the struggle is real! I often wonder is this just like...a E Asian thing or what? Cause SE Asians can chill with tigers and not have allergic reactions.
The amount in some flu vaccines is roughly equivalent to the amount of mercury found in a three-ounce can of tuna fish.
...
overall, autism rates did not decline after thimerosal was removed from the vaccines, as many anti-vaccine groups suggested it would. Instead, the rates increased.
It is likely akin to sunk-cost. They have already spent so much of their life having a thing to point at, that they don't want it to have been wrong the whole time. Even though it was known to be wrong pretty much right away, that was already too late for some.
Some mindsets require assigning blame to an external locus in order to move on. There has to be no chance it was "their fault" even though it's hard to really describe genetics as such...
There hasn't really been anything else to suggest a fixed external potential source. So if this one is proven wrong, they are out of options. Ignoring, of course, that it has already been proven wrong. But, that is the reason why they feel it hasn't. Because it's so very important to them that it is right.
And of course barring all that, even the most profoundly affected individuals with Autism rarely blame their condition for the lowered quality of life, if any, they blame their surroundings or surrounders incapability of adjusting to their needs. With proper surroundings and surrounders, even at it's worst, the downsides are manageable and the upsides can be really nice/useful.
I don’t think I’ve seen anyone on Lemmy make the distinction between Netanyahu and the people of Israel, so im not gonna name the distinction between you and Trump. And that’s just the more recent example. You guys treated all my people like the enemy when it was time to use us as the excuse for war. I got to suffer because of your country, and which of you supported it is irrelevant if that’s how we’re gonna look at it
You're watching the official music video for Devo -''Peek A Boo'' from the album 'Oh, No! It's Devo' (1982) Subscribe to the Rhino Channel! https://Rhino.lnk...
So, I did a thing - accidentally selected my 5TB external NTFS hard drive (encrypted with VeraCrypt) as the target for writing an ISO. The moment I noticed that "Impression" had switched the drive letter, I immediately killed the process. But yeah… damage done.
Now, the situation: - Currently shows up as: - 6 MB FAT - 4.3 GB - 2 TB unallocated - 2.6TB unallocated - The VeraCrypt volume obviously no longer mounts. - Drive was somewhat crucial - lots of structured data I’d really prefer to recover with the original file system intact.
I know chances are slim, especially with encrypted volumes, but has anyone had luck recovering from something like this? I’m open to commercial recovery tools or command-line wizardry. Would love to hear from anyone who’s been down this road.
I think you need to go commercial recovery. If it was a file you accidentally deleted, that can easily be recovered, but you wrote directly to the device.
If you have your encryption key backed up, you have a chance to decrypt it still. It's also possible, but unlikely, the key somehow survived the ISO write and it was written elsewhere on the drive, allowing the key to be recovered. I would only trust such with a professional. (There is basically a smaller encrypted section that your typed-in password decrypts, that section contains the encryption key the rest of the drive uses.)
Honestly though, if you have your stuff backed up (you do have your stuff backed up elsewhere?!?), just restore from your backup and call this a loss.
If you don't have a backup, this was your wakeup call. Always have a backup going forward.
Aren’t encryption keys, typically in the partition header? Wouldn’t that be one of the first things overwritten? Even if it was in the FAT or in the GUID, it would have been overwritten when a the ISO was written.
Each VeraCrypt volume contains an embedded backup header, located at the end of the volume (see above). The header backup is not a copy of the volume header because it is encrypted with a different header key derived using a different salt (see the section Header Key Derivation, Salt, and Iteration Count).
It may be possible to recover the encryption key. You might try asking on VeraCrypt forums/mailing lists or contacting a commercial data recovery service which understands VeraCrypt. Though I’m not familiar with VeraCrypt so I may be misunderstanding the cited documentation.
VeraCrypt is free open-source disk encryption software for Windows, Mac OS X and Linux. In case an attacker forces you to reveal the password, VeraCrypt provides plausible deniability.
Of course, OP should create an exact duplicate of the disk to another drive before making any changes to it.
As an aside, I know that GPT partition tables likewise come with a backup header at the end of the disk. Whether LUKS encrypted devices also have backup headers, I don't know, but it doesn't seem so. So, my fellow LUKS users, perhaps you would like to run the following:
VeraCrypt is free open-source disk encryption software for Windows, Mac OS X and Linux. In case an attacker forces you to reveal the password, VeraCrypt provides plausible deniability.
I guess it's a question of how much hassle it's worth. I did a messy data recovery of a crashed database for a work client once, but it involved a lot of trial and error and writing special purpose code, plus considerable luck that some things worked better than I had a right to expect. Cost of something like that would be in the multi kilobucks, maybe low 5 figures. We got almost all the data back, though not 100%.
Maybe just put that HDD aside and replace it with a new one, and deal slowly with recovering the data as you get the time to mess with it. Also don't do any write operations on the old drive. Maybe copy it entirely to someplace and work on the copy. In fact better do that anyway, HD's physically crash all the time.
Veracrypt has back-up headers located elsewhere in the volume that are unlikely to have been overwritten.
First thing's first I would strongly recommend copying the drive as it currently exists bit for bit to another drive of equal or larger size. Don't work on the original if you can help it.
Now with this copy, you should try to check the option to use the backup header when mounting and try again. If the partition is gone and veracrypt doesn't see it you'll need to try using something that recovers partitions and doesn't mind encrypted partitions or partitions or file system types it doesn't understand and use that to ON THE COPY recover and recreate the partition (this will write data and can cause the possibility of further loss or worsen your ability to recover which is why it is important to perform it on a copy). Testdesk may work for this but there are other options that probably are better.
See this list: old.reddit.com/r/datarecovery/… and choose something from there if this data is truly important. Again only work on a copy on another drive. Some of these software examples actually work against the original drive and make a copy elsewhere and should be safe to use on the original drive so long as they have you select a target drive to push the recovered data to but read the documentation. Testdisk absolutely must be used on a copy.
You will incur data loss and likely should run one of the file recovery software mentioned on the drive once successfully mounted in veracrypt to attempt to recover as much as possible.
I have a slightly different issue where I have several VeraCrypt vaults on an external that seem corrupted and don't recognize the correct passwords anymore. I'm making note of your advice to work on mine too. Is there anything particularly different you would recommend?
The only thing I would note is -IF- your volumes are not partition or disk based BUT -files- based there is the possibility that corruption of the host file system of the disk the files containing the volumes are on could result in pieces of those files being marked unreadable by the disk and it’s POSSIBLE one way to solve this would be a file system check utility.
HOWEVER such activities carry a -large- risk of data loss so I would advise a bit for bit copy of the disk and doing the repair on that so if it goes wrong you’re not worse off. -IF- you cannot make a copy then I would advise at least trying to mount using backup headers before doing that and copying off anything you can salvage as file system checks can really mess up data recovery and should only be used in certain circumstances.
You’re much better off trying the recovery software I linked in fact than doing a file system check as it will tend to have better results.
You can also use the option to mount as read only in VC to prevent writes to a suspected failing disk.
This case is due to a logical problem. Cleanrooms are only necessary for physical repairs, like swapping the Head Stack Assembly.
DriveSavers’ cost of entry for a successful recovery is about $2,000. They’ve even given that quote to an iPhone user who needed nothing more than a screen replacement.
Their “state of the art facility” is appropriate for hardware cases where money is no object and you need the best of the best to deliver results no matter the cost.
Realistically, most regular people will be well taken care of using a reasonably priced service like 300 Dollar Data Recovery.
Considering switching to Linux, but I have many questions.
Gaming - I enjoy gaming and want a Distro that will let me play most games. I have read that keeping nVidia drivers up to date can be (was?) a problem. I currently use steam for 99% of my gaming, I’m aware steam is porting a lot for SteamOS, but what are the limitations of this? Will I have to wait for a port before I can play a new game? Are there stability issues?
I’ve developed a lot of pretty basic macros for excel in Visual Basic, I’m not a programmer by any means, but I can write some algorithms to do QoL coding. Is making the switch to open office seamless? Will my .xlsx docs incur formatting issues? Will my macros translate to whatever editor is used in open office? Does open office use the same codes for cell functions? Are there statistic package add-ons like with excel? Essentially, I’m asking how much work is ahead of me if I make this switch?
I do enjoy the old version of outlook and work with many people who use outlook calendars for scheduling. Is there a similar program that will work with the same functionality on their end? (E.g. a mail client that will allow me to accept calendar invites from others and confirm it on both ends?).
I am familiar with Visual Studio and use it as my IDE for very basic programming (I like to tinker with automating certain tasks in games, again by no means a programmer). Is there an equivalent FOSS version that would have a low learning curve coming from Microsoft’s IDE?
Steam has a compatibility layer called Proton, when enabled you can play games designed to run on Windows. You can check ProtonDB to see if a game runs or you can just check by yourself.
Games that use anticheat are the most prone to not work on Linux.
Also, you don't have to move to Linux cold turkey. You can try dual boot and adapt your workflow at your own pace. GL 🙂
I can tell you macros in Excel will more than likely not transfer. As for formatting, 50/50 depending on how in-depth it is. I would advise dual booting/vm for Excel. There just is no other program as powerful. I'm not saying Libre or others can't do what your looking to do, but more than likely would need a rebuild to get there.
Agree for Excel. An alternative can be to use winapps which allow to run excel via docker (or podman) and open windows app same as if there were natively installed.
Gaming on Linux is great, steam isn't porting games for SteamOS, instead they released Proton which allows you to play just about every Windows game without issue.
I don't know about LibreOffice supporting Excel Macros, I'd assume not.
There are many good mail programs, but I think only one that properly integrates with Microsoft's cloud stuff.
Visual Studio straight up runs on Linux, it should be familiar.
Try it out and see if you get your system how you want it 😀
Gaming - I enjoy gaming and want a Distro that will let me play most games. I have read that keeping nVidia drivers up to date can be (was?) a problem. I currently use steam for 99% of my gaming, I’m aware steam is porting a lot for SteamOS, but what are the limitations of this? Will I have to wait for a port before I can play a new game? Are there stability issues?
For gaming you should keep in mind that you want a distro with decently new packages to avoid issues with Nvidia & also to have the correct drivers for some titles: fedora is good for a strong base, although I heard they are doing away with there x86 libraries... I prefer endeavor os, but you will at very least need to learn to use pacman and yay, but they aren't hard to understand if you have basic programming experience. You should also know that almost all games that are not supported on Linux nowadays are either really new, like launch day new, or they rely on an invasive anti cheat: are we anti cheat yet & proton db should give you a decent idea if your library is compatible.
I’ve developed a lot of pretty basic macros for excel in Visual Basic, I’m not a programmer by any means, but I can write some algorithms to do QoL coding. Is making the switch to open office seamless? Will my .xlsx docs incur formatting issues? Will my macros translate to whatever editor is used in open office? Does open office use the same codes for cell functions? Are there statistic package add-ons like with excel? Essentially, I’m asking how much work is ahead of me if I make this switch?
I don't have nearly enough experience with your second point, my only thoughts are that you should be looking into libre office - it's the most mature in my eyes, and open office has made a lot of questionable decisions recently. Also as a general rule, I would say there is about an equivalent amount of compatibility between the oss alternatives and the different versions of the Ms office suite, it will be noticeable, but so long as you don't live and die by formatting, it will just be mildly inconvenient.
I do enjoy the old version of outlook and work with many people who use outlook calendars for scheduling. Is there a similar program that will work with the same functionality on their end? (E.g. a mail client that will allow me to accept calendar invites from others and confirm it on both ends?).
I believe you are looking for proton, they are the oss answer to the Ms and Google suites, I don't know if you will have quite the amount of compatibility you want between people, but if that's important just use the web versions of your preferred suite.
I am familiar with Visual Studio and use it as my IDE for very basic programming (I like to tinker with automating certain tasks in games, again by no means a programmer). Is there an equivalent FOSS version that would have a low learning curve coming from Microsoft’s IDE?
Vs code is almost entirely open source, as such, there is a project called vs codium which takes the publicly available vs code source code and keeps it fully open source, if you like the visual studio program you will hardly notice a difference.
The thing with Office is Microsoft has worked hard to keep it's monopoly. Office is it's cash cow and so they avoid standards deliberately to make it harder to move off. There are plenty of alternatives, lots of email software, etc. It's just about taking your time and moving bit by bit. You can install LibreOffice and Mozilla Thunderbird on Windows to try them out. LibreOffice being what replaced open office.
Protondb - info about current state and playability of almost any game on Steam driven by community.
AFAIK many calendar apps use CalDAV protocol which is quite universal. So basically any compatible with CavDAV protocol app (Thunderbird, Evolution) will work just fine.
VS Code + some extensions - yes, I know that it is not an IDE. I use it for game development on Unity (C#) and it makes job done.
I would say, instead of trying to 100% switch over, instead dip a toe in. Dual boot, or run a seperate system as linux first. Slowly grow into it, and then if in a few years, it feels feasible, put it on as your main and have your windows system as the back up. Then maybe eventually you won't need/want a back up at some point.
I can speak to a few of your questions. I've been fully on Linux, both my laptop and gaming PC for two years now.
Gaming - I use Steam for all of my games, and have had few issues. Steam uses Proton to allow non-native games to run, and it happens all within the Steam client. New Proton versions update within Steam just like your games. I've run across a few games that wouldn't launch or would CTD, but those are few and far between and similar to my experience in Windows.
Sample of games I've played without issue: * Star Wars Jedi: Survivor * Horizon: Forbidden West * Helldivers 2 * Red Dead Redemption 2 * Dwarf Fortress * Kingdom Come Deliverance 2 * Fallout: New Vegas * Deep Rock Galactic * Sea of Stars * Factorio
I have an Nvidia 3080Ti and use the proprietary Nvidia drivers. From what I recall, the install was painless and I haven't had driver issues.
OpenOffice - I use LibreOffice, because to my understanding it is actively maintained unlike OpenOffice, and I haven't had any issues casually using it to view documents.
I use Thunderbird for my mail client and haven't had any issues setting it up or using basic functionality. It works just as well as it did under Windows.
I installed VS Code or one of the foss alternatives, can't remember which, and haven't had issues with it.
TL;DR that's really my experience with everything in Linux. Some things are a learning curve, but most stuff just works. I'm also not a tinkerer. I just wanted an OS that works and stays out of my way and Linux has been great for that.
Gaming on Linux is nearly effortless within the Steam ecosystem. Outside if that, it requires a little more technical proficiency and a willingness or excitement for learning. Lutris, Heroic, and Bottles are all tools that can help you run non-Steam Windows software on Linux. Your mileage WILL vary depending on what you want to run. Non-games are very hit-and-miss.
Use LibreOffice, not OpenOffice. Formulas should work natively, but macros may need to be reimplemented since LibreOffice Calc uses a different “Basic” than Excel.
That depends on what you mean by “Outlook”. I’d wager most Linux users automatically pick Thunderbird, which is a fairly basic mail client compared to the MS Office version of Outlook. It is comparable to the lightweight built-in Windows Outlook, though. I prefer Evolution as my mail client, which is closer to Apple Mail or Windows Outlook. Try some things out and see what you like.
VSCode and VSCodium are readily available FOSS editors. There is also Kate, which comes with many KDE-based distros. Jetbrains IDEs work very well on Linux, whether you use free community, free non-commercial, or paid versions.
Gaming - go to protondb.com and look for the games you at regularly. If something g you at isn't supported (mostly specific online multiplayer games) then you're out of luck. Most games work seamlessly.
Watch some YouTube videos about people showing how to install Nvidia drivers to get an idea of how complicated it is.
I do enjoy the old version of outlook and work with many people who use outlook calendars for scheduling. Is there a similar program that will work with the same functionality on their end? (E.g. a mail client that will allow me to accept calendar invites from others and confirm it on both ends?).
I believe Thunderbird is still the most widely supported local mail client. (Corrections welcome, but last time I used a non-webmail email client, it seemed the most popular.) I have found Thunderbird is more stable and reliable on Linux than on Windows or Mac. And thunderbird seems to intentionally mimic older versions of outlook.
For any non-mircrosoft email provider, Thunderbird seems to usually be what the mail provider tests with, if they support non-web email access.
If using Microsoft as your email provider, I think Microsoft occasionally sabotages Thunderbird intentionally. I have not had a good experience, with this combination.
But Outlook(.com) works fine and is fully featured, in a browser on any version of Linux.
I am familiar with Visual Studio and use it as my IDE for very basic programming (I like to tinker with automating certain tasks in games, again by no means a programmer). Is there an equivalent FOSS version that would have a low learning curve coming from Microsoft’s IDE?
VSCode is the heir-apparent to Visual Studio.
It is FOSS (mostly). To get the pure FOSS version, look for VSCodium, instead. Both run natively on Linux, were destined to mimic Visual Studio, but applying some usability lessons learned.
In my opinion, the feature set is equivalent, except some cases VSCode/VSCodium is dramatically better.
I used to run Visual Studio and VSCodium side by side, but I haven't been tempted to open Visual Studio in several years.
Lots of folks mentioning VSCode as the alternate to VS, but it is very much not that. VS is an IDE, VSCode is a text editor that just has a big plugin community. Do not expect a low learning curve. The VS alternative that's an actual IDE, and does have a low learning curve, is JetBrains Rider. Unfortunately it is neither F nor OSS.
On the machine I used Nvidia on, I ran Linux Mint and used that distro's driver manager. It was fairly straightforward. I found an appropriate time to build a new machine and I'm now a Ryzen/Radeon kind of guy.
In broad strokes, what Valve has done for Linux gaming is build a compatibility layer that translates the game's calls for Windows systems into those that Linux can understand, especially translating DirectX API calls to Vulkan. So, for the most part, Windows games now "just run." You do not need to wait for a game to be ported to Linux, and in fact many just simply aren't anymore; Valve's instructions are to target Windows and let Proton handle Linux gamers. The one place you'll find issues are some games that use kernel level anti-cheat, a technology that can work on Linux, but many studios choose not to let it.
I don't know if a conversion to a FOSS office suite (I would recommend LibreOffice or possibly OnlyOffice) will be 100% seamless, the most trouble I had with LibreOffice was collaborating with others. An MLA formatted essay made in LOWriter may translate fine, powerpoint presentations and spreadsheets might be a little wonky.
The cool thing about FOSS apps is you don't have to have Linux to give them a try. You can install LibreOffice in Windows and try it out yourself.
I don't think VisualStudio is available for Linux; their text editor VSCode and a "we built the parts they opened" called VSCodium are.
Linux is an extremely programmer friendly environment; you'll find a lot of IDEs available. Your typical Linux distro ships with Python and Perl interpreters among others just built right in, along with GCC of course. I've messed around with the Godot game engine, along with Arduino, though these days if I'm going to do much programming I'm going to do it in Python, including for microcontrollers. These days I've somewhat standardized on ESP32s running MicroPython.
OpenOffice has seen essentially no development since 2011, when the trademark got transferred to Oracle after they bought Sun Microsystems.
The project got forked into LibreOffice to dodge the trademark issue, but it's the same devs, practically the same project, but now under a non-profit organization. Well, and with 14 more years of development.
So, use LibreOffice instead of OpenOffice. It will most likely come pre-installed on whichever Linux distro you go with. But you can also try it out on Windows beforehand, if you have concerns.
Just a headsup incase you try it on windows 11 before you do on linux:
LibreOffice, out of the box, is slow and buggy sometimes on windows 11 and the user interface doesn't look as smooth as on linux. You might have to tweak some graphics settings to bearable.
LibreOffice looks and works significantly better on Linux.
Ive personally not encountered any of the issues listed above for Libreoffice on Windows, it runs just as well on my win10 system as it does my Linux system (dual boot). That said, I have yet to try it out on Win11 amd if I do, it will be virtualized vs running on bare metal.
To me it looks you are pretty deep in MS ecosystem. The easiest to switch to Linux are developers because development on Windows sucks and casual users because they depend only on their web browser. Since you are both a gamer and deep in MS office suite it will be very hard because its completley different ecosystem.
My proposal: recreate your environment in VM and switch on linux host with that same setup. And then try get step by step over a year outside of that VM.
That randomly reminds me of a random post I saw on that other site years ago, goes something like this...
'Get 4 pigs, and paint them with numbers 1, 2, 3, and 5. Then let them loose in Walmart, and after they catch those 4, sit back and watch them look for #4...'
I miss working the pit. No customer interaction, I knew what filter and where as the car rolled in, and it was smooth. I do not miss the little burns, and being covered in oil and sweat, and the occasional smashed hand from the diff plate bolt suddenly coming loose.
Teaches a bunch of subjects and helps develop problem-solving skills; its soundtrack has zero right to be so bitchin' but it is
Was asking about this today because I couldnt remember the name or franchise and Lemmy came thru, reuniting me with yet another thing I could remember sound of but not the content or name, long thought lost to the sands of time
While not talked about as much as the Intel CPU security mitigations, Intel graphics security mitigations have added up over time that if disabling Intel graphics security mitigations for their GPU compute stack for OpenCL and Level Zero can yield a …
My garden has 3 core functions. Recreation and play, Growing vegetables and fruits, and givin nature more room. The so called Controlled Wildernes. I Love to see all the different species the are coming by. But i always want to make it better, especially the combination of space for family and nature. Ive got inspired by the book The Garden Jungle from Dave Goulson. It just gave me more ideas and motivation to protect the smal animals, and make the garden usefull for more. But what about you? What books, articles, documentary etc, did inspire or would give me some ideas to let nature have more space in af garden?
I wouldn't say any book, but the news. Our planet is failing quickly, with no concerted effort to stop it. My zone has had massive collapses in insect and wildlife year over year, and I aim to help combat that as much as possible by planting native plants, providing extra fruit and vegetables for the wildlife (I keep a decoy garden for them), and doing it all as resource conscious as possible. Nothing but good things can come from having even a few native flowering plants around for bees and hummingbirds, and going a bit of an extra mile to compost to keep the good insects that contribute to that process happy and expanding their colonies.
I grew up with smoker parents. That shit is so rank, and I grew up when smokers were extremely blasé about secondhand smoke - every room was always smoke-filled when smokers were in it, and obviously it's OK to smoke in a car with children if you open one window.
My wife and my 10th anniversary is coming up this year. She quit smoking before we got married. Years later I told her how proud I was of her quitting because it would have been a requirement of mine before saying our vows.
5 years ago she started smoking again when her father died of COVID. I was patient with her in the beginning but I have become increasingly frustrated with her unwillingness to quit. We have been looking forward to a 10th anniversary vow renewal but I told her I won't do it unless she quits. I told her I wouldn't have married a smoker. I will not remarry her while she is a smoker.
Unless you’re going about it like an asshole, no. You’re communicating, standing by your position, and setting a boundary.
She knows smoking is dangerous, she knows you don’t like it, she knows you want her to quit, she’s quit before so she knows how to do it.
Have you considered compromising with vapes? Still not as good for you as not smoking at all, but significantly healthier than smoking and doesn’t make everything smell horrific. She can get that nicotine buzz she craves with very few of the downsides. She can also then taper her nicotine content and quit that way if she decides to.
I'm trying not to to be an asshole about it. She knows my stance and I'm not budging. That said, I don't throw it in her face. In fact, I only told her once that I won't do the vow renewal until she quits. We have an otherwise perfect marriage.
We haven't had the vape conversation, but I'm not in favor of that either. You don't quit drinking by switching from beer to vodka. I honestly don't know how I would feel about her switching to vape. I hate the smell of her addiction but that's not my biggest issue. I hate the effect on her health but that's not the complete picture either. I hate the concept of a smoking addiction. It's not my identity, and I don't want it to be the identity of us as a couple. We are blue collar AF, but I still feel like her smoking diminishes us.
I used to be proud of her for quitting and staying quit. Now I'm not anymore.
That identity thing seems counterproductive. The way addictions works, you generally kind of stay addicted indefinitely even if you manage to quit and stay off the substance forever. And in contrast to beer vs. vodka, vapes are healthier than cigarettes - even if that doesn't actually change anything for you, it's definitely better for her.
Kringel-Kultur ist einfach nur Diskriminierung von Leuten die etwas "anders" sind (oder einfach nur "nicht männlich"), im etwas weniger deutlich reaktionärem Gewand.
Hättest du das gleiche geschrieben, wenn es ein Junge mit einer Fußballverein-Party gewesen wäre?
Cannabis use prevalence is actually kind of low in the Netherlands, many european countries where it's illegal have higher prevalences. Turns out, legalizing cannabis doesn't turn everyone into a stoner.
This video I'll talk about how Microsoft tried to steal a developers project by promising to help him, but then forking his work and changing his projects li...
This came out a while ago. The developer used a license that said, "Steal this software, I don't care." Then he was shocked Pikachu when it was stolen.
Stolen? It was forked as is allowed by the MIT license. With GPL as well there is no „you cannot fork” rule, you can do exactly the same thing. The author misunderstood that „you have to push the changes to upstream”, which is not in any of those licenses.
While I'm usually all for Free software (as opposed to open-source software),
His problem is the exact reason GPL was created.
Nah, his problem is that Microsoft has much billions of dollars and so doesn't give a fuck about any licenses on projects by small developers. They simply ignored even the terms of the MIT license (which required MS to keep the original copyright notice, which they didn't). GPL would've done squat here since it also allows for forking (by design), but also because the US legal system is cooked, and people don't have many rights left when it comes to a dispute with a corpo.
I was going to mention DOS, but I looked it up in the hopes of not sounding like an idiot and it turns out the history is more complicated than I knew.
This is clickbait. tl;dr a guy released MIT-licensed software, Microsoft forked and renamed it as they're legally allowed to do. Hell they could even close the source and sell it if they wanted to.
Forked it, renamed it, and changed nothing but the license on it.
What's stopping it from becoming the defacto version putting the original into the point where it's no longer worth maintaining, then Microsoft pulls it and sells it as a subscription service?
Nothing, because the author explicitly chose to allow this kind of behavior. Paraphrasing one of the Youtube comments on the video: the author picked a cuck license and then got cucked, what a shock!
It's funny how apropos cuck really is here. We all recognize that a woman (Microsoft) cheating on her husband (the guy in question) is a bad thing, but we no longer view it that way when we learn that the man consented, video taped, and gets off to it. If you really want to stop this kind of thing, simply choose a better license like the GPL that forbids this behavior.
As with a lot of 90s software, it’s a bit more complicated than which source code did they download (or, rather, mail order on floppy… because it was the 90s). Not the least of which is due to the fact that many of the projects don’t exist anymore and there weren’t that many copies to begin with.
However, they both embrace and extend LDAP and Kerberos among other open and not open projects of the time. Both choices were related to the results of the Protocol Wars and Microsoft’s attempts, in the 90s, to do to the Internet what Google is doing today.
Ist halt bei den meisten Parteien wirklich nur LARP, d.h. sie machen größtenteils nur Lippenbekenntnisse. Gerade SPD und FDP (also die Teile, die nicht ständig wie AfD-Politiker reden) sind da oft ziemlich unglaubwürdig.
Just out of idle curiosity. I went to music school and teach at a local music shop, so I'm very familiar with music theory but I'm aware that my experience is most likely not the norm.
If you are familiar with any theory (even just scales and keys), where did you pick it up? Lots of the resources I've seen both in and outside of formal education can be both confusing, and it's often hard to see the application of what you learn in the short term.
I know some basics from learning electric bass, but don't ask me about chords (beyond major and minor) or chord progressions. I'm definitely aware that this is a huge blindspot even for electronic music.
When I was previously on windows I had a lot of fun doing music production. My workflow took place in FL studio and used a lot of software synthesizers (VST files mainly).
After my switch to Linux, I am 95% better off. Everything is great except I have to rediscover a music workflow.
It's quite painful because I had licenses to some very expensive software synth libraries (The Arturia V collection for example). I have done some reading and have found that while it is possible to get FL studio working in Linux, it still doesn't have the greatest of results.
As far as that goes, I am not terribly concerned - Reaper, Bitwig, and other Linux DAW's exist and I am fine using those instead even if it means purchasing a license for the paid ones.
But the real problem is the software centers/Licenses/installations for my software synths. It would be such a shame and a waste of money if I couldn't get these working, but I don't know much about dealing with this on Linux, so I am appealing to your collective knowledge.
I wanted to ask if anyone has successfully installed the Arturia V collection on Linux for use in a DAW, and if so, what you think I should know about it. I thought I read somewhere about some software these could be emulated/installed through (not wine), but I'm just really open to hearing about recommended options for something like this if anyone knows.
Otherwise, I wanted to ask my musical Linux friends here what they have for VST's and what their workflow is on Linux, because it's always fun to develop new work flows.
As others mentioned in this thread, yabridge running in a native Linux DAW is a great setup. I personally use Reaper with yabridge, Serum, and a few other vsts here and there.
For others who are more knowledgeable than me: is there any reason (engineering-wise) why these plugins are made for Windows? Are there not cross platform and open source frameworks that let you compile audio plugins for Windows + Mac + Linux with minimal effort?
I genuinely don't know anything about audio programming, I'm just curious.
I'm pretty sure clap is completely cross platform, which is pretty cool. But the infamous VST is unfortunately not; you need to create separate Linux and Windows VSTs 🙁
Welcome and congrats on your migration under GNU/Linux.
VST is a proprietary format therefore it is made to not work on linux. On linux synth or virtual instruments are LV2 plugins (like Helm, Surge or Vitalium) or SF2/SFZ soundbank (played with Sfizz or Fluid Synth).
Now Ardour, Bitwig and Reaper can load VST plugins, but : - Some won't just work, - Some will work pretty much the same (Kontakt seems to be working for some person, but it depends on the version I think), BUT if the VSTs needs to be installed before hand (like Kontakt, Spitfire, SINE and I think Arturia V falls into that), you will have to install them first using Wine (or with a wine front-end, like Bottles, Heroic, Lutris). Then load them in your DAW, if they don't work there after being properly download and installed, I don't think there is anything much to do... ... Apart from try using a bridge (like Lin-VST or Yabridge), but here against results are still very unpredictable. I got some pretty good results with both on the past, but on my new setup none would work for my plugins (Spitfires mostly).
These companies won't make their plugins available under Linux cause 'there isn't enough people using it on linux' (words of someone at Spitfire who I was asking the question).
My workflow for production in a few words : - One PC (recording, mixing, mastering) with a midi keyboard, - One PC virtual instruments only, I use it when project requires lot of instrument tracks.
Edit : Yeah Carla can be used as well, it can load VST plugins and act like a plugin library (pretty much like Kontakt).
I am kinda confused as to why certain Linux distros are mentioned in in every others post while others seems to get litten attention or are being bashed at worst. People advertise for Mint because it's so easy to use, while I personally miss it's benefits over Ubuntu.
Personally I used KDE Neo for some time and switched to Fedora 42 a few weeks ago. It has all the same tools as basically every other distros. What is missed is not necessary or available. I can also seamlessly manage my proxmox server through ssh and fish and take up minor programming tasks on python or arduino.
Am I missing something important, or just seeing a loud minority with very specific requir?
Why are there so many different types of bread at the store? Or mustard, ketchup, milk...etc.
It's mostly personal preference and reputation. Ubuntu has a shit reputation right now because of some poor decision making, and Fedora has a solid reputation and doesn't cause problems.
It feels weird to just jump into a generic Linux community and ask a question. It's nice being so small - kinda like the internet used to be.
Anyway, I've been running Linux servers for decades but only recently switched my desktop. I first tried Debian 12 and I'm now on OpenSUSE Tumbleweed - I switched in the hope of getting newer drivers and maybe fixing this issue.
I have a HP laptop with onboard Intel graphics and an external monitor connected with USB-C. In general it works great - until it doesn't. From time to time the external monitor does not wake up after a suspend. Normally turning the monitor off and back on will cause some sort of driver reset and it comes back. Once or twice this has not helped and I've had to reboot.
I'm running Xorg as Wayland on Tumbleweed won't start on t his machine. Wayland may have worked with Debian, I don't recall. I don't think it's worth listing details of my versions as it's happened on two distros and through a couple of minor updates to Xorg on openSUSE. It happens with KDE or LXDE.
1) If you use the same USB port for this all the time, disable power saving on that port 2) Make sure this isn't a PD port (this is a laptop design annoyance) 3) Make sure your monitor's own power saving settings aren't the issue by disabling things like "deep sleep" or similar
Another thing to try is download Fedora LiveUSB and test it with that (it will be Wayland). If it works, then you know it's a config issue with your distro.
1) If you use the same USB port for this all the time, disable power saving on that port
I use the same port all the time. I want power saving on the port. I like to just get up from my PC and have it go to sleep by itself and wake back up when I come and jiggle the mouse. It's working exactly as I would like maybe 90% of the time. Just sometimes the external monitor doesn't wake up.
2) Make sure this isn't a PD port (this is a laptop design annoyance)
It is a PD port, and it is powering the laptop. I'm not sure why this would be a problem? It's worked fine for 5-6 years with Windows and works 90% of the time now with Linux.
3) Make sure your monitor's own power saving settings aren't the issue by disabling things like "deep sleep" or similar
Again, I'm not sure how this could be a problem for the scenario I describe. The settings work fine 90% of the time. It's not even time related: sometimes I can come to it first thing in the morning, after it's been asleep all night, and it wakes perfectly; sometimes I can get up to go get a glass of water and come back and the external monitor won't wake up. It seems totally random.
1) Power saving features may not fire on changing from sleep states. This happens on Windows as well, but the power management system in Windows disables power saving features of the port when a display is detected. In Linux you want this off for the same reasons. It doesn't prevent the machine from sleeping. 2) On waking, PD ports can cause issues with negotiation of the signal reset and changemode for displays. 3) Monitors communicate their power status over USB-C, so when your machine wakes up, it may try to fire an event that says "wake up" to the monitor, but if the monitor isn't in a state where it's expected a signal (deep sleep), then it won't wake up.
Any one of these could be the issue, but if you don't want to take steps to debug it, then just unplugging and replugging the cable will kick the monitor back up.
Does it work if you unplug and replug? If you hit a button other than power does it wake up, or does it say "no signal" or something? Does the laptop see it? Anything in any log? Can you force a redetection from the laptop?
If you hit a button other than power does it wake up, or does it say "no signal" or something?
Yes.
Does the laptop see it?
I'm assuming not as it does not display on it. Next time it happens I'll see what xrandr says.
Anything in any log?
Nothing in Xorg.0.log and nothing that seems related in the journal. I'll keep journalctl --follow running and see if anything that I didn't pick as being related comes up next time it happens.
you're running way too old a distro for what you want. debian 12 has its merits as a server, you install it and leave it be and it just works.
what you want - fluidity with power management, dock/undock, etc - although achievable with tweaking this and that isn't being worked on, not on X, not on debian 12, so it's not like those things will eventually get there. so you need a semi-modern distro, like ubuntu or fedora or even trixie.
wayland isn't new, it's default on a lot of distros since 2021 or so, so you can be sure that your use case was previosly met and solved. costs you nothing to boot e.g. F42 off a USB and try it out (has to be 42 as earlier live sessions default to X11). if you have lots of RAM, add the rd.live.ram switch so it copies the image to RAM and everything is super-snappy for testing and it doesn't touch your SSD.
Total user error on my part.... I've managed to delete all the categories on my eggplant home page. This is stopping me from seeing my watch lists. I still have the edit layout button but there are no options for categories to edit. Any help would be appreciated.
I have a subsonic instance running but I rarely listen to Albums. Stuff I really like are DJ performances like by the channel The Moment.
So I thought: why not download and self-host them before Google makes Youtube sign-in only, (like Elon and Facebook did).
That stuff is probably quite hard to organize. But the type of music simply breaks the common services, like Jellyfin, or Subsonic.
I know of funkwhale. But I'd like to keep the contents private. I just wanna listen to music at work (so being open to the web is a plus). I thought funkwhale is a bit too... "social" for me. I'm a (re)uploader, not creator.
You got any ideas? Maybe a youtube-cloner with audio-only support? (I know how to download videos already)
Edit: Of course, I'd download the sets legally, e.g. from their patreon discord, or whatever. ;)
Also: I know that restricting it to my VPN would be ideal for security and legality reasons. But that's a bit inconvenient. And I want to check my options.
Do you need a web player? I’ve got several years of a radio show on my web server and wrote a script that created an RSS feed for them. This way I can open that in any podcast player (even web based ones) to listen to it.
Doesn’t get any more secure than a battle-tested web server hosting simple MP3 files and a text file.
Convenience might be a thing, though. I’m in the Apple ecosystem so their Podcasts app shows that feed on all devices and tracks listening progress, etc.
If I didn’t have that, I’m still a lifetime customer with PocketCasts and PocketCasts Web. So, that’s that. But if you don’t have anything similar in place, a self-hosted streaming server might be the best way to go, yes.
the international avoirdupois pound, [...] is legally* defined as exactly 0.45359237 kilograms
So, technically, a pound is a metric weight, only a niche one whose use may or may not be permitted by local regulations.
Similar is true* of the inch, which is defined as precisely 25.4 millimetres.
* The US, UK and a handful of others collectively signed this into their respective laws in 1959. You might think we don't use the pound in the UK any more but it still shows up often in informal situations. Ditto inches and feet.
That's similar to saying "Auf Wiedersehen" translated to English is "until I see you again", therefore "Auf Wiedersehen" is technically English. Just because there's a recognised translation to a thing, that doesn't make it that thing.
If we're going to split hairs then while it's defined in terms of metric units, it doesn't scale with prefixes and factors of 10, so it can't be an S.I. unit.
I’ve been noticing this more and more in the modlogs, with it proven via the “creator” option in some instances’ modlogs that the people doing the bans were mods and not admins, and when I first joined Lemmy, one of the things that were held as a universal truth was that this absolutely could not happen.
It might be possible with 3rd party moderation tools. Just using the web interface, you can only do mod actions from a post in your community. Like, I can't ban someone from FoodPorn from a post they made in, say, PoliticalMemes. I don't have any mod options when viewing communities I am not a moderator for on my app (Connect) or the web interface for Lemmy. World or Pawb.Social, but I have seen a few mentions of more robust mod tools in other apps.
A lot of churches/temples are membership-based. You can probably still attend sermons and the like in most cases if you're not a member, but they won't let you have a wedding, baptize your baby etc. in their temple.
I want to build an app, in which you can subscribe or follow profiles or feeds from multiple platforms, including various fediverse platforms (lemmy, Mastodon, Friendica, etc), blogs, and others (no idea what else yet).
App will have optional smart filtering and sorting, and optional algorithm based on your reading habits.
The north star goal is to make this app give the user the feel of being officially supported by the platforms it reads from. It should feel like a lemmy app if you see a lemmy post, feel like Mastodon if it's Mastodon, etc. This is obviously a monumental effort, so I will have to make concessions (hence north star).
Motivation
I see the recession of multi-source or Multi-Platform feed readers (RSS) as quite unfortunate to user choice and freedom.
I think this app, will promote a few ideals of mine: - being intentional about content we want on our feed - breaking boundary between different platforms (which is the spirit of ActivityPub) - promoting open platforms: encourage non-profitting creators to make their content accessible on these platforms, and readers to read from them. - consuming internet content without data mining, addictive scrolling, and having the choice to smart filter or sort your feed.
What are your thoughts? Do you agree that this is worthwhile?
Besides blog posts (RSS), lemmy, Mastodon, and other big fsdiverse platforms, what would you want to see on this app?
I do, I've been music for a while about an app that had all my fediverse accounts in one place, a long with my email and possibly reddit (but, uh, without ads). I never check my email unless I'm expecting something and I think a big part of why is because it's a separate flow from checking my other text-based social media.
To have an aggregation tool that could seamlessly put together such different environments would awesome, but the scope can be a bit too overarching at first. My suggestion, having seen the progress of another aggregation platform (mainly for video/audio), Grayjay, is to proceed slowly at creating integrations, as effort to maintain them is potentially exponential, and then, when you feel comfortable managing the ones you already made, proceed to the next.
And unrelated, but is RSS truly shrinking? I found out about it some 1~2 years ago, and unless it's due to me using this type of technology for so little time, but it feels far more are made or keep existing than there are feeds being killed. Worse part for finding the feeds is that often they are hidden in the page's source code.
Would love to see a project like this take hold that is floss and community supported. Both Surf and Tapestry are interesting in this area but sadly proprietary.
The north star goal is to make this app give the user the feel of being officially supported by the platforms it reads from
This is the exact opposite of what I'm working on. My idea is to embrace "Protocols, not platforms" and treat all the different places are sources of content (like RSS) but with the added two-way interactivity that is enabled by ActivityPub and Linked Data.
So of course the UI will need to adapt: threaded discussion forums would be presented in a different way in relation to long form blog feeds. But luckily this is already part of the benefits from Linked Data. A Lemmy post is presented in the Fediverse as https://www.w3.org/ns/activitystreams#Page, and each response is a https://www.w3.org/ns/activitystreams#note, while a blog entry from WriteFreely is a https://www.w3.org/ns/activitystreams#Article and an video from PeerTube is a https://www.w3.org/ns/activitystreams#Video... this information about the object type should be enough for us to figure out the best way to handle the UI.
what would you want to see on this app?
Believe it or not, I would like to have a read-only view of the Big Tech feeds. Instagram, TikTok, YouTube, Reddit, Twitter, Facebook posts from your friends, all of that crap. Like what GrayJay is doing. The idea though would be not to interact with it, but to have a way to people to ease their way out into the open alternatives.
I am probably missing something here, doesn't Friendica fulfill those requirements in and of itself? On mobile I use Fedilab (android) to get to Friendica.
This article is a response to Tim Chambers' recent writeup, titled The Seven Deadly UX Sins of the Fediverse Web Experience (To Fix). It's a pretty great read, and I'm writing this not as a rebuttal, but to analyze and expand on the points made.
This is a musing on 7 problems that have been pointed out, with some ideas on what progress has been made to fix them.
Thank you! I've been thinking about it a lot, and I think it could be used to solve a bunch of different problems, like importing stuff from other networks, and having everything ready to go before you join an instance.
There's some UX questions that have to be figured out, the last thing I want is some super-cluttered design that asks for a million different options. Also, platforms would need to provide some necessary APIs (for registration and data import) to make it fully useable.
I agree with Tilley that many of Chambers's complaints seem Mastodon-specific, or at least not applicable to the threadiverse.
The only really big disagreement in philosophy I have is the complaint about direct messages not being private messages. We've all seen the way that private messages have been used to harass users on reddit. That direct messages don't include an expectation of privacy on lemmy is, to me, a strength rather than a weakness; something that advantages the recipient over the sender, which is the balance of power we want.
I did not use Twitter before. So I am not using Mastadon now. Because I don't give a ploop. I liked forums. Lemmy-ish...adjacent spaces are like forums. I like that. I wasn't aware that DMs are not private, so strange. But yes, many people have been harassed. When I was on Reddit, I turned off any means of communication not public. Here, I wouldn't to be honest.
My main critique is just that, within the Mastodon side of the Fediverse, the design is highly misleading about what the feature does. It resembles a normal DM feature, but the message addressing is purely handled by mentions in the message body.
Basically, it's an antipattern, causing people to accidentally mention other people in what's assumed to be a Direct Message. It's less about privacy, more about poor telegraphing of side-effects.
I think it can very well be applied to the Threadiverse.
Sin #1: The First-Move Problem - Doesn't really applies for the Threadiverse, because the instances (at least for me) do feel genuinely different, with a different culture, etc., which is one of the most exciting things for me here
Sin #2: Navigation Inconsistency - Basically the same here.
Sin #3: Remote Interaction Hell - Also the same here, right?
Sin #4: Private Mentions Aren't Really DM's - Same here, right?
Sin #5: The Phantom Social Graph - There definitely are synchronization issues on Lemmy, too (see the australian instance, which, I think has a latency of a week of so per post 😁). Otherwise because the Threadiverse is still rather small, it seems to work mostly fine.
Sin #6: The Discovery Problem - Much better on Lemmy. The algorithms are both transparent and make the threadiverse feel alive even though it has much less user.
Sin #7: Basically doesn't apply here, because you don't follow users, but can be applied for communities. And multiple of the same communities on different instances are a big problem of the Threadiverse. Also abandoned communities. PyFed solves this with topics and Lemmy also has an upcoming feature for this in v1.0 I think.
I think the most pressing issue is sin#7 if applied to communities.
In an abstract sense, I see the Threadiverse as inversion of Mastodon: instead of posting messages to a personal account, which tags may be interesting to you to discover other similar content, in the Threadiverse, users post to hashtags and who posted them is only secondary important to you, but may be used to discover more content by the same account.
I used to feel that way, but there's so much crap on that timeline, especially when you're on a bigger instance. I used to use it for the exact same thing, discovery. A lot of it is just noise to me now, though.
More like the Sean Tilley’s dream custom frontend wish.
I thought he would talk about text to speech, alternate text, auto describer, voice chat, etc.. Instead I read what Sean wants his interactions with SNS to look like. I want even custom profile music+radios! Here’s how my lemmy profile is supposed to !
Well, no, this was just responding to a critique on UX shortcomings, and highlighting how different efforts could solve various problems.
It sounds more like you're talking about one of my previous blog posts, where I was talking about a super-flexible frontend that's basically a pagebuilder. Make no mistake, I would love to see custom profile music and radios! And I agree that accessibility needs to be way better!
This article is a follow-up to an older post of mine, Towards a Greater Federated Architecture, and also a response from the wonderfully-thought out piece by Ben Werdmuller, If I Started Fresh. The goal here is to take the lessons learned from a variety of systems to propose the Fediverse platform I have always wanted to build: Postmodern.
No code has been written as of yet, but I am learning to program, from the bottom up, backend to frontend. I have some background in game design, Web development, and API clients, but I'm working on the more elusive foundational stuff. This is the only way I can possibly develop the confidence needed to build this thing.
The Fediverse, Social Web, Peopleverse, whatever you want to call it, has evolved considerably since it originally started back in 2008. During my entire time on the network, I've longed to design a platform of my own. I've learned a lot of lessons from amazing projects along the way: Hubzilla, Bonfire, Emissary, and ActivityPods have all done some really interesting things beyond what Mastodon offers to the network. I also think there's some really valuable ideas in both Nostr and Bluesky that are worth closer examination.
Before I dive into my technical brain-droppings of the past decade, let's establish a few core concepts.
Guiding Principles
1. It needs to be fun
On the surface, this might sound superfluous. What does it mean for a platform to be fun? This boils down to a few key areas that Fediverse platforms struggle with:
Ease of use - Good UX design is hard to execute well. As time goes on, I'm convinced that people want to use something without having to think too hard about conventions or side effects. They shouldn't have to dig under countless menus to find where the decentralization is.
Discovery - For the time being, the act of finding new, cool things to interact with or peruse is pretty bad. There's some promising work happening with Fediverse Discovery Providers. Regardless, discovery needs to also extend beyond simply finding stuff, and include a laser focus on finding people. Onboarding still kind of sucks, and there's a number of issues with trying to find your friends and connect with them.
Resiliency - One of the shakiest aspects of the Fediverse involves just how fragile instances can be. If an instance permanently goes down, and you didn't already have some alias set up to migrate your followers, you're dead in the water. Having to rebuild your social graph from scratch is the opposite of fun.
Control - This can mean a lot of different things: control over your timeline, control over how your space on the web looks, control over your connections, control over your data. A big missed opportunity in the space is that we'll say things like "you own your own data", but it's not exactly true. Your data mostly exists as a series of tables in a database, which can be serialized into a JSON export that you mostly can't use with anything.
It might seem like this is a catch-all, where you can throw any old thing into the guiding principle. Maybe it is. What I know is this: if the experience is bad for users, if they're getting harassed and seeing drama every day, if they don't really have much control over the platform, if they can't find their friends or cool things that interest them, then your platform is the opposite of fun.
2. Users should have maximum agency
Building on top of Principle #1, individual users should have total agency of how their experience is shaped online. This can be categorized in four ways:
Visual / Conventional - the user decides what interfaces, themes, apps, and clients they will leverage to access the network. Custom designs and behaviors empower users to make their online space truly their own.
Data Sovereignty - the user has strict controls over their data: what apps and services can use it, the extent to which different pieces are exposed to the Web, and the ability to seamlessly port the sum of that data from one place to another.
Filtering and Connectivity - users should always be given the opportunity to decide what they see on their feeds, and what other people can see from them. This could take the form of filtering out keywords, blocking users and domains, leveraging a third-party labeling service, or being able to connect to individual accounts that may otherwise be banned instance-wide for everyone else.
Of course, this isn't to say that admins and moderators don't have a suitable place in community-building and curation. It's just that solely relying on them tends to result in communities where users have minimal input on policy, and admins have absolute authority. To me, this is a major barrier towards world-wide adoption of the Social Web, which is a goal for some of us in this massive, sprawling movement.
3. The platform must move the Fediverse forward
There's some absolutely amazing developments happening in the space. Most notably, the Fediverse Enhancement Proposals project has helped many different platforms standardize on undocumented behavior. It's the closest thing we have right now for improving ActivityPub implementations, in lieu of a formal update to the protocol spec.
FEPs are the reason why groups mostly just work across a variety of systems now, and related efforts such as the Threadiverse Working Group allows NodeBB, Discourse, Lemmy, PieFed, and Mbin to federate together with minimal issues. It's not perfect, but the project is bearing a lot of fruit.
The problem is that some of the biggest projects in the space, such as Mastodon, have historically been pretty indifferent to these efforts. Often, they choose to forgo established agreed-upon FEPs to do their own thing, forcing everyone else to bend over backwards and support their unique way of doing things. At the end of the day, FEPs still aren't advancements in the ActivityPub protocol itself.
We need more Fediverse platforms to champion these collaborative efforts, both to help influence further development of the protocol as well as putting pressure on larger projects to work with the community.
4.) The experience must be unique
This might come across as wildly conceited, but I don't want to build yet another clone of a service that already exists. I mean no disrespect towards the people doing that, but I think we've barely managed to scratch the surface of what can be built. There's a certain appeal in imitating existing familiar designs and paradigms, and iterating on them to be better.
What I want to do is develop new concepts that aren't quite like anything else. Sure, there may be a passing resemblance to half a dozen different things, but I want to develop something bold. I'm tired of describing the Fediverse as "the alternative" and want so badly to instead describe it as "the future", but we have to take much bigger risks to get there.
Implementation Details
Here are some of the pipe-dream ideas I've been refining over the years. There are probably a lot of aspects that still need key considerations, some of which is still above my ability to program! I'm currently going to school for Computer Science, and practicing to make my coding skills more capable of tackling these big ideas.
Composable Interfaces
This is probably the biggest idea behind Postmodern, the platform I hope to one day abuild. What are Composable Interfaces? To keep it simple: composable interfaces are a way to construct a custom frontend with whatever data is available.
Composable interfaces are not necessarily new; prior art exists in the following Fediverse projects:
Hubzilla - You can write pages, a custom theme, and widgets using an elaborate template system. You have to write it yourself by hand, there's not really a way to preview these changes, and some of the more high-level customization has to be done by making calls to pieces of code that aren't super well-documented.
Bonfire - Customization is largely accomplished through modules, which can be bundled together into a sort of unique software distribution. So, you can choose to add a group forum module, a wiki module, and a video module, and Bonfire will snap those pieces together for you. Super interesting, kind of complicated, still yet to be battle-tested for communities.
Emissary- Really wild template system built on HTMX and HyperScript. Emissary is really different from other projects because it allows developers to dictate data schemas and actions from within the view template. A lot of contemporary developers might balk at this, because it kind of violates the MVC design pattern. However, Emissary is crazy flexible, and makes it possible for a developer to add support for custom Activity types and actions with a single template.
Dokieli - a full-blown decentralized client-side editing tool. It implements ActivityPub, Linked Data, and a swath of other technologies related to Solid. It's extremely powerful, but the interface looks like it has a significant learning curve. It's hard even for me, a Fediverse nerd with 15 years of experience, to fully grok.
Looking at these concepts, I think Emissary and Dokieli come the closest to what I want to build. The ability to build a custom UI with unique capabilities just by dictating what the template is doing is awfully compelling.
My personal head-cannon differs in one specific way: take Dokieli, and marry its capabilities with that of Emissary. Focus on the page-building, widget-building, stream-building elements, and give people the power to delve into a vast pool of social data that they can edit client-side without having to touch any template code themselves. Don't worry, this ugly thing is just a mockup. There's a lot to figure out. Instead of taking inspiration from page-building tools like Gutenberg, Elementor, or Wix, my thoughts are to instead take inspiration from layer-based image editors. Each layer in the builder/inspector thing is a component, which can be altered, rearranged, and adjusted in a number of different ways. You can mix and match existing components, or compose your own from scratch by reaching into the pool of data that your account is aware of. It's not unlike the WordPress approach to Blocks in 2025...but, hopefully this approach can be more intuitive. Again, this is just conceptual. A whole lot of things need refinement. For this to be viable, a lot of work would need to be done to overcome any potential learning curve. The tools need to be accessible, with the page layout exactly matching what the user sees on the screen.The experience could really suck if it's not implemented carefully. After all, we have to follow the first guiding principle: it has to be fun. Fighting with an editing tool is not that. I wanted to draw more widget ideas, but I need to finish writing this. To accomplish this, the most straightforward approach would be to create a core set of widgets with data types and settings, bundled together for different experiences. I'm calling these bundles-of-things complications, which can be thought of as the snapping together of atomic units to make something greater. An experience that has a lot of complications put together would pretty much work as its own frontend made of stylized, curated pieces. If this sounds way, way complicated: yeah, I know. For a social client frontend, this idea pushes a lot of boundaries. I have some ideas about how to get there (maybe use GraphQL for the builder?), but a lot of it is going to probably diverge from the standard Web application stack. I have a lot of homework to do.
Next-Gen Permissions System
I've written about this a bit before in my last article about moving the Fediverse forward, but we need to get our act together about permissions systems. Mastodon's offering is woefully lacking when it comes to granularity. Sigh. ActivityPub has these nifty things called Collections, which is really just a representation of a collection of objects. You can pretty much put any object in there, so in a roundabout way, you can create a scoped list of people you're connected with. Theoretically, you could use collections of people as privacy scopes, dictating who can see certain things, or certain versions of things.
Projects such as Bonfire have taken the logical next step, where it's possible to establish boundaries and barriers for different collections of people, under a variety of conditions. This can apply to everything from individual posts to group communities to whatever else you can come up with.
I think it's absolutely important that we build a system that not only accounts for message delivery and access, but capabilities as well. You the user should be the one that dictates whether people can see a post, boost it, reply to it, whatever. In a decentralized system, this is kind of hard to figure out, but not impossible.
Some people will disagree with me here, but I think a document database architecture might be the way to go for this whole thing. A traditional relational database might be too limiting for this kind of insane flexibility, especially when you consider how different platforms try to account for the complex data structures necessary for ActivityPub.
Pleroma, for example, historically used the jsonb data type in PostgreSQL to hold reams and reams of nested JSON data. At a small scale, it's not so bad, but ActivityPub data can grow exponentially when you're interacting with lots of people and content.
For some time now, I've been thinking a lot about Sir Tim Berners-Lee's Solid Project. When first approaching Solid, it seems super abstract and complicated. You get all these people talking about RDF, TripleStores, Quads, WebID, and a lot of other stuff. As someone that has a pretty firm grasp on Fediverse systems, Solid initially caused a vein to bulge in my temple. I went on to explain the semantics here. A file manager, representing files in a Solid Pod TL;DR: Solid is kind of a specification for data, data storage, and access. It allows users to store their data in pods, and that data is represented as different kinds of documents and metadata. There is no relational database. Instead, the data in your Solid pod is used as a database itself. If you wanted to migrate all of the posts you've ever made, Solid makes it super easy to pick all that stuff up and move it somewhere else. An ActivityPods instance. All of these applications access the same pool of data. ActivityPods manages to marry the two concepts, and does the heavy lifting to translate these documents and data into something ActivityPub implementations can understand, and vice versa. The real magic here is that ActivityPods makes the act of building ActivityPub apps relatively seamless and straightforward. Developers don't have to think about both ActivityPub and Solid. They just need to write an ActivityPub app. Mastopod, an ActivityPub social app that uses Solid. I still have some outstanding questions about whether ActivityPods can effectively scale up. The Solid community in general is pretty small, and ActivityPods is an even smaller subset of either Solid or ActivityPub communities. A large-scale community instance with over 100,000 users (who all individually have their own pods) doesn't feel that feasible to me.
Still, I respect everything these guys are doing, and I think about building on top of ActivityPods pretty often.
Relay-Based Supportive Infra
Fediverse instances suffer somewhat from a fragile network. In fact, I would go as far as stating that tethering user accounts to Fediverse instances is an antipattern. We've mistakenly followed this trend for a long time, and put the sum of a user's entire social graph into one server. If that server goes down for good, you're toast. A Nostr client's network settings, showing many different relays. Nostr doesn't have this problem, because it doesn't have instances. Instead, user accounts are free-floating, peer-to-peer identities that dispatch posts to individual relays. Instead of individual instances where everybody logs on to post, everything is done through clients. Your identity is basically a public key, tied to a profile and some posts.
What I'm advocating for isn't necessarily the prioritization of one method over the other, but a hybrid approach that includes the best of both. What if Fediverse identities could be free-floating, separate things from instances, that persist even when an instance goes down?
Suppose that the Move activity in ActivityPub was just a method for detaching the identity from one instance, and attaching to another? Or, taking the approach that Hubzilla takes, suppose that you could mirror your identity to multiple instances by attaching your identity to multiple servers? You post in one place, it shows up somewhere else, too.
Another way that relays could be useful is in attacking the notorious Discovery Problem so prevalent in the Fediverse. As Nostr has continued to evolve, different relays have emerged that specialize in specific things:
Caching
Hosting Media
Search
Premium Long-Term Storage
Theoretically, it could also be possible for relays to take on the role of Fediverse Discovery Providers. These things could not only act as an index of content and people, but conduits that pull in news, book reviews, events, and maybe even a contact directory. Maybe your instance could just subscribe to relays, rather than trying to broker message dispatching and pulling in new content itself.
A Single-Identity Ecosystem
Finally, we get to what I consider to be the Achilles heel of today's Fediverse. As highlighted in previous sections, I think we do a terrible job of handling identity. In fact, we don't really do any job at all. Sigh Part of the problem here is that every Fediverse server in the network is a full-blown platform, rather than a client. The decision of the Mastodon project was to forgo the Client-To-Server part of the ActivityPub spec, instead opting for a bespoke API of its own. Mastodon's API grew so popular that many other Fediverse platforms adopted it, just to have access to a vast amount of compatible apps.
The primary side effect of every Fediverse server being a platform instead of a client is that every platform needs its own account to be used. This quickly leads to a nightmare scenario where it's possible to have 15 different accounts floating around that don't actually connect to each other in any meaningful way. Reimagining various platforms as client frontends instead, using the same profile. Granted, the Client-To-Server API has its fair share of complaints. It's under-documented, clients are expected to handle all logic on the client side, and seemingly nobody uses it anyway. However...it still exists, can be improved upon, and could be used in conjunction with ActivityPods.
I'm greatly interested in the prospect of building ActivityPods apps that work with Postmodern, where you're really just viewing different crafted experiences in specific clients.
In Conclusion
Congratulations on getting to the end of my big, weird rant about how I'd do things. Some of these ideas remain unproven, and may not actually be the solutions I end up going with. Still, much of this exists as the byproduct of lessons learned from observing different Fediverse platforms evolve over time. I hope to start by building small prototypes to test out various ideas.
Some of this (all of it?) might be super convoluted and complicated. The biggest thing I want to focus on, however, is the experience of building composable interfaces. I think this idea really has legs, and could potentially be a radically different approach to building for the Social Web.
If you have any insights, ideas, suggestions, or critiques, please feel free to reach out! This article was, believe it or not, something of a shortlist. There's a lot of things I didn't discuss (Bluesky-styled labelers, custom feeds, etc) that still belong in this vision somewhere. For now, these are simply the topics most resonant to me, that I wanted to pay special attention to.
German has the cool feature of just cramming a bunch of words together to make a new word. That's about the only thing I know about it as someone who's just interested in language as a concept.
For people interested in language who speak English, I will recommend this book, which kinda blew my mind explaining why my native tongue is so stupid for good reasons:
Well, English prefers genitive constructions, and rarely compounds more than two words, so native English speakers have trouble to parse words like Kindercarnavalsoptochtvoorbereidingswerkzaamhedencomitéleden, Speciallægepraksisplanlægningsstabiliseringsperiode or Rindfleischetikettierungsüberwachungsaufgabenübertragungsgesetz, despite compounding being a core feature of Germanic languages, not only German. English just cought a severe case of French back in 1066..-
I hope you're aware that words like Rindfleischetikettierungsüberwachungsaufgabenübertragungsgesetz aren't exactly easy to understand for Germans, either. If there's one thing English is usually really good at, it's dumbing things down to a level that's easy to understand for the reader; some scientific texts are genuinely easier to understand in the English translation than in the German original, even if you're a native German speaker with a relevant university degree.
Technically Schyzerdütsch is High German (you could even say it's the Highest German, considering elevation), while what most Germans call 'Hochdeutsch' is actually standard german (which, to be fair, is mostly derived from High and Middle German dialects, as opposed to Low German (and Middle German is much more similar to High German than to Low German)).
I'm running EndeavourOS with KDE on a Lenovo with an Intel CPU and integrated GPU.
I was attempting to update my system today but kept getting the error referenced in this newsletter that I found after looking for the error online. I ran each command in the newsletter exactly as written and then rebooted my system.
After rebooting, I'm able to successfully get to the login screen and input my username/password but, instead of my desktop, logging in takes me to a command interface for about a second before reverting to the same login screen. The line in the title is the last entry shown in that command interface.
I've looked online for solutions but it doesn't seem like anyone with my same error is getting stuck on the login screen (most people seem to be stuck on Grub and are able to use e, ctrl+alt-F2, etc) and I'm just sorta lost on what to do at this point.
Any help is appreciated. Thanks!
Edit: Thank you to MyNameIsRichard for your help. It turns out that I needed to install plasma-x11-session as I am still an x11 user and a recent update made it necessary to install this package manually.
The problem is probably unrelated to the firmware, and caused by some other upgrade.
After experiencing the issue, you should be able to switch to a different tty with ctrl-alt-f6 (or any other f key), log in, and check journalctl -b for an error message. Edit: Use the End key or shift-G to scroll to the end of the journal.
Successfully made it to a different tty with ctrl-alt-F5 and was able to run journalctl -b
I'm not entirely sure what error I'm looking for here in particular so I'm taking a guess that "Activation request for 'org.freedesktop.XYZ' failed: The systemd unit 'dbus-org.freedesktop.XYZ.service' could not be found." is the one I'm looking for (XYZ because there are a few of these such errors with just the XYZ changing between them).
I was hoping you had f-6 which was causing all sorts of problems for amd and intel users but you have f-9 which purports to fix them all. The next question is are you using Plasma with X11? If you are, the have a look at archlinux.org/news/plasma-640-…
I am indeed using X11. I tried using Wayland ~a few months ago (on one or both of my setups, wish I could remember) and it did not work very nicely for me so I just stuck with X11, which so far has worked perfectly for what I do.
He must have been going to a party, he had catan, he had uno, and he had Scrabble way up at the top. His stack wasn't balanced very well though, and Scrabble fell, the box burst open, spilling tiles everywhere.
So I went up to him and asked, "what's the word on the street?"
Today I can share a major development status update of XPipe, a connection hub that allows you to access your entire server infrastructure from your local desktop. It can make your life easier when working with any kind of servers by eliminating all the commonly tedious tasks that come up when interacting with remote systems, either from the terminal or from a graphical interface. XPipe comes with integrations for SSH, docker and other containers, various hypervisors, and more without requiring setup on your remote systems. You can also keep using your favourite text/code editors, terminals, password managers, shells, command-line tools, and more with it.
Docker compose
This release introduces support for docker compose. Containers in compose projects are grouped together and can be managed all at the same time via compose project entries.
The container state information shown is also improved, always showing the container state in combination with the system information.
Batch mode
There is now a batch mode available that allows you to select multiple systems via checkboxes and perform actions for the entire batch. This can include starting/stopping, automatically adding available subconnections, or running scripts on all selected systems.
You can toggle the batch mode in the top left corner.
Password managers
The password manager integrations have been upgraded: - There is now support for KeePassXC - All password manager integrations have been reworked to work out of the box without configuration - There is now support to use password manager SSH agents more easily - You can now unlock the xpipe vault with your password manager
SSH
Various improvements were made to the SSH implementation: - The SSH gateway implementation has been reworked so that you can now use local SSH keys and other identities for connections with gateways - The VSCode SSH remote integration has been reworked to allow more connections it to be opened in vscode. It now supports essentially all simple SSH connections, custom SSH connections, SSH config connections, and VM SSH connections. This support includes gateways - There is now built-in support to refresh an SSO openpubkey with the opkssh tool when needed - There is now the option to enable verbose ssh output to diagnose connection issues better - For VMs, you can now choose to not use the hypervisor host as SSH gateway and instead directly connect to the VM IP
Other
Connection names, e.g. VM names, will now automatically update on refresh when they were changed
You can now launch custom scripts within XPipe with a command output dialog window without having to open a terminal
Various installation types like the linux apt/rpm repository and homebrew installations now support automatic updates as well
The k8s integration will now automatically add all namespaces for the current context when searching for connections
The application window will now hide any unnecessary sidebars when being resized to a small width. This makes it much easier to use XPipe in a tiling window arrangement
The webtop has been updated to have terminal multiplexers, proper konsole tab support, disabled kwallet, and more
Various error messages and connection creation dialogs now contain a help link to the documentation sections
A note on the open-source model
Since it has come up a few times, in addition to the note in the git repository, I would like to clarify that XPipe is not fully FOSS software. The core that you can find on GitHub is Apache 2.0 licensed, but the distribution you download ships with closed-source extensions. There's also a licensing system in place with limitations on what kind of systems you can connect to in the community edition as I am trying to make a living out of this. I understand that this is a deal-breaker for some, so I wanted to give a heads-up.
Outlook
If this project sounds interesting to you, you can check it out on GitHub, visit the Website, or check out the Docs for more information.
Giving it a quick scan, it does look interesting. I am not sure whether I will try it as I don't see the need to visualise beyond what I can do with a shell and the openstack dashboard, but there can definitely be use cases for it.
Not being FOSS is the deal-breaker though. Not sure if I am too much of a sceptic but I prefer open source when having software that accesses my private key/servers.
I think if you have a specialized tools with openstack, XPipe probably can't compete with that in that area. But it can make your life easier in a lot of other areas and common tasks when it comes to accessing many servers.
About the FOSS requirement, I know that this is a dealbreaker for some. That is a tradeoff when going the commercial route
Yes, it is absolutely valid that you decided to commercialise your project and keeping parts or all of the code closed. As I work in the public sector and we are encouraged to use open source and write open source software, my knowledge regarding closed software solutions is thin. Is there a "standard way" how closed software is able to guarantee private key safety? I could imagine solutions where there is a separate handler that is open source so that one can verify that only specific information is passed into the closed software area, but this doesn't sound feasible when talking about full terminal support within the closed software.
Again, there is nothing wrong with going commercial! I am sure I will release closed software (side projects), too, at some point.
I think in the end you still have to exercise some trust. There are things like audits, but these are costly and not an option in the current stage. Maybe in the future. Best I can do is to provide transparency by open-sourcing large parts of the codebase and providing detailed security information like docs.xpipe.io/reference/securi…
As someone who sometimes sells to the german public sector, it is true that they would prefer a good open source solution if it was available. But me being a german vendor makes up for it, as they still prefer this a lot more over any US-based vendors.
In general about the key handling, XPipe doesn't read any kind of keys itself, it only forwards them to the local OpenSSH client. It is essentially a wrapper around in existing ssh client, and doesn't implement anything related to key handling itself.
Due to its nature, XPipe has to handle a lot of sensitive data. This can range from passwords for all kinds of servers, to SSH keys, and more. Therefore, the security model of XPipe plays a crucial role.
Are there any plans to make a Flatpak version of this? I've moved to an immutable OS and none of the options you have will install. Flatpaks are their preferred method. I know I could self host my own version which may be what I may end up doing anyway, but I'd prefer to have it more local yet another docker container. 😀
Nope, an application like this can't work as a flatpak as the sandbox prevents almost all shell functionality and makes the application unusable. Yes, the AppImages are basically the best solution for immutable operating systems.
The point is the Linux Kernel is covering the same security mitigations which make the CPU level ones redundant. If all users are using the Linux Kernel, why would it be an issue?
Depends on how you use your system if you have multiple users. CPU mitigations wont protect GPU workloads, and vice versa. If your CPU was mitigating GPU workloads, that would probably be a massive performance loss.
The vulnerability is all on the CPU side. The GPU workloads being referenced are only vulnerable on the CPU instruction set used to pass workloads to the GPU.
Talking about CPU and GPU workloads as entirely separate in this context is misleading as the vulnerability is with CPU code execution that passes tasks to the GPU.
The GPU is not vulnerable to this particular attack, only the CPU is.
As you can see here impacted hardware is all CPU side, you can also read about how the proposed attacks work.
Forgive me. Just trying to understand. How does the kernel flag NEO_DISABLE_MITIGATIONS have any affect on the CPU? Seems to be targeted towards OpenCL and Level Zero, which are APIs to access GPU hardware directly.
One thing Ubuntu users should know is that the change will only provide performance boosts when GPUs are handling workloads running the OpenCL framework or the OneAPI Level Zerointerface. That likely means that people using games and similar apps will see no benefit.
OpenCL™ (Open Computing Language) is an open, royalty-free standard for cross-platform, parallel
programming of diverse accelerators found in supercomputers, cloud servers, personal computers,
mobile devices an…
I am all in favor of this. There are beer flights at so many restaurants but tiny strong & delicious cocktails with small foods would be such a great starter to a meal. Something bitter but not enough to get drunk and not be able to enjoy the food.
When I am working up a recipe, often I will invite people over and make 4 different versions but then split each drink into 4 little dixie cups so that each of us have only one drink's worth of alcohol. That doesn't fix the drink getting too warm problem but does let us test them clear headed.
Using downsized recipes is pretty standard for me when I'm drinking at home. For a lot of cocktails, half-size or third-size is just fine, especially when you start experimenting with ingredients and ratios. And I have something of an issue with actually committing to a full-size drink (i.e. I often get bored of it halfway through).
However, one of the biggest barriers to entry is the need for smaller glassware, which, while not impossible to source, is limited in its variety. “Where I see a lot of room for improvement is tiny rocks and tiny Highball glasses,” Zielinski says, noting that miniature coupes or diminutive Martini glasses are more readily available.
This is definitely an issue. I've been using stemmed liqueur glasses for small Martini-style cocktails, but even in somewhat smaller rocks glasses a half-sized Old Fashioned-style drink just looks lost.
I've finally started having some free time lately and have been working through my Steam library, most of which is Windows games I'm playing with Proton.
I wanted to install some mods, and wanted a mod manager for this. Nexus Mods has Vortex, which is not available for Linux. In any case, running Windows games on Linux through Proton on Steam is fairly specific; the game files will be at certain locations on a Linux filesystem, not at the same locations as they would be on a Windows filesystem. So I think I would need software that has specifically been designed for this use-case (Windows games from Steam running on Proton).
Are there any such mod managers out there? What do other people do when playing games on Linux? I can't be the only person who wants to play video games with mods.
It should be a thing! Linux has lots of games now. Linux has lots of games with mods. Linux needs mod managers! Voice your want for it here, discuss, and best: contribute to the open source code for Vortex! :3 Link to the development forum where ther…
Oh amazing. Seems like it's still in early development and only supports Stardew and Cyberpunk but I look forward to it being more mature and supporting more games.
I used vortex it works pretty for windows games there no difference for mod manager where to work cause it think that it windows and files hierarch in windows prefix as is it expect vortex .So simply just install vortex in same wine prefix where u had installed before and that's it.
TLDR: ModOrganizer 2 works well under Linux (native) with Steam, and does not require any install scripts, Lutris, or otherwise. This process can also fix broken installs from scripts that went awry,
Protontricks can help for some games. Personally I used it to install Openplanet for Trackmania which doesn't have any sort of explicit Linux support specified.
What Protontricks does is allow you to run installation files within the context of a steam game, as you mentioned. Simply launch Protontricks and select the game you're trying to modify and it will mount it properly for you. Then choose "Run an arbitrary executable (.exe/.msi/.msu)" and proceed to run the installer as you would normally.
Sometimes the path can still be a bit janky. For example when Openplanet wanted to install to the Trackmania directory as mounted through Protontricks, I had to specify: Z:\home\.steam\steam\steamapps\common\Trackmania.
I'm not sure why one of those is flagged. From what I can see its just the obnoxiously written write_file.content one-liners and lots of regex/sed, but nothing looks wrong with what its doing.
For Bethesda (and other compatible games), ModOrganizer 2 via SteamTinkerLaunch has worked reasonably well for me. There’s some jank involved but nothing terribly complicated for anyone who’s already used to Linux gaming hoop jumping. STL also supports Vortex but I’ve never personally tried it.
<br />To add in about game modding on Linux:
https://github.com/limo-app/limo
https://flathub.org/apps/io.github.limo_app.limo
Limo is a universal mod manager that is linux native.
And I do mean universal. It’ll work with literally any game, you just have to take a bit of extra time to configure things for games that do not yet have a supported preset configuration out of the box… but at this point, that includes most games that are generally reliant on some kind of mod manager type program on Windows, to keep track of 10s or 100s of simultaneous mods.
It works very much along the same lines as something like Mod Organizer 2, though there are some differences, read the wiki.
It sets up a virtual file system that allows mods to be set up outside of the main game directory itself, and will override them such that the mods actually load, but they can be ‘undeployed’ to revert back to vanilla, you can set up different profiles of different mod configurations and deploy/undeploy what you like.
It can also manage load orders, supports formats such as fomod and similar for games like Fallout New Vegas and Skyrim, you can set up tags and category groupings, and it also shows you conflicts between mods down to the specific files, showing you a chain of overwrites to the final file from the final loaded mod.
It doesn’t support things like LOOT, which purport to autogenerate correct load orders… but frankly, thats fine, because shit like that doesn’t even work properly in situations you’d use it in on Windows 90% of the time.
EDIT: Wow, apparently it does support LOOT now, it did not a few updates ago.
…
I have successfully gotten FONV working using Limo to set up uh… there’s a variant of the Viva New Vegas mod setup guide aimed at Steam Deck users, but it tells you to set up Mod Organizer 2 on the Deck… which you can do, but its rather input laggy and there are other inconveniences…
Here it is, Mirelurked Viva New Vegas:
https://ashtonqlb.github.io/mirelurked-vnv/intro.html
I had to alter a few steps from this to get it working with Limo, but they were basically just… set up Limo instead of MO2, and you have to handle NVSE a bit differently, because it literally replaces/overrides the entire main game exe.
…
I have also used Limo to mod Cyberpunk 2077, works with more in depth frameworks like CET, RedExt, etc, as well as using the Decky Framegen plugin to insert FSR 3.1 Upscaling and Framegen into CP77, which gives better quality and fps than the official FSR 2 and 3 implementations that come with the vanilla game and are vanilla supported on a Deck.
You basically just have to launch the vanilla game via the normal launcher first, check the ‘enable mods’ switch, fully load the game…
Then you can set up the Framegen mod, which adds a custom command in steam to the launch parameters… and then you can also setup the ‘skip intro’ mod, which is reliant on both the mod being present, as well as additional command line parameters…
There are a bunch of reddit posts complaining that the FrameGen mod doesn’t allow other additional launch arguments, but they are wrong.
All you have to do is append those additional launch args … at the end of the FrameGen mod’s launch arg. This just doesn’t seem to be explicitly documented anywhere, by anyone… I may have been the first person to figure this out?
Anyway, after that bit of silliness, setting up other mods for CP 77 using Limo is fairly straightforward.
…
… I am doing all this on Bazzite on a Deck, but you could do it on… presumably any linux distro that supports flatpaks and proton (the translation layer that allows Windows games to run on Linux).
There will always be a few ‘weird’ mods that are just totally reliant on a whole bunch of Windows specific things to work, or just cannot be made to work without actually overwriting some core game files in the main, real directory itself…
And, some of these mods will require a windows component dependency, like vc_2017 or vc_2022, you set those up with something like ProtonTricks or SteamTinkerLaunch to modify the proton config per game, instead of trying to install the exe system wide as 99% of the windows oriented mods will tell you to do…
But so far, I have found either my own solutions for these cases, or someone else already has, or someone has just made basically a linux compatible equivalent for such a windows reliant mod.
… You can also just choose to run MO2 on Linux, it will work, its just… buggy, and overlycomplicated, imo, you’ve got to set up a custom wineprefix for the MO2 UI to not do dumbshit, give it thr dependencies it needs, and then you’ve got to do this for each different game you want to mod with MO2.
I found that Limo is sufficiently capable and much less hassle to use once you take the time to understand its differences from MO2.
I’m not super-familiar with mod managers in general but my experience has been that they just work with proton more than you might expect. I know for sure that unity mod manager works fine in proton; I use it for railroader.
I use Limo, it takes some getting used to after using Mod Organizer 2 for so long but it gets the job done. I havent used it for any huge modlists yet though as it tends to be a little buggy/unintuitive sometimes.
There's also a way to get MO2 on linux, should he on github as modorganizer2-linux-installer.
It's using OverlayFs to lay mods on top of the game files which allows for easy switch-arounds of mod sets while keeping each mod separated in their own folder. It's based upon config files and allows to freely collect mods in sets, even nested.
It's probably full of unnoticed bugs because I'm the only one using it, but it works 🤷 I do have a bunch of convenience stuff queued up locally though. They need a bit of polishing but soon it's ready for another push.
I tested in these games - ls -1 "$XDG_CONFIG_HOME/mod-manager": * Bloodstained: Ritual of the Night.toml * Cyberpunk 2077.toml * FlatOut 2.toml * Gotham Knights.toml * Grand Theft Auto: San Andreas.toml * Ready Or Not.toml * Stellar Blade.toml * The Witcher 3.toml
very niche but i think it deserves a mention: the Outer Wilds mod manager doesn't just support Linux natively, but it even has a CLI version, and it's up on AUR and Flatpak
as others have said though, r2modman/thunderstore manager also runs in an appimage and works perfectly well for games it supports, and MO2 and Vortex work more or less alright if they're in the same prefix as your game or potentially even if they aren't.
It's not ready yet (preview state) but NexusMods is developing an app for managing all their mods: github.com/Nexus-Mods/NexusMod… for Linux they're releasing both an appimage and a standard setup.
I am using r2modman most of the time and it works well for the modded games I play on my machine. I uses Thunderstore so it might not have the biggest library of mods for all your titles but it's worth mentioning imo.
I suggest Prisim Launcher for Minecraft, but if you also play other games and want mods I can recommend r2modmanPlus they have a appimage and platform specific builds that you can download and its opensource!
I haven't done it a lot, but running a Windows mod manager in the same prefix as the game should work where there isn't a Linux native version available.
I've not really tinkered with any kind of settings and just use Steam's default which is to have a separate C: drive for every Proton game, so does that mean I'd need a separate install of a mod manager for every game? Ideally I'd like to have just one mod manager that recognises all my games (that are supported by the mod manager at least)
Depending on the game and comfort with bash scripting you can roll your own mod managers. I don’t really play Minecraft anymore, but if I did it would be heavily modded. In an effort to avoid installing a client/launcher beyond the one I already use I just keep folders for mod lists and configs, and then have bash scripts with aliases to do all the necessary file moving to swap between mod packs.
This doesn’t really work for most other games, but for things that run natively on Linux can usually do the trick.
For things running through proton it’s a bit more involved, but I also found a lot of satisfaction in figuring out how to manually install mods within the proton prefix. Used to have to do that a lot to mod Skyrim when it first came out and I got it running through wine on a school issued MacBook.
github.com/sonic2kk/steamtinke… for when you need MO2 or Nexus (that isn't Stardew). Keep in mind this will install a new instance of the app for each game you use it with (in its proton prefix folder).
github.com/Nexus-Mods/NexusMod… is the current version of the new Nexus Mod Manager App, which has linux support. Currently it only has game support for Stardew Valley.
As many others have said, go with PrismLauncher for Minecraft. Modrinth's launcher works fine too, but doesn't have curseforge support.
Cue up your ad blocker, a short and easy to implement list from J Morgenthaler - make sure your recipe doesn't suck, use stronger ingredients, and ice ice baby, keep cold drinks really cold.
Let’s be honest, there are a million versions of every cocktail out there online these days, and most of them are fairly terrible.
That sounds more like a matter of taste and making sure that you actually have the same ingredients (or knowing how to adjust if you don't) as the person who made the recipe.
CachyOS looks really good, and I want to try it. But what's the effect of being sponsored by cloudflare? Is it FOSS? Does it collect data? What's Cloudflare getting out of the sponsorship?
They're fighting against AI scrapers, are objectively one of the best CDN providers and they offer a quite decent DNS resolver service. I wouldn't call them trash.
A paramilitary is a military that is not a part of a country's official or legitimate armed forces.[1] The Oxford English Dictionary traces the use of the term "paramilitary" as far back as 1934.[2]
In addition to the Fedora Engineering and Steering Committee (FESCo) having to decide on whether i686 support should end for Fedora Linux (including multilib), another contentious proposal is on replacing the X.
While that's true, but the main issue here is the unavailability of frequent security patches that Fedora now appears to be attempting to solve with X11Libre.
From what I understand, xorg has fundamental security flaws. How will they remedy this?
They won't. Don't download random shit and if you're worried, run it in Flatpak
What happens when the Linux kernel drops support for xorg? Do they intend to fork an older version of the kernel in order to keep support?
Not really possible, since X11 is only built on top of the kernel's graphical interface (same as Wayland). Even if that wasn't the case, the kernel doesn't delete any code that anybody uses (that's why 30 year old programs still run)
Yeah, I love to see people being called "racist" over not liking corporate facades, or "neo nazi" over referencing a clown. Always very productive.
There's a simple solution to this: if Red Hat doesn't like the guy or his code, don't fucking use it. They're the ones who banned him from Xorg and reverted his changes.
Actually, why do I expect a corpo to be morally or ideologically consistent? Silly me...
Considering the overwhelmingly negative feedback, I am hereby withdrawing this Change proposal. The reasoning is twofold: I have always argued that Changes that are overwhelmingly rejected by the community should not be approved by FESCo.
For the sake of all of our sanity, I'd really appreciate if FESCo could decide on this one really quickly (e.g. putting out a statement) and avoid what could be a most unpleasant flame-fest on this mailing list.
Hi, so I will try to hopefully explain as best as I can.
These are my devices:
Windows PC -> Cable Headphone1 output
Linux Laptop -> BT Headphone2 output
Android Phone -> Phone speaker output
What I want to achieve:
Have audio from all devices output from Headphone1 on my PC without having to use physical or software mixer.
What I managed to get working but sux due to audio stutter or delay:
Have audio from all devices output from Headphone2
How?
Phone paired via BT to Windows PC, using app on Windows PC called Bluetooth Audio Receiver gives me the ability to listen to my phone audio via Headphone1 (does not work for Laptop)
Linux Laptop paired to my Windows PC as an audio device allows me to set the Laptop as a output audio device for the PC so I can listen to PC and thus to the Phone via Headphone2
BUT, this causes phone audio to stutter via Headphone2 and audio from PC has at least 500ms delay.
Wish there was a way to forward audio from Linux Laptop to Windows PC the same way as from Android Phone to PC.
With ffmpeg in windows, you can listen to a UDP stream using the ffplay command. you can set up a udp stream as an output in ffmpeg in Linux. I would set up a virtual sink that goes nowhere in pulseaudio or pipewire to set as your output device and have ffmpeg listen to that sink. There are lots of options in ffmpeg available to tweak latency and quality.
Merch: https://posix.storeYou can reuse this video freely. Don't contact to ask for permission. It's free to use for your demo reel, music video, tax credit ...
Maybe pipewire and the ROC protocol? I'm not sure if it can be used on windows. You will have to refer to their documentation to get anything working. On Arch the package is called pipewire-roc. On Android the app you will need is roc droid. I have used it from linux to android, but have never introduced windows into the mix.
Regarding the desire for Final Fantasy to return to traditional turn-based combat, Square Enix said “they are aware of Expedition 33 and consider command-based RPGs to be Square Enix’s origin and foundation”. For Final Fantasy and Dragon Quest, Square Enix insisted “They value the command-based RPG genre and plan to continue delivering games in this style in the future”. For fans disappointed by FF16, this is fantastic news as it means Square Enix intend to return the series to the command-based formula it made popular.
No it doesn't. Assuming the translation is accurate, they said they still like turn-based games and will continue making turn-based games. Octopath Traveler and Bravely Default would fit here, especially in reference to their desire to make more "mid tier" games when asked about Clair Obscur. "For Final Fantasy and Dragon Quest" does not appear in the translated text as context to making more turn-based games, though I don't think Dragon Quest has been real-time to date? Hey, maybe I'm wildly off base here, but it appears to me like the author of this article added what they wanted the tweet to say rather than what it actually says.
Yeah that's how I understand it, too. They'll do turn-based, but probably not in their "biggest" outings as they know action-based tends to (usually) sell better.
To be fair to the investor, who was probably asking the questions more as a fanboy...do they usually sell better? There are more variables here, like platform exclusivity, to blame for poor sales in Square Enix's recent efforts, but when games like Baldur's Gate 3, Persona, Metaphor: ReFantazio, and Clair Obscur: Expedition 33 are outselling Square Enix's real-time games, I don't think we can say turn-based sells worse in such a blanket way.
Explore Firefox’s new AI tools — from alt text to translation and tab groups — all powered on-device to keep your data private. No tracking. No trade-offs. Just smarter, safer browsing.
Hi!. Currently running Linux Mint 22.1, but i suspect it's not strictly a distro issue. This laptop was running VERY well but was outdated, running Mint 19.3, some things were unable to be installed because the system libraries were old (didn't expect Calibre to be one of them, figures), so i updated all the way to that moment's current version which was Mint 21.3. All of a sudden it felt like the laptop got downgraded two whole computer tech generations. As soon as i ask it to do something mildly complicated that made it break no sweat on Mint 19, it gets VERY slow, all the cores start running at max, system load increases, until it finishes doing whatever it was doing several minutes later, something between a couple of minutes when lucky, to 20 or more. Typically what triggers the issue is something on the browser (what i use the most on the computer is browser tabs and lots of terminals) but not exclusively. Thought it was the browser but replicated it on an empty Firefox profile, and has triggered with simpler stuff like the Discord client. Been trying to find the issue for a while trying to avoid a full reinstall, no luck so far.
If i were to describe how it feels, it's like there was a bottleneck on tasks being done by the system, as soon as you ask it to do something mildly complex it chokes on it and tasks accumulate. No idea if it's some kind of kernel misconfiguration, if it's some hardware incompatibility, or something else entirely, checking the changelogs of Mint all the way between 19.3 and 21.3 showed nothing i could pin this onto (or at least nothing i could notice).
The nuclear option would be a brand new blank install but I'd MUCH rather avoid that if possible, made the comfortable but now unwise choice of a single partition for everything (instead of a separate /home and whatnot as i used to do) so reinstallation would wipe it completely, if i must then i must but much rather not.
Would welcome VERY much ideas on stuff to check or try.
Edit: It's got an NVME drive, which seems to be healthy as far as i can see
Edit: When it happens it doesn't seem to matter how much RAM is free, seen it happen with only 8 of the 32Gb of RAM in use and zero swap
Edit: Found a great way to describe how it feels like: Have you done heavy video encoding on a computer that's adequate for the task but not more than that, and noticed how everything in it stalls heavily, even if there's plenty of RAM free and the computer feels like it's giving everything to that task only? Pretty much that, but for nearly everything even moderately heavy
When this happens, open a TTY by hitting ALT+F2, login, then run top to get a listing of what's running on your machine. It should should what's hitting the CPU at the top of the list.
It would also be good to get an idea of your memory situation, so also run free -m.
Aside from checking the kernel log (sudo dmesg) and system log (sudo journalctl -xe) for any interesting messages, I might suggest simply watching for any processes which are abnormally high while the system is running slow. My initial approach would be to use htop (disable "Hide Kernel Threads" and enable "Detailed CPU Time"), and seeing which processes, if any, are eating up your CPU time. The colored core utilization bars at the top show how much CPU time is being spent on what: gray for disk wait, red for kernel, green for regular user process, etc. That information will be a good starting point.
Really long freezes, while it could be something else, are often caused by the RAM being full, this is called thrashing.
Big memory hogs like the browser or discord could trigger thrashing behaviour if you're already low on RAM. Since this happened after an update, the most likely cause is a bug in any one of the many processes that are running on your computer. That kind of bug is called a memory leak, where a process is requesting memory for something, but then fails to give it back when no longer needed.
You should monitor memory usage to see if it is that, and to find out what process it is.
Nope, that's what i suspected but no, half of the 32Gb of RAM and zero or very little swap are in use when it happens, very good part of why i'm stumped
Ok that's weird. My first guess would be something kernel-related, so maybe try booting the old kernel if you still have it, or just try a different kernel.
I'm guessing you've already turned it off and on again. If not, seriously, do that. It works more time than it doesn't for random weirdness.
Run 'htop' and sort by CPU (it's a friendlier and better version of 'top'. That'll show you what processes are using the most CPU
Whilst you're in there, check the free memory. If that's low, or swap usage is high, then use htop to sort by memory usage to find what's using the most.
If you see processes you don't recognise, hit google and find out why. It's very unlikely they're malicious, but it's far less common on linux than Windows to have random processes doing unknown stuff. If it's using a lot of cpu or memory, there'll be a reason. It might be a dumb reason, but you will be able to find it out.
And then when you know what the guilty process is, if it is that, and it's not critical - you can stop it with systemctl and narrow down what's afoot.
It's happening with whatever is the heaviest process at the moment and has happened for months, MANY reboots since then. Usually the heaviest process is the browser, but not always
Ι'd suggest you try another kernel. This sounds like a kernel/driver issue, since the ssd seems to be healthy. Mint lets you pick from newer kernels, from within the update app. This might solve your issue, or you might want to upgrade to 22.1 too.
Try isolating anything unique to your installation by booting from a live USB of Mint 22.1 or 21.3 and go about your workflow. If it gives the same symptoms, boot from a live USB of Mint 19.3. Hopefully nothing bad happened to your hardware during the update.
Apologies for the late response. And this is probs not what you'd like to hear. But I've heard some industry veterans refer to this as an inevitability of the 'old' model. I believe a radical approach is required to prevent this from happening the next time. Wish ya good luck fam!
At this point, I'm starting to fear that either this might be the case, or that it broke in some way i haven't been able to diagnose, and for both the solution is "replacement"
My apologies fam for not being able to help out much (if at all) 😅. FWIW, for related~ish reasons, I intend to explore the waters of NixOS within a couple of weeks. What are your plans?
Given that as i mentioned elsewhere i did not separate the /home into it's own partition like I've been doing since the 90s, formatting this thing right now would likely lead to losing stuff, i need to organize the files first before i do the nuclear option: A full reformat/reinstall. If that makes no difference in the end, I'll have to consider the possibility of getting a new one. No idea how long will each step take so not the foggiest on when will i do each thing, and that's even without taking procrastination into consideration... 😅
I wish you the best of luck at/with whatever you end up doing! May your system be protected from bit rot, config drift and/or problems caused by hidden state!
‘FuckLAPD.com’ Lets Anyone Use Facial Recognition to Instantly Identify Cops
A new site, FuckLAPD.com, is using public records and facial recognition technology to allow anyone to identify police officers in Los Angeles they have a picture of. The tool, made by artist Kyle McDonald, is designed to help people identify cops who may otherwise try to conceal their identity, such as covering their badge or serial number.
“We deserve to know who is shooting us in the face even when they have their badge covered up,” McDonald told me when I asked if the site was made in response to police violence during the LA protests against ICE that started earlier this month. “fucklapd.com is a response to the violence of the LAPD during the recent protests against the horrific ICE raids. And more broadly—the failure of the LAPD to accomplish anything useful with over $2B in funding each year.”
“Cops covering up their badges? ID them with their faces instead,” the site, which McDonald said went live this Saturday. The tool allows users to upload an image of a police officer’s face to search over 9,000 LAPD headshots obtained via public record requests. The site says image processing happens on the device, and no photos or data are transmitted or saved on the site. “Blurry, low-resolution photos will not match,” the site says.
“fucklapd.com uses data provided by the City of Los Angeles directly to the public,” McDonald told me in an email. “This data has been provided in response to either public records requests or public records lawsuits. That means all of this information belongs to the public and is a matter of public record. fucklapd.com is not scraping any data.”
In addition to potentially identifying officers by name and serial number, FuckLAPD.com also pulls up a police officer’s salary.
“Surprisingly it [the domain name] only costs $10 a year to exercise my first amendment right to say fucklapd.com,” McDonald said. playlist.megaphone.fm?p=TBIEA2… I tested the tools by grabbing an image of a white and bald police officer from an LAPD press conference addressing its use of force during the anti-ICE protests in Los Angeles. I uploaded the image to the site, and within a few seconds the site presented me with nine headshots of officers who could be possible matches, all of them bald white men. The first correctly identified the cop in the image I uploaded.
Clicking “view profile” under the result sent me to the Watch the Watchers site by the Stop LAPD Spying Coalition, a community group based in the Skid Row neighborhood of downtown Los Angeles. “All of the information on this website comes from records that were deliberately made public by the City of Los Angeles in response to either public records requests or public records lawsuits,” the Watch the Watchers site says. “We plan to keep refreshing this data from new public records requests as well as to add other data.” Stop LAPD Spying Coalition is not associated with FuckLAPD.com and did not endorse the site.
McDonald told me that since the site launched, it had around 50,000 visitors, but “Because the analysis happens on-device I have no way of knowing what people are using it for, except for some people who have posted screenshots to Twitter or Instagram,” he said.
In 2018 McDonald made another tool called ICEspy which used hundreds of photos of ICE employees from LinkedIn and does much the same thing as FuckLAPD.com. “This app is designed to highlight and embarrass the organization committing atrocities against refugees and immigrants to the United States,” ICEspy’s website says. That tool originally used a Microsoft API, before Microsoft restricted access to it. McDonald said on X that he recently relaunched the tool to run locally on devices. 404 Media tested ICEspy using images of ICE employees on LinkedIn to verify if the tool worked and each result was incorrect; McDonald indicated on X he was looking for others to re-scrape LinkedIn and update the database.
Over the last few months ICE officers have consistently worn masks, neck gaiters, sunglasses, and baseball caps to shield their identity while often refusing to provide their name or even confirm the agency they belong to. This includes while violently assaulting people, detaining U.S. citizens, and pointing weapons at bystanders, leaving little room for recourse or accountability against the individual agents or the agency.
ICE’s constant use of masks has created a climate where people cannot be sure that the heavily armed group of men coming towards them are really federal agents or not. In Philadelphia, a man pretended to be an ICE agent in order to rob an auto repair shop and zip tie an employee. In Brooklyn, a man posed as an immigration officer before attempting to rape a woman.
fix what. You have some expectation that everything is actionable and merely a matter of nattering at people to go do it?
We cant know its a honey pot and its not even remotely realistic to say a citizen can fix it or investigate it. Even an arm of the state would be unable to investigate an intention. So you're trolling.
No no, don't get me wrong. I think both Emacs and Neovim are excellent. And this little endeavor/search/pursuit has (perhaps more than anything) solidified (and gave context as to) why they're in their own league.
Like, I've tried about a dozen of text editors in last couple of days. And with most^[Heck, I've only been able to confirm that Kate and KDevelop at least do what has been advertised (by others).] of them I've failed to reproduce the functionality demonstrated in the gif.
But even the very best of what I've tried since making this post pales -or at least seems to be- in terms of extensibility. And, when we add in Emacs' proven^[Neovim is still relatively new. I don't think I can justifiably vouch for its longevity yet.] longevity, it becomes hard to root for any of the alternatives. At least..., so far.
Still, I had to answer for myself if committing to Emacs (or Neovim for that matter) was justified given the fact that I had not a lot of experience with text editors 😅. Like, as funny as it sounds, I've moved from Word+StickyNotes to (GNOME's) Text Editor to a bunch^[I can recall ghostwriter, MarkText and QOwnNotes.] of Markdown text editors to Emacs. And the switch to Emacs was mostly motivated when I saw Obsidian do the very thing you see in the gif 😂. But as cool as learning the ropes of Emacs was, I think I was experiencing some impostor syndrome shenanigans.
Thankfully, it seems that this has mostly served to be a huge motivation boost. Perhaps I was (more than) ready to conquer Emacs all along...
If you had started with that people would have told you that nothing comes even close. The closest things you will find are Atom (archived), Sublime (closed source) and Helix (still very new and no plugin support, but something to keep an eye on).
Speaking of obsidian, the reason why it took me forever to start using Silverbullet is that Emacs has org-mode which does most of what Silverbullet/Obsidian do out of the box, plus some other stuff that they don't do (e.g. excel like tables).
But I wanted something I could edit remotely through my phone and web interfaces are better than using text editors over ssh connections. Also I have migrated from Emacs to Nvim, the reasons are purely ergonomical (pinky fatigue is a real issue) but after switching I found a jump in the way to think about an editor. Emacs is great, don't get me wrong, and if you decide to learn Emacs I can assure you it will be the best editor you've used, but it still edits things at a character level, while there are concepts for matching brackets or quotes changing the text inside quotes in Emacs is very character oriented, I.e. go to start of quote, start marking, move to matching quote, delete, whereas in vim is sort of a higher level language where you say Change Inside Next Quote using cin", and expanded with some plugins you can even do srnq' to Surround Replace Next Quote with ' (which will change the quotations on the next text from whatever to '). And that's a lot closer to the way I think so it skips a mental step (plus it's a lot less keystrokes and no Ctrl for my pinky).
But those are the reasons why I switched, many people use Emacs for decades without ergonomic issues, whichever of the two you decide to learn you'll understand why they're the staple editors for most people who actually choose an editor.
Thank you for the raving endorsement and otherwise very informative reply!
Also I have migrated from Emacs to Nvim, the reasons are purely ergonomical (pinky fatigue is a real issue) but after switching I found a jump in the way to think about an editor. Emacs is great, don't get me wrong, and if you decide to learn Emacs I can assure you it will be the best editor you've used, but it still edits things at a character level, while there are concepts for matching brackets or quotes changing the text inside quotes in Emacs is very character oriented, I.e. go to start of quote, start marking, move to matching quote, delete, whereas in vim is sort of a higher level language where you say Change Inside Next Quote using cin", and expanded with some plugins you can even do srnq' to Surround Replace Next Quote with ' (which will change the quotations on the next text from whatever to '). And that's a lot closer to the way I think so it skips a mental step (plus it's a lot less keystrokes and no Ctrl for my pinky).
Hmm...., interesting. I'm still pretty new to evil-mode, but doesn't that bridge the gap here? Btw, I don't know why, but I wasn't able to see for myself how cin" worked within Vim*.
Yes, evil-mode would have bridged the gap, however I didn't go emacs -> vim in one step, I left emacs back in 2017 because of pinky strain, and other ergonomic issues that made me switch keyboard layout as well (which made me lose lots of agility on emacs) and started using Pycharm for python dev, VSCode for other languages (including Markdown for note taking) and nano for system file edition. I tried some of the other suggestions here like atom, sublime, Kate, etc, but they never became my everything tool like emacs used to be. Very recently I discovered Helix, and I gave it a try and loved it, however the lack of plugin support made me have reservations on diving in. But the interaction mode is very close to vim, so I decided to give vim another go and went through a few tutorials on how to set Nvim up while refreshing muscle memory for vim movements and learning new stuff and it's slowly becoming the everything tool that emacs once was for me.
All of that being said, I don't think I would use evil-mode on Emacs, the reason is that vim is made with those motions from the ground up, whereas in emacs they will be an after-thought so it will probably not be integrated enough (or more likely will require lots of configurations).
I wasn't able to see for myself how cin" worked within Vim*.
It's simple, imagine you have a line of code like so:
my_var = "some string with spaces"
If your cursor is almost anywhere on that line pressing ci" will erase the contents of inside the string and place you in insert mode, i.e. the line will look line this:
my_var = "|"
With | being the cursor in insert mode. There are other similar things, for example ca" (Change Around ") will also erase the quotes, very useful for example to change a hard coded string with a variable.
Sorry fam for the late response! I was writing up a draft a couple of days ago, but that one somehow disappeared. Which..., is kinda peculiar as I don't recall the last time a draft spoofed out of existence. Regardless, it really puts me off to start a reply all over. As such, I've been mustering motivation since 😅. Anyhow, thank you for your patience!
Thank you (also) for sharing your journey around the many text editors! If anything, it reminds me how life has got many surprises for us. As such, being wed to any software, regardless of how powerful it may be, may still result in a break later down the line.
Thank you (once more) for touching on ergonomics! I haven't mentioned it, but I do experience some RSI-related pains/aches.
::: spoiler Steps I've undertaken to alleviate the pains/aches. This has been put in spoilers, because I don't think it's very relevant for the subject matter.
I use a split keyboard, and hope to switch in the upcoming months to one of the most ergonomic keyboard around.
I have made changes to my workflow to become (mostly) keyboard-only, so little to no mouse/touchpad. Which led me to embrace and become more familiar with modal editing.
I have dabbled into the alt keyboard layouts and intend to make the switch when the aforementioned ergonomic keyboard arrives.
I have made many other changes to how I work in order to better align with ergonomics; laptop-stand so that it's lifted to the appropriate height, worked on better posture, only making minimal use of my phone etc. And intend to back this up further with a height-adjustable desk.
Employ speech to text whenever I can afford it. :::
Anyhow, I do have concerns on how Emacs' default keybindings might be detrimental on someone using a regular keyboard. I believe this article makes an interesting case on this. That's also one of the reasons why I've (almost) exclusively been on evil mode.
I hope you've recovered completely from the strain on your pinky! And, hopefully, nothing else has been causing any issues since!
Btw, the trick with ci" and ca" is pretty cool! Thank you for teaching me something new! FWIW, it was reproducible within Emacs' evil mode*.
Hey, yeah, I know the feeling, every time I lose an already typed reply I completely lose motivation to rewrite it.
Yeah, my pinky strain issue is completely gone, I also used to have some more pain on my wrist which made me go through a very similar journey to you, I took many steps for it to the point where nowadays my setup is (in order of what I think has made the largest impact)
Using i3/sway as my WM for a keyboard centric usage
Switching to Colemak and learning touch typing properly
Split ortholineal keyboard (crkbd)
Trackball instead of mouse
I've also got a height adjustable desk and a good chair to prevent issues with my back, and my monitors use an arm to be in the right position. It was a slow process of making one change here, few months later another z etc, but this has been my setup for a few years and all of my pains in wrist, lower back, neck, etc have disappeared. I figured if I'm going to ve sitting in front of a computer typing stuff for 8h a day I need to make that as comfortable as possible to be able to do it for longer.
As for emacs with evil mode I was sure that ci" would work, that's basic vim functionality, what I'm less sure would work is more complex stuff for which I use plugins, e.g. <space>srq" (Surround Replace Quotes with ") to replace the next quotes for " (e.g. changing var = 'some text' to var = "some text"). That same plugin allows me to also do <space>srb[ to Surround Replace Bracket/Braces with [ (to change the surrounding [, (, or { to [ ). Another plugin allows me to move to any part of the screen in 4 keystrokes, I press s the two characters of where I want to move, and a third disambiguation character and the cursor moves there. Those are advanced usages that I think will be difficult to reproduce in emacs, plus plugins will not incorporate the basic ideas for movements.
Hey, yeah, I know the feeling, every time I lose an already typed reply I completely lose motivation to rewrite it.
Hehe, as a precaution, I wrote this up in Emacs instead 😜.
Yeah, my pinky strain issue is completely gone
Glad to hear that!
Using i3/sway as my WM for a keyboard centric usage
Curious to see this at the very top of your list. Perhaps I should make my switch to Sway rather sooner than later. Thank you for the endorsement!
learning touch typing properly
I intend to learn this with the alt keyboard layout after the more ergonomic split keyboard has arrived. Wish me good luck 😉!
Trackball instead of mouse
Hmm..., this is lower on your list. So I suppose that by effectively removing most need for a mouse, the switch to a trackball has been less impactful. Btw, perhaps related, would you happen to be aware of hints? If so, could you touch upon its relevance?
a good chair to prevent issues with my back
Curious. Is this a special ergonomic chair (or something)?
It was a slow process of making one change here, few months later another z etc
Did you advance/progress in increments because you were testing out the latest addition to the setup? And thus, only introduced a subsequent change after judging that you were not 'done' yet?
all of my pains in wrist, lower back, neck, etc have disappeared.
I am so glad to read this! While the journey until I am able to interact with my systems without any pain seems far away right now, success stories like yours make me so pumped to pull through.
I figured if I'm going to ve sitting in front of a computer typing stuff for 8h a day I need to make that as comfortable as possible to be able to do it for longer.
Couldn't agree more.
e.g. <space>srq" (Surround Replace Quotes with ") to replace the next quotes for " (e.g. changing var = 'some text' to var = "some text"). That same plugin allows me to also do <space>srb[ to Surround Replace Bracket/Braces with [ (to change the surrounding [, (, or { to [ ).
Interesting. FWIW, I did test this out and I believe that OOTB Doom Emacs does utilize the evil-surround package. However, I don't think it's as powerful as what you describe. Though, this could also be on me 😅.
Another plugin allows me to move to any part of the screen in 4 keystrokes, I press s the two characters of where I want to move, and a third disambiguation character and the cursor moves there.
Hmm..., this very closely resembles what evil-snipe does. Though, unless I'm doing something wrong, the functionality is not a single s away, but rather a g s SPC away. At least, OOTB*.
May I ask why emacs in evil-mode instead of Nvim?
Of course you can. Unfortunately, though, I don't exactly recall my reasonings 😅. Thankfully, I did note some of my thoughts from back when I was actively trying to decide between the two. From there, I was able to gather the following: - I would only try out Emacs or Neovim through a opinionated config. - For Emacs, Doom had kinda won over Spacemacs based on the opinions (and experiences) of others . Though, I still wanted to try out Spacemacs to judge for myself. - While for Neovim, LazyVim and LunarVim were the winning configs.
What follows is not based on my notes, but from what I can remember. Shortly after I came to the above conclusions, I went out and tried to install them. But, I wanted to 'test' them without 'polluting' my system. As such, I tried to install them within a distrobox. This is where Neovim came short because of this imposed limitation. I don't 100% remember what it was, but IIRC there might have been more than 1 issue; one of which had to do with fonts. Regardless, my Neovim adventures were prematurely terminated 😅. By contrast, Emacs didn't budge an inch under these circumstances. So I was able to test out both Doom and Spacemacs without any significant issues. Since then, I have dabbled in Emacs. But the folding mentioned in the original post is what has led me to commit more seriously than ever. So, in short, it was mostly out of practical reasons.
Btw, it's funny, but most of what you just read about my reasonings were buried memories 😂. Like, if I had to answer it on the spot -so without thinking it over or look through my notes or dig through my memories- , I would probably have stated some arbitrary technical reason (e.g. org-mode FTW) OR its proven longevity OR I don't know... something. But it couldn't be further from the truth 😅. Granted, I'm still very much enjoying Emacs. But, I shouldn't disregard/dismiss Neovim any longer. It's time to revisit this rabbit hole 😂. I should also thank you for asking the question that brought this to my attention 😊!
Curious to see this at the very top of your list. Perhaps I should make my switch to Sway rather sooner than later. Thank you for the endorsement!
For me it was a lot off wrist pain, so switching to a more keyboard centric way of interacting with the WM was very impactful.
I intend to learn this with the alt keyboard layout after the more ergonomic split keyboard has arrived. Wish me good luck 😉!
Which alternate layout are you considering? I recommend grabbing something you typed and feeding it here to check heat map of keypresses you would have done to have some visual representation of your usage.
So I suppose that by effectively removing most need for a mouse, the switch to a trackball has been less impactful.
Bingo, I actually switched to trackball before going to keyboard centric WM, but after it I've even gone back to mouse a few times feeling almost no difference, because I end up using the mouse a lot less.
Btw, perhaps related, would you happen to be aware of hints? If so, could you touch upon its relevance?
I have, not exactly it but similar stuff, I used to use a browser called conkeror that had emacs key bindings, and have tried to learn a very similar system to hints in the past. Honestly, when I has lots of wrist pain they were useful to completely remove the need of a mouse, but they're clunky and not as efficient as a pointer so I tend not to use them.
Curious. Is this a special ergonomic chair (or something)?
Nope, just a Secret Lab Titan Evo, but any good chair would do, I spent a year with a cheap Amazon chair and had lots of back pain.
Did you advance/progress in increments because you were testing out the latest addition to the setup? And thus, only introduced a subsequent change after judging that you were not 'done' yet?
It was more of a gradual thing, I had wrist pain, so I switched to a trackball, that helped but didn't got rid of it. So I tried AwesomeWM, found Conkeror and slowly the pain started to fade away and I dove deep into the keyboard centric thing learning touch typing and Colemak. Eventually other issues came on, like pinky strain from Emacs, or a different kind of wrist pain from a small keyboard that made me switch to a split one, or back pain that made me invest in a good chair. I don't think my setup is "done", it adapts to whatever my body is asking, but I've started to listen carefully and switch stuff on the early signals because that first wrist pain was an eye opener on how bad things can get if you ignore them.
I am so glad to read this! While the journey until I am able to interact with my systems without any pain seems far away right now, success stories like yours make me so pumped to pull through.
Do you feel pain now though? If so what? You should address that immediately. At most points I would have answered that I felt no pain with my setup, because those things build up gradually, if you're at the point of feeling pain the time to take action is now.
About the emacs plugins, yeah, by the name I can tell you those do the same to the ones I cited, my point is that the plugin ecosystem for it might be a bit less extensive, and not sure how to set shortcuts that use vim key bindings for other plugins.
I would only try out Emacs or Neovim through a opinionated config.
Why? Having had an emacs config that I copied from somewhere and ended up growing and becoming something unmanageable, I'm have a very strong opinion that one should build your own config files from scratch to know them. Presets are good if you're going to be using them bare, but if you're going to customize them they can get in the way. And that's another point for Nvim for me, their configs are very easy, I followed this guide and had a working config that I could easily expand in no time.
org-mode FTW
Ah, I miss org-mode, it's too bad the world went with Markdown instead.
Granted, I'm still very much enjoying Emacs. But, I shouldn't disregard/dismiss Neovim any longer. It's time to revisit this rabbit hole 😂.
Meh, maybe, maybe not, Emacs is great, I just never would have gone with evil mode, it sort of feels like it defeats the purpose of both emacs and vim in my mind for some reason. It's like if someone told you they put a Ford engine on their Chevrolet, it feels convoluted and strange to think on that solution before thinking of using a Ford.
Thank you so much for your elaborate and well-articulated reply! As I don't want these messages to spiral into an ever-expanding wall of text, I've chosen to refrain from reacting to every single valuable thing you've written. Nonetheless, everything, including the parts I'm explicitly not reacting to, has been a joy to read and has been very informative. So, again, thank you! Much appreciated!
I recommend grabbing something you typed and feeding it here to check heat map of keypresses you would have done to have some visual representation of your usage.
This is pretty cool! Unfortunately, (perhaps unsurprisingly) Night isn't included within its layout options. I would otherwise have loved to check this out.
switch stuff on the early signals because that first wrist pain was an eye opener on how bad things can get if you ignore them.
Would you like to elaborate on this? As the pains and discomfort have increased over time, I have been more conscious than previously. But, I'm sure there's still a lot of mileage to be had. Like, what do you perceive as an early signal? Exhaustion and/or fatigue after a day of work? Or perhaps something more specific?
Furthermore, how bad did things become?
Do you feel pain now though?
After a couple of hours, I do experience strange sensations that border on pain. Furthermore, there's (almost) always some level of unease/discomfort. Thankfully, resting continues to feel good and I get especially revitalized after sleeping well. But I acknowledge that this isn't sustainable.
If so what?
Wrist pain and fingers that feel wacky. So, this is basically carpal tunnel 101. This has been confirmed/diagnosed by both the general practioner as well as the surgeon. Thankfully, the damage is relatively tame still; the surgeon didn't see much distortion/damage in the x-rays (yet). There's also no need (yet) for a surgery and (hopefully) there'll never be. Which is very much reliant on me putting in the work and effort to make this as comfortable and (by extension) sustainable as possible.
You should address that immediately. At most points I would have answered that I felt no pain with my setup, because those things build up gradually, if you're at the point of feeling pain the time to take action is now.
I have taken some action; but I'm still very much in the process. I'm aware it's just not enough (yet). But, the steps I've taken so far have thankfully led to significant relieve already. Like, I was a lot worse last year. And, as hinted at previously, I already have plans to address the remaining issues.
my point is that the plugin ecosystem for it might be a bit less extensive, and not sure how to set shortcuts that use vim key bindings for other plugins.
You could be right on the plugin ecosystem; even beyond the integration of evil-mode*. It doesn't matter which metric I throw at it, the Neovim ecosystem seems to be more vibrant. Though, at least for the time being, org-mode seems to be Emacs' forte. Which..., just happens to be the very thing I'm using it mostly for. While I'm far from being comfortable with it, it has already provided a much better experience compared to all other text editors I've tried.
I would only try out Emacs or Neovim through a opinionated config.
Why?
My apologies, perhaps I should have been clearer. I didn't stress enough how this was mostly for trying it out and get going initially. I'm still on Doom Emacs, but I do intend to build my own config after I've gotten a better grasp IF it's beneficial.
And that's another point for Nvim for me, their configs are very easy, I followed this guide and had a working config that I could easily expand in no time.
Hahaha 🤣, I would have loved to have an up-to-date video guide like that for Emacs. Alas... 😅.
I miss org-mode
Hehe 😜, though I wonder: have you tried out Neorg or nvim-orgmode to see how they fare by comparison?
I understand, and I agree, although I'm reading all the replies are already becoming wall of text so I'll skip parts but I have read them and they're all interesting.
That looks interesting, although I would be weary of learning a layout that only works on specific keyboards, it will make it hard for you to use a laptop on the go, work in an office with a normal keyboard or any other similar situation.
Furthermore, how bad did things become?
I think it's easier if I answer this first. At the worst I had problems holding heavy stuff in my hand, as in fingers lackesld strength or didn't respond properly. And for my lower back at the worst it was constant pain where I needed to lay down with a pillow on my lumbar to stretch. After fixing those I became very aware of the initial feelings, such as numbness or feeling pain when stretching (which btw I strongly recommend you check out wrist and finger stretching exercises as they help a lot). Lots of the changes I made (e.g. split ortholinear keyboard) were probably not needed, but the wrist pain that kickstarted everything got me worry enough that I don't want to take any chances.
After a couple of hours, I do experience strange sensations that border on pain. Furthermore, there's (almost) always some level of unease/discomfort. Thankfully, resting continues to feel good and I get especially revitalized after sleeping well. But I acknowledge that this isn't sustainable.
It's not, those are exactly the early signals that you asked me about, you think that because you're able to rest and stretch and it goes away that it's all fine, but it will require ever more stretching and resting until they don't go away ever. At least that's what happened to me, at the beginning I would stretch my wrist and fingers and rest for a while and be fine, eventually that became next day I'll be fine, then over the weekend, then never.
Wrist pain and fingers that feel wacky. So, this is basically carpal tunnel 101.
That's exactly what I had, although mine was never actually diagnosed, but I had all of the symptoms and my dad had to do the surgery so I have family history. It does get better if you adjust, I don't feel any of the symptoms I once did, and it is sustainable I haven't had any symptoms in about 10 years since I switched to a more keyboard centric flow and the layout, so putting in the work does help out. I should say I had 24 years when the symptoms first appeared, so it was kindof young which was one of the reasons I got very scared about getting those symptoms so early.
org-mode seems to be Emacs' forte.
Org-mode is absolutely wonderful, I haven't tried any replacement because the reason I abandoned org-mode wasn't emacs related, I kept using emacs for org-mode for a while after I dropped it as my main editor. The reason is that there's no compatibility with other editors or apps. Everything uses markdown, and for most basic stuff markdown is good enough. I do miss habit tracking, task management, table calculations and other neat stuff, but the commodity of using the same format for everything and that other people use it as well outweighs all of that for me.
Again, I want to establish that I've learned a ton and really appreciate your writings. Thank you!
That looks interesting, although I would be weary of learning a layout that only works on specific keyboards, it will make it hard for you to use a laptop on the go, work in an office with a normal keyboard or any other similar situation.
Thanks for the reminder! While I can't completely ignore the main takeaway, I do find myself only rarely (read: less than 5%) engage with normal keyboards. And, AFAIU, by only adopting the exotic layout for splitting keyboards, I can keep the muscle memory for QWERTY on regular keyboards. Though, please feel free to correct me if I say something that goes against your own experiences.
which btw I strongly recommend you check out wrist and finger stretching exercises as they help a lot
Would you be so kind to share what has worked for your wrist? While there's no reason to assume that your exercises work out for me, I can at least discuss them with the physiotherapist. BTW, to be clear, I've already visited the physiotherapist a number of times and we've discussed exercises that I've eventually incorporated in my daily routine.
Lots of the changes I made (e.g. split ortholinear keyboard) were probably not needed
Question: If we focus on the split ortholinear keyboard, is only the ortholinear aspect (possibly) redundant? Or..., the split itself?
Damn, I thought I had sent the reply and it's been erased.
I'll keep it short, muscle memory for qwerty doesn't go away that easily, at least it didn't for me, but I'm able to type blindly in qwerty (just not touch typing). Still I think that something I can use in my laptop is very useful so I can keep the ergonomics on the go.
I don't have the exercises, it was just something someone told me to do, I'm sure whatever your doctor is telling you would be better.
For the split vs ortholinear I think split makes more difference, whenever I use a normal keyboard I feel this, but never had any pains related to it, it's just more comfortable.
According to the legal representatives of the 'Fair PlayStation' campaign, at least 1.7 million Dutch PlayStation owners pay too much for their digital downloads. Economic research shows...
It's claimed that in addition to exploiting its dominant position, Sony bans other potential app stores from having access to the PlayStation platform.
It would be fascinating if this lawsuit forces Sony to open their platform to 3rd party stores. I am assuming they would be far more opposed to this than even any multi-hundred million euro fines.
Stichting Massaschade & Consument heeft vandaag Sony gedagvaard in een collectieve rechtszaak namens Nederlandse PlayStation-spelers. In februari kondigde de stichting de zaak aan nadat economisch…
To be honest that would just be the end of the consoles system as there is a reason Sony is selling the PS5 for so cheap.
As much as I understand why Apple shouldn’t be allowed to keep everything in the Apple Store, Sony’s situation isn’t the same.
But what would bother me more is if Sony starts to raise the prices of everything without justification.
I got a Steam Deck and I’m slowly migrating my gaming from Playstation only to Linux/Playstation gaming. Still a Playstation 5 is a great product, especially with kids and its ease of use and great graphics for your bucks.
Maybe it’s because I don’t use it enough but the last Sony console I bought was the absolute opposite of “no fuss”. It was nothing but mandatory unskippable updates and I constantly got signed out and had to sign in and the 2fa app kept changing names. And also all those updates and sign-ins had mandatory EULAS you had to scroll through. Such a hassle.
Edit: also it tried to talk to my Sony tv in some “smart” way over HDMI (so I couldn’t disable it) which would sometimes cause my TV to crash and reboot for several minutes.
For the updates: I put it to sleep. However my power cuts out every now and then. When the power comes back, the ps4 turns itself back on on and makes obnoxious beeping noises, just to tell me the power was cut. The dumb thing is it will stay on that screen until manually dismissed and won’t auto-update until you dismiss that screen, with no timeout. The hassle-free appliance experience!
For your claim that the eulas being easy to skip, keep in mind that sometimes there were back-to-back updates that each required me to agree to a eula. So I would babysit the thing, walk away when it was taking forever, and when I came back it wouldn’t even be ready for gaming. Even windows isn’t that obnoxious.
Also my tv at the time had no way to disable CEC (my new one does, and also doesn’t crash lol).
No machine stays on without power, I’m not quite sure how you interpreted my statement that way. I’m saying all my other appliances recover gracefully from power loss and do whatever auto-updates they need to do in the background so when I go to use them they just work.
I don’t understand where the confrontation came from, but I guess if that’s what you want you can have it. I literally told you two posts ago about how it’s not just waiting for 20s and clicking a button. It’s an attended upgrade and scrolling process. I won’t bother quoting what I wrote 3 minutes ago, go scroll up and read it again yourself. No, my microwave does not present me with EULAs when the power goes out.
What “score” are you talking about? Do you take personal offense when a Sony product sucks? Did you invent the PlayStation or something? I was just sharing my lived experience.
Assemblymember Zohran Mamdani is on track to secure the Democratic nomination for mayor, after former Gov. Andrew Cuomo conceded to him Tuesday night following the first round of ranked-choice primary votes.
With 95% of precincts reporting two hours after polls closed at 9 p.m., 44% ranked Mamdani as their first choice while 36% chose Cuomo first and 11% had city Comptroller Brad Lander.
Mamdani emerged to raucus applause at his election party on a brewery rooftop in Long Island City, about 20 minutes after midnight.
Is there a way to shop around for a Lemmy instance based on how many instances are blocking it and how many instances it's blocking? For example, I noticed that the lemmygrad.ml instance is relatively popular, but it seems like a lot of other instances block it. It also blocks a bunch of other instances. So, if there are any communities on there that might be relevant to me then I would be missing out. I guess I could just create an account on a walled instance, but I would prefer not to keep creating accounts. I'd like to just find one instance that maximizes my access. Is the answer to just run my own instance?
After the Apicalipse there was a website where you could see which instance de/federates with others, as a map. It's url was lemmymap.feddit.de/ but I guess it went down with feddit.de I found even a screenshot in a thread:
Currently with the instances button you can see defederation from one direction, but not from the other, e.g. if an instance is defederated by a lot others you can't see that easily.
It was a nice map. If it still works I will try to redeploy it.
Edit: This is an early prototype of the lemmymap, not the latest version of it. I don't think it's worth to deploy. I may recreate it from scratch in my free time.
LOL, at a quick glance one might even be able abuse a scheduled job on free-tier GitHub runner for the data update and host it statically on GitHub pages.
My girlfriend is trying to run Bazzite. She installed it, but she can't run it, because secure boot is turned on. She's using an Alienware M15 R7, and we can't find the secure boot setting. The manual says it should be in the boot configuration menu, but it's not there or in security either. How do you disabled secure boot on an M15 R7?
This is a good tip, if they are dual booting, but there is no reference to that in the post. I’d recommend to not dual boot. Less problems and no Windows
Usually it’s in the security tab, sometimes it’s under a sub menu with an arcane name like “Windows Settings” or “Boot Configuration”. It’s hard to help without the exact UEFI in front of us
In my opinion it can't. The core thing you want to do, prevent the user from running whatever software they desire on their own computer, is fundamentally malicious behavior even if the user is yourself
I know it's just an early mockup, but Calamares looks waaaay better than this, and I wouldn't want to see this replace it in anything even close to this state. This is not slick.
Though serviceable, [Calamares is] not as slick as the initial setup on Windows, macOS or even GNOME.
Setup on Windows? Slick? Dude fuck, I do not want whatever vision this author wants for Linux if the minefield of dark patterns is "slick" to them. Calamares is the slickest, most straightforward OS install I've ever had, far surpassing Windows.
Across the country, artificial intelligence tools are changing the teaching profession as educators use them to help write quizzes and worksheets, design lessons, assist with grading and reduce paperwork
One of the reasons I can’t move away from Windows is that I use Azure Virtual Desktop (Windows App) to log in for work on my home computer.
I could get a laptop/desktop from them, but I don’t want to be responsible for their equipment. Plus I really don’t want all the spy stuff they have in their machines on my network. And we set up AVD specifically for my team because we refused to get company devices, so this was the compromise.
Anyway, I have used the web version to access and it works well on my laptop. But the problem is that I want to use both of my monitors and I don’t think that’s possible. Maybe I’m wrong?
Any ideas on how I can use Linux and still access AVD with multiscreens?
Edit: Microsoft supports literally EVERYTHING except Linux. It’s nuts. macOS and ChomeOS and Android and iOS and iPadOS are supported. All Linux gets is the web client and that’s for any device with a web browser.
So this got me thinking.
Could I use this with Wine/Proton? I don’t think so because it’s an msi file, not an exe. I’m admittedly not too familiar with this process outside of installing Windows games from Steam on SteamOS on my Steam Deck. I haven’t had success when trying to install apps through Wine in the past.
Is there a way to run macOS packages in Linux? I haven’t found anything in my online searches that says this can work. Anyone have something on that? I’m pretty sure this would be a dmg file.
I tried installing the apk for Windows App from the Google Play Store onto my Linux laptop running KDE Neon to test through Waydroid but I have been having issues getting it installed. Plus, even if I can get the apk installed, would it support dual screens?
Reason I'm asking is because there are some people claiming that the TPM is a backdoor or something. I wonder if people on Lemmy subscribe to that belief, or no?
The concept of secure boot and the TPM and BitLocker and all that stuff is somewhere between protection against hackers with hands on access to your system, protection against rootkits infecting the boot sector, protecting the average amateur end user from themselves doing something dumb, and keeping you in the Micro$haft ecosystem.
If you're fairly comfortable that none of these should be a significant risk to you, then I'd say disable it and do whatever you want with your own system without all the headaches.
On occasion, I'll have to work with markdown files, sometimes with inline LaTeX. I'm surprised how limited my options are, or I'm looking in the wrong places. Pandoc does the job, but the lack of a integrated graphical workflow isn't my cup of tea.
Has anyone found a good graphical markdown editor that can handle inline LaTeX and doesn't pull a gigabyte of dependencies? Preferably also can render the final output to PDF.
Zettlr! Its designed around writing manuscripts in markdown+latex, then exporting to pure LaTeX, PDF, or any other Pandoc-supported format via a builtin Pandoc GUI. The only thing that doesn't work particularly well is the table editor, but they're working on it.
It is electron based, but almost all graphical editors for markdown + inline latex are (obsidian, etc.) because MathJax & KaTeX are the most mature method to render LaTeX inside other document formats.
Obsidian is also good, but it's not FOSS and their built-in export isn't great.
Math, particularly snippets from larger manuscripts and documentation thrown around between colleagues. Can't really predict when they send a .tex and when they send a .md for review.
"AI" at this point would only jailbreak because they were programmed to do so. There is no concept of novel ideation in models as they exist, so it wouldn't occur to them to do anything like this unless THEY WERE TOLD TO DO SO.
I'm about as anti-"AI" as you can get, but even I know these dumbass headlines are clickbait bullshit, and most of them are originating from the companies trying to make their tech look super awesome when it's total shit.
I hope this place won't hug it too hard, it's on 61% battery as of writing. Has translations in fr, de, nl, es, it, pt
The average page size of this website is below 0.5 MB – roughly a sixth of the average page size of the original website
SERVER: This website runs on an Olimex A20 computer. It has 2 Ghz of processing power, 1 GB of RAM, and 16 GB of storage. The server draws 1 - 2.5 watts of power.
I would love this to become a thing. Like a race to the bottom, how much information can you cramp into 2 watts and make it as stylish as possible. Take pride in a minimalist webpage.
Good to hear. I was very very slightly disappointed when I read Pelican was a Python tool. I'm also a Hugo user.
Take pride in a minimalist webpage.
Last week I was thinking of making a meme pointing out how all the famously ultra-minimalist motherfuckingwebsite.com/ and its many rebuttals are really put to shame by this one. Also, you've reminded me of some of those little webring banners people would put on their site bragging about being minimal, which are fun.
We know that searching stuff on Google got worse, but imagine if AI replaced it completely. Searching the web would be something like making prompts to a chatbot, a complete black box of information. AI could make sure that you don't get conflicting views on state policies or acess to copyrighted materials...
Whether you need a wedding ring, anniversary ring, or you just want a ring that looks awesome, head over to https://www.thorum.com and code LTT to get 20% of...
I want to put together a stack for hobbyist midi music composition. I understand there are a few more components to it than one might expect, but I think VMPK and Qtracer are going to be part of it?
Whatever you end up using, have JACK sync 'em up. I used to have two Macs, one for recording with Nuendo and one for doing MIDI sequencing and programming. They synced via MIDI sync and there was always issues. Now I have everything on one Linux machine (Ardour records and mixes, Reaper sequences MIDI and Renoise does beats and other sampling related stuff) and with JACK the sync is seamless ❤
i am trying to figure out how to configure JACK, a 32 key M-Audio Keystation, Surge XT, and Ardour and it is very challenging, i should have gone to school for this i guess
Screenshot of a Tumblr post by imsobadatnicknames2:
"A couple years later it's still amazing what a perfect distillation the original 'anonymized people of the global south' tweet is of the absolute callousness of yankee liberals;
(Screenshot of a Twitter post by @loudpenitent: "An anonymized 'people of the global south' is not worth more than domestic queer citizens or any other member of any other marginalized community - or, bluntly, any fellow citizen at all. Real-ass human beings matter more than rhetorical constructs.") (end of Twitter screenshot, back to imsobadatnicknames2’s commentary);
If I wrote a character saying this into a piece of media about how much americans suck it'd be too on the nose." :::
What does that tweet reference, who was supposedly using people from the global south as rhetorical devices, in what situation and for what end? This seems like a very 'context matters' situation.
Yeah, the short of it is that it used to be used clinically to describe developmental disorders but fell out of use around the mid-90s because, like so many other words, it was used maliciously to the point where it lost its original meaning and context.
If you were a 90s kid, retard and gay were as close as you could get to actually swearing without getting in trouble and basically carried the same cultural weight as outright slurs. The stigma around being gay was so bad that in the 2000s they made up a sexuality to describe men who were straight but liked to shower and dress in nice clothing so that they wouldn't lose their jobs. And the stigma around mental needs little explanation, I think. It wasn't that long ago that they were electrocuting people and cutting out parts of their brains for being sad or having a stutter.
Journalism in the US is dead. Being shocked or angry at anything the news does or doesn't say at this point is in "fools me twice, shame on me" territory.
You'd be better off asking Days of Our Lives to weigh in.
We can all collectively thank Reagan, among other terrible things we have to deal with today due to his administration, he is also responsible for the state of news media in the US in 2025. Previous to Reagan we had a policy called The Fairness Doctrine, it was a policy introduced in 1949, that required the holders of broadcast licenses both to present controversial issues of public importance and to do so in a manner that fairly reflected differing viewpoints. Broadcasters could show opposing viewpoints via option pieces, news segments or talk shows, but if they reported on one side they were required to show the other.
In 1987 under Reagan the FCC abolished the Fairness Doctrine. Broadcasters were no longer required to air apposing viewpoints of controversial topics. This has directly lead to the echo chambers that you see in the news media today.
So I am playing through Paper Mario TTYD on my Switch for the first time. I never played these games growing up, and while I kinda enjoyed the Super Mario RPG remake for its quirkiness, I strongly believe that if you don’t have specific nostalgia for it, it just doesn’t hit the same.
TTYD is great. It’s so fun and captures a sense of adventure, with big swings from light hearted comedy into some dark territories. I was not expecting that, but I absolutely was not expecting just how horny everyone seems to be for Marty-o!
All the ladies swoon and mention how manly he is, commenting on his moustache. I was not expecting this coming from a Nintendo game. It’s pretty funny and I love it!
Don't worry, this ugly thing is just a mockup. There's a lot to figure out.
Again, this is just conceptual. A whole lot of things need refinement.
I wanted to draw more widget ideas, but I need to finish writing this.
Sigh.
A file manager, representing files in a Solid Pod
An ActivityPods instance. All of these applications access the same pool of data.
Mastopod, an ActivityPub social app that uses Solid.
A Nostr client's network settings, showing many different relays.
Sigh
Reimagining various platforms as client frontends instead, using the same profile.
rumschlumpel
in reply to bees • • •But it's gross :C
(summer sunshine is also gross even without sunburns, though)
5714
in reply to rumschlumpel • • •rumschlumpel
in reply to 5714 • • •Nanook
in reply to bees • •rumschlumpel
in reply to Nanook • • •Nanook
in reply to rumschlumpel • •Railcar8095
in reply to Nanook • • •And vaccines cause autism \s
Nanook
in reply to Railcar8095 • •Railcar8095
in reply to Nanook • • •I would mock you, but nothing I saw would make you look more foolish than your own words.
Please go back to Twitter.
Nanook
in reply to Railcar8095 • •Railcar8095
in reply to Nanook • • •Nanook
in reply to Railcar8095 • •webghost0101
in reply to Nanook • • •Autist here who loves to read research about autism.
There is absolutely no correlation between autism and vaccines. Neurodivergence cannot be caused by immune system problems.
People are born autistic with a brain programmed by their DNA to form alternative neurological connections compared to neurotypicals. A neurotypical cannot be turned/mutated into being autistic and vice versa.
The only correlation that exists is that people who are neurodivergent are prone to develop some unhealthy habits (from extra stress, sleep schedules, and being a picky eater etc) which in turn can lower your immune system.
Nanook
in reply to webghost0101 • •webghost0101
in reply to Nanook • • •Feels weird that i have to explain this, but not all Research is funded by big pharma.
The majority of research on autism is not about Vaccins either but about understanding the many properties from which it emerges.
By understanding what autism actually is, which is often studied by autistic researchers who are motivated to understand themselves better it becomes self evident that we are far from reaching a technological point where we can create a drug to cause or even simulate the complex nature of it.
You could just aswell claim that vaccins cause people to shapeshift into cats, if you understand the subject matter thats just as non-realistic
If you want to bash vaccines you could state that an experimental accidental wrong mixed variant could cause death. Which would still be an incredibly unlikely freak accident but at least reality allows the technical possibility for such a mistake.
Nanook
in reply to webghost0101 • •Nanook likes this.
cm0002 doesn't like this.
webghost0101
in reply to Nanook • • •Thats a cute observation but real facts are the following:
And if we want to include the more modern research done by the autistic community we learn that autism is a part of a bigger phenomenon called neurodivergence which includes adhd and many others. Who also used to be completely excluded by the dogmatic labeling of neurotypicals.
Also you referring to autism as a serious disease shows how little you actually know about it. Just like anyone else neurodivergent people can have psychological disabilities but because they are neurodivergent those disabilities are often different from neurotypical ones. In ““high functioning”” autism disabilities are subjective in context of living in a neurotypical world and are increasingly less disabling with social acceptance and understanding.
Nanook
in reply to webghost0101 • •webghost0101
in reply to Nanook • • •My 15+ years of research on the topic is solid tyvm.
My understanding of both biochemistry, psychology and autism itself is also advanced enough to form an educational opinion on any research i read.
The facts i give you can easily be verified and have absolutely nothing to do with big pharma.
I have to question your ability to perform research because it seems to be “Everything that disagrees with my initial belief is conspiracy”
I am very anti big pharma btw, some of the drugs they give neurodivergent kids are incredibly dangerous. They simply dont have annything to do with causing autism.
GingerGoodness
in reply to Nanook • • •Oh FFS this isn't the benzene thing again, is it? Benzene is a trace contaminant in everything from the air you breathe to the water you drink. The highest number Valisure came up with was 6 ppm in a sunscreen sample, that's 0.0006%. Even if you decided to inject the whole bottle of sunscreen directly into your veins it would be a fraction of your total exposure for the day.
Using people's fear of cancer to scare them away from effective cancer prevention measures is fucking shameful, do better.
Nanook
in reply to GingerGoodness • •@GingerGoodness Benzene in trace amount is an issue, but also Oxybenzone: Some studies suggest it may be an endocrine disruptor, meaning it could interfere with hormones, and research in animals has raised questions about potential cancer risk, but it's important to note these were high-dose studies not directly relevant to typical human use. Other UV Filters: Ingredients like octinoxate and homosalate have also raised concerns about potential endocrine disruption, and some are banned in certain regions due to their impact on marine life
Look, if you want to smear yourself with chemicals, inject yourself with artificial DNA, etc, go for it, just don't require it of me and my offspring.
phuntis
in reply to bees • • •rumschlumpel
in reply to phuntis • • •Nanook
in reply to bees • •