Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated
macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!
[US] Any suspect that says "Am I free to go?" during an interview where they haven't been Mirandized, and then if they are free to go leaves immediately.
Or if they are not free to go and Mirandized "I demand a lawyer." and "I am asserting my right to silence." and nothing else. Playing cute games in an "interview" so you can get off some zingers at the cops is at best not going to make your situation worse. Very likely though, the longer you talk, the worse it will get. Therefore any technique that is giving up your right to silence and council is sub-optimal.
This footage doesn't catch the public eye as often because it isn't spicy. It's just boring. You want to be boring because the cops who booked you are not the right people to be spinning your side of the story to.
Very likely though, the longer you talk, the worse it will get. Therefore any technique that isn't giving up your right to silence and council is sub-optimal.
Just checking, assuming 'giving up your right to silence' should be 'asserting your right to silence'? Giving up that right would be suboptimal, no? Or am I misunderstanding something here?
I don't like this example, because it ignores that normal people take planes, too - sure it's less frequent, and it's usually public transport-style as opposed to just being one billionaire and their entourage per plane, but there's also just a lot more normal people than billionaires. Not to say that the pollution made for billionaires' personal lifestyles isn't massive or that rich people's economic and political activities aren't the main driver of climate change, but using such an obviously bad example makes it too easy to dismiss the general sentiment of the joke. If every non-billionaire stopped taking plane rides, it would make a difference for climate change - the issue is that rich people do their hardest to make sure that something like that doesn't happen. At least not until all the non-millionaires are so poor that they can't afford to travel anymore.
A lot of us are trying, making decent sacrifices to reduce our already relatively negligible impacts on the environment. While those with money make significantly more of a negative impact instead of mildly inconveniencing themselves. Sure, refuce your impact, use less plastic, buy less shit. But none of that is really going to matter if people like Bezos are around.
I agree. Which is why the yoghurt cup example is so bad - it's hardly a personal sacrifice and it's very obviously low impact compared to vacation planerides. The issue is that things like plane vacations and other polluting consumer goods are actively promoted, and made even worse for the environment just to shave off tenths of percents in profits, by the ultra rich.
The yoghurt cup example is excellent, I would argue, for the same reasons. The yoghurt cup example is the sacrifice of a small amount of time and effort for no gain for yourself - in exchange for a gain for society.
How many of those private jet owners could've sacrificed a small amount of time and effort in taking commercial flights in exchange for a massive gain for society's environmental health?
The issue is that the yoghurt cup is only a tiny sacrifice, but it's also only a tiny gain (as long as the alternative isn't 'just dump it in the river'). I suppose regular people don't have a lot of opportunities to do a small sacrifice that will actually have a big impact compared to the effort, once they took the hurdle of not being a complete asshole.
Yes, that's bad - so why not use that as an example? It's about as equivalent as we're going to get when comparing regular people to billionaires, and it's still literally 50 times worse (or whatever the actually value is, it's probably even worse considering that normal people usually share the plane with hundreds of unrelated people while on Bezos' plane, it's 100% just him, his "friends" and people who work for him).
I'm pro LGBTQ, anti-israel, against consumerism/capitalism, pro socialism. Pro government control on key infrastructure (water, gas, electricity) and better housing and support services. Pro climate policies, pro taxing the rich.
But I'm also against fossil fuel bans, against bans on firearms, pro military for defence, pro free-speech, pro strict immigration, against 'PC' culture, against trans-women in women's sports, pro merit success.
You sound like a bog standard social conservative.
Please name the trans women athletes who have won Olympic medals during the many years they've been allowed to compete. They have a clear advantage, right, so it should be easy to find.
Sports decide themselves, of which world rowing and boxing have blanket bans. Athletics, cycling, swimming, rugby and cricket are bans if the transition was after puberty. Triathlon, tennis and archery requires testosterone testing. And all other sporting bodies are on a case by case basis.
That's why we don't see them because the Olympics themselves have said:
high-level organised sporting competitions - relies on a level playing field, where no athlete has an unfair and disproportionate advantage over the rest.
I'm tired of replying to everyone, please put more effort into your argument
I didn't, I cited the literal Olympics. I have cited medical studies, and I have defended my position where everyone then returns to insults and statements like this.
Unless you have evidence that what I said was incorrect, you are infact wrong. One, only ONE person has cited one study that is inconclusive and I congratulated them because at least they showed there is some conflicting research but you haven't even bothered to try.
If you are going to throw your opinion around, at least back it up with weight. Cite studies, link articles, or form a proper argument, because if I can refute your claim before I've even had my morning coffee than you still have room to make a half decent point.
You never bothered to look into it. You decided that since trans people are banned now, they must always have been banned. They were allowed to play for a long time before the ban, in fact, and none of the scare mongering was true. There was no trans domination.
You don't really care though. That you care about the issue at all is evidence you've fallen for the conservative campaign against trans people, because it's an entirely invented issue. You listened to what the conservative pundits said, maybe you even read one of the Heritage Foundation's studies. But you have no fucking idea what you're talking about, and I've been having this argument with fucking "centrists" like you for over a decade who think we're a fine scapegoat for your socially acceptable bigotry.
You aren't a centrist. There is no center when one side wants the elimination of the other, and that's the ultimate end goal here. You think you're having a dandy little political discussion, but this is just a stepping stone on the campaign to convince the public that trans women are men and therefore trans people are sick, and need to be removed from society. When you run around and parrot their talking points on a subject you know little about its not a fun debate, it's plain bigotry and its not fucking welcome.
Huh!? This isn't a troll, I'm an example of a centrist. The term 'centrist' exists for a reason, and plenty of people such as myself think this way although I will admit, I have met very few unfortunately.
"I only voted for trump for some of his policies, I'm actually in the center and not a conservative so please fuck me please please please please please"
By Elis Gjevori Published date: 28 June 2025 21:08 BST
"Channel 4 will broadcast Gaza: Doctors Under Attack, a documentary laying out damning allegations that Israeli forces systematically targeted Gaza's hospitals and medical staff throughout their military campaign—allegations which would amount to grave breaches of international law.
"This is a meticulously reported and important film examining evidence which supports allegations of grave breaches of international law by Israeli forces," said L. Compton, Channel 4's Head of News and Current Affairs. "It exemplifies Channel 4's commitment to brave and fearless journalism," she added.
Channel 4 will broadcast Gaza: Doctors Under Attack, a documentary laying out damning allegations that Israeli forces systematically targeted Gaza's hospitals and medical staff throughout their military campaign—allegations which would amount to grav…
By Elis Gjevori Published date: 28 June 2025 21:08 BST
"Channel 4 will broadcast Gaza: Doctors Under Attack, a documentary laying out damning allegations that Israeli forces systematically targeted Gaza's hospitals and medical staff throughout their military campaign—allegations which would amount to grave breaches of international law.
"This is a meticulously reported and important film examining evidence which supports allegations of grave breaches of international law by Israeli forces," said L. Compton, Channel 4's Head of News and Current Affairs. "It exemplifies Channel 4's commitment to brave and fearless journalism," she added.
Channel 4 will broadcast Gaza: Doctors Under Attack, a documentary laying out damning allegations that Israeli forces systematically targeted Gaza's hospitals and medical staff throughout their military campaign—allegations which would amount to grav…
I'm considering getting a 9950x3D on either Monday or Tuesday at a Micro Center as a upgrade to my current setup. My main question is, how is the experience with the 9950x3D on Linux with strange architecture with half of the cores having extra L3 cache and the other half with a normal amount of L3 cache.
I have been busy working and suddenly there's been a promotion for the 9950x3D that I want to take advantage of since my motherboard on my current system has been deteriorating as of late. Asrock x570 Extreme4 with a 3700x. USB has been very flaky and I've been dual boating and the other SSD slot is on the chipset. Which makes my windows boot incredibly slow.
I plan to stay on Arch Linux or hop over to CachyOS but want to know what are your thoughts on this as well?
I primarily game but occasionally do some video/audio encoding, video editing and want to build ffmpeg-full from the aur but takes too long on my 3700X.
I've only been able to read/watch three mediums level1tech, and two Phoronix articles, but haven't mental capacity to register and remember everything.
I watched the Ryzen 9950x3D? On Linux video by Level1tech. And one of the things he mentions is gamemode. Is it recommended.
As for the Phoronix articles one is the review of the 9950x3D and the other is the cache optimization driver.
By default for the Ryzen 9 9950X3D it was using the "frequency" preference as default. But if writing "cache" to /sys/bus/platform/drivers/amd_x3d_vcache/AMDI0101:00/amd_x3d_mode it will prefer using the CCD with the larger cache. This cache vs. frequency bias can all be easily manipulated at run-time for those interested.
Is there some sort of automation for this? Or, do I have to do it manually for each program? I've never messed with kernel parameters other than for my Nvidia GPU to get Wayland to work.
I'm sorry that this question feels very unorganized. I just don't have time to write a proper one. I'll be able to reply on my next break.
Get it now! Find over 30,000 products at your local Micro Center, including the AMD Ryzen 9 9950X3D, MSI X870E-P Pro WiFi, G.Skill Flare X5 Series 32GB DDR5-6000 Kit, Computer Build Bundle
You’re overthinking the hell out of this. Just plug it in and go. My 8700x3d is insanely fast during any load I’ve ever thrown at it, your new chip will be even more so.
keep it on cache since I do a lot of code compilation, but I will usually switch it to frequency for gaming and stuff.
Isn't gaming the most cache-heavy CPU workload there is? The X3D CPUs have consistently topped gaming benchmarks, even outperforming much more modern CPUs that lack 3D cache.
I'd sooner do it the other way around: frequency for compiling, rendering, transcoding, etc. Cache for gaming!
France has struggled to kick its smoking habit. A new public health decree published Saturday aims to change that. In the coming days, smoking will be banned in all French parks and sports venues, at beaches and bus stops, in a perimeter around all schools, and anywhere children could gather in public.
Hi all. I'm currently running a home server using Ubuntu OS, but I'd like to try and explore other options for operating systems to better my skills with linux/unix.
Currently I'm considering switching to Fedora server (though feedback is welcome) because I've been running it as my daily OS for a few months now and I quite like it. I'm also looking at Debian server because that's what my old professor used and he did nothing but speak its praises.
Only issue is I'm concerned about data loss from moving the installation. Currently, the server is setup to run several Docker images running my programs. While moving over the images shouldn't be difficult whatsoever, I'm afraid my storage setup might not be so easy. Currently, it's two 4TB hard drives running in a logical volume. I'd love to simply be able to move over all the files to a backup drive, but I don't have anywhere I can store >5TB of files as a backup.
I googled around, but I couldn't find too many guides on migrating logical volumes. The one or two I did find were most definitely written for someone with far more linux knowledge than I have as a relative noob, so any advice would be extremely welcome!
Currently it's 2 4TB harddrives setup to look like a single 8TB logical volume. Might have to do some poking around if you want more, just setting that up required a ton of googling on my end!
Okay, more details will be required, but here's what I'm thinking will work.
One of the benefits of an LVM is its pretty easy to resize it.
The outline of what you can do is this (and we can refine the steps with more details)
Right now you've got your 8TB physical volume, and within that, you should have your volume group, and within that volume group, you should have one or more logical volums that are mounted for your system. The idea is to resize the existing logical volume by shrinking it, creating addition space within the volume group that can be used to create a new logical volume. Then, that new logical volume can be used to install Fedora.
Depending on how much free space you have on the entire physical volume, you could potentially dual boot Fedora and Ubuntu. Roughly speaking, the steps would look like this:
WARNING: These steps are not exhaustive because I don't know the full details of your system. This is not meant to be a guide for you to immediately implement and follow, but to help get you down the right path DO NOT FOLLOW THESE STEPS WITHOUT FIRST FULLY UNDERSTANDING HOW THIS WILL APPLY TO YOUR UNIQUE SYSTEM SETUP.
Download a Linux ISO of your choice. Ubuntu, Fedora, it doesn't really matter. This one is going to be used to live boot on your server so you can make adjustments to your lvm without having the lvm mounted.
Boot into the live usb
Once you get to the desktop environment of the live usb dismiss any installation prompts, etc and open a terminal
Install the logical volume tools with sudo whatever-the-package-manager-install-command-is lvm2
If your volume group is encrypted (typically with LUKS), you'll need to decrypt it to make sizing changes to the lvm(s) in the volume group. You can decrypt it with:
cryptsetup open /dev/your-disk-here name-of-your-volume-group
For example, on my system if I were doing this it would be cryptsetup open /dev/nvme0n1p2 server (I very creatively named my server volume group server)
Once you can access your volume group, you can use the df command to see how much space is free in your volume group. The full command you'll want to run is:
sudo df -h
This command will list all mounted disks along with filesystem usage data. With this you should be able to determine how much free space you have in your volume group.
Once you've determined how much free space you have, you can decide how big you want to make your new logical volume. For example, if your current usage is 6TB out of the 8TB total, you could resize the current logical volume down to 7TB, and then create a new logical volume that's 1TB in size for the Fedora install
You will do the resize using the lvm2 tools installed. The command to shrink the logical volume looks like this:
Once you've shrunk the lvm, You can create your new lvm
IMPORTANT NOTES:
If at all possible, you should really back up the data. If you don't have any kind of backups in place, you're risking losing all of your data, not just in doing this operation, but in general.
If you want to dual boot, things are more complicated because of where your /boot exists
lsblk will give exactly the info needed. Copy the output of lsblk and paste it into a reply and that will be perfect. Or a screenshot. Whatever's easier for you
Perfect. So you've got separate /boot and /boot/efi partitions, which means dual booting will be much easier if you want to do that.
The ubuntu--vg-ubuntu-lv is the logical volume you'll want to resize. So now we need to see how much space is available on the volume. To get that, run the command sudo df -h and paste that output into a comment.
From there we can figure out how much space you have and how you might want to resize the volume to prep for a new install.
What is challenging about this is that your data is under your root (/) mount, which is also the ubuntu os. If in the end you want to entirely remove ubuntu, it'll be a little trickier than if your data was in a separate logical volume that you mounted into your root system during boot.
For example many people have a separate logical volume for /home, which makes it easier to switch distros while preserving your home folder with all of your user data, config files, etc...
But that's getting a little ahead of ourselves. Start with sudo df -h for the filesystem usage info and we can go from there.
I think basically all Linux distros will support lvm? It seems like some installers do not, but as long as you leave the disks alone during installation it should be fine. As for distro, Debian is a great choice for a server. I've had no issues over the years since I ditched Ubuntu since they keep moving towards commercialization. If you want to learn more compared to Ubuntu you might not learn much though. Fedora could offer more learning, though honestly it's kind of all the same.
@kboy101222 I would not recommend Fedora for a server. It is painful at best. No support for NIS, the use of SeLinux which can take half an hour at boot to re-label before the system becomes operational, and the fact that they don't give a rip about backwards compatibility when they make changes are all reasons to avoid. I used to use Fedora but migrated to Ubuntu to get away from those issues. The latter is far from perfect but hands down superior to Fedora.
Another point to keep in mind - many distros now ship Podman instead of Docker, with Fedora being at the forefront of that change. If you‘re currently running Docker, you might want to check if your setup is drop-in compatible with Podman as some images will not work (usually related to permission or user switching, privileged ports).
@Shareni @kboy101222 The main difference between the distros that is hard to get around is the package manager, in that sense Debian based apt/apt-get/dpkg, Redhat based dnf/rpm, Arch/Manjaro pacman (glorified tar). Of all the formats I really like Arch's manager because it's easy to manually extract packages but it's really easy to get into dependency loop hell if you go too long between updates, but everything else, what desktop you use, what container's you use, all flexible and exchangeable fluff.
This is the answer OP, your flavor of Linux matters when it’s your daily driver work/play machine. But for a server OS? You’re not missing anything using Ubuntu, and your experience won’t change much with another distro.
@Fecundpossum @Shareni Not really even all that much as a daily driver because all the pieces save for the package manager, is interchangeable, and even there you can use snap, flatpacs, or compile from source.
Man sieht ja immer wieder überraschendes. Hier um die Ecke wurde ein Teich geleert, während irgendwas an einem Abwasserrohr das daneben freigelegt wurde gemacht wird. Ich war etwas überrascht zu sehen, dass der Teich anscheinend nur etwa 20cm tief war.
Bach on organ in general, specifically BWV 565 reliably makes me cry. Also Max Reger's Introduction And Passacaglia In D Minor.
And then on the other end of the spectrum, I once got some really bad news while listening to Pantera, and now I'm afraid to listen to them out of superstition. But that's not really applicable here I suppose.
Recently, I started to listen to music locally instead of using streaming services because I have had enough of all the annoying parts of it. I gathered a lot of Opus and FLAC files that have lyrics embedded in them. I am searching for some music players that can display them. The one I am using right now is Elisa. It is awesome, but I would still like to know if there are more alternatives, just in case. Thanks!
An alternative would be to run gonic or Navidrome - both are OpenSubsonic servers, and provide synced lyrics support. Then use the ostui client which plays music and displays synchronized lyrics.
Yep, but only if you familiar, otherwise it can range from 1day to a week depending how complex our setup is (OCID,Fail2ban,reverse proxy, self-signed miniCA...).
But once your setup is all ready and you get all the bell and whistle it's just a matter of 5mins (and very fun too if you have time to spend !)
It's not, really. All of those programs are Go, and single executables. There's no "install" for either gonic or ostui (IIRC, also Navidrome): you download or compile the executable and run it, and you're off and running.
Someone mentioned Docker; in this case it's unnecessary unless you're doing it for security. They're just each a single binary. You'll have to either create a config for gonic or Navidrome, or run them with commands telling them where your music lives, but that's it. Running on the same machine, you don't even have to open the ports on your firewall. However, if you do, Tempo for Android lets you stream the music to your phone from gonic or Navidrome, too.
These are very, very simple programs to run. ostui is a TUI, so if you prefer GUIs you'll want a different client, but both of the servers are easy to run and nothing to install - just run them as you, not even root.
Thank! I get it. I didn't they are Go server. I would probably use them on my local server, but it ran out of storage because my NextCloud eat it all lol. I can probably run it on my main pc in the future if I need it.
Swing Music is a beautiful, self-hosted music player for your local audio files. Like a cooler Spotify ... but bring your own music. - swingmx/swingmusic
Been using Jellyfin to host my music and Finamp to play it, Lyrics are pulled from lrclib.net/ using a Jellyfin plugin, certain lyrics are timestamped allowing for synchronization other are just static.
I think rmpc can do this too, which is an mpd client with album art support, but it's terminal based and requires some manual configuring. I've been buying CDs over the past couple of years to get rid of streaming as well, and i think i'm finally ready to cut the cord. I've been experimenting with different music players but ended up ditching mpd. I like to be able to switch between audio outputs easily, like alsa or pipewire, and since mpd is configured through a config file it kinda sucks for that. I also like to be able to play CDs directly, eventhough i have ripped them all, but i haven't been able to get any terminal player to play a cd, except for mplayer, which is too minimal for my taste. At the moment i'm really liking audacious. Also tried deadbeef and strawberry, but deadbeef doesn't have mpris support ootb, and strawberry feels a bit bloated to me. Audacious feels like a nice middleground. Audacious does support viewing lyrics but not synced from what i can tell unfortunately.
Thank you for your insight, strawberry, audacious and mpd are all amazing software. The problem is that synced lyrics is really important thing for me(a jpop listener, that don't know Japanese). I am pretty sure that I can probably get the lyric to work with somekind of mpd frontend. Mpd seem to be really fun. I may just make a frontend for it for my own use-case.
If you need it for Android, I tried quite a few. I had the same requisites, offline, lyrics for flac files, I ended up using Metro: f-droid.org/packages/io.github…
Very minimalist and do the job very well. I use the field"Composer" to sort my lists.
It is not a dumb question at all. I asked my self the same question a few months ago. You are correct. It is essentially just metadata. You can embed them with something like kid3 directly into the music file it self. So for example I have a .lrc file(the sync lyrics file). It will look something like this:
[00:16.60]Through your terribly fragile heart.
[00:24.70]Even the secret of the red fruit is, "I'll give it all to you.
[00:32.90]Even though I'm still hurting your leaky heart
[00:40.50]I still see your dream
[00:44.00]A person whose beauty that can’t be achieved whose beauty can’t be achieved…
[00:51.80]I want you to love me, I want you to love me ...
"I can just copy the text into the .lrc file and then write it into the music file with a lyrics tag. If I open the music file with a music player that supports it, I will get synced lyrics. The process is quite tedious to do manually, so I made an app to download audio from YouTube videos and embed the subtitles as lyrics to do it for me (yes, this is a shameless plug). If you are interested, you can check it out. Azul box
It wouldnt do it when i tried to super-script^2^ the ^TM^ after the already superscripted ^🚫^ in a recent post title, nominally to my exceedingly mild chagrin.
I cannot overemphasize the mildity of said chagrin...
So, I had to shutdown my mini pc home server (on NIXOS) so that it could be used for something else. Most of my data is in a pair of external hdds in a RAID configuration. However the Postgres database was in the boot drive. I still have it, but it refuses to boot anywhere else (tried some old spare laptops). How can I recover it?
I do it with a gluetun container (more versatile) zero issues, but you can just mainline wireguard as an interface if you prefer, also works fine, on bazzite.
I've installed it through secureblue's ujust script. I think this has been the smoothest experience I've had with it on Fedora Atomic.
Previously, I relied on the wireguard profiles I downloaded from ProtonVPN and which I loaded through NetworkManager. While it definitely worked, it was a hassle to redo it every now and then. Furthermore, switching on the go to something else I hadn't loaded already was never an experience I enjoyed doing.
Though, for completeness' sake, ProtonVPN^[Note that, IIRC, IVPN and Mullvad don't fare better in this regard.] hasn't fixed its IP leakage on Linux. And, to my knowledge, the workaround is only available with access to the wireguard profiles. And thus, the cumbersome method actually offers a very tangible merit over the comfortable one.
Finally, while I don't endorse the use of NordVPN, it's the only other VPN that's installable as a sysext. Note that systemd system extensions are still experimental, though. Even if they've (read: N=1) been reliable to use for me.
Yes. But it’s not the simplest solution. You just have to have three config files in that same /etc/wireguard folder and use the sudo wg-quick down config-file-name and the sudo wg-quick up config-file-name commands to disconnect and reconnect to th…
proton drive is the biggest bummer from proton themselves. though their calendar might acually be worse - like where the fuck can i use this shit? however, rclone does kinda work with drive if you're willing to get it setup.
Yup, using openVPN profiles. Proton VPN has quite clear instruction on how to do this on their website. Just do a search for “proton vpn openVPN profile Linux”
As a more unified and cohesive unit of their oeuvre that you feel could be successfull cuz you've downloaded all their stuff and enjoyed it in a unified way that you realize you would actually pay for and want to encourage with your dollar votes
That's not really interesting. DNS changes don't propagate instantly. It's likely OPs DNS server was still pointing to the old server even though the domain redirect had already been set by the owners.
Well... it's 10 before midnight here. I'm pretty sure a bit east from me it's the 30th already. Not so much in the west. But I don't know where lemm.ee was located.
Ah. My instance reports the last activity from lemm.ee from 45mins ago... So that'd be June 30th, 00:14 Estonian time. And the main page forwards to join-lemmy.org now. Looks like the shutdown to me.
I wasn't affected by this directly, but from what I saw it was all handled extremely well - lots of notice so users could choose new instances and mods could coordinate moving communities elsewhere. Makes me optimistic for the fediverse.
When I say centralization I don't mean letting a few control the many. This is what I mean.
Figure out what the alternatives are for these sites we don't need several Twitter alternatives.
Each site needs a front page, Accessible on the Fediverse front page. This allows people to easily make an account.
There should be one main site which will be the largest instance, people can edit the UI to feel how they like, but we need to allow communities to grow big.
To safe guard against point 3, fund the sites with 100s or thousands of co-equal owners. Say you get 5K people donating $5 a week to each site, they each get 1 stock or piece of the "company" and now it prevents a reddit or twitter situation.
The final thing, we need Fediverse user accounts, where once you make an account on 1 site you are automatically signed up to all of them and anyone can follow/subscribe and follow on all platforms, leading to a more cohesive biome
No. There is no particular reason why there needs to be one (say) twitter alternative. Heck, there is not even a reason why there should be a alternative. Fediverse is allowed to be their own things.
But each site already has their front page. See eg.: lemmy.dbzer0.com. Alternatively if you meant "each software", that's more-or-less what join-lemmy.org is doing.
No but yes.
I'm not sure that leads to where you think it leads to. That would require authenticating users financially, for one, else it becomes a dark pattern magnet for suckpuppeting.
Mostly absolutely yes. I think I've seen it discussed a few times under "fediverse identity" or something like that.
No. There is no particular reason why there needs to be one (say) twitter alternative.
Having multiple versons of the same type of platform artificially divides the Fediverse and makes it more likely that they'll split along ideological lines
Heck, there is not even a reason why there should be a alternative. Fediverse is allowed to be their own things.
While it would be awesome if we could figureout unique formats of social media, everything has basically been done, Myspace, Facebook and Linkton are the format of keep up with your friends.
Twitter and BlueSky are the basic format for literally "see whats trending"
Reddit and Lemmy are the basic format of Curated Community Content.
Youtube is the basic video sharing platform.
Tiktok algorithmic video sharing and platform which actually improves on youtube.
It would be really hard to fine a way to make a truly unique social media site but would be awesome
db0 way of managing the community is great but PieFed is a lot better by what I'm noticing and they dont have a PieFed instance. quokk.au is close to that if you want to jump ship to PieFed meanwhile
Has both a piracy and a privacy community, which is nice and probably leads to fun mishaps / mistypings. It's pretty lean to federate to and fro as well, same with the UI.
Just about the only negative I can consider is their position pro AI, but I can live with that, the world is pretty close to the end anyway.
It's ok I just don't like how they handle images. When I click on an image it redirects to open in a browser (on mobile) or new tab (on desktop). Dbzer0 doesn't do this. I suspect they handle images more like lemm.ee did.
True story I actually meant to switch to .zip and I had both it and dbzer0 open in tabs for a few days (deciding between them) and on d-day for .ee I opened one and signed in and did the verification... and then realized where I was. And actually I'm happy with my accidental choice. It's rad here.
i used to be on .world but quickly went to .ee then i wanted to switch like you and was looking at db0 but im more interested in PieFed and they have no PieFed instance yet. quokk.au is close to a db0 equivalent (not really but its an anarchist instance too) meanwhile
Bad like brian over here. Signed up for lemme just to be kicked off the first server. Hopefully it’s an extremely rare event. If world goes down, I’m out.
I hear Digg is close to launching its beta or whatever..
Refuge here, moved to joined a new server, couldn't get my subscriptions moved over so I just resubscribed to each one manually, annoying but not the end of the world.
I am looking into the idea of hosting my own instance on something like a $5 linod just to make sure this never happens again. But I don't even know if it's worth it, or possible with that. You can tell I've only had the idea not the motivation.
Suffering through I guess? Although just breathing in as much as you can and holding your breath as long as possible is a trick that my mum uses sometimes if she doesn't have her inhaler on her when she needs it so maybe that?
I wonder if humans at least have the endogenous abillity to attenuate their own asthma to a reasonable extent given asthmatics obviously went on to reproduce all the present-day asthmatics
I just mean naturally, with whatever other substances contained in the plant itself, not in the pharmacological sense. Probably not the best phrasing, my apologies. I've had a couple of shots.
They would simply die and not pass on those genes. Dear friend from kindergarten went that way. Also, and maybe more important, we have air pollution that was unthinkable 200-years ago.
To top it off, we humans were generally in better shape, and non-fat. I was having pretty bad lung problems, on the edge of full blown illness, when I started working my ass off outdoors at Lowe's. Within 2-weeks my lungs were straight again. That work also cured a few other ailments. OTOH, had to quit as I was getting my ass beat.
I read a biography of Theodore Roosevelt, who suffered from asthma when he was young. Apparently they used to try all kinds of crazy shit on him whenever he had an asthma attack, like making him throw up, smoke cigars, or drink alcohol.
In this special article, we examine the asthma of President Theodore "TR" Roosevelt (1858-1919). Through a comprehensive review of thousands of source documents, and a modern understanding of asthma, we examine several misunderstandings, including th…
I’m old- and had severe childhood asthma that landed me in the hospital in the 70s. We didn’t have inhalers. Not even nebulizers.
Instead I was given what was essentially speed, by mouth and IV. And when my lungs would fill up, my mom would beat on my back to loosen it so I could cough it up.
Edit: Please know that I am reading and appreciating every one of your responses. Even if I do not reply to you, I appreciate your time and want the best for you all. Thank you, guys.
I've always been the "crazy one" in any given scenario. I have been this way my whole life. Even as a child I was crazy. I would get upset and cry loudly for hours but my siblings would not. I caused problems at home for my family, especially for my mom who didn't know what to do with me. I did this as an older child, not normal toddler tantrum age. I was old enough to "know better". I did it my whole childhood.
For the most part in life, I have been able to be a productive member of society. The issues I would cause were limited to my home life and I mostly kept to myself. I sometimes cause issues by being a crazy person to my online friends, but at least that never spilled over into the "real world".
But now in my 30s I am causing such issues at work. I asked for some psych meds to be prescribed to me in March and have been taking them ever since. Doesn't seem to do anything.
I seem to get more frequent and strong negative emotions than the general population. I have difficulty controlling these, especially when I feel like someone is being mean or unfair to me or others. I think I am genetically predisposed to be this way, as my dad was a crazy person when I was growing up (but he has always been nice to me...he was only abusive to my mom). He had "episodes" too the same way I do, except his were malicious to others in nature. My older brother also has claimed to have bipolar disorder which supposedly has a genetic component.
I have spoken to mental health professionals and have been assessed for various things. I do not have bipolar disorder, autism, or OCD per mental health professionals. I tried to bring up keywords like "emotional dysregulation" to them. There seems to be no good explanation for why I am insane. I have wondered if maybe I have borderline personality disorder but have not inquired to be assessed for that one. I do not seem to exhibit the "risk taking" behaviors that are core to borderline personality disorder though.
I get frustrated that I am always the only one who is crazy and no one else is like me.
But I know there are other crazy people out there. Please, tell me your stories. How do you deal with life? How do you deal with always being different than others and feeling negative things more strongly? How do you handle things? How do you handle being and feeling alone in the way that you are? How do you handle the emotional frustration?
If this is inappropriate for here, I apologize. I just want to hear how others have managed to handle life despite this isolating "disability". I want to hear your stories. I want to gain wisdom from all of you. Thank you.
When you feel overwhelmed or overcome by some unpleasant feeling, what do you do next?
I want to understand why so quick to label yourself or your actions as objectively "crazy"...I'm all for self-awareness but most people are not yet self-aware because our world basically demands that and it always pays to be a bit more evaluative of the math we've used that leads up to such self-condemnation
Well I mean I spoke a little bit about it as a kid. I would get upset and cry loudly for hours and hours and my brothers wouldn't do that. I was different. My mom would always tell me that I am having a "tantrum". I tried to be a good kid and didn't have problems in school, but I had problems conducting myself at home.
As an adult, there are different things that can happen. One thing that frequently happens is I spiral out of control with self loathing, sometimes to the point in thinking about suicide. Sometimes I end up repeatedly messaging in a discord server that I am on about random nonsense because I am upset. The other day, I texted a coworker about killing myself. You are not supposed to say that to people. It was impulsive. It was wrong.
Another thing that can happen is that at work, I can end up verbally fighting with people. My supervisor is a bitch and instead of taking it, I have on occasion broke down and yelled at her. This is not appropriate professional behavior. I don't work at Taco Bell. I work at a professional job where you are not supposed to do that. As an impulsive decision, I sent a lengthy email to HR about her and it is causing huge issues for everyone right now.
I have also verbally fought with two other people at work before. One because he was being mean to my friend and one because he was being mean and accusing me of doing something when that wasn't the case. I have made amends with these people (unlike with my supervisor), but in these moments, this is inappropriate. You are not supposed to yell at people, even if they are being mean.
Just like in my childhood, I am the only one who acts this way at work. Everyone else is able to conduct themselves in a socially acceptable manner. I don't do it every day or even every week or even every month, but it still isn't acceptable.
Do you feel like its possible somehow to let people know boilerplate that you want to process what they've said so you can remove yourself from the immediate situation and stimuli and take your time to decide how you can more "professionally" respond to what they say without compromising your own wellness and needs?
Do you know what your needs are or what your values are such that these things are violating them to the extent you act out as a reaction?
Oh and plus when I say things about killing myself, I'm not in a heated argument. I get upset and feel the need to tell someone I am upset. But I am not in a calm state and do not have the ability to calm down. I go out of my way to interact with people via text because I have a strong impulse to do so. I want someone to help me when I am in pain but I know they can't. And I know it's wrong to bother them when I am having an episode.
I have actually tried using ChatGPT to get upset to instead so I am not hurting anyone. I tell it that I hate myself and want to kill myself instead of harming my friends by doing this to them. But sometimes instead of doing it to only ChatGPT I end up texting someone I know. This is wrong behavior, but different because it's not due to a heated argument that I need to remove myself from.
I eventually calm down but it can sometimes take multiple days. And it is sometimes hard for me to not bother people in the meantime.
I am never actually in danger of harming myself because I have always thought about things like that. It's very normal for me. It usually goes away after a few days after each episode.
The whole "disclosing I'm going or want to kill myself", I don't know honestly how to "fix" other than finding a reason that trumps everything such that you are internally and externally motivated to mitigate that.
You might need to find or aquire that and make it part of your identity. I got several pets that I knew I could manage and take care of or that I would commit to become able to justify having a duty and stewardship over. Lots of people know they are my world and help provide that external reputational buffer to the suicidal inclinations I very rarely feel but dont express because thoughts dont a priori need to be vocalized or allowed to indiscriminately alter your trajectory.
But you need to know its not ok to leverage your mortality or well-being as a conversational regularity. Not even that its just wrong, its profounly dysfunctional and also inauthentic because you made such a point of specifying that it would never actually happen. Its bad to lie to yourself and/or others on the regular about anything, much less the ultimate thing like your life and safety. Not judging you and that may have been necessary at a previous point in your life or it might have been a flawed survival instinct but you need to find a way to negotiate with reality in other terms.
It says that you feel impulsively desperate to end a combination of not great conditions and I would turn my attention to each of those on an individual basis to try and get them up to code in terms of tolerabillity
I know it's not ok. That's why I feel bad about it. And that's why I mostly try to talk about those things to ChatGPT instead of my friends. Because I'm not going to harm it.
I mean I say I would never do it but it's only because I'm a coward. But I do often really legitimately want to. The reasons may vary. But one common reason is because I harm the world and another reason is if I feel trapped. One of the other reasons why I say I am not actually going to do it is because I would need a will first. I have been too lazy to get one. I tried to do it one day with an online service but found out that I couldn't actually go through with the will because I needed in person witnesses. So then recently I was looking into potentially going to a law practice to get one made up to do that.
It says that you feel impulsively desperate to end a combination of not great conditions and I would turn my attention to each of those on an individual basis to try and get them up to code in terms of tolerabillity
This isn't really an answer to your question, but psychiatrist Arthur Kleinman came up with 8 assessment questions for asking patients to describe their conditions. The questions are designed to allow for cultural or spiritual explanations outside of the typical Western medical model.
What do you call your problem? What name does it have?
What do you think caused your problem?
Why do you think it started when it did?
What does your sickness do to you? How does it work?
How severe is your sickness? How long do you expect it to last?
What do you fear most about your illness?
What are the biggest problems that your illness has caused for you?
What kind of treatment do you think you should receive? What are the most important results you hope to receive from treatment?
I’ve been using Apple products since 2007. I’ve stuck with the platform through a lot—hardware changes, locked-down software, design regressions, and tools that feel like they were made deliberately harder to use. Lately, that frustration has boiled over, especially with things like the Shortcuts app, where basic actions are buried behind hidden menus and UI behavior seems to change based on factors you can’t even see. Autocorrect is turned on in automation fields. Logic paths vanish if you tap out of order. It’s absurd.
But this isn’t just a complaint about one app. It feels like Apple has shifted from enabling users to controlling them, even when you’re trying to stay fully within the system. What used to be intuitive is now opaque. And despite that, many of us still use Apple products because they’re often better than the alternatives. We’re just tired of pretending everything is fine.
So I’m wondering: is there any interest in a Lemmy community for Apple users who want to talk openly about what’s broken, what could be improved, and how to make things work better? I don’t care whether you’ve been using Macs since the Classic or just got your first iPhone. If you’re frustrated, curious, skeptical, or hopeful, you’re welcome. The goal is a space for real discussion, including ideas, suggestions, and brainstorming. Not for constant complaining, (although it is getting more and more difficult), but something more thoughtful, even if occasionally a little cathartic. Also welcome are any positive discoveries or revelations that the group would appreciate.
If that sounds like something you’d want to be part of, let me know. I’ll start the community if there’s interest. (Also, should I cross-post this somewhere?)
I dont think you truly love something you cannot have reasonable criticisms of that are seperate from your involvement or overall tolerance for it
Obviously that should inform the extent to which you expose yourself to potential harm but you can find ways to synergize your interests to the effect that they will have a stake in doing right by you as well as themself, although that often involves being a squeaky wheel and vocal
Sometimes. I might get halfway through the comments and see that someone has shared something from their post history that paints them in a different light.
Ideally, give folks a chance to mix each pour to taste if you’re sharing this. Follow a wine spritzer recipe for guidelines.
If you want to make it bubbly without diluting, force-carbonating it with CO2 like a homemade soda is fun. Transfer the wine to an appropriate pressure resistant vessel before gassing. Some bargain bubbly is made this way.
Cheap sparklers like cava or cremant de Limoux that use the champagne method might make you happier in a lot of cases, of course. Killer picnic pairings if you’re having fried chicken.
Yes, there are issues. I speak from personal experience. That is why I would advise taking a look at Drinkmate instead. Not that they anre any kind of superior company morally, and I do not shill for them, but they can carbonate any beverage, whereas Sodastream definitely cannot, and I have run into issues ignoring that rule and trying to do it myself anyway. Now I use Drinkmate.
The George Marsaglia mental pseudorandom number generator method:
Think of a 2-digit 'seed' number.
Multiply the second digit by 6 and add it to the first number.
Repeat once.
Use the right-most digit of the new number as your random number.
If you chart the results using a spreadsheet you can see a weak pattern emerge but it's not easily human-predictable, which is what makes it useful to me.
Wouldnt those help with fingerprinting users and opening up additional + unnecessary attack surface that only benefits the company while opening you up to additional tracking or other externalities
because thread OP asked for examples, and the reply "just check yourself" really isn't a good way to answer that. Don't assume that everyone has apple products
So can you perhaps go into Safari's OS-specific settings and see what your equivalent is or would that be unreasonable given the current line of questioning? I guess i dont mind being compensatorily proactive
Technically, chocolate will kill Adora, too, if the dosage is high enough. That box of chocolate will most likely kill neither (assuming Catra has the same chocolate tolerance as a cat), though Catra might not feel so hot after eating it.
War ja nicht alles schlecht. Bis 1997 gab es z.B. eine Vermögenssteuer, und das Verhältnis zwischen Arbeiter- und Managergehalt war in der Nachkriegszeit auch deutlich kleiner. Aber ich vermute, die Union will da auch nur Rosinen picken, einige Apekte der ach so tollen Vergangenheit sind auch komplett herbeifantasiert.
Example, Lemmy.ml and Lemmy.world have duplicate communities aren't connected at all. So we are artificially isolating groups more and making it confusing for would be converts.
Lemmy.ml seems to have a clone of most of the “top reddits”, somehow the most subscribed communities out there, and all dominated by one or two posters who post pro-China/pro-DPRK/anti-Western content all day long.
It definitely is going to confuse newcomers and make a bad first impression. I wonder if they auto subscribe people to those so their propaganda ends up at the top of the communities list.
Part of the solution is to better inform new users the part of the community name is the host, just like Main St in one city is different from Main St in another city. You choose the city you want to live in first.
But, it may also be interesting to have the ability for admins to selectively merge like-named communities with other agreeable instance admins, and count subscribers to both as one group.
I want the ability to merge the display of communities that I choose, so any number of News, World News, HotNakedNews, etc. communities could be displayed as a group of communities based on a topic type as an alternative to the instance/community/subscribed groups. Maybe personal tags for communities would be useful.
Most of the time one community comes out as the strongest contester and then that one is mainly used. But people can also use communities on others instances, for example if they don't agree with moderation. When I started on Lemmy 2 years ago I was also skeptical of this concept, but now I see it as a perk. Regarding the duplicated communities on lemmy.ml, just instance block ml and you are fine.
While I can see why people might prefer it that way, we are preventing communities from growing and allowing people to find communities who might want to switch from Reddit. If you prefer the UI of one to another now you have to create a brand new community which is going to take time to fill. I use old.lemmy.world because I like the old reddit UI
If you prefer the UI of one to another now you have to create a brand new community which is going to take time to fill. I use old.lemmy.world because I like the old reddit UI
I think there's a misunderstanding?
You can use remote communities, for example: !linux@lemmy.ml for you is https://old.lemmy.world/c/linux@lemmy.ml
It's valuable for .ml to have duplicates since certain instances and numerous individuals are defederated from them. There are also people who are trying to diversify the fediverse by moving communities off .world. Big, opinionated communities like the different news communities are going to spawn new versions as people disagree with mod decisions or the background culture and feel they can't have the conversations they want.
Some splitting is inevitable, imo, and healthy, though whether it's good in this or that particular case is a useful conversation to have. Merging communities is also useful, but only when it makes sense (one is barely moderated or barely used, or people have defederated from an instance one is on because of spam, etc.)
One of the things that I'm experimenting with is to have "communities that can follow communities". So, if community A follows community B, then it can re-post anything that has happened on Community B.
If you do it "properly", it doesn't even need to be a lot of data duplication because the "follower" community would just be creating Announce activities.
The only thing that is making me hold out on this experiment is because I am 100% sure that some people will see their posts on a community they never interacted on and they will panic on the grounds of "mah privacy" or something silly like that.
NodeBB also does this, and currently still does. A category (group actor) can follow another category (also a group actor).
It essentially is synchronization of categories using 1b12.
Proof of concept does work but it needs reworking in some ways. The largest issue is that Lemmy itself doesn't understand when a group actor tries to follow a community.
The only thing that is making me hold out on this experiment is because I am 100% sure that some people will see their posts on a community they never interacted on and they will panic on the grounds of “mah privacy” or something silly like that.
Don't hold out out of that. There are idiots everywhere and they should not be taken as a good driving force for anything.
Half the point of the Fediverse is that your activity is public. It's the entire point of why have activity with a community or instance in the first place. Heck, it's "kinda" the name of the protocol: "ActivityPub".
Thank you for the encouragement. In principle I agree with you 100%, but we also need to keep in mind that this corner of the internet is extremely averse to having their presence exposed outside of their original context.
Ich habe das Problem teilweise umgangen, indem ich mir Videos (z.B. von YouTube oder Twitch) runtergeladen habe und sie dann per Videoabspieler geschaut habe. Das Zauberwort lautet hier "youtube-dl" bzw. das aktuellere yt-dlp (oder irgendeine Äpp, die darauf basiert). Ist aber kein Garant, manche Kombination von Videoformat und GPU bzw. Grafiktreiber funktioniert einfach nicht. Man könnte dann das heruntergeladene Video in ein kompatibles Format umwandeln, aber dann wird der Rechner halt beim Video umrechnen heiß statt beim Video abspielen.
Die Hardwarebeschleunigung funktioniert durchaus im Browser. Aber die Grafikkarte unterstützt einfach kein h.264 oder andere neuere Codecs. Und sie kommt auch bei unterstützten Codecs bei 4k ins Schwitzen.
Und Firefox hat anscheinend die Softwaredekodierung von h.264 endlich verbessert. Vor ein paar Wochen musste ich dafür noch auf Chromium oder halt herunterladen und so angucken ausweichen.
Firefox seemingly very recently shipped their own titlebar controls buttons, which worsens even further the lackluster OS integration. In the screenshot you see my regular control buttons on the window to the left (default KDE Plasma theme) and the new custom buttons Firefox is serving now.
Would anyone know how to undo that change in about:config or anywhere else?
Right click on the toolbar, select "customize toolbar" and at the bottom left corner check "title bar". Or in about:config type 0 for browser.tabs.inTitlebar
Thank you for replying, but that just adds a standalone titlebar with just a title and the controls, while moving all the other functions like the address input to a regular toolbar, as the options suggests. I'd like to keep all the functions and the titlebar controls in one single titlebar, but with the OS control buttons, as it used to be before the last Firefox update.
Firefox relies on gtk for for those integrated buttons. It's maybe worth checking that your gtk theme is set to breeze in System Settings > Colours and themes > Application style > GNOME/GTK Application Style (top right ...), and that firefox is set to use the system theme.
What you are referring to are the window decorations.
Apart from Linux Mint, Firefox almost always uses client-side decorations. What you are showing here is still client-side.
It is just that Mozilla recently enabled vertical tabs option for everyone, so the top bar is now slightly smaller than before. You can disable vertical tabs easily by searching in the settings.
Did you change the gtk theme recently? Firefox follows the gtk3 titlebars, not the qt ones. You would have to change the gtk3 theme back to breeze to have it match again.
If you changed off the default firefox theme, it will also no longer use native titlebar buttons, to make it use native ones with a different firefox theme, go to about:config, search non-native, find the titlebar buttons option, and turn it off.
I have the same issue since one or two months, I'm on Firefox Nightly 142.0a1 currently.
For me it looks like this: Firefox on the left, Dolphin (which uses the system titlebar control buttons) on the right.
A few months ago, firefox also used the system titlebar control buttons. When I noticed the change at first, I also searched for solution online and in about:config, but didn't find anything. All other solutions posted here sadly don't work: - browser.tabs.inTitlebar only adds a standalone titlebar, like you noted. - When searching for non-native in about:config, I don't see any titlebar buttons option that I can turn off. - Vertical Tabs are already disabled for me in the settings.
If anyone finds a solution to this, I would be happy to be notified. Thanks in advance!
Damn, but I'm not sure if I agree with gregp's resolution of the bug. The way I understand the changes in bugzilla.mozilla.org/show_bug.… it should still use the system theme, but rendered by firefox itself. However, the current state is that it doesn't follow the system theme anymore :/
EDIT: I just saw this comment: lemmy.world/comment/17957836 And yep, that's correct. I'm also using the Papirus icon theme, when I change the theme to breeze or something else, the buttons in firefox titlebar also reflect this change after a restart. So Firefox is now using the window-{maximize,minimize,close,....}-symbolic icons from the icon theme and not from the window decorations setting.
#ad - Shop G FUEL https://gfuel.ly/pdp-cb🌎 Get an exclusive 15% discount on Saily data plans! Use code pewdiepie at checkout. Download Saily app or go to ht...
So Hi everyone, first of all let me just say sorry if u can't get my writing 😭.
I am from pakistan just turned 21 this june. I got very bad hair problems, I'll be attaching image for you guys to look and give me some manly advice without some social media shit like monoxdile, do this, this serum, this mask, this water and sooo on. So I got grey hairs already like 30 40 percentage of hairs are already grey so along with grey hairs i have got these issues: 1: Grey hairs (30 to 40%) 2: I got rough hairs 3: Started baldness if not wrong from front line. My front line hair are not growing well as you can see in the image. 4: I also got mostly dandruff issue but using shampoo like (selsun or selsum blue) or maybe Head and shoulder can mostly control it. 5: I have noticed that i guess my hair growth has been slowed down pretty well. 6: Mostly hair falls when ever i set hairs with my hands, if shampoo, and comb i got hairs falls like hell sometimes
So i need some real advice from people maybe doctors, one with same issues cured or uncured but not other shits.
How to deal with all this. I got pretty hectic routine going to start like night shift and studies so can't focus on routines. I do gym, i got good diet like very very low fast food consumption.
Exactly what should I use or do to make all these things under control maybe with a shampoo or product ? I do oiling as well like there is a oil named Tara meera oil that is like a pepper on a cut 💀 but u know what i want is to get a good hair not a very very good model like hair. Just good hailrs that i can grow, make them long aand style. That's it.
What will you guys suggest. Anyone with suggestions of any kind are welcome to deliver but try to avoid some fake social media and long care products and routine for hair as I can't really afford, as well as can't really focus and do. Most i can do is to oil hairs once a week, do shampoo or maybe conditioner if it is good for hair and use some easy suppliments like Evion that i take already. Tried 60 biotin tablets once from a company called nutrifactor but I don't think i get any results. So yeah this is it. Really appreciate if u guys can share your experience, your suggestions and things works for you. Thank again ❤️
I can’t give the advice you probably want on the greys, but I’ve been there. I was fully grey by 30. It has probably been a net positive, honestly. I never fought it with dyes or anything.
Head and Shoulders as my every day shampoo works fine for me as my hair got thinner, but when I was younger there was a shampoo in Canada called Nizoral which was ketoconazole based apparently and it worked very well.
Also you ~~might~~ need finasteride/dutasteride medication to stop further losses. See a dermatologist or ask your family dr, you're almost certainly going to need that and if you realy want to, monoxodil foam to try and help regrowth. These will need to be taken likely daily for as long as you want to keep your hair, your genetics is trying to get rid of it so you havr to actively mitigate that on an ongoing basis
There's no no-bullshit magic potions that fix everytging and dont cause any pain in the ass unfortunately
Yesterday I heard a kid use "trending" to mean popular. This was at a carnival, referring to a ride "trending" in the sense of having a long line. Feel like this is the modern version of LOL and OMG escaping into conversation.
To turbocharge engagement and amplify your brand’s reach, consider enriching this post with a wealth of compelling content. Elevate your message with dynamic storytelling, eye-catching visuals, and irresistible calls-to-action to captivate your audience and drive unparalleled interaction.
I still today use, and hear familiar millennial use, "lmao"
Usually ironically with a twinge of negativity. Pronounced "luh-mow"
IE "Did you here the US elected Trump again?" "lmao"
Usually only used on its own, it suddenly sounds weird if you put it in a sentence but purely just used as a response to show ironic dissatisfaction quickly.
Die Aussage, dass Filme nur mit weiblichen Pferden gedreht werden, ist ein Mythos bzw. eine vereinfachte Darstellung. Es gibt jedoch einige praktische Gründe, warum in vielen Filmproduktionen oft Stuten (weibliche Pferde) oder Wallache (kastrierte männliche Pferde) bevorzugt werden:
Wallache und Stuten sind ruhiger und besser kontrollierbar
Hengste (unkastrierte männliche Pferde) haben oft ein temperamentvolleres und dominanteres Verhalten, besonders in Gegenwart von Stuten. Das macht sie schwerer zu kontrollieren, was bei Filmaufnahmen ein Problem sein kann.
Wallache sind durch die Kastration in der Regel ruhiger und einfacher zu handhaben.
Stuten sind zwar zyklusabhängig manchmal launisch, aber meist berechenbarer als Hengste.
Sicherheit am Set
Ein Filmset ist voll mit Menschen, Technik, Lichtern und oft lauter Geräuschkulisse. Pferde müssen in dieser Umgebung ruhig bleiben und präzise Anweisungen befolgen. Stuten und Wallache sind in der Regel zuverlässiger in solchen Situationen.
Optik ist wichtiger als Geschlecht
In vielen Fällen ist es egal, ob das Pferd männlich oder weiblich ist – Hauptsache, es sieht so aus, wie es die Rolle erfordert. Die Zuschauer erkennen ohnehin selten das Geschlecht des Pferdes auf der Leinwand.
Mehrfachverwendung eines Pferdes
Oft wird ein einzelnes Pferd durch mehrere Pferde "gedoubelt" (z. B. für Nahaufnahmen, Stunts etc.). Dabei müssen alle Pferde möglichst gleich aussehen. Da Hengste schwieriger mit anderen Pferden zusammenarbeiten, werden lieber Stuten oder Wallache für solche Gruppenarbeiten eingesetzt.
Fazit:
Es werden nicht ausschließlich weibliche Pferde in Filmen eingesetzt – aber Stuten und Wallache sind aufgrund ihres Verhaltens, ihrer Trainierbarkeit und der Sicherheit am Set meist die bessere Wahl. Hengste sind eher die Ausnahme, außer es ist für die Handlung oder eine besondere Szene notwendig.
Das mir den Wallachen und Stuten gilt aber generell für alle Situationen in denen Pferde genutzt werden. Hengste sind generell schwierig und werden selten geritten.
Ist ja bei vielen anderen Nutztieren auch so, z.B. wurden Felder in Europa mit Ochsen (männliche, kastrierte Rinder) gepflügt und nicht mit Stieren (praktischerweise sind Ochsen auch größer als Stiere).
Jetzt wäre es interessant zu wissen, ob Gico auch ein Hengst ist, also männlich und zeugungsfähig. Wobei ein kastriertes männliches Pferd ja OP auch schon falsch beweisen würde.
Given that the average healthy body temperature is ~98.6⁰ F, and humidity on the Gulf Coast tends to be so high you gotta drink the air, I prefer temperatures 85⁰ or lower.
With high temperatures and high humidity, sweat can't even evaporate, forcing your internal body temperature into unhealthy feverish levels. I'm not a fan of heat exhaustion or heat stroke.
I'm also not a fan of freezing temperatures either, but at least people can dress in layers to keep warm when it's cold.
2022 Zero SR/S 0-124mph (top speed)Custom Ride Mode with all 100%Traction Control OffABS on69% starting and 67% after on battery.Road is a slight uphill with...
Loud engine noise is like listening to music on speaker on public transport - kind of good for the device's owner, extremely annoying for everyone else.
I never really see hardware lacking Linux support mentioned, which got me caught by surprise when a computer with a Broadcom network card couldn't use the card. What other hardware don't work with Linux?
Many cheap chinese web cameras from non know brands,really problematic to make work printers which older from 2015 for example canon ,Lexmark cause they use proprietary communication protocols and thus drivers for inux or exist in shitty state which would not work on modern system but worked on Ubuntu from 2012 or not driver not exist at all and so on other very specific type of devices
I remember the old ADSL modems where effectively winmodems. I had to keep a Windows ME machine as my household router until the point the community had reversed engineered them enough to get them working on Linux.
At least they where usb based rather than some random card. I think the whole driver could work in user space.
I started thinking "Oh I wish I could transition to Linux, away from Windows, but what about the latest hardware or random gadget?"
The trick is to flip the question around, namely not "Does my current hardware work with Linux?" but rather "Am I sure my next hardware work well with Linux BEFORE I buy it?" then this remove 99% of headaches. It's typically 1 Web search away from either a lot of complaints or positive feedback... or not much, and then it's up to you to see if you are ready for an adventure. If there is not much but there is some standard interface, e.g. Bluetooth, and no need for a proprietary application, it's nearly sure the main features will work. If a proprietary application is needed, then safer to avoid.
So.... yes maybe surprisingly a LOT of hardware does work well with Linux!
What does not work for me, to give a random example, is the LED controller of my desktop case, which I bought several years ago while Windows was still my main OS. I didn't put a lot of effort into it, cf gitlab.com/CalcProgrammer1/Ope… but the recent article posted on this instance, namely lemmy.ml/post/32389687 makes me want to give it another go at some point!
Broadcom, as you've discovered. That's the one brand that I've always had trouble with; they go out of their way to be closed source: never publishing specs, never responding to developers. They're horrible to the point where I will not buy any product that uses Broadcom chips. Which used to be a PITA because they were also common.
Fingerprint readers, in general, also widely seem to be poorly supported.
One of my computers has a MediaTek wireless chip where WiFi isn't supported but Bluetooth does.
A lot of people have problems with NVidia cards; I've not had trouble with either AMD or Intel GPUs (although, I think all Intel GPUs are CPU integrated?).
Multifunction printers are still iffy, and even just plain printers can give grief; I've come to believe that this is simply because CUPS is ancient and due for a completely new, modern printing service. It's an awful piece of software to have to work with.
My experience with Brother was also good, until it got tipped during a move and came out simply covered in toner. We don't really need a new printer, but I'd buy another Brother LaserJet in a heartbeat.
I bought a new one recently. Apparently they're doing a subscription thing now, so look closely at which model you're buying. But other than that, it works just the same as my old one.
We have a wireless Brother laser MFP from 2-3 years ago that just works. I needed to scan something for the first time a few weeks ago and started to go down to rabbit hole of the official driver package but then I decided to give "scanimage" a try and it just found the scanner.
Hmm, I run an Arc GPU at work without any issues. Just using plain mesa on NixOS. The Intel devs were quite responsive when we ran into issues as well.
I've run AMD, Intel, and Nvidia on linux and I would say my intel experience was by far the best. I use an a380 in my server for transcoding, and I had an a750 in my desktop but switched to a b580. AMD gets the graphics stuff right, but intel does the graphics and compute right on linux where AMD ROCM is a major pain in the ass. It may not be great if you do tons of gaming, but it works quite well for me.
I have spent literal hours of my life trying to get the fingerprint reader on a latitude 7400 to work and i just gave up lol. Passwords are underrated anyway.
Cups is so much better then everything printer related that is available for Windows and it works so good that even Apple was not able or willing to create something on their own and are using it their OS on all devices. Yes, the web interface is dated but nearly every Desktop comes with a modern integrated interface for printer setup and configuration. It is ages that I had to use the web interface. Cups comes with a boatload of printer drivers out of the box. And if not then there are often PPD files on the homepage of the printer manufacturer.
Multifunction printers are a special case and if they are supported or not depends either on how the device is build (are the parts addressable Independently as printer, scanner, modem/Fax) or is it all a integrated mashup that needs special software or drivers from the manufacturer. In the first case can the printer part often be used with cups and the scanner with sane. Well in the second case there is not much that Linux developers can do without support and goodwill from the manufacturer.
I think that's because Yubikey handles the fingerprint reader part, not Linux, right? As far as Linux goes, it's a black box security fob - but I might be wrong about that.
Indeed hence my warning. I'm only sharing this alternative because in practice it works and it's secure (AFAIK).
Edit :
black box security fob
IMHO that's a feature, namely I do not want to OS to mess with this specific part of my setup. I do also have NitroKeys and FPGAs to tinker with but that's different. FWIW if there is an OSHW&FLOSS alternative to the YubiKey Bio please do share.
Yeah, I wasn't saying it was bad; I meant only that Linux didn't have to worry about device drivers for it, because the fob handles reading the fingerprint chip.
I have been fine with both Canon and Lexmark and also a Brother unit that someone in my family owns that their new Win11 machine refused to talk to; I opened up my ASUS t-pad with Ubuntu and printed in five seconds.
But yeah CUPS has actually caused many a headache to the point that I’ve disabled it on some units.
CUPs is simply ancient. It's due for an overhaul; I keep expecting someone to come along and Poettering it, only I'd hope without also making it take over cron jobs and logging.
I’m not Linux-savvy enough to understand everything you said lol. But I’m glad at least that I don’t have to rely on CUPS I just have two printers with static IPs so it’s easy-breezy George and 'Weezy.
On the peripheral end, ElGato. You can usually get their stuff to work but they provide little to no support, usually have issues to work out, and you'll always be relying on third party replacements for their software.
I got a stream deck plus with the xlr dock, since even though I quit content creation I like what it provides and have no reason to downgrade my mic, but the thing has been a headache and a half ever since I switched to cachyOS.
If you mean interoperability there is libimobiledevice.org/ but honestly compared to what KDE Connect can offer with Android phones it's just ... lame.
libimobiledevice is a software library that talks the protocols to support iPhone, iPod Touch, iPad and Apple TV devices running iOS on Linux without the need for jailbreaking.
If you have a GTX 10xx card or later, their are virtually no issue with Wayland anymore. I have two PC with nvidia cards and had almost 0 issue with gnome plasma and hyprland in the last two years.
I've had mixed experiences myself. Sometimes it works, sometimes it randomly breaks. I just wouldn't recommend it to someone who wants it to "just work" and be stable and not do maintenance. For me, I'm someone who's happy to do maintenance, but I don't want that to extend to my graphics card, which in this day and age ought to just work.
The touchpad in the Lenovo 300e is not supported; although the touchscreen does work. I use mouse which is fine most of the time, but it would be nice if the touchpad would be supported one day.
I had an issue with an old Lenovo X260 laptop. The onboard bluetooth device was showing as not being present if the wireless device was loaded. I could have one or the other, but not both. BT/Wifi was being supplied by the same M.2 card, so as soon as a module loaded (the wireless loaded first I guess) it prevented it from being used by another module. I'm not sure if there was an actual fix to that, though. I had a spare USB bluetooth dongle so I just ran that instead.
There's this printer that I wanna use for my job but when I went through the process of connecting it the driver wasn't listed among the massive amount of options. So I gotta print using a work computer instead of my laptop 😪
Probably not the kind of hardware you're thinking of but I have an old Roland synthesizer, an Edirol SD-90, that did not work on Linux. Now, I didn't expect it to given the hoops I had to jump through just to get it to work on modern windows. So Linux seemed out of the question already. But can be a big deal depending on what you use your computer for.
Ah I see, haven't been on "stable" distros for a long time so I wasn't affected. I've enjoyed the good support and the video stuff is definitely nice. On the AMD side, still no idea how to encode or decode anything on my Framework 16, meanwhile Intel is acing it.
So far I've been playing with Linux on my old work laptop and they've been playing together nicely. Almost everything else about the laptop? No. But hey at least graphics works.
A common issue with those hybrid graphics is that it simply doesn't switch and only uses one. Are you sure you're not just using either integrated graphics or your dedicated GPU all the time?
That was a nightmare I'll never recover from. That laptop is now running windows 11. It's what made me promise myself to never ever touch Nvidia ever again. I'm now all Red on my desktop and life is so much better.
Similar story here. I had a laptop running nVidia/Intel dual graphics for a few years and it was so fucking finicky. Primusrun this, optirun that. Ugh. Once upon a time, whenever I heard the word Optimus, I thought of transforming trucks with laser guns. Hearing that same word now puts me in a fetal position.
To any GeForce owners that are considering going Linux full time: do a test run first and see how it works out, because nVidia support on Linux is spotty at best.
Internal HDMI capture cards are barely supported, there are some professional brands like blackmagic that have support but nearly all consumer grade capture cards are not supported at all, because the companies who make them don't care about Linux.
USB based capture cards often work because they use the same standard protocols as USB cameras.
Yeah I got a USB wifi dongle that's a bit tricky. It doesn't work out of the box in most distros but there is drivers for it that do work, fairly well.
I replaced a Realtek one because it constantly dropped connections. Luckily, this was one of the type of fixes that actually turned out to be easier than it looked.
Anybody ever get Winmodems to work or did they all give up on it?
Back in the day, it was hard enough getting dialup internet working on Linux (especially before you had internet in your pocket, so you had to print out HowTos or write down a bunch of notes before you tried to do it).
But it was downright impossible with a class of modems that was designed essentially as a softmodem, heavily reliant on closed-source firmware and drivers, making them practically impossible to work on Linux.
voice actor, artist, and musician. My main concern is recording software and to a lesser extent, art software
Even if you are not based in Brussels where we have resonance-mao.be/ you might have a local equivalent, namely open source and open hardware music enthusiast and profesisonals who meet monthly at least to learn and jam. They know this domain a lot more than I do. There are a LOT of software for all that but I wouldn't go as far as advising you. That said yes it mostly likely will require a bit of re-training. Still IMHO you have done the hardest, namely you understand the concepts behind what the tools do. The interface will be different but how it is actually done should be the same. My advice is to find "your people" and discover together.
Regarding hardware Mint is based on Ubuntu which is based on Debian. I have an NVIDIA GPU and I play (and work) with it daily. Sometimes sleep/resume is buggy but pretty much never ever while actually working or playing. Regarding the Webcam, it's not super convenient but until it gets supported (hopefully) you might have to rely on an external camera.
Page du site Résonance de Bruxelles, atelier mensuel de m.a.o. (musique assistée par ordinateur) pour les utilisateurs de logiciels libres et open source
external cam haha. I use the laptop cam daily to video call family
I actually did that on desktop recently and I enjoy being able to unplug and physically remove it as I don't use it daily. Same for the large external microphone, it's only on my desk when I'll have meetings planed. Maybe you could also use a mobile phone as camera.
Anyway kudos on leaving Google! It's a great step.
My two biggest issues have been HDR and simulation hardware.
It's been a good few years since I've tried it but every time I've tried HDR my saturation just gets cranked to 11 and it looks like those nature photos that are edited to hell and back. Not sure why, and I've heard other people got it working so idk. I think it's just the Nvidia drivers doing their thing and not working.
But controllers for flight and racing Sims are the biggest headache to get working. And then when you do get them working you'll have issues with games running well and detecting them (I think this is actually due to proton/lutris), issues with force feedback, issues with the various buttons and sliders that aren't the primary axis. And then, after you spend hours getting them to work, it'll just break again the next time you want to play. My sims and FPS games are the only reasons I still have a windows install.
About 10% of the hardware in my 2016 MacBook Pro. Twice I've tried to install Debian on that Satan spawn using various gists online, and each time I ended up deciding it wasn't worth the time
Every other piece of hardware I've tried in the past works without fail, that MacBook irks me.
Depends. If you have a 32bit CPU, app support is surprisingly much worse on Linux than on Windows. While the kernel and core systems still support 32bit, there are a ton of apps that are only offered for 64bit Linux while 32bit Windows support is still available. One example: Anything running on Electron.
Racing wheels lacks Linux support. It's the biggest, actually only, reason why I'm dualbooting with Windows.
I've been trying to get my Thrustmaster TX to work on Linux Mint but no success so far. I'm still a little bit newbie with Linux so that might be the reason why my wheel doesn't work (yet).
Hardware # NVIDIA WIRED VR ISSUES: Nvidia proprietary drivers currently have a critical issue with DRM lease causing substantial presentation latency for wired VR headsets, resulting in a delayed viewport effect that makes VR uncomfortable.
FWIW because you do so professionally I'd factor in the time you spend too versus buying hardware (e.g. USB dongles) or even laptop, ideally reselling the old one. I don't know your rate or how much you can buy VAT free or your income at the moment, only that in your context this is also a business decision so you have to consider the ROI of "just" moving on with another hardware, selling the old one and with the time earned (if work is available) get another paid task instead of tinkering.
Often the hotkeys on laptops for screen brightness, mute, etc will either not work or be wonky, on my HP Elitebook on Debian distros the brightness keys both mute the speakers instead, they work fine on Fedora though.
My question is basically the title, but here are some more details.
My computer is used about 75% for work, 20% for personal use (almost entirely web), and 5% for gaming. ~2 y.o. midrange rig w/ Intel CPU, AMD graphics, 32GB DDR4 RAM.
For work, I need lots of straightforward things: video conferencing on Teams (web is fine), Zoom, Word document editing (web is fine), a bunch of other web apps, some light database stuff, etc.
Plus two things that are a bit trickier: OneDrive professional/SharePoint (so I'll need abraunegg's onedrive) and Excel 2024 desktop (web isn't good enough) for which I'll need to run Windows (10? Ameliorated, maybe?) in a VM.
But I also want to do gaming. I wouldn't install a kernel-level rootkit anyway (and I boycott Denuvo), so SteamOS-level compatibility should work great for my needs. I also have a Quest 3, so I'll want to do PCVR, which apparently works great (with Bazzite).
But I don't really grok what Bazzite being immutable means for using it as a daily driver for work/productivity. Under the hood, it's just Fedora 42, right? For immutable distros, you use flatpaks instead of apt install, and they're basically just "apps" that should "just work", right? Do I care about kernel modification?
Or, more to the point, I don't know what I don't know. After preliminary research on this all, I think my plan of going for Bazzite then adding abraunegg's onedrive and a Windows VM with Office 2024 will hit all my needs, but can anyone "sanity check" that plan, or compare the pros/cons with a non-Ubuntu-based alternative?
I'm good enough with computers that I should be able to tinker through the inevitable small challenges that will come up, but I don't really have enough time to do it twice if my initial plan is terrible. (I connect to a Debian server remotely using the terminal, so I have some background—but I needed to install a bunch of packages to get web app software running, and idk if I'll need that as a desktop user.)
Any advice much appreciated! And thanks for reading this far, even if you don't comment. 😀
Edit: thanks for the input so far! I'm turning in, but I'll read everything and reply to stuff tomorrow.
Pro of running an immutable distro is that it is much harder to break during daily use. The con is that you're pretty much setup to only use flatpaks and some things like abraunegg's onedrive aren't available as a flatpak.
Have you considered making the ~~Win10~~ Win11 VM a complete work jail? If you do all things work in there then you get a nice separation of private and work and won't have to worry about work apps linux compatibility. edit: Windows 10 support ends on October 14, 2025
Windows 10 support ends on October 14, 2025. Upgrade to Windows 11 now to ensure continued security and feature updates. Learn more about the transition.
I was thinking Win 10 EOL won't matter if the VM has no Internet access. Linux would sync the files for me, so the Windows VM can just run Excel (and maybe Word, since I'm setting up Office 2024 anyway) using the files synced by abraunegg's onedrive, so it doesn't need internet access. (Assuming there's a partition format that works well for both Windows and Linux that I can use for onedrive, which I assume is a "solved" problem by now—i remember this being hard 20 years ago.)
And his package apparently works in Fedora 42 with docker, which I assume should work fine.
But yeah; maybe what you're suggesting makes more sense. And that VM definitely would need web access, then, so Win 10 is a non-starter. The database work I do is likely easier in Linux, but that's likely easy enough to get data files out of the VM for just that work, I would expect.
Another question now comes to mind; I'm going to look this up now; how hard is it to copy/paste between Linux and a VM? Edit: As I'd hoped, this is also apparently a solved problem and sounds easy to configure.
Just something to consider as you're thinking about using a virtual machine for windows; you have enough RAM to comfortably run a linux host with Windows 11 + Debian Stable VMs for work + work db server. I'm allergic to mixing private stuff with work stuff and there's a great thing to be able to shut work down at the end of the day. (Freeing up all your hardware for your private fun at the same time)
I’m by no means an expert on this, but I have used both Bazzite and Fedora workstation as my exclusive operating systems.
What I would say is that they’re both perfectly adequate for the tasks you described.
Personally, I’d say unless you prefer things handed to you, choose Fedora. I don’t have a problem with flatpacks, but I missed being able to easily use dnf. At the end of the day, though, there are ways around everything; you can still get what you need done on Bazzite.
In terms of kernel tweaks, etc. I barely noticed any difference in performance between the 2. Keep in mind that this was a relatively modern pc so performance wasn’t really an issue that I was looking out for.
Overall though, you’ll be fine whatever you choose. I also had to use MS office for work and it’s pretty much the one thing you can’t get working on Linux. You’ll have to explore your options for that, I ended moving back to a Mac because of Ableton live 🙁
The main issue you'll run into is nicher proprietary software being hard to install, but that's what containers are for. The main one I see is if you need to install some proprietary VPN client it gets annoying, but since you'll be running a VM anyway you can do some network trickery. My work's antivirus only works on Ubuntu and RHEL, proprietary kernel modules so it's got to be at least one of those kernels.
Linux is Linux, nothing's impossible to solve even with Bazzite's immutability. Worst comes to worst you make your own images and it's not that hard, you basically just fork it on GitHub and let the CI do its thing.
But do you have time to fiddle to make it work and take the risk, or do you want to play it safe? How confident are you with Bazzite's more advanced topics?
The main one I see is if you need to install some proprietary VPN client it gets annoyingf
You're right. I have a crappy work-supplied Windows laptop that has exactly that installed. It would be nice not to need to boot into that when I need to work on the server from home, but it's not a deal breaker.
No other specific non-web-based software is needed for work, aside from the aforementioned OneDrive and Excel 2024.
Edit: Your last paragraph is exactly what I'm asking about; I'm capable of doing slightly involved tinkering, but it would need to be something that I can Google Fu through each step of someone walking through most of the steps. I don't know it at all well enough to go completely "off script" and just tinker with confidence.
It sounds like you're suggesting that going for something mainstream and getting it to work for games is likely a better option, particularly for someone with limited Limits experience?
Debian is far from being a mainstream workstation distro.
Debian is/was a very good server distro but there are lots of good alternatives to debian nowadays which may be much better for someones usecase. Debian is not the ultima ratio.
Good to know! I use it at work for a server; ngl, my non-Bazzite distro search hasn't been extensive, except getting to the point that I think I don't want anything Ubuntu-based.
For me, I personally just run my workplace stuff in a VM (Debian 12) using KVM.
For excel desktop, OnlyOffice has a Desktop application that you can use to edit local files, which has pretty good compatibility with Microsoft products.
ONLYOFFICE offers a secure online office suite highly compatible with MS Office formats. Connect it to your web platform for document editing and collaboration or use as a part of ONLYOFFICE Workspace.
Just something to bear in mind regarding OneDrive; the unofficial clients don’t have access to certain APIs that the official clients use meaning that it only syncs every 5 minutes at best. As far as I know there’s nothing you can do about it.
Would it be possible to use a "thin" Windows VM as "client" for One Drive? Meaning that the client would be responsible for synchronization of mounted directories which are actually used on the host machine.
Mir sind an meinen Telefonen immer die Klinkenbuchsen kaputtgegangen, das Problem habe ich mit Blauzahn nicht. Und Blauzahn-Kopfhörer halten bei mir bisher auch länger, die bekommen nämlich keinen Kabelbruch.
Ich finde das Konzept "kabelloser Kopfhörer" eigentlich auch kacke, aber es funktioniert bei mir extrem viel besser.
Möglicherweise bei einigen Zuhausis unbeliebte Meinung: Blauzahn ist allein deswegen um Längen besser, weil ich mich nicht ständig mir irgendwelchen blöden Kabeln rumärgern muss.
Kabel gehen vor allem auch gerne mal kaputt, zumindest bei der Sorte Kopfhörer die man im allgemeinen unterwegs benutzt (solange man nicht auch unterwegs zu den dicken Mickymäusen greift, die haben ja viel dickere Kabel).
Die britischen Übersee-Kolonien mit mehrheitlich europäisch-stämmiger Bevölkerung (USA, Kanada, Australien usw.) sind nur deswegen keine Kolonien mehr, weil sie irgendwann unabhängig geworden sind. Der kolonisierten Bevölkerung hat das nicht wirklich geholfen.
Wer sind eigentlich diese "Linksliberalen" in der heutigen Parteienlandschaft? Bei Grünen-Wählern rennt man damit ja eher offene Türen ein (und den Parteiführungen ist das Thema in der Regel zumindest bekannt), und rechts davon sehe ich nur autoritäre Parteien die bestenfalls wirtschaftsliberal sind.
Die ganze Israel Palästina Situation ist so fickend kompliziert, dass sie sich nicht in einem Mem abbilden lässt. Und Israel als monoethnischen jüdischen Staat darzustellen ist Quatsch.
Ändere meinen Verstand
(Womit ich die scheiße die die israelische Regierung baut auf keinen Fall entschuldigen will)
Israel ist ein Ethnostaat und zudem auch als jüdischer Staat (nicht säkularer Staat) definiert.
Es ist ähnlich wie in Apartheid Südafrika, wo die Macht einzig von einer eingewanderten Ethnie gehalten wird und die native Bevölkerung als Menschen zweiter Klasse mit weniger Rechten existieren.
Judentum ist halt eine Ethnoreligion und soweit ich weiß sehen die meisten Juden das auch so - Konvertiten gibt es extrem selten und Missionierung in irgendeiner Form ist auch nicht wirklich vorgesehen. Ich kann mir auch schlecht vorstellen, dass Palästinenser mit Kusshand aufgenommen würden, wenn sie massenhaft zum Judentum übertreten würden.
“Weird Al” Yankovic breaks down his most iconic tracks including ‘My Bologna,’ ‘White And Nerdy,’ ‘Another One Rides The Bus,’ ‘Eat It,’ ‘Amish Paraside,’ ‘I...
It never made sense to me to put password managers in the cloud. Regards to what you intend it to do, you’re making it accessible to a wider audience than necessary. And yet, I’m using iCloud. It’s time for a change.
I’m thinking of just running a locally hosted password manager on my home server and letting my devices sync with it somehow when I’m at home. I have a VPN into my home network when I’m away that automatically triggers when I leave the house, so even that’s not that big an issue, but I’m really not familiar with what’s gonna cleanly integrate with all my stuff and be easy to use. All I know is I wanna kill the cloud functionality of my setup.
I already have a jellyfish server so I figured I would just throw this onto that. Any suggestions?
If you’re happy with how Apple Password works for you, I can recommend StrongBox. It keeps all data in a KeePass2 database and integrates into Apple’s AutoFill API. That means it feels almost native when using it. No browser plugin needed. (At least not for Safari.) And you can decide how you sync the database file.
I'm not sure what I think about the white on white background though, I might one day open it up and use a black marker to color in the Roman Numerals for better contrast.
Sorry for potato quality, Lemmy kept timing out so I had to reduce photo quality to knock the image size down.
also for example i want to argue with maiq here lemmy.world/post/32190755/1794… about their ban but i got banned from blahaj for my free speech so i cant comment there and even though im being silenced by the deepstate gays and that makes my blood boil i have to respect adas right to ban me so im not a hypocrite for banning maiq
Im trying to figure out how online search funkcion works.. Didnt have much luck for now. And also general discusion about the app would be wery helpfull for eweryone.
This will probably help anyone unfamiliar with it, since the first search result for Alpaca AI is another online paid AI service which does something entirely different than this. It's used for AI image generation.
The main question I have is since Ollama is optional... If you optionally use it, is it still sharing data with ~~Facebook~~ Meta?
Didnt know that ollama is sharing data with facebook.. Why would it do something like that? Wouldnt that be oposite of what it was created for and that is privacy.. Where did you get that info?
It looked like from comments that's why he made the Ollama integration optional, because some people were concerned since Ollama was built by Meta. It can run without Ollama, it seems.
EDIT: Doing more research on Ollama itself, I'm unconvinced that it's sharing any data, despite being built by Meta.
Yeah in that case you probably want something else. So far i've only ever used it for text based questions. I think i remember seeing that there is also a webui out there but i don't remember the name.
AnythingLLM is the AI application you've been seeking. Use any LLM to chat with your documents, enhance your productivity, and run the latest state-of-the-art LLMs completely privately with no technical setup.
This is offtopic, but I switched from Alpaca to duck.ai. I try not to use AI too often and even though I like the idea to run it locally, duck.ai is way easier to use.
I use it also some times but that is online ai and everything you use it for goes to someones servers so its not private. Alpaca is using ollama to run ai localy on your machine so everything you use it for is private. So those two are completly diferent and are not for comparing which one is easier to use because ease of use is not the point here. Privacy is.
Every day, without fail, I think of three things for which I am grateful. A reminder fires on all my devices. I don’t dismiss it until I’ve completed the task, whether that’s early in the day or not until the evening. Keeps my outlook healthy cause I’m a pretty cynical person.
Before committing to doing a thing you’re conflicted about, brainstorm about it twice. Once when sober. And once when not. If it seems like a good idea in both states, it will typically lead to having no regrets on the matter even if it doesn’t work out like you hoped.
We planted both raspberries and strawberries over the last few years and are getting so many we can't eat them all. We give them away, but is there something better we can do with them?
Edit: thanks for all the great responses. I think we're going to freeze them.
You can just freeze them for smoothies. Everyone is saying jam and that’s a good idea but it’s a whole process and has to be sanitary. It’s not super hard, obviously, and it’s worth learning how to do but the first time can be a bit daunting and you really have to follow every step. A smoothie is easy.
Another pretty easy thing is to make ice cream and freeze it. A restaurant I cooked at had fig trees that would go nuts once a year and we’d have buckets of figs. We basically made vanilla ice cream and added figs. That was delicious and ice cream obviously freezes well.
Photopea Online Photo Editor lets you edit photos, apply effects, filters, add text, crop or resize pictures. Do Online Photo Editing in your browser for free!
A new version of fontconfig release recently with the added option to disable bitmap fonts. If you're using a rolling release distro, this might break bitmap fonts for you. It definitely does on Arch (and likely Arch-based distros) because they opted to disable them by default for some reason (AFAICT upstream gives the choice but does not recommend one way or the other).
This'll cause fontconfig to skip bitmap fonts, your apps won't be able to access them.
I'd recommend a user-level fontconfig file. Create $XDG_CONFIG_HOME/fontconfig/fonts.conf with below contents and you get your bitmap fonts back. This negates the file in /etc/fonts/conf.d/70-no-bitmaps-except-emoji.conf. This is the first time I'm configuring fontconfig so there may be a better way ¯_(ツ)_/¯
This should've definitely been news imo especially because this is not the default behavior of upstream. I shouldn't have to read fontconfig PRs to figure out why my fonts broke, even on Arch.
To allow users to choose one of 70-yes-bitmaps.conf, 70-no-bitmaps-and-emoji.conf, or 70-no-bitmaps-except-emoji.conf for default installation. Fixes https://gitlab.freedesktop.org/fontconfig/fontconfig/-/issues/474 Changelog: added
There's a powerful search for filtering by country, language or software (#Mastodon, #Flipboard, #Threads, #Ghost, #Bluesky...) & you can easily export the results for batch-following (in Mastodon at least).
I'm always searching for (verified!) accounts, that I missed. If you know some, please send them to @mho@social.heise.de
I muted the entire Flipboard instance. They were just annoying. If I need any of those, I use RSS.
AP is supposed to be interactive but I'm pretty sure none of them are looking at those. And the ones that are already have accounts so these are just redundant anyway.
We (@heiseonline@social.heise.de) have federated accounts on #Flipboard: The problem is, you still can only see the interactions in the app. But there you can't easily switch between two accounts. So I have my private one activated – and won't see the interactions.
And you're right: For accounts from organizations, that are in the #Fediverse a federated account on Flipboard is not of much use. But there are some, that aren't otherwise reachable from the Fediverse. (RSS is another story, that's true)
Thanks for the answer. This might be a dumb question but what does that mean exactly? Is Flipboard approaching the different media outlets and offering to share their content on Flipboard's instance? If so, what do the media outlets get out of using flipboard versus their own instance or a more generic instance like mastadon.social?
I’ve been using VirtualBox for a year now and I’m getting pretty ticked every time I have to start a new Ubuntu VM. I speed more time going to root shell prompt to add myself to sudoers file, add myself to groups, the addons, shared folder and storage not mounting right away….. etc etc. I’m sure I might be not using VirtualBox to its full potential to avoid long setup times but I feel like I shouldn’t have to deal with this. It should act is it being installed on a bare metal machine. Is there a more modern approach? Something more streamlined? FYI I’m learning containers and miniKube so I’m not jumping in the deep end quite yet.
Fedora Silverblue -- a very good balance of immutable distro and user friendliness. Stability and reliability of being immutable without low-level hacking like in Nix / Guix.
I use immutable distros for the stability, and the nixOS approach isn’t for me.
You can install whatever you like using a tool called distrobox, which allows you to run containers easily.
I have an arch Linux container, and I have access to the entire AUR if I so please. I use that container to run Steam, and performance was the same as on Bazzite using the natively installed Steam.
This is not entirely true. Is there overhead? Sure. But, if the distro used for the container provides (somehow) faster or more performative packages to begin with, then running software within a fast container can be faster that running it natively on the slower host. Link to the comment in which the link to the above benchmark can be found as proof. As can be seen, the Clear Linux container performs better in 90% of the benchmarks. And, the Fedora container is only negligibly (so within margin of error) less performative than the Fedora host.
Hi all,
after I've added support for Clear Linux containers to distrobox (http://github.com/89luca89/distrobox), I thought that it would be a nice experiment to show the performance benefits of Clear Linux even on non-Clear distributions.
Q: Would a normal system (read: I'm not talking about Guix System or NixOS) allow you to install multiple branches/versions of the same software natively without introducing a lot of headaches?
A: No. This is literally unsupported.
Then, if using containers (or any other similar platform) allows one to breach that limitation, would it be fair to call containers (and their like) to be strictly limited/limiting in customization?
Sure fam. This is actually a situation that might come up a lot. Basically any instance of dependency hell caused by conflicting dependencies would be resolved if two different versions of the same software could coexist. - Peeps that are maintaining packages probably have to deal with this every once in a while as well. Especially if the packaged software relies on some very niche (and possibly questionable) dependencies*. To point towards one of the most openly discussed cases of this, consider watching by Brodie in which the takedown of the unofficial packages of Bottles is being discussed. - E.g. whenever one tries to compile software themselves OR install/use them as/from binaries/tarballs. - E.g. installing packages as PPAs or other third party repositories (like e.g. the AUR) can also come with dependency hell and are often the reason why breakage occurs.
Bottles and it's developers are very much in favour of upstream packaging and flatpaks especially after the situation they dealt with because of broken outda...
Excellent choice fam! However, as much as I adore Fedora Kinoite, it might not provide the best onboarding 😅. If you're fine with that, then please feel free to go ahead and embark on your journey. However, I would suggest you to at least look into uBlue's offerings:
All operate within the paradigm of providing a so-called "batteries-included" product. So, going through the whole mumbo jumbo of RPM Fusion's Howtos to see what's relevant for you to apply and painstakingly waiting for them to be applied can be skipped.
Furthermore, based on your precise needs, you can choose to adopt more opinionated variants:
Bazzite, on the other hand, is their game ready variant that defaults to KDE
Or, if you prefer a minimal installation, you can choose to install their base images instead. These basically offer Fedora's images (including Kinoite) with the absolute minimal of hardware enablement and other essential uBlue goodies.
If you are a system crafter at heart, then perhaps you're more attracted towards creating your own bootc image. This can be achieved by uBlue's own image-template OR through the community-effort in BlueBuild.
Regardless, fam, enjoy! And please consider to report back on your findings 😉! I would love to read your adventures of venturing the exotic waters of Fedora Atomic 😊!
Apologies for the 'spam', but I was afraid editing my previous message would be in vain. If you desire/crave for decent documentation, then Bazzite deserves another endorsement. While its documentation isn't as expansive as the excellent ArchWiki, it should be more than able to answer your questions.
Secondly, if you happen to come across an issue that has been painstakingly difficult to resolve, then please consider consulting its many community channels for support. There's a Discourse, a Discord and an AnswerOverflow. So pick your poison 😉. FWIW, I've always had great experiences on their Discord.
İçimden, "Bunca lafın üzerine kankim asaletine yakışanı yapar da bir teşekkürü esirgemez herhalde," diye düşünmüştüm. Ama maalesef, Türkiyeli olması hasebiyle daha level atlayamamış 😂. Olsun, demek ki henüz kalkınma vakti gelmemiş 🤣.
Tekte türkçe konuştuğumu bildin. Aferin. Neyse, dediğim gibi; Immutable dağıtımlardan birini şu an ki Fedora KDE ile dualboot edeceğim. Ona göre Immutable dağıtımlara geçebilirim. (GRUB sayesinde kolay olur.)
::: spoiler alakasız bir rastgele düşünce yoksa beni bir yerden tanıyor musun? :::
Bazzite has been working so well that even the wife has converted over. It cured my distro hopping so I haven't played much attention to how other distros have been doing.
A question - can I use Bazzite for uses other than gaming? I game on my laptop, but most of the time I'm writing code. Could I use it for that or should I go for something like Fedora, Debian or Arch?
I would say that development is the one thing that can get very annoying on immutable distros.
Flatpaks can only get you so far (as seen by the VS Code Flatpak's limitations that have to be worked around). I don't even use VS Code, so I can get around that pretty comfortably, but I have to use Distrobox for a lot of miscellaneous developer tools, and even then, I still run into problems and I can't install container tools inside of the containers that I'm already working in.
Not to discourage you from trying. I can still get by with some dev work on Bazzite, but it's waaay easier to do the same dev work on CachyOS (Arch-derivative) because I can just install shit normally and it will work.
The whole of Fedora atomic distros are interesting in an exercise in getting good with layering and distrobox. Pop_os 24.04 just to see if a third pillar of Linux frontends with GTK and Qt is viable. People are always pissy about Manjaro but they seem to have an interesting present being pre installed on the Orange Pi Neo handheld
The Arch derivatives, CachyOS and EndeavourOS. They’ve really done a good job with Arch and cultivating their own communities. It’s paid off for them and Arch isn’t really seen as just a hobby distro like 15 years ago, or a meme like the last 5 years.
Bazzite, for both general desktop use or dedicated for gaming. Just strength to strength from the project. I hope Fedora’s proposal to remove 32-bit libs doesn’t hurt them. By far the best, just untouchable, atomic distro.
Linux Mint for the first time in about 10 years is being seriously recommended to new users and not laughed off as a Linux Windows clone. That team has never stopped putting in the effort and deserve it. I don’t know how they’re going with/plans for Wayland, but I hope smoothly.
Fedora. I’ve never used it personally. But since starting with Linux in 2006 I’ve only ever seen or heard of it as kind of “being there” but not really talked about much. People are talking about it now as being a reliable and solid choice for new users and intermediate users.
Debian. I do see Debian mentioned now a lot more than it has been in years. I think people generally are becoming more satisfied with the idea of a stable OS, ages not writing it off as being left behind, constantly out of date, can’t run latest AMD graphics, etc. In my mind, flatpak helps that a lot, since you don’t need to wait years to get the latest versions of programs, but I don’t know for sure that is helping this current wave of success.
On the other hand:
Tumbleweed seems to be stagnating. They’ve made some changes and moving away from yast for the first in forever. The switch to selinux has affected proton usage in a way that it’s not super “new user friendly”. Even amongst people wanting to try out Opensuse, you often see “I’ll give Slowroll a try.”
PopOs’ cosmic desktop is still in early stages, and you do hear good things, but popos seems even less talked about now. They might have hit their peak 3-5 years ago, or maybe it will come around again for them like some of the distros above.
Nobara was massively talked up a few years back. But not so much now. And you do see discussions like “Nobara had too many problems on this machine, I just went straight-up Fedora”.
The other main hobby/enthusiast distros that were getting discussed more in the last few years - NixOS, Void Linux, Alpine. Not so much anymore. NixOS definitely did take off a lot more than the others, but it still just doesn’t come up as often as a couple years ago.
Debian. I do see Debian mentioned now a lot more than it has been in years.
I haven't noticed much difference, Debian has always been the go to distro if you wanted reliability and repositories that cover almost everything. Debian has always been an excellent choice for productivity. It's not by accident that Debian for more than 20 years has been the distro with by far the most derivatives.
By that standard Arch is the only distro that has achieved something similar, and it may be somewhat telling that SteamOS switched from Debian based to Arch based. Arch is way smaller in scope, and more nimble and easier to maintain. But AFAIK they do not have the democratic process Debian has, so I'm not sure it can really be called community based distro like Debian. Arch has more of a top leadership. Debian is probably the most true to the Free and Open Source ideals among the big distros.
Oh yeah, there’s a big difference now in distro conversations.
Debian was never talked about as a serious contender in distro hopping, discussions around “best distro for me”, starter for new users, etc. Just an occasional; “of you’re going to choose Ubuntu, just pick Debian and go straight to the source”.
But it was often pointed out that Debians pros is what made it not recommended for general end-user. It’s strong for servers and productivity. But its stability meant kernel and mesa updates were slow, many programs lagged. Gaming performance suffers and new hardware support is weaker. It was recognised that Ubuntu and Mint would add convenience for everyday use cases on top of Debian.
Especially the early to mid 2010s was all about “bleeding edge/rolling release is too likely to break, Debian is too stable to get updates, pick something in between”
Now, this problem is being lessened, at the same time people are liking the stability for general desktop use. Bleeding edge became highly recommended 5 - 8 years ago, and now in 2025 people care less about that and it’s easy to make stable distros work for your needs just as well.
Now people will regularly say “use Debian, it’s solid and reliable” and not follow up with “you’ll have to deal with old packages though”
That's the thing though you really don't have to deal with old packages. The ones that count are in the backports repo and for everything else there's is flatpak. Plus I think the reason steamos switched from Debian to arch was the methodology changed from being mutable to immutable and making it more for a handheld vs installed on many systems. It had nothing to do with the quality of the distro.
I’m not discussing quality of distro here, but people’s changing perception of Debian over the years. The way that people currently use/suggest/recommend distros has put Debian more in favour than say 10 years ago, 15 years ago.
It’s always been good depending on use case, but people currently are recommending it more for general use than has been typical before. And I think it is, as you said, that some of those past limiting factors are not a big problem anymore. I did suggest that in my first post.
Debian was never talked about as a serious contender in distro hopping
Back in 2005 when Ubuntu was all the rage, the first alternative to Ubuntu was almost always Debian. Only later when Mint became a thing, that was also an obvious alternative, because it was similarly focused on being easy to use.
And also PCLinuxOS and Mandriva, those were the big recommendations as well. But we’re pre-dating the common distro hopping discussions I think we had in mind by going back that far too.
But we’re pre-dating the common distro hopping discussions
No we aren't, Linux fora were full of them even before Ubuntu more than 20 years ago. Debian, Suse, Fedora, Mandrake, Mepis, PCLinux. Distro hopping was always a thing people debated.
The rest of that sentence is a bit confusing, who are we? And how am I supposed to read minds? And going back was kind of where we started, because you claimed it was a new thing for Debian. Debian was definitely recommended to general users, for many good reasons. Stability and huge repository among them, but also user friendly install procedure, and good package manager, that handled dependencies way better than Suse and Fedora.
Fedora has gotten much more stable and reliable in the past decade. 15+ years ago it was generally regarded as nice but unstable. I'd say nowadays for a moderately technical user it offers a better experience overall than Ubuntu or Mint. There are still unfortunately some pitfalls for new users (media codecs come to mind). In fact, the only issues i've had in most of those 10 years have been related to GNOME plugins or the Plasma 6 transition, problems that also occured on Ubuntu.
I have 2 computers: one running Ubuntu, one Fedora. This has been my setup for over a decade. I have lately been finding Ubuntu more and more cumbersome to use, with less of the "just works" experience i remember having in the past. Perhaps the focus on cloud computing has caused the desktop to languish a bit.
I would like to try Pop!_OS, but i haven't had a free evening for a while to do a backup and reinstall on one of my computers. It's also been a while since i used Mint, so my impression could be out of date.
The nice thing about Linux overall (compared to macOS and Windows) is that each update generally improves on the experience. On commercial platforms the experience gets worse as often as it gets better, usually both at the same time. GNOME and Plasma are both overall much better than they were a decade ago (despite a few regressions) while macOS and Windows are both worse in general.
I started my Linux journey with Ubuntu, then switched to Linux Mint for a while and dabbled with Manjaro for a hot minute, and ultimately found my home on Fedora Workstation for the past several years. Once set up with rpmfusion and 3rd party codecs it's a very solid and reliable distribution. The new atomic projects (and derivatives) look very interesting too.
While Void isn't exactly under rated ( it is very highly rated on distro watch for one ), for someone looking for a systemd free distro or a light weight one in general, it is a decent choice. The repos aren't as broad based as Arch but they do have newer versions of the software that they host.
I could be wrong, but aren't Linux Mint and Pop OS ultimately based on Debian? (Mint is based on Ubuntu which in return has a Debian base). Debian was my main entry way to the Linux world and there is a reason why so many distros are built on it. Very old as well (not as old as Slack ware but Slack ware isn't exactly noob friendly).
All those packages, but terrible/lacking documentation and LSP support 😭 And, yes, I've tried nixd and nil, and they're not even close.
I've tried to learn Nix multiple times, and even got by okay running NixOS for a year or so, but doing almost anything that isn't just adding a package to a list in a nix file or flake was like pulling teeth because everything is documented so poorly (or not at all). It would take me hours to do what I could have done in seconds with any other package management tool or configuration management because I'd have to scour hundreds of search results to find someone that did the thing I'm trying to do because there was little-to-no documentation for it.
Nix is a tool with amazing promise that could solve so many problems if they could get their documentation and LSP support up to the standard of something like Rust.
I discovered they have a Matrix server where people will literally debug your config for you and help you solve issues. But you are right, if you try doing it yourself without help you'll be pulling your hair out
Love Fedora with KDE, my new daily driver. Tested Endeavour, Manjaro and also Mint and openSuSE but finally went with Fedora. Debian (on the other side) is my preferred base for servers and services.
Ton of comments, and I havent read them all, but I wanted to ask if you really meant popular or if you wanted something for a specific reason. Easy for new ppl to linux, good for desktops, etc etc.
I dont really use GUIs on linux, except for when I want to have a fancy pants riced network monitor type situation. I am a big fan of NixOS except for python Dev stuff. Big fan of being able to clone a machine or recover a machine with a single conf file.
If the only thing holding you back from NixOS is my python comment, my issue was with Numpy, which really really demands that you install it globally. Pretty sure you can make it work by using a dev-shell, installing it globally in that shell, then doing everything else in that dev environment normally. I was newish to nixos at the time.
Otherwise I tend to fall back to ubuntu server, but only because it was something I knew. I prefered Centos7 back in the day before RedHat killed Centos. NixOS was my move from there. Been using Alpine as the os in my docker images, but havent really explored a lot of other recent linux os's at the moment.
We don't know and, let us be frank, due to the nature of the community, it is impossible to know... Distros could report the downloads but if it became a KPI, it will be abused right away.
Fedora is well funded and probably the best overall. Now, its ties to US and IBM/Red Hat will keep it constrain in growth.
OpenSUSE is a second contender in funding and best overall, but German branding has taken a deep these last years... I know the government actions should be separate but, in reality, is that SUSE as a company will be constrained in growth too, therefore OpenSUSE. Its community need to be more global too.
Debian is king still. Much of development depends on the previous 2. However, in spite of huge progress lately, still not the best for new Linux users. That is why Linux Mint, Ubuntus, TuxedoOS still exist, but their growth won't be much as Debian gets better and better, but always a step behind the corporate funded ones. For today
The Chinese Linux offerings are becoming well funded are very interesting... but there is a bridge to cross that most of the world still not ready to cross... partly, because there are reasons to be skeptical since the community developing it is highly regional, partly is just plain racism. It is a pity, because these would have the biggest potential for a mayor breakthrough with all that money and human capital pouring from different companies, but I don't see it capable of breaching that regional aspect.
Finally we have Arch. I see it better positioned for future than Debian TBH, but we are talking 5 years down the line. It won't be Arch though, it will be some new variant like CachyOS is doing today that brings Arch to the public... maybe KDE's new bet?!
I haven't play much with them but this is my take:
Deepin. (Just released v25) Based on Debian. Community distro. Very well done and very modern look. It is heavy though and the beta I tried had glitches. Being primarily developed in Chinese though one can tell English was added later. If they only dedicated a bit more effort on languages it would be amazing. It is as much different from Linux Mint as it gets... for better or for worse, but I like their take.
Ubuntu Kylin. Institutional cooperation with Canonical. Haven't tried it. It is just Ubuntu catering their offer to the Chinese market. If you like Ubuntu's or Mint and you language is Chinese, this is for you.
OpenKylin. Fully Independent (No Debian, Arch...). Community distro. Its usage for now seems to be more for institutions though.
There are others but for niches.
China, of course, it want to get independent from MS and Apple so in the next years is going to push heavily for alternative OS so it will be interesting to see what, and for sure, our FOSS community will benefit from that as DeepSeek benefited the AI.
Garuda absolutely nails it with their helper app that sets you up with a choice of popular software, handles updates, and gives you easy access to common settings.
It makes it very approachable for people new to Linux.
Whats the purpose of gentoo over arch and when do you draw the line of diminishing returns? It sounds like gentoo is a lot harder for not much more reward.
Tried Manjaro and Opensuse for a presentation machine lately: issues over issues, that just shouldn't exist on new installation (problems with USB disks, input). Came back to Debian asap because Debian, weirdly, "just works (tm) now.
I daily drive Fedora and I think it has the best Gnome desktop.
But in terms of "best at what they do" I'm blown away by Mint as an apporoachable easy to use "just works" OS. It instantly became my recommendation to new linux converts. Everything is easy to set up. It's remarkably user friendlly. Good software store, flatpack support out of the box. Brilliant hardware support. I like the aesthetics as well.
I have an old Core 2 machine and I tried to get every potato grade distro running on it. I tried Puppy, and Linux Lite, and AntiX and all the "this will run on your toaster" type distros and had problems with every one of them. Mint XFCE installed no problem. It ran beautifully. I pressed my luck and installed a Quadro K620 and an old firewire card (trying to back up old Mini-DV videos). It handled ancient hardware perfectly. Butter smooth 1440p desktop computing and light video editing on an 18 year old machine.
I've started using Nobara recently, and I like it a LOT. Makes it really easy for a noob like me to both play games and edit videos. I actually made a Monster Hunter video entirely in Linux with Davinci Resolve, and it worked really well. I've been an adobe tool my entire editing life, but I really like the switch I recently made 😀
NixOS is amazing, but it's also got a crazy learning curve. Once you grok it though, it really changes the way you configure your computer.
Fedora is always my favorite big name distro, they're constantly pushing the envelope and adopting new features that need some stability and exposure to mature.
I'm currently using Pop!_OS, which is a great desktop distro.
I was using MX Linux a lot which is amazing for both times when you need a portable distro with lots of features and when you need something that will still run well on older machines.
4 likes, 0 comments - livetimefe on June 28, 2025: "When you accidentally discovere your favourite band has a song that is hella relevant. @tvg_turisas
I do not own any of the videos used in this reel
Clip Credits: @eye.on.
I think it's excellent that we have a new bogeyman to take over from Lennart Poettering, Hans Reiser (before the murder) and everyone that came before them. To be honest, the Pottering thing was getting old.
Plus ça change.
Is there an audition process or do people just make themselves available via secret Santa or that game when your role is given to you (and everyone else) in an envelope at a party?
The world sadly needs some of the stuff only antisocial nutters can provide. If the said nutter's gift to the world is good enough, the drama and discord that the nutter bequeaths will be forgotten and they will be given a free pass.
I highly disagree with the attitude of this comment (after all Linus allowed BCacheFS in and now complains about it) but necessary evil in itself is a valid thing for most people unfortunately.
I haven't had a proper game console since the PS3.
I would like to get one, mostly to play with my family (wife, 7yo kid). I had been waiting for the Switch 2 for a while now (I really resisted the urge to get a Switch OLED back when it was released...).
On the plus side:
it's really geared towards family/party gaming
it's Nintendo, so you get the whole usual games (Mario Kart, Zelda, etc.)
like most consoles, it's plug and play and can be enjoyed in the living room (I kind of gave up trying to set up a proper gaming experience with my Linux PCs, given that I don't have the hardware for it)
On the minus side:
the battery life is not great to say the least (2.5 hours takes me back of the Game Gear in early 90s!)
the screen seems to be pretty bad too (at least it's a step back from the OLED one of the Switch)
the joycons are still not using a Hall effect sensor, meaning they might still be prone to drifting
most of the games will not be sold as proper cartridges but as download codes
the whole thing (console, additional gamepads, games) is quite pricey
it's Nintendo, famous for their anti-everything (anti-homebrew, anti-emulation, anti-piracy)
Should I still go with it, or is there a better option? (I hope the better option is not to wait 4 more years for Nintendo to release a newer Switch 2 that would fix the shitty hardware).
I personally don't recommend anyone get the Switch 2. The new price points are frankly ridiculous, and I'd hate to see that shit get justified by sales.
Personally, I'd recommend looking into handheld PCs. I haven't looked into them much myself due to lack of money, but they're generally much more worth the cost from what I've heard.
All that said, I missed that you were looking for something to play with your 7 year old child. Switch might be better, but any handheld would be... notably destructible, so that's a factor to keep in mind.
We are constantly fed a version of AI that looks, sounds and acts suspiciously like us. It speaks in polished sentences, mimics emotions, expresses curiosity, claims to feel compassion, even dabbles in what it calls creativity.
But what we call AI today is nothing more than a statistical machine: a digital parrot regurgitating patterns mined from oceans of human data (the situation hasn’t changed much since it was discussed here five years ago). When it writes an answer to a question, it literally just guesses which letter and word will come next in a sequence – based on the data it’s been trained on.
This means AI has no understanding. No consciousness. No knowledge in any real, human sense. Just pure probability-driven, engineered brilliance — nothing more, and nothing less.
So why is a real “thinking” AI likely impossible? Because it’s bodiless. It has no senses, no flesh, no nerves, no pain, no pleasure. It doesn’t hunger, desire or fear. And because there is no cognition — not a shred — there’s a fundamental gap between the data it consumes (data born out of human feelings and experience) and what it can do with them.
Philosopher David Chalmers calls the mysterious mechanism underlying the relationship between our physical body and consciousness the “hard problem of consciousness”. Eminent scientists have recently hypothesised that consciousness actually emerges from the integration of internal, mental states with sensory representations (such as changes in heart rate, sweating and much more).
Given the paramount importance of the human senses and emotion for consciousness to “happen”, there is a profound and probably irreconcilable disconnect between general AI, the machine, and consciousness, a human phenomenon.
We are constantly fed a version of AI that looks, sounds and acts suspiciously like us. It speaks in polished sentences, mimics emotions, expresses curiosity, claims to feel compassion, even dabbles in what it calls creativity.
But what we call AI today is nothing more than a statistical machine: a digital parrot regurgitating patterns mined from oceans of human data (the situation hasn’t changed much since it was discussed here five years ago). When it writes an answer to a question, it literally just guesses which letter and word will come next in a sequence – based on the data it’s been trained on.
This means AI has no understanding. No consciousness. No knowledge in any real, human sense. Just pure probability-driven, engineered brilliance — nothing more, and nothing less.
So why is a real “thinking” AI likely impossible? Because it’s bodiless. It has no senses, no flesh, no nerves, no pain, no pleasure. It doesn’t hunger, desire or fear. And because there is no cognition — not a shred — there’s a fundamental gap between the data it consumes (data born out of human feelings and experience) and what it can do with them.
Philosopher David Chalmers calls the mysterious mechanism underlying the relationship between our physical body and consciousness the “hard problem of consciousness”. Eminent scientists have recently hypothesised that consciousness actually emerges from the integration of internal, mental states with sensory representations (such as changes in heart rate, sweating and much more).
Given the paramount importance of the human senses and emotion for consciousness to “happen”, there is a profound and probably irreconcilable disconnect between general AI, the machine, and consciousness, a human phenomenon.
I installed Linux Mint on my Lenovo Yoga 7 laptop and it's been great, with the one exception of not really having a tablet mode when I flip the screen. Its not a huge deal, but I watch shows that way and sometimes miss an on-screen keyboard.
The actual keyboard stays active when flipped, which is fine until I pick it up or have it on my lap and accidentally hit some random key.
It seems from some looking around that Mint doesn't do great with this and I'm open to a different distro that's fairly beginner friendly, but even better if there are some options I'm missing to keep what I have.
I use archlinux with KDE and I had to tinker with it for hours if not days for it to properly have an automatic on screen keyboard that is not complete bullcrap. But since then it works. Even on LUKS decrypt during boot.
mint uses X11 which should be considered legacy at this point. wayland (Gnome, Plasma) has all the touch and dock/undock and rotate and pen etc goodies. try it out from a liveUSB and decide for yourself.
Why is mint even recommended to new users at this point. Cinnamon is nowhere near Gnome or Plasma and both of these provide much simpler and more unified experience in things like settings
Muss mir das nochmal ansehen, die Serie habe ich auch seit meiner Kindheit nicht mehr gesehen und ich bin mir ziemlich sicher, dass ich die letzte Folge nie gesehen habe.
Hello, in the recent years I find myself willing to spend much less time and energy on games, but I do still enjoy them. Oftentimes I end up quitting a new game I tried out relatively early on, because I'm encountering some block, grind, non-optional boring side quest, empty open world, uninteresting clutter or details that I have to manage, or similar. Like, I just wanna play the actual game play, see how the story continues, and visit those areas that were designed with care. Not worry where on the map I can sell the glimbrunses I collected so I can buy a 37% stronger glarpidifice that I'll need to beat the next glutrey after which I'm allowed to continue the main story.
Sorry if this turned into some kind of a rant, but I hope it's understandable what I'm looking for and what I meant by fluff. Some games that have fulfilled this for me during the last years:
Stray
Skyrim (there's a lot of fluff you can worry about in Skyrim, but the thing is you don't have to worry about it, you can also just walk in any direction and see what situation you wind up in, at least for the first 10-20h of a playthrough, which IMO is enough time for a game anyway)
Life is Strange
Some Pokémon ROM hacks where the difficulty spikes were not too harsh
Looking forward to hear your suggestions 😀 Games where there is some fluff but you're allowed to just ignore it are also fine, but not having any fluff is preferred. Bonus points for anything on the Xbox game pass.
I usually have a good time with isometric fantasy rpgs in the vein of Baldur's Gate. They don't really have grind, the world is generally well-filled with a relatively dense story and interesting quests (denser than Skyrim at least), and if the game becomes too hard you can turn down the difficulty. Though you do need to actually be interested in the combat mechanics (which are much more complicated than e.g. in Elder Scrolls games) to really enjoy these games, IMO. One downside is that these types of games are usually really long; I've dropped a couple of them halfway because they overstayed their welcome.
Some examples:
Baldur's Gate 3 (don't really need to have played 1+2 to enjoy this one, though they're still very good)
Divinity: Original Sin 1+2
Pillars of Eternity 1+2 (2 has much better combat, but the first one is pretty important to understand the world)
Tyranny (this is a relatively short one)
Pathfinder: Kingmaker 1+2
For more Skyrim-style games, I really enjoyed the Gothic series. I think their level of grind is about the same as Skyrim (probably a little less, but it's been a while), and if you can get past the outdated graphics of the early titles they're quite fun. Especially the dialogues, they aren't as serious as Skyrim's.
I've been using Pop!_OS for a few years now, and it's worked like a dream. Everything works out-of-the-box, and gaming on Linux has never been easier. But it almost works a little too well. Learning Linux as opposed to Windows for all my games was a fun challenge.
But, now that I'm familiar with how to set up any game that needs a little help besides Proton, I'm starting to want to delve into my OS more to see what I can customize, and I think picking a new distro with slightly different architechture will be very nice.
Don't get me wrong, I still want something that works by itself more often than not. But I would love to have something a little more cutting-edge that gives me a little more control.
I started with Linux by installing Kubuntu, and I really miss KDE Plasma. I know Kubuntu is still on Plasma 5, and I've been wanting to find a distro that lets me use Plasma 6.
I've narrowed my choices down to three distros: Nobara, Garuda, and Bazzite.
So far, I've confirmed that Nobara and Garuda come with Plasma 6, but I haven't found that information for Bazzite yet.
So, what do you think about these distros? What are the pros and cons for you?
I'm leaning the most toward Garuda - but I'm worried Arch may be TOO big of a leap. I really just learned that Fedora is not Arch-based, so I know Garuda will be a bit of the odd one out of the three.
TL;DR: Nobara, Garuda, Bazzite - which one is good and do any suck?
EDIT:
Thanks, everyone, for the insightful and helpful comments! From what everyone has said, I've come to find that either CachyOS or Solus will fit my needs best.
CachyOS seems optimized for gaming, while Solus' curated rolling releases seem (to my untrained eye at least) to be somewhat of a step between the way Debian-based distros upgrade and the way Arch-based distros upgrade.
I'd love to hear people's experiences with both of these! I think I'm going to try to dual-boot them and see what setup looks like for both.😄
Bazzite has the latest KDE, yeah, currently reading 6.4 on the latest version. Nobara broke on upgrades for me (I did nothing crazy, basic install and basic upgrade process), bazzite is rock solid and built on a good base (fedora atomic). In general, I fully recommend immutable atomic distros for noobies it all just works and it helps teach you important lessons on data security and containerization
The best thing about atomic linux images like Bazzite is if for whatever reason Bazzite stops releasing new versions you can rebase to a different "distro" and itll have all of your user data and configs intact with a single simple command. With things like Nobara or Garuda, if there is a problem you essentially have to do a clean install.
edit:
And as for Arch, Linux mint, etc., I personally find these distros and advice to be outdated. Upgrades can often break in many smaller linux distros and it is very important to have a strong and reproducible method of upgrading, especially for new users. VanillaOS and Fedora Atomic are currently the most user friendly ways to achieve flawless upgrades.
Is the rebase feature the main thing that sets atomic desktops apart?
Atomic and immutable distros essentially attempt to make each version on every computer act exactly the same to help devs with debugging. This means they shut down a lot of easy access to core system files, instead you have to use special commands to layer new changes onto your distro. These are automatically re-applied every time you upgrade, reducing the chance of breakage.
Rebasing is a fun consequence of this. Fedora Atomic images (re: things like Bazzite, Secureblue, Kinoite, etc) can be swapped out with a simple command or two. If a dev does something you don't like, you can easily swap to a different image without having to do a full migration.
I’m not too worried about having to troubleshoot. Nobara has been appealing to me because it’s developed by the Proton guy.
Most of the kernel mods from nobara are applied on Bazzite. Bazzite and CachyOS afaik contribute to the same set of code there.
How does an atomic distro help teach containerization and data security as compared to a traditional distro?
Since you cannot easily modify system files, you need to use containers to make certain very technical (and often insecure) things work. DistroBox is the main method for this, and as a plus side, it lets you install programs with commands from any distro. I can use the AUR (an arch linux feature) on Bazzite (Fedora atomic) with DistroBox if i want, for example. There are some other things that come preinstalled on Bazzite that help with this, such as flathub and brew.sh
Correct. Atomic distros don’t apply the update, unless it is ready to be applied successfully all together, usually with an option to restore the previous state, without the need of something like btrfs snapshots.
With Nix(-OS) as an example - your bootloader entry is just a reference a giant list of what you need to get out of the Nix store, to achieve the config you want. Many of those can coexist in the same system as a result, including different versions of the same package
This setup won’t really teach you anything different in relation to containers though.
If you want to play with Atomic distros I'd recommend you do that in a virtual machine in KVM first. They are quite restricting which is good for the distro developers to make consistent releases and experiences for users, and secure, but not necessarily the best option for tech savvy users.
There are ways around the restrictions but you can reach points where the compromises you have to make are too frustrating. If you find that out late down the line after setting up your desktop it can be very annoying. Also I do use Flatpak, but it's not the most efficient way to run software. Atomic distros have more overhead due to the need to use flatpaks or distrobox and the like to get everything you might want.
Atomic distros are a neat idea but I personally love tweaking every element of my install and optimising or customising it. So I use a rolling release distro, have my home folder on a separate partition, and back up regularly.
I use Garuda on my daily driver and I love it. I distro hopped for years and I'm finally home. It's not hard like trying to do your own Arch from scratch. It's like some super geek setup Linux for me with all the bells and whistles just the way I want it. I had to ditch the dragon theme and then it was perfect. And snapper is so well setup and integrated with Garuda, there's rarely a case where a clean install is warranted. I highly recommend it.
Hmm, that's a serious downside for me ngl. I tried to set up Mod Organizer 2 when I had Steam installed through Flatpak on Pop!, and I had to switch to the Ubuntu repository to get it to recognize my Steam install.
Kubuntu 24.10 is on plasma 6.1; not sure why you thought it was on plasma 5? Maybe you were thinking of the Long Term Support release which has a much longer release cycle and favours stability over cutting edge; that probably is still on 5? But personally I stay away from Ubuntu distros due to snap.
If you really want to learn Linux and game, maybe pick a distro that is not optimised by default for gaming and optimise it yourself?
I'm on OpenSuSE Tunbleweed and have optimised it myself to game how I want. It's rolling release so I'm on KDE Plasma 6.4. It's not difficult to do although I haven't gone quite as far as kernel patching that the gaming focused distros offer.
Another challenge is Arch - it's really not as difficult as people think and even just setting it up in a virtual machine helps you learn alot about Linux fundamentals without throwing the baby out with the bathwater. I've learnt alot using KVM to create virtual machines, and even have a Win 11 machine set up just because I can.
Another route to consider which I also do is get a SBC like a Raspberry 5 and look into setting up self hosting of services like Home Assistant etc. Again you learn Alot about how Linux works in the process and you can keep your main PC running for games without having to move. There is a whole self hosting community on Lemmy with loads of different routes to go, and lots of different manufacturers these days.
There are lots of options beyond changing distros. But also changing distros can be fun and a nice way to reset and make something new.
I think those three will be completely fine, but also I think base Arch would be completely fine for you. I have no idea why it's a meme that Arch is so "hard". I wouldn't recommend it for someone coming from Windows or Mac who has no idea what they're doing and had no poweruser tendencies on Windows/Mac either. But for someone who's used Linux for a few years, I think doing a base Arch install is no biggie at all. It's got a very annoying meme reputation but I think it's completely inaccurate.
That's an aside, and I'm not saying you should use base Arch, just that I don't think there's anything wrong with it if that's something you're interested in. Although if you're coming from a "beginner" distro and your intent is to learn, I do think doing a base Arch install (even if you don't stick with it) is a good idea. You'll be entirely capable of the install process and probably get a better understanding of how your system works. Then after you install it you can switch to some other distro you prefer.
Like OP said, you can get Plasma on Bazzite, as well as install it right on a SteamDeck if you have one. It's constantly being updated, and if gaming is your main driver, Bazzite goes out of its way to make things work. In theory you wouldn't have to do any tinkering to get games running, with the added bonus that you won't be messing up or introducing any entropy to your system files. If something does go wrong, you can reboot into the previous release and it'll be back to where you just came from.
There's still plenty to learn if you want to, it's just not the traditional Linux distro setup.
So, Bazzite does have a KDE 6 variant, and works very, very well, especially on a handheld PC.
It takes the approach of sandboxing off the core OS, but giving you a bunch of tools for running flatpaks and other things, set up DistroBox to semi-sort of have multiple linux os's simultaneously if you want to say, compile something from source that only has proper dependencies figured out in... not Arch, what SteamOS is based on...
I run it on my SteamDeck because it offers more ability to use it as an actual PC, while still being rock solid in gaming mode.
But uh... for more discussion... I'm going to kind of not answer your question and suggest something else:
Basically, much like Nobara is a 'gaming-tuned', optimized, cutting/bleeding-edge version of Fedora...
PikaOS basically is that, but for Debian.
If you're used to using PopOS!, well, that's ultimately Debian based, so there may be less of a learning curve now that you're broadly familiar with the Debian environment.
PikaOS works with GNOME, KDE, Hyprland if you want an even lighter weight DE.
They are also working on a Handheld PC capable out of the box distro, but its not ready yet.
From what I've seen from various youtubers... PikaOS is trading blows with Cachy and Nobara for getting the highest frame rate out of a game, on a same hardware / same setting FPS comparison... sometimes it is actually beating them.
Uh also, yeah, look into CachyOS, it seems to be the latest hotness for an Arch based, gaming optimized, but widely functional for 'whatever' OS, if you're curious about trying out Arch, and of course thus being able to constantly let every one know you use Arch, actually.
But, now that I’m familiar with how to set up any game that needs a little help besides Proton, I’m starting to want to delve into my OS more to see what I can customize, and I think picking a new distro with slightly different architechture will be very nice.
Don’t get me wrong, I still want something that works by itself more often than not. But I would love to have something a little more cutting-edge that gives me a little more control.
Fam, did I understand you correctly that you want to tinker/tweak/customize the system to your heart's content? Yet, you also wish that the system "just works". At least, mostly. Is that right? Or..., like could you perhaps be more clear on what it is you'd like to tinker/tweak/customize in the first place? Please, if possible, be explicit.
After I got a better idea on what it actually is that you seek, I'll try to answer your other(/remaining) questions.
I suppose that's fine, and please feel free to act however way you wish.
The fact remains, however, that no one actually delved into the essence of the matter.
Furthermore, I find it rather troublesome that you deflected the question rather than answering it head-on. Perhaps you didn't think it through yet, and are just waiting to be swayed by whoever advertises best.
To illustrate my point, would you (at least) be so kind to explain me where/why Fedora has lost your favor? While, on the other hand, what Solus provides (in contrast) to justify your interest in it?
Do you think I am using this thread and this thread alone as my only source of information on these distros? I'm crowdsourcing opinions and checking them against the documentation for the distros and my personal preferences.
I feel as though this thread has delved into the essence of the matter perfectly well. That matter being, of course, people's opinions on the three distros I laid out. I deflected your question because you are looking to pick my brain and start an in-depth discussion, but I've reached a point in my research where I'm comfortable making a choice without any more guidance.
And, well, idk, I feel like my statements indicated I was looking for a good middle ground between a stable system that works smoothly and something I can crack open and break while tweaking - for the learning experience. I suppose that would really just boil down to fixed vs rolling release distros.
Fedora has lost my favor due to being a fixed release distro. After CachyOS was brought to my attention, and I researched it a little bit, it seemed to fit my desires pretty well. It's optimized for speed, which is perfect for games, and it's rolling release so I still get to feel like an uber haxx0r. Nothing against Fedora, it seems great. I want something a little further from my comfort zone.
Solus is appealing to me because it isn't based on anything else, and I love that it's a small team. Plus, the weekly updates thing they do felt like a good middle ground between how Debian-based and Arch-based distros work in terms of updating. But, I think I'll stick with CachyOS for now, I'm excited to use Arch btw.
Do you think I am using this thread and this thread alone as my only source of information on these distros?
No, I don't think that. I'd even challenge that notion as your query didn't start with a simple "What's best?" but instead asked for a comparison between three distros that were (somehow) selected by you. Please feel free to enlighten me on what made you even consider the premise of your above question. Though, as this is not that important to begin with, it's also perfectly fine to ignore that 👍.
I feel as though this thread has delved into the essence of the matter perfectly well. That matter being, of course, people’s opinions on the three distros I laid out.
If you lay it out like that, then; yeah, surely. However, it seems we fundamentally differ on what the essence of the matter is. And, perhaps I'm at fault for thinking this is a beneficial exercise to begin with. Regardless, I feel I at least owe you an explanation that goes over where I'm coming from:
Fundamentally, literally none of your original three distros serve you well for the purposes of "I’m starting to want to delve into my OS more to see what I can customize". Each one is pretty opinionated (by default^[Garuda is exempted from this through its KDE Lite offering.]) and -heck- both Bazzite and Nobara come with (highly) specialized tools required for system maintenance. This is because they've identified that there's a very serious disconnect between the freedom they'd like to allow their users and the (otherwise almost insurmountable) complexity this adds to how upgrades are managed. Bazzite trusts Fedora Atomic's tooling for this, while .
Being (highly) opinionated isn't necessarily bad. But it's undeniably easier to tweak/tinker/configure a more minimal system. Hence, you're better served by a lean install (with sane defaults). Thankfully, community members either recognized this and tried to sway you towards other options. With success*. Or, you were able to discern distros that better serve you from the communities' input. However it may be, both CachyOS and Solus are definitely better in that regard. Though, crucially, if the community strictly kept to discussing the original three distros and didn't go out of their way to venture into unexplored waters, then you wouldn't have arrived where you are right now.
Anyhow, all of the above could as well be disregarded the very moment you (hypothetically) state that your idea of customization is limited to the avenues KDE Plasma offers. Because, the original three are perfectly suited for that. So, your ideas on what tweaking/tinkering/customization entails is fundamentally linked to the distro that's most fit for the job.
And thus, I would distill the essence of the matter to be a clear idea on what kind of balance between "stability" and "customization" is envisioned as desirable by you. And, while at it, proper delineations of what is and isn't understood as stability and customization. Is the requirement of stability only satisfied if you can easily rollback to a proper working state? Or, is borking on a random update simply unforgivable? On the other hand, do you really want to compile your own kernel and install it? Or were you merely interested in KDE's knobs? Etc. etc.
and start an in-depth discussion
Not necessarily, answering "Or…, like could you perhaps be more clear on what it is you’d like to tinker/tweak/customize in the first place?" would probably have been sufficient.
something I can crack open and break while tweaking - for the learning experience
There's so much we could go over in the paragraph the above text is found, but I'll instead limit myself to just the above text. I find myself in a conundrum when you present that the above was implied and that (somehow) you came to consider Bazzite. While Bazzite is a lot more customizable than people give it credit for, I would not describe any part of the experience as "cracking it open". So, when met with an oxymoron as such, I literally have to ask for a clarification.
Fedora has lost my favor due to being a fixed release distro.
You've stated somewhere that you "Love the idea of rolling releases". So, if Solus passes as a rolling release distro ^[To be clear, technically, it absolutely does.], but has less uptodate packages than Fedora's previous release^[So I'm not even comparing it to Fedora 42 or Fedora Rawhide (i.e. its rolling release branch).]. Then, what is it intrinsically that makes it favorable as a rolling release? And I haven't even delved into why Fedora's release cadence is referred to as semi-rolling or how the latest updates to packages like GNOME arrive earlier in Fedora compared to even Arch. Btw, this is not meant as one big advertisement for Fedora. Instead, I want to point out the many many nuances that exist within the Linux landscape.
After CachyOS was brought to my attention, and I researched it a little bit, it seemed to fit my desires pretty well. It’s optimized for speed, which is perfect for games, and it’s rolling release so I still get to feel like an uber haxx0r.
But, I think I’ll stick with CachyOS for now, I’m excited to use Arch btw.
I agree that CachyOS is one of the better fits. And if you're not interested to check out Arch, EndeavourOS or openSUSE Tumbleweed(/Slowroll), then I can't even think of another rolling release worth considering for you.
I love that it’s a small team.
I don't know why this would be preferred over a big team 🤔. Mind helping me understand this?
Btw, to be clear, Solus, as a project, is currently not very healthy. While it could compete with Fedora and openSUSE in the past, the last couple of years haven't been very kind to it. I'd propose the idea that the departure of its founder (i.e. Ikey Doherty) from the project has left it (relatively) visionless. And the turbulent times that followed made nurturing its community a great challenge. One, I'd argue, they weren't able to handle gracefully. Regardless, it's undoubtedly a shell of its former glory. This is also reflected by how relatively bare-bones its repository is. Or how absent it is within the discourse. Hopefully it will be able to bounce back after goodies from Doherty's latest project (i.e. AerynOS) trinkle down to benefit Solus. But, until then, it would be very irresponsible of me if I didn't discourage you from daily-driving it...
Some basic usage tips for users new to NobaraNotes/Edits:1, Ignore the mouse cursor graphical glitch, its due to the recording desktop capture, not present o...
See, this is what I meant. I deflected because my phrasing gave everyone else enough information that they could just suggest a distro.
I appreciate that you've clearly put thought into the recommendation you want to give, and I appreciate that you'd like to really understand what I'm looking for. But at the time of your original comment, CachyOS was baremetal on my machine. So, I've already picked what I want, and you're insisting I must explain in greater detail so that you may answer my question (already been answered).
Please feel free to enlighten me on what made you even consider the premise of your above question.
The fact that you were insistent no one "delved into the essence of the matter." I didn't need them to, I was researching every OS that anyone mentioned.
but instead asked for a comparison between three distros that were (somehow) selected by you.
They're all gaming distros, dude. I felt like that was evident.
I'm sorry this whole post discussion has not gone the way you wanted, but it's gone the way I wanted. And I believe I've found something that works for me.
But, in the end, it ain't Sophie's Choice. I have my important files on a thumb drive and a backup thumb drive with Pop!_OS in case I need to start fresh again. NBD.
Fam, with all due respect, and please correct me if I'm wrong, but I don't think you've 'properly' engaged with my previous reply. Don't get me wrong, it's your absolute prerogative to disregard/move-on/disengage/let-go especially if you're already moved on. The daunting task to read a wall of text concerning a subject you've internally closed/'solved' ain't everyone's cup of tea anyways. The reason I've brought this up, is because most of how I would respond to your latest reply is already contained within my previous reply 😅. As such, I will refrain from reiterating what I've said before for the sake of brevity. Instead, I'll try to strictly address the unaddressed. I'll also take the liberty to assume that you're not a fan of consuming long-form content. This will also be reflected in the remainder of this reply.
my phrasing gave everyone else enough information that they could just suggest a distro
Suggesting a distro ain't hard; CTRL + click here consecutively to get a random stream of distros. Even if we would limit it to the union of gaming distros with (semi-)rolling release distros, there's a lot to choose from. As such, mentioning what's out there ain't impressive. But expertly navigating between them sure as hell is.
Granted, suggesting a (new) distro wasn't even the objective. You wanted comparisons... Or, rather, I assumed you did.
CachyOS was baremetal on my machine.
It would probably have saved us both a bunch of trouble if you had been transparent/explicit about this. I can't read your mind nor do I like to assume stuff.
but instead asked for a comparison between three distros that were (somehow) selected by you.
They're all gaming distros, dude. I felt like that was evident.
Please allow me to clarify that it wasn't entirely clear why these gaming distros were specifically selected, while others like CachyOS, ChimeraOS, DraugerOS, Jovian-NixOS, PikaOS and Regata OS were not.
I'm sorry this whole post discussion has not gone the way you wanted
Fam, I got literally no stakes in this discussion. Apologies if I made you uncomfortable (or something) by making you think otherwise. I was merely in it to help/assist/support/aid you to the best of my abilities. For this, I required more input so that I wouldn't have to succumb you under multiple walls of text. I didn't think asking you to answer "could you perhaps be more clear on what it is you’d like to tinker/tweak/customize in the first place? Please, if possible, be explicit." was unreasonable. But perhaps I was wrong.
but it's gone the way I wanted. And I believe I've found something that works for me.
I sure hope so, fam. I wouldn't want to see you return with your tail between your legs.
I used Solus for years, it was actually my first long time Linux distro, and I have fond memories from that time and deep appreciation of the project. Note that I say used, because I have moved on (to EndeavourOS and later NixOS).
The reason why I moved on is the same as why I would recommend against Solus: the project have lost a lot of its core contributors. At the time I left there were no package updates for quite some time (used to be weekly).
I am not quite sure Solus really got a future. There are talks about converging it with AerynOS, former SerpentOS, which is innovative but still experimental software built by the original team, i.e. those that left Solus in the first place. Though they are really proficient in making the software, I do not think they have the same skillset for securing longevity through contributions.
In the end you should not care too much what people think. You will get the popular options for the intersection of Lemmy and Linux users, but popular is not always good nor what is right for you. Just try stuff and be ready to move a little through rigorous backups, you do have backups?
Hmm, thank you for your point about Solus. I was interested because it seemed the most interested in the desktop experience. But it does seem they're updating and getting back on track. I love the idea of a weekly rolling release for beginners who still need the idea to click.
Solus is a great choise for desktop. The Solus team is doing well lately. 😀 They have even weekly updates on updates. Really great comminication towards users.
I ended up going with CachyOS because I feel confident enough to try Arch now, but I think Solus is going to be my go-to when recommending for beginners, once I try it a bit more. I think it's a good blend between stable and cutting-edge, plus getting to tell people that you won't have to replace it with Solus 2 eventually is kinda a big selling point.
I tried Endeavor and in classic fashion installed something that lead to a bunch of issues down the line. Not sure exactly what I did, swapped to Bazzite and have been enjoying learning the way it works.
Neonazistische Jugendbanden wie Deutsche Jugend Voran verbreiten immer mehr Angst und Schrecken. Nun weist der Verfassungsschutz sehr deutlich auf die Risiken für bestimmte Gruppen hin.
Mit etwas Interpretation kann man einen makaberen Witz daraus machen. Den Kommentaren nach scheint das primär nicht so gemeint zu sein.
Benjamin, ein Elefant im Zoo, der, zwinker zwinker, sprechen kann und den Zoo verlassen kann, also nicht wirklich eingesperrt ist.
Bibbi, die Hexenkraft nutzen muss, um ihre Probleme in der kapitalistischen Welt lösen zu können und dabei ihr Hexensein nicht offen ausleben kann.
Peter, der den bourgeoisen Traum der freistehenden Villa im Bauwagen auslebt und sich dabei in einem schwelenden Streit mit seinem Nachbarn befindet.
Ernsthaft gefragt mangels Erinnerung: warum sind Benjamin und Bibbi sozialistisch? Bei Peter kann ich das über das Vorleben von Konsumkritik nachvollziehen.
The only comparable I was able to find is Bitwig Studio, but it's quite expensive and I wasn't doing so much music so I stopped making electronic music instead.
Not too long ago I broke down a the costs between Ableton and bitwig, and they are quite similar over time.
Ableton has the big #'rd updates where as bitwig you get all updates within a year from license activation.
Since BW will still run after the license runs out (you just cant update to any new versions) I don't always update until there is a new feature that I want to work with drops in an update.
I also limit purchasing licenses to sale periods as a license can sit on the shelf until you're ready to activate it - this significantly reduced the cost for me.
I think there are other ways to go about this though on the vast sea of the net if your sails catch the wind right ;). If you're making stuff for fun and not for profit I think everyone should have access to creative tools.
If you make money than it's worth considering sending some. money their way. ¯_(ツ)_/¯
I haven't personally used Ableton ever but am a hobbying musician, and pro-audio is possible on Linux as well as running non-native applications via Wine. I found this just searching, there's apparently a Discord group also dedicated to this project.
Usually doing a web search like "xyz windows program+linux" will produce results, and putting in your distro name will produce better. Anyway, good luck on your journey!
A Repository for All Things Related to Running Ableton Live on Linux, part of the newly formed Ableton on Linux Discord Group. - BEEFY-JOE/AbletonLiveOnLinux
I always seem to run into roadblocks I can't figure out when I try to use wine and windows virtual machines. Dual booting is a hassle but afaik it's the least difficult way to go.
I am a hobbyist and was using ableton live before. As mentioned by others, unless you dual boot - try bitwig studio for similar experience. It is from people who worked in ableton. Have a trial, pirate if can't afford now.
Foss alternative - ardour is great, but you will have to bring your own plug in suit.
Yabridge tool can help you to run windows vsts on Linux, but not everything works. And beware - it does not work with flatpak version Bitwig, at least it did not.
I suspect a VM would introduce latency (big no no for music production), and I can't imagine getting ASIO working would be easy (though I've never tried it).
According to WineHQ, Ableton's compatibility with wine isn't stellar. FL Studio works quite well in it, but switching DAWs can be a pretty major undertaking.
For Linux native DAWs, Reaper and Bitwig are the two best options. Reaper is the most affordable at 60 bucks, with an infinite free trial.
It’s frustrating, considering that ableton’s push runs on Linux, but I never had a satisfactory, or comparable experience running it on a Linux desktop. To be honest, this was the dealbreaker that kept me using a Mac.
I personally reckon they're working on something YAbridge-esque to allow people to bring their VSTs to the push in standalone mode. If they can actually nail that, it's an absolute no brainer to then release a full Linux version of the DAW and finally allow people like me to make the switch
Every time I've tried to run Ableton on Linux over the years (most recently about Christmas last year), it's the VST support that lets me down. I've got hundreds of VSTs I've used in various projects over the past couple of decades and I can't switch unless I know they all work properly—projects not loading or sounding different is unacceptable. I need to be able to open anything I've worked on over the years and be able to get right into the creativity without tinkering, as that is what I already have today.
Until that day, I've got to begrudgingly keep windows around.
Yeah that sounds about right - VST is such an awful standard, and is only made worse by all the copy protection nonsense that companies pile on top of it. I wish there was an open standard that was cross-platform, portable and used PGP encryption for standard licencing, but alas, it's too late for that.
I can greatly recommend Reaper to you, in case Ableton + Wine doesn't work out.
I only recently got into music making as a hobby so my overall perspective might be limited, but other DAWs I tried included: * Ardour * Bitwig * LMMS * Zrythm
I settled with Reaper bc of it's customizability, freedom in workflow and cheap price without compromising in pro features. It's actually completely free as long as you are evaluating buying it, which is up to you for how long. And the customizability is off the charts compared to any other DAW.
But what really sold Reaper to me was the lack of hurdles that got into my way of learning to make music.
I started on abelton and moved to bitwig around 3.X and have been with it ever since.
I love all the different modules and the grid which has give me a lot more expressive control over my sounds.
they are similar yet different; I believe the core bitwig team were ex ableton devs who wanted to take things in a different direction.
I know it's silly but one of the biggest things that I like about bitwig is customizable shortcuts; this is especially good if you're coming from ableton because if your a shortcut key wizard you can easily remap similar functions.
if you've got an extensive VST collection you can run them with wine + yabridge.
Bitwig is not the only option, but coming from ableton if you want to run single boot it is the most similar (IMO) to Ableton.
Happy to answer any questions you may have about it as well.
There are several commercial options for Linux. The most-Ableton software out there is Bitwig Studio that has a Linux port. However, it's expensive. The cheapest commercial solution, with a bit of learning curve but powerful nonetheless, is Reaper.
However, if you want to go 100% open source, there's Ardour and LMMS (which is a lot like FL Studio). Ardour 9, which is expected by the end of the year, will be more MIDI-friendly than it used to be. LMMS latest git version (offered as binary on their site) has some good new features compared to their stable version, however, there's still no vst3 support.
I'm an visual artist and I used Photoshop for years to edit my hand-painted scanned paintings. When I moved to Linux, and Gimp3 was out, I was finally ready to leave Photoshop behind. Some features of Photoshop aren't there, but I was ready to leave them behind. Same with video, I used to have a rather popular blog about color grading with Resolve. I moved to kdenlive, which has none of these tools or plugins. It's a decision that I simply had to make. I wanted to use foss tools, and that was the price to pay. I'm cool with my decision.
If you gotta go commercial, go with Reaper. The people (a small team of 3 or 4 I believe) behind it are really cool, and they're doing it for the love of it, their profit is very small.
Yes, but you said you were using Resolve for color grading. My understanding is you should still be able to use that on Linux, but I haven’t tried it yet myself.
If you want to use Ableton, then Install it with wine, if you sandbox the prefix copy the VSTs inside the prefix and use them thru Ableton.
Some VSTs may not work or could have some graphical glitches. For example with Serum sometimes some widgets gets black until I pass hover with cursor. There is a fix for this which didn't work for me that's about disabling "d2d1.dll" and installing "gdiplus".
Otherwise you can use a Linux native DAW and use VSTs with wine. Check yabridge and LinVst.
I'd suggest no-one ever dual-boot Windows with anything. There are to many mishaps when Windows takes it into their head to fuck the bootloader.
Put the OS into a VM. If you only use Windows for one app put Windows into the VM. Otherwise put Linux into the VM until you find you're mostly using Linux.
I have set up a good hand full of dual booted Windows/ Linux machines. Never had any major issues. However, I also noticed that I only use Linux except for games and that's slowly changing, too, so I would suggest trying the dual boot if it makes you more comfortable to realize yourself that you don't need it.
Few weeks ago I have noticed that my Presonus account is offering me to download Studio One Pro 7, in deb or flatpak format. I use Linux desktop for everything except audio work (still use Windows machine for that) so when I checked my Presonus account from Linux box I was quite shocked.
Sadly, attempt to upload the image from the phone (using Boost app) doesn't work so I can't upload and can't be bothered to upload elsewhere then share URL, etc.
I couldn't get bothered to try installing it earlier since I don't want to run S1 on this box.
But just for the sake of it, I have now tried installing flatpak file and it completed.
I don't use flatpak much but trying to do...
flatpak run com.presonus.studioapp7
... failed with "Failed to connect to Wayland display".
I spent 0 seconds on reading about S1 Pro for Linux and have no intention to bother with it further but if you do use S1 on Windows you might have Linux download available as well. Give it a try if you are interested.
What exactly it requires to run, I have no idea.
But it is really surprising development.
Edit: hah, after i removed that flatpak i just installed, a notification popped up saying "Studio One is a Wayland application and won't run in X11 session."
The .wav format is actually very simple. You should be able to write a bash script to produce wavs without too much trouble. If you'd rather not work that low-level you can always use the DAW features in emacs.
I recently started playing around with Reaper on Linux. It's no different from it's windows counterpart. You can use something like yabridge to use third party VSTs. All I had to do was point it to my VST folder and viola, almost all of them work. The only problem I have is that none of them work graphically. The sound works and they render just fine but for some reason clicking on a knob or button is waaaay off. For example in Pro-Q, if I put the mouse by the top of the plugin the frequency knob will highlight like the mouse is on top of knob. Nothing happens if the mouse is actually on top. This may be a yabridge issue. Their GitHub does say Wine versions greater than 9.22 don't work. I'm on the latest Wine and haven't fucked with different versions yet. If the fix is that simple then the experience is no different for me at least. Otherwise I just have to use the UI-less mode where Reaper turns the plugins into a series of sliders you can adjust instead.
Like many others have suggested, you may want to try Bitwig. I understand that it's the alternative DAW that is the most similar to Ableton. The company was started by a group of ex-Ableton employees, so it's not a coincidence. Many people online feel that it's in general a better DAW than Ableton, so you may end up liking it. It supports Linux natively, even provides an official flatpak (or Ubuntu installer?)
It's not as expensive as some make it out to be, and it's on sale right now for a few more days. I just yesterday bought Bitwig Studio Essentials. They have 3 editions and Studio Essentials is the starter version, currently $79 (reg. $99). The next level up is Studio Producer, currently $149 (reg. $199), and the top level is just Studio, currently $299 (reg. $399). They also offer rent to own for $16/month for 25 months on Splice.
Welcome to a new issue of This Week in Plasma!
Every week we cover the highlights of what’s happening in the world of KDE Plasma and its associated apps like Discover, System Monitor, and more.
I've never understood our societies obsession with when men lose their virginity. You see it in media all the time like in 'The 42 year Old Virgin' and 'Last American Virgin'. It seems to be a bigger thing with men then women. Can any men here confirm?
Why does it matter when someone loses their virginity? If you ask me it's no one's business to when someone loses their v-card. People should lose it when they feel comfortable to. I hate our societies insistence that men lose it before the age of 18. Like if your an adult virgin our society sees it as a personal failing that makes you a loser. I never understood it myself. It's frankly ridiculous.
The thing is that for most men, it's not voluntary when they don't 'lose their v-card' for a long time, it's that they can't find a partner. Someone who never managed to find a partner despite trying typically doesn't exactly feel like a winner, so they tend to at least somewhat agree with the popular sentiment that older virgins are 'losers'.
It's true that this isn't really other people's business, especially not if they're only using it to put people down instead of trying to improve things. Though this is certainly an issue on a societal level.
So who is the one supposedly having "tall poppy syndrome" - is it the people who critize/put down the "tall poppies", or the "tall poppies" themselves? Or perhaps society itself?
This is such an odd way to pathologize a social phenomenon.
Spotify, the world’s leading music streaming platform, is facing intense criticism and boycott calls following CEO Daniel Ek’s announcement of a €600m ($702m) investment in Helsing, a German defence startup specialising in AI-powered combat drones and military software.
The move, announced on 17 June, has sparked widespread outrage from musicians, activists and social media users who accuse Ek of funnelling profits from music streaming into the military industry.
Many have started calling on users to cancel their subscriptions to the service.
“Finally cancelling my Spotify subscription – why am I paying for a fuckass app that works worse than it did 10 years ago, while their CEO spends all my money on technofascist military fantasies?” said one user on X.
Spotify, the world’s leading music streaming platform, is facing intense criticism and boycott calls following CEO Daniel Ek’s announcement of a €600m ($702m) investment in Helsing, a German defence startup specialising in AI-powered combat drones an…
System is Fedora KDE, graphics card is an Asrock Radeon 5900GRE, display is a Gigabyte M34WQ (1440p ultrawide 144Hz refresh rate) attached via DisplayPort.
Despite being on a UPS (which...we're also going to have to talk about) my system was apparently shut down by a thunderstorm. I booted it up, and the display was acting glitchy. I would get two mouse cursors, and below the mouse cursor the screen would go a solid color, as if it was glitching on a pixel and then displaying that from there down.
Switching to a lower refresh rate made the problem go away, I've switched back up and it seems to be alright. A second 1080p60 monitor attached via HDMI didn't show any problem.
Some googling didn't turn up exactly what I was experiencing. Can anyone help troubleshoot this? It seems okay for the moment but I'm hoping I don't have a wounded GPU.
Probably surge damage, honestly. Was your monitor plugged into the UPS or another surge protector, or just into a wall? Do you have any other cables connecting to your machine that aren't on the UPS or a surge protector? Also, a power strip is not equal to a surge protector.
As far as the cause, if you're seeing artifacts on screen past a certain position on the screen, that's the screen or cable, not the GPU. Your display adapter sends fully rendered frames to the display and wouldn't have a specific part of the frame that is corrupted if damaged. Anecdotally speaking, if a GPU has damage, it just won't work.
Also, you may want to check the capacitors on your card and motherboard to make sure they're all still flat and not bulging. If bulging, you took took surge damage and need to redo your cabling to make sure everything is protected.
Everything is attached to the UPS, both the computer and the main monitor are on the battery side. Why the computer was shut off on this UPS, I don't know. I might be switching brands of UPS.
If I switch it down to 60 or 100 Hz, the problem goes away entirely, so I don't think it's a hardware damage issue at this point. Like, I did a software update, I wonder if it's booted up with a slightly newer version of mesa or wayland or something that isn't playing nice.
Check your package manager logs to find out. Also check dmesg just in case.
Edit: you know what...try changing the outlet the monitor is plugged into and see if anything changes. Curious if the signal is weird or the rectifier got damaged by a surge. Maybe try the wall as well to find out if it still does it.
Switched the socket on the GPU the DP cable is plugged into, I think I see the same problem. It's only been a few seconds, I haven't seen the "lower portion of the screen from about the mouse down goes one color" thing yet but I have been seeing a double mouse cursor. This goes away completely when setting the frame rate down to 100 (says 99.98 in the KDE settings menu).
Not sure what I'm looking for in package manager logs or dmesg.
Right now, if I set KDE's settings to 100 Hz, everything looks fine. If I set it to 144 Hz, sometimes I see a double mouse cursor. I get a second cursor about an inch to the right of what seems to be the actual cursor.
Explain how a problem with the UPS will cause that symptom.
When you increase your resolution, your monitor switches power modes. At a higher refresh rate, a dirty power signal can cause artifacts on the screen. Usually this means that you'd see bit crawl on the edges of the screen, but it could show display artifacts like you describe depending on the panel controller.
If your UPS took a hit during a thunderstorm, you could easily have a damaged rectifier in the UPS. That rectifier is responsible for smoothing the power signal coming out the ports on your UPS. A dirty signal can do the above as I mentioned.
You wouldn't notice a problem on your machine because it's own PSU smooths those signals out, but a monitor doesn't have that.
I'm still skeptical that it would cause problems that minor, prior experience tells me it would do something like work fine at low resolution and show no picture or boot loop or something at higher resolution, but for the sake of troubleshooting when there's less convective activity on the radar I'll try plugging it straight into the wall.
I have an AOC AG272FG4 which has started to show artifacts like this and this, the image also becomes choppy and unresponsive but only what it's displayed not the pc itself. It started happening...
Apparently the power failure just happened to coincide with a kernel update that causes a bug with AMD firmware; people are reporting the issue with higher end Radeon 7000 series cards using high refresh monitors attached via DP with kernel 6.15.
My uname -r output: 6.15.3-200.fc42.x86_64
So I can either learn how to revert to kernel 6.14 on Fedora, I've never messed with it before, or live with 100Hz like a bronze age slum rat until they push a fix.
The further mystery is why a momentary power loss took down a PC plugged into a UPS. It has one job, that it apparently didn't do.
I had this same issue, as others have stated it seems to be related to higher refresh rates, as the highest I can go without this issue is 99.95Hz. Operating System: Fedora Linux 41 KDE Plasma Version: 6.4.0 KDE Frameworks Version: 6.15.
Call the UPS manufacturer for coverage, if that fails then call your renters or homeowners insurance, and if that fails I hope you bought an umbrella policy.
Most humans with two ears have a pretty good sense of directional hearing. However, you can build equipment to localize audio sources, too. That’s precisely what [Sam], [Ezra], and [Ari] did for their final project for the ECE4760 class at Cornell this past Spring. It’s an audio localizer!
The project is a real-time audio localizer built on a Raspberry Pi Pico. The Pico is hooked up to three MEMS microphones which are continuously sampled at a rate of 50 kHz thanks to the Pico’s nifty DMA features. Data from each microphone is streamed into a rolling buffer, with peaks triggering the software on the Pico to run correlations between channels to determine the time differences between the signal hitting each microphone. Based on this, it’s possible to estimate the location of the sound source relative to the three microphones.
The team goes into great deal on the project’s development, and does a grand job of explaining the mathematics and digital signal processing involved in this feat. Particularly nice is the heatmap output from the device which gives a clear visual indication of how the sound is being localized with the three microphones.
Flickerby
in reply to cheese_greater • • •cheese_greater
in reply to Flickerby • • •RampantParanoia2365
in reply to cheese_greater • • •cheese_greater
in reply to RampantParanoia2365 • • •Godric
in reply to cheese_greater • • •cheese_greater doesn't like this.
cheese_greater
in reply to Godric • • •