Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated
macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!
Δελτίο αντιπληροφόρησης κάθε Δευτέρα στο ΚΡαΧ. Σήμερα θα ακούσουμε: – Ανοιχτή επιστολή ενάντια στην σύμβαση του υπουργείου Υγείας που παραχωρεί σε ιδιώτες την αποκλειστική επεξεργασία και κατοχή γενητικού υλικού 100.000 νεογέννητων στην χώρα. – Δελτίο Τύπου από την Πρωτοβουλία Κρήτης ενάντια στις εξορύξεις υδρογονανθράκων για την ημερίδα της Ιεράπετρας, ενάντια στις πετρελαϊκές εταιρίες και τα σχέδια τους στο νησί. – Το Αυτοδιαχειριζόμενο Κυλικείο Νομικής τοποθετείται για την εκκένωση, τις συλλήψεις και τις δράσεις αλληλεγγύης. – Ρεπορτάζ από την μοτοπορεία αλληλεγγύης στον Παλαιστινιακό λαό στο Ηράκλειο από τη σελίδα Μια φέτα καρπούζι . -Κείμενο από την ανοιχτή συνέλευση για την κρατική δολοφονία του Κώστα Μανιουδάκη και κάλεσμα σε συγκέντρωση στα δικαστήρια Χανίων την Πέμπτη 22 Μαΐου στις 11:00 για την επίσπευση της διαδικασίας της κύριας ανάκρισης. Δελτίο στο Κοινωνικό Ραδιόφωνο Χανίων απόψε στις 7 το βράδυ. Συντονιστείτε στο https://kpaxradio.live/.
Δελτίο αντιπληροφόρησης και σήμερα στο Κοινωνικό Ραδιόφωνο Χανίων. Περιλαμβάνει: – Τις εξελίξεις από τη δίκη για τη δολοφονία του Κώστα Φραγκούλη – Κάλεσμα του συντονισμού συλλογικοτήτων Βόλου για πανελλήνια δράση με αφορμή την δίκη των βασανιστών του Βασίλειου Μάγγου – Εξέγερση στις φυλακές Κέρκυρας για τις άθλιες συνθήκες κράτησης – Άρθρο από την εφημερίδα Άπατρις με τίτλο ΄μέχρι οι αγνοούμενοι να επιστρέψουν’ με αφορμή το ναυάγιο της Πύλου – Υπόθεση Λίνεκερ και BBC από το περιοδικό HUMBA με θαυμαστικό -Συνέντευξη του εθελοντή γιατρού στη Γάζα, Χρήστου Γεωργαλά από την @efsyn_newspaper -Κάλεσμα για την διοργάνωση του 19ου Αντιρατσιστικού Φεστιβάλ Χανίων από το Κοινωνικό Στέκι-Στέκι Μεταναστών Χανίων Απόψε στις 7 το απόγευμα συντονιζόμαστε στο https://kpaxradio.live/
Το δελτίο μπορείτε να το ακούσετε στον παρακάτω σύνδεσμο:
HUMBA με θαυμαστικό. 15,588 likes · 200 talking about this. Τριμηνιαίο Περιοδικό
{έντυπο}
για το κοινωνικό πολιτικό νόημα των σπορ, την εμπειρία του γηπέδου & την οπαδική κουλτούρα
Δευτέρα και αντιπληροφόρηση στο Κοινωνικό Ραδιόφωνο Χανίων. Θα ακούσουμε: -Kείμενο εργαζομένων στην κοινοτική ψυχική υγεία για την ασυλοποίηση στα Χανιά – Αναφορά στο Pride της Σόφιας και στις καταγγελίες για την συστημική βία -Επιστολή αναπληρώτριας εκπαιδευτικού στα Χανιά για την βίαιη έξωση της -Ενότητα για την Παλαιστίνη(κάλεσμα στο δημαρχείο Ηρακλείου, στολίσκος ελευθερίας και ιστιοπλοϊκό Madeleine, March to Gaza και δίωξη πολιτών μετά από μήνυση ισραηλινών τουριστών για συνθήματα υπέρ της Παλαιστίνης) – Δήλωση Γιάννη Μάγγου -Δίκη και καταδίκη δημοσιογράφου και εκδότη για συκοφαντική δυσφήμιση στο Νίκο Ρωμανό -Δελτίο Τύπου και πρόγραμμα 2ου Φεστιβάλ Ανεξάρτητου Παλαιστινιακού Κινηματογράφου (PIFF) στα Χανιά. Συντονιζόμαστε στις 19:00 στο https://kpaxradio.live/
Εκτάκτως σήμερα Τρίτη 10/6, αντί για Δευτέρα, το δελτίο αντιπληροφόρησης από το Κοινωνικό Ραδιόφωνο Χανίων. Θα ακούσουμε: -‘Φασίστες το Μάλεμε δεν γέμισε ακόμα’: αντιφασιστική δράση στα Χανιά και κείμενο αναφορικά με αυτή. – Σχολιασμός της Β.Τσιριγώτη για την αναχαίτιση του Madleen και των μορφών αντίστασης – Τι είναι το March to Gaza και γιατί έχει σημασία να συμμετέχει ο αναρχικός/αντιεξουσιαστικός χώρος από το alerta.gr – Μια αναδρομή σχετικά με τα πλοία που προσπάθησαν ή/και κατάφεραν να σπάσουν το ναυτικό αποκλεισμό της Γάζας από το Κοινωνικό Ραδιόφωνο Χανίων. Απόψε στις 19.00 συντονιζόμαστε στο https://kpaxradio.live/
Μπορείτε να ακούσετε το δελτίο σε αυτό τον σύνδεσμο:
Το Κοινωνικό Ραδιόφωνο Χανίων θα βρίσκεται το τριήμερο 13-15/6/2025 στο Πνευματικό Κέντρο Χανίων για να αναμεταδίδει ζωντανά από το 2 Φεστιβάλ Ανεξάρτητου Παλαιστινιακού Κινηματογράφου που λαμβάνει χώρα ταυτόχρονα σε Χανιά, Άγιο Νικόλαο και Λεμεσό.
Συντονιστείτε από τις 19.00 για μουσική, ανοιχτά μικρόφωνα και ζωντανή αναμετάδοση των ομιλιών στο kpaxradio.live/
Παρακάτω το Δελτίο Τύπου:
Αυτή την Παρασκευή, Σάββατο & Κυριακή! 2 Φεστιβάλ Ανεξάρτητου Παλαιστινιακού Κινηματογράφου (και) στο Πνευματικό Κέντρο Χανίων
Το 2 Φεστιβάλ Ανεξάρτητου Παλαιστινιακού Κινηματογράφου (PIFF Crete Lemesos) έρχεται και στα Χανιά, στο Πνευματικό Κέντρο, αυτή την Παρασκευή, Σάββατο και Κυριακή (13,14 & 15 Ιούνη) με προβολές από τις 8 μ.μ., συζητήσεις, έκθεση φωτογραφίας και άλλα.
Σας καλούμε να στηρίξετε με την παρουσία σας
Για να μην σταματάμε να μιλάμε και να αγωνιζόμαστε για την Παλαιστίνη.
ΔΕΛΤΙΟ ΤΥΠΟΥ (για Χανιά)
2ο Φεστιβάλ Ανεξάρτητου Παλαιστινιακού Κινηματογράφου – PIFF CRETE LEMESOS 13, 14 και 15 Ιούνη 2025 (και) στα Χανιά, στο Πνευματικό Κέντρο Χανίων
«Θα παραμείνουμε όσο υπάρχουν τα θυμάρια και τα λιόδεντρα», Μαχμούντ Νταρουίς
Με αυτά τα λόγια σαν οδηγό, το 2o Φεστιβάλ Ανεξάρτητου Παλαιστινιακού Κινηματογράφου (PIFF) θα λάβει χώρα στις 13-15 Ιουνίου 2025, στη Λεμεσό της Κύπρου και στην Κρήτη, στον Άγιο Νικόλαο και τα Χανιά. Η Λεμεσός μαζί με την ομάδα του “Αντιρατσιστικού Φεστιβάλ Αγίου Νικολάου” και από τα Χανιά το “Κοινωνικό Στέκι – Στέκι Μεταναστών” μαζί με την “Πρωτοβουλία Αλληλεγγύης στην Αντιστεκόμενη Παλαιστίνη” συνεργάζονται από κοινού για να ζωντανέψουν αυτό το Φεστιβάλ, το οποίο θα πραγματοποιηθεί τις ίδιες ημερομηνίες και σε ταυτόχρονο χρόνο, στον Κινηματογράφο Χριστίνα στον Άγιο Νικόλαο, στο Πνευματικό Κέντρο Χανίων αλλά και στην έδρα του, στη Λεμεσό της Κύπρου.
Φέτος, κατά το τριήμερο του Φεστιβάλ θα προβληθούν τέσσερεις ταινίες, οι σκηνοθέτες/τριες των οποίων είναι Παλαιστίνιοι/ες που προέρχονται από τη γη της Παλαιστίνης και από τη διασπορά. Το πρόγραμμα του Φεστιβάλ φωτίζει αφηγήσεις από τη Γάζα, τη Δυτική Όχθη και τα κατεχόμενα από το 1948 εδάφη, εξερευνά την πραγματικότητα, τους αγώνες και την αντίσταση των Παλαιστινίων σε αυτές τις περιοχές.
Όσον αφορά τα Χανιά (Πνευματικό Κέντρο Χανίων), το πρόγραμμα έχει ως εξής:
Παρασκευή 13 Ιούνη • 7.30 μ.μ. Καλωσόρισμα • 8.00 μ.μ. “A State of Passion” (2024) της Carol Mansour και Muna Khalidi (92 λεπτά, 18+) • Ακολουθεί συζήτηση με θέμα ““Σπάζοντας τον αποκλεισμό στη Λωρίδα της Γάζας, 2008-2025. Διεθνιστική αλληλεγγύη και αντιστάσεις”, με τον συγγραφέα, δημοσιογράφο και μεταφραστή Nasim Alatras
Σάββατο 14 Ιούνη • 7.30 μ.μ. Καλωσόρισμα • 8.00 μ.μ. “Janin, Jenin” (2024) του Muhammad Bakri (60 λεπτά, 18+) • 9.30 μ.μ. “Lyd” (2023) των Rami Younis και Sarah Ema Friedland (78 λεπτά, 18+)
Κυριακή 15 Ιούνη • 7.30 μ.μ. Καλωσόρισμα • 8.00 μ.μ. “Bye Bye Tiberias” (2023) της Lina Soualem (82 λεπτά, υπό γονικό έλεγχο) • Ακολουθεί συζήτηση με θέμα “Γυναίκες στην Παλαιστίνη”, με το ενεργό μέλος της Παλαιστινιακής Παροικίας Ελλάδος, Mirei El Sayed
Κατά τη διάρκεια του Φεστιβάλ, στον χώρο του Πνευματικού Κέντρου Χανίων, θα φιλοξενείται η έκθεση φωτογραφίας με τίτλο “Is anyone alive? – The language of Communication in Gaza”, Επιμέλεια Mirei El Sayed
*Το Φεστιβάλ παραμένει μια μη κερδοσκοπική πρωτοβουλία σε εθελοντική βάση – θεμελιωμένη στην πίστη ότι η τέχνη θα πρέπει να είναι προσβάσιμη σε όλους/ες και να πηγάζει από τους ίδιους τους ανθρώπους που εκπροσωπεί. Οι προβολές είναι χωρίς αντίτιμο και ανοικτές σε όλους/ες.
Στον παρακάτω σύνδεσμο μπορείτε να ακούσετε τη συζήτηση με το δημοσιογράφο – μεταφραστή Nasim Alatras στο πλαίσιο της 1ης ημέρας του φεστιβάλ, με θέμα ‘Σπάζοντας τον αποκλεισμό στη Λωρίδα της Γάζας, 2008-2025’ που διεξήχθη στις 13 Ιουνίου 2025 στο Πνευματικό Κέντρο Χανίων :
Εβδομαδιαίο δελτίο από το ΚΡαΧ και σήμερα Τρίτη 17/6. Θα ακούσουμε: – ‘Βιομηχανία κατασκευής ενόχων 2025’ μια επιστολή από το Νίκο Ρωμανό. -Δελτίο Τύπου του Σωματείου Εργαζομένων στα Κέντρα Πρόληψης για την ιδιωτικοποίηση της πρόληψης-θεραπείας και επανένταξης από τον ‘υπουργό’ Υγείας. -Ενημέρωση από το καραβάνι Sumud, το οποίο ξεκίνησε από την Τυνησία για την άρση του αποκλεισμού της Γάζας. – Η επίσκεψη του μουσικού σχήματος @yaraman_band στις φυλακές της Αγυιάς. Απόψε στις 7 το απόγευμα αντιπληροφόρηση από το ΚΡαΧ , στο https://kpaxradio.live/
Δευτέρα με αντιπληροφόρηση στο Κοινωνικό Ραδιόφωνο Χανίων. Θα ακούσουμε: – Η εθνική γυναικών δεν χρειάζεται φουστανέλες. Από το HUMBA με θαυμαστικό μια συνολική ματιά στο μπάσκετ γυναικών ενόψει του ευρωπαϊκού τουρνουά. – Η θεώρηση μιας Ιρανής αναρχικής για τους βομβαρδισμούς στην Τεχεράνη. – Κείμενο από την Πρωτοβουλία Κρήτης ενάντια στις εξορύξεις υδρογονανθράκων – Κείμενο από τη σελίδα ΄στο πλευρό των Ρομά’ για την υπόθεση της δολοφονίας του Κώστα Φραγκούλη. – 2 επιστολές καταγγελίας, με αφορμή και αιτία το greenwashing του πολιτικού προσωπικού στο φετινό Φεστιβάλ Βιβλίου στα Χανιά. Απόψε στις 7 συντονιζόμαστε στο https://kpaxradio.live/
HUMBA με θαυμαστικό. 15,588 likes · 200 talking about this. Τριμηνιαίο Περιοδικό
{έντυπο}
για το κοινωνικό πολιτικό νόημα των σπορ, την εμπειρία του γηπέδου & την οπαδική κουλτούρα
μια κουβέντα για την νευροποικιλότητα με την Σοφία συντονίστρια της Ημέρας Υπερηφάνειας Νευροδιαφορετικότητας για την Ελλάδα
τι σημαίνει να είσαι άτομο με νευροαποκλίσεις; πότε ξεκίνησε το κίνημα για την νευροποικιλότητα και πώς άλλαξε τη θεώρηση του ατόμου; ποιο είναι το αντικαπιταλιστικό του υπόβαθρο; πώς συνρυθμιζόμαστε;
αυτά και άλλα πολλά με βασικό motto το ‘what’s strong with you?’ στη θέση του ‘what’s wrong with you?’ μεταδόθηκαν στις 25/6 και ξανά το Σάββατο και την Κυριακή στις 20.00 στο Κοινωνικό Ραδιόφωνο Χανίων
Δελτίο αντιπληροφόρησης σήμερα το απόγευμα. Θα ακούσουμε: – Kάλεσμα για το εφετείο του παιδοβιαστή Παπαδογιάννη για την 1/7, από τις ‘Αγκίδες’ Συλλογικότητα ενάντια στις έμφυλες καταπιέσεις & σε κάθε μορφή εξουσίας. – Το τελευταίο άρθρο της αγωνίστριας αρχιτεκτόνισσας Βάνας Σφακιανάκη, που μας άφησε πρόσφατα. – Κείμενο από την πρωτοβουλία αναρχικών αγίων αναργύρων-καματερού για το θανατηφόρο εργατικό ατύχημα 65χρονου δημοτικού υπάλληλου. – Νίκη των ναυτεργατών στα λιμάνια Πάτρας και Ηγουμενίτσας στη γραμμή της Αδριατικής. -Γιατροί Χωρίς Σύνορα: Το θανατηφόρο σύστημα διανομής προμηθειών στη Γάζα
Εκτάκτως σήμερα Τρίτη 8/7 το δελτίο αντιπληροφόρησης από το ΚΡαΧ. Θα ακούσουμε: -Δήλωση συνηγόρων οικογένειας Παύλου Φύσσα για την αποφυλάκιση των φασιστών της Χ.Αυγής. -Γιγάντωση των φοιτητικών διαδηλώσεων στη Σερβία. -Συνολική ενημέρωση από τη δίκη του αναρχικού Ανδρέα Φλώρου. – Ρεπορτάζ για την εκδήλωση της τρανς κοινότητας στο Αντιρατσιστικό της Αθήνας (efsyn) και σχολιασμός από την Maria Louka -Μεταναστευτικές ροές στην Κρήτη και κείμενο από το Κοινωνικό Στέκι-Στέκι Μεταναστών Χανίων. -Νίκη στην απεργία πείνας του έγκλειστου συντρόφου Maja T, ανακοίνωση από τις έγκλειστες συντρόφισσες Μαριάννα Μανουρά και Δήμητρα Ζ. – Διήμερο 11 & 12 Ιουλίου ‘ Οι Κοινωνικοί Αγώνες στο προσκήνιο’ από την ανοιχτή συνέλευση για την κρατική δολοφονία του Κώστα Μανιουδάκη.
Μπορείτε να ακούσετε το δελτίο στον παρακάτω σύνδεσμο:
Κοινωνικό Στέκι-Στέκι Μεταναστών Χανίων, Chaniá. 5,254 likes · 216 talking about this. Τι είναι το Κοινωνικό Στέκι - Στέκι Μεταναστών;
Το Στέκι είναι ένας πολιτικός και κοινωνικός χώρος. Το Στέκι...
Δελτίο αντιπληροφόρησης #21 (30-06-2025)kpaxradio.live/wp-content/uplo… 500 500KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png1 Ιουλίου 20251 Ιουλίου 2025
30 Ιουνίου 2025
2025-06-24 what’s strong with you 1
2025-06-24 what’s strong with you 1kpaxradio.live/wp-content/uplo… 0 0KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png30 Ιουνίου 202530 Ιουνίου 2025
Το ΚΡαΧ στο PIFF 2025 #chaniakpaxradio.live/wp-content/uplo… 1587 2245KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png12 Ιουνίου 20255 Ιουλίου 2025
Στην σημερινή εκπομπή είχαμε καλεσμένη την Φωτεινή από @KyMa_OEF είπαμε για τις ανάγκες που έχουν (θα τις ακούσετε) όπως και το τι τραβάνε με διάφορους, επίσης καλοσορίζουμε την Ερμιόνη από το @EmptyTheCages_ και ελπίζουμε να την ξαναέχουμε στην παρέα μας.
8 Ιουλίου 2025
2025_Αφιέρωμα Ε.Φ_#4 Ωδή στη Σύρο, _Παναγιώτης Κούστας
Με χαρά σας καλωσορίζω στο τέταρτο επεισόδιο του αφιερώματος Ε (πιστημονική) Φ(αντασία) με το διήγημα του Παναγιώτη Κούστα,”Ωδή στη Σύρο”, με εικονογράφηση Παντελή Παντελόπουλου , …
μέχρι το τέλος της νύχτας #107kpaxradio.live/wp-content/uplo… 500 500KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png2 Ιουλίου 20252 Ιουλίου 2025
Μεσούντος του καλοκαιριού πχιά και η εκπομπή συνεχίζει μέχρι να ανεβάσουμε θερμοκρασία και να αποσυρθούμε ήσυχα. Καλοκαιρινές κ ανοιξιάτικες νέες κυκλοφορίες ( The Bats, Animal…
Μηχανή #193 ένα τριαντάφυλλο ορθώνει ανάστημαkpaxradio.live/wp-content/uplo… 580 580KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png2 Ιουλίου 20252 Ιουλίου 2025
ένα τριαντάφυλλο και μια φέτα καρπούζι για αυτό το πρώτο βράδυ του Ιούλη – Μην εκπλαγείτε ποτέ αν δείτε ένα τριαντάφυλλο να ορθώνει το ανάστημά…
Μία ακόμη εκπομπή που συζητήσαμε διάφορα της επικαιρότητας και ανταλάξε τις απόψεις μας. Παράλληλα βγήκαμε και στο YouTube (με προβλήματα δε). Θα βγάινουμε κάθε Πέμπτη και στο YouTube αλλλά να ξέρετε ότι η εκπομπή δεν θα μπορεί να ανέβει λόγω δικαιωμάτων μουσικής.
μέχρι το τέλος της νύχτας #106kpaxradio.live/wp-content/uplo… 500 500KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png25 Ιουνίου 202525 Ιουνίου 2025
Χαθήκαμε για ένα διάστημα, αλλά μόνο για να ξαναβρεθούμε. ‘Μέχρι το Τέλος της Νύχτας’ σήμερα ξανά στα πυρηνικά σας καταφύγια, από τη διαδικτυακή συχνότητα του…
22 Ιουνίου 2025
FOVELA radio edition 21/06/2025
FOVELA radio edition 21/06/2025kpaxradio.live/wp-content/uplo… 828 466KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png22 Ιουνίου 202523 Ιουνίου 2025
H Φοβέλα radio edition ξανά ζωντανά μετά απο μερικές εβδομάδες με τον Σταύρο & Τάτα απο την Αθήνα , τον Κώστα απο τις ΗΠΑ και…
Μηχανή #192 νευροποικιλότηταkpaxradio.live/wp-content/uplo… 580 580KPaX RadioKPaX Radio//kpaxradio.live/wp-content/uploads/2020/11/logo-kpax2.png18 Ιουνίου 202523 Ιουνίου 2025
μηχανή #192 με αφορμή την Ημέρα Υπερηφάνειας της Νευροδιαφορετικότητας με ποίηση που γράφεται από αυτιστικά άτομα ή που εξερευνά την αυτιστική εμπειρία https://neurodiversityprideday.com/el/eλλάδα/ στο Κοινωνικό…
Ένας παγκόσμιος εορτασμός των νευροδιαφορικών μυαλών. Ελάτε μαζί μας για την ανάδειξη της νευροδιαφορετικότητας μέσω της υπερηφάνειας, της προβολής και της χαράς.
So, I was originally just going with Mint 22.1, but I’m getting a 9070xt and see mint is only on kernel 6.8 which doesn’t particularly support it?
Is using it still okay? Should I go with Bazzite instead? Or something else. I’m fine with a little amount of work to get shit working nice and all, I am fine with figuring out how to use the terminal if needed and all, just want something stable to play games and other shit on. Mint sounded good, but not if it won’t support my GPU.
I always go arch for stuff that needs the new shit, and debian for stuff that should run stable. Those nix bazzite tubleweed thingies are nice, but too niche, if you have a problem the small communities are less probable to have it as well and good luck finding solutions
@Eggymatrix @TowardsTheFuture The problem with Arch is that there is no support by kernel.org for an arch package, so if you want to customize your kernel it's more of a pain in the ass, where for either debian or redhat derivatives you can simply make -j($tasks) debbin-pkg or rpmbin-pkg. For most other things I would agree.
Arch may be a little more than I would prefer because… just going to look at the site would take learning just what the fuck is going on. I don’t need constant crazy new stuff, I just want the GPU to work.
@TowardsTheFuture @Eggymatrix Arch is pretty build your own, but that said you can customize it to the n-th degree and incorporating source from various repos is easiest when you have modern libs and don't have to build a dozen libs with each project (which is the case with Ubuntu). I just wish the kernel.org folks would create rules to create a kernel package to make mainstream kernels easier. Of all my machines, it is the second last to get upgraded (an ancient centos6 box last).
Is there a particular reason you need an nvidia gpu? Like plans to do local LLMs or other projects that really require a nvidia gpu?
Because I am just so pleased with AMD for gpus in Linux. So simple.
Not knocking your choice, just trying to understand it. Everyone has valid reasons for why they choose their setups.
Edit: nevermind I am so confused by the new naming schemes I thought this was an nvidia, others have informed me its an AMD. Nevermind me I am a dingus.
9070xt is an AMD… it’s just new… and I’ve seen a lot of posts saying you want kernel 6.13 or higher for it, and mint 22 is using 6.8. (And that you want mesa 25 but I don’t think getting that’s an issue?)
(I realize AMD changing their naming yet again makes that confusing.)
Yeah I mean, no experience with it and it says it’ll all probably work but I was not sure about it. I had seen mint 22 was made to not be stuck on 5.15 so it might be possible but it seems like they focus on LTS which would go to 6.12 now and not 6.13+. Is it worth doing all that to still use mint or would I be better off just going with like fedora 42 or bazzite or something else.
I've put later kernels on Mint a half dozen times withno dramas, but whether you should depends on what your use case, preferences and skill are.
I personally wouldn't do the arse-ache that is an immutable system, but plenty here love their Bazzite it seems. Different strokes for different folks. Nothing wrong with that.
If you love Mint except for the kernel version then it's an easy fix. If you don't have deep feelings then either try & be ready to ditch, or pick an alternative.
Just for the record there is no "doing all that" about it. It's a simple couple of clicks. It couldnt be easier. I'm not sure where you got the idea it was difficult.
I guess the “doing all that” mostly means taking something supposedly very stable like mint and then changing it seems to kinda defeat the purpose of mint lol. Idk, there so much “mint and Debian are stable” but like… what’s the even mean? Is fedora 42 or bazzite going to be crashing regularly? Cuz… I doubt it? lol like idk, there’s just a lot of options. Seems easier to just go with fedora 42 or bazzite or whatever, but now idk what bazzite being immutable even means for what I can’t change and why that’s a big deal so idk.
I get the impression you've been enticed/subjected to some confusing technical jargon without noticing. Please allow me to shed some light.
Idk, there so much “mint and Debian are stable” but like… what’s the even mean?
Stable can mean a bunch of different stuff that may or may not be closely related. In the case of Debian, it's the name of its default release; the one in which packages are frozen for two years except for security patches. (Note that this naming scheme is not unique to Debian.) As such, a Debian installation will be unchanging for these two years, earning its stable designation (which, to be clear, just meaning unchanging in this context). Finally, this unchanging environment should provide a ton of stability (i.e. stuff just works), which is also referred to as stable. These three distinct meanings of stable are probably the ones you'll come across the most.
Is fedora 42 or bazzite going to be crashing regularly? Cuz… I doubt it?
The bold part is a clear demonstration that you understood stable to mean strictly robust; i.e. the third meaning discussed above. And to be clear, Fedora does a decent job at providing a reliable experience. (Bazzite even more so.) But not all three meanings of stable apply to it: - For Fedora (and thus Bazzite by extension), the only stable repository is the one used to create its ISOs (i.e. the images used for installation). Beyond this, some packages are frozen within a release/version; e.g. you'll never get a major release update for GNOME unless you do a major release update for Fedora. But..., that's basically it; (almost) all other packages receive regular updates. As such, Fedora is often referred to as a semi-rolling release distro instead (as opposed to Debian being referred to as a stable release distro). So, to be clear, Fedora and Bazzite are NOT stable in this context. - As (most of) its packages receive regular updates, it isn't unchanging either. And thus, NOT stable in this context as well. - However, in terms of offering a robust/reliable experience, Fedora is pretty good. Bazzite is even better due to its atomicity^[That is, updates either happen successfully or not at all. So a random power outage (or otherwise) is not able to break the system's integrity.] and the superior distro-management allowed by the bootc model.
So, to answer your question, Fedora and Bazzite will not crash regularly. And, while Fedora might fall a little short of providing as robust of an experience as you might find on Debian and Linux Mint (assuming you won't FrankenDebian your installs), Bazzite may actually rival (and perhaps even eclipse/surpass) Debian and Linux Mint in this respect.
Seems easier to just go with fedora 42 or bazzite or whatever
For your purposes, I agree that going for the Bazzite-route seems to be the easiest.
but now idk what bazzite being immutable even means for what I can’t change and why that’s a big deal so idk.
This is a nuanced discussion that probably deserves more attention, but I'll keep it short for the sake of brevity. In Bazzite's case, strictly-speaking, immutability refers to how most of /usr's content isn't supposed to be changed deliberately by you. This is enforced by the system (in part) by making those files read-only.
In practice, though, there's very little you actually can't do with the system: - AFAIK, you're forced to use GRUB; which AFAIK is the most used bootloader anyways. Here's a thread discussing support for systemd-boot. - No support for UKI at the moment. But progress on this has been accelerated (relatively) recently; . - The situation around dkms/akmods still ain't great and leaves a lot to be desired; you're basically limited to the ones found here. Thankfully, this is something else that's actively being worked on. - While installing from Fedora's repository through bootc/rpm-ostree is possible, it's actually discouraged in Bazzite's case. Thankfully, there's a plethora of different means to the same end. Furthermore, sysext have come a long way and might become our go-to eventually.
From what I can tell, this is basically present (since the loader syntax is identical), except systemd-boot needs the loaders and kernels to be on the ESP (/boot/efi), not where OSTree places them ...
Pretty good so far, few things took a while to figure out (keeping specific apps loading on start in the right spot/size, not having it force me to enter a password any time I open my browser, getting protontricks to work, etc.) and sadly still one thing I probably won’t ever be able to fix is getting a program (combat mode for GW2) to actually work as it’s… like 13 years old and just lets me press a button to make my mouse left/right click into keys while the game is up. They have integrated the other functionality of it at least so it’s not THAT bad. Might be able to get my mouse to manually do that if I check out the drivers for it I think someone made.
Glad to hear that it has been a pleasant experience overall!
few things took a while to figure out ...
The "force me to enter a password any time I open my browser"-thing seems like unintended behavior. Pretty strange. Glad to hear that it has been resolved, though.
sadly still one thing I probably won’t ever be able to fix is getting a program (combat mode for GW2) to actually work as it’s… like 13 years old and just lets me press a button to make my mouse left/right click into keys while the game is up. They have integrated the other functionality of it at least so it’s not THAT bad. Might be able to get my mouse to manually do that if I check out the drivers for it I think someone made.
Perhaps you've already undertaken what I'm about to say, so please feel free to ignore this if that's the case: Have you reached out to their Discord server in hopes of resolving the issue? While their documentation is pretty great, it's possible that it ain't sufficient. Whenever that happens, the Discord community can (and probably will (at least in my experience)) step up and provide excellent guidance when prompted.
Idk about the browser thing it was because the kde wallet or something? It stores passwords and the browser has a login so it would force me to do that every time. Same with email and such, very annoying. I think I have it all working fine now.
As far as what I could not get working, I was able to just set up mouse profiles to do mostly the same. Good enough of a workaround. It’s an old program separate from the game that seems to look at the active window to contain “Guild Wars 2” and if it is, hitting a button will change mouse clicks to whatever buttons. (And hitting certain buttons or not being in GW2 will disable that) so like… idk how Linux works but I feel that ain’t gonna happen without changing it, and the dev has fucked off 13 years ago (and I might be the literal only person still using it.)
Idk about the browser thing it was because the kde wallet or something? It stores passwords and the browser has a login so it would force me to do that every time. Same with email and such, very annoying. I think I have it all working fine now.
Ah okay, thanks for the clarification! I have heard of that interaction elsewhere. Unsure if it's KDE Plasma misbehaving or otherwise. Regardless, I'm glad to hear that you were able to resolve the issue. I did find this discussion (which you may have found yourself as well). In their case, they (somehow) didn't properly create an account, which opens multiple can of worms you'd much rather not deal with. Thankfully, the fact that you were able to deal with the problem suggests that you should be fine 😉.
I tried to disable it, but the password I enter in doesn’t work (I know it is my admin password). A SSH pop up happens as well, enter password, goes away, then reappears. KDE Wallet pops up, click next, no key.
You want a semi or rolling release distro. Fedora is semi-rolling, would be the most user-friendly I think. Anything Arch-based but more user-friendly, like CachyOS, would be good as well. Tim leweed is rarely recommended unless you need like bleeding edge, which it doesn't sound like you really want.
While (I think) you can install HWE (hardware enablement) kernels on Mint, you would also have to upgrade Mesa, which is not as easy on Mint.
Personally in this case, for a truly stable distro, I’d install Debian Stable and install a backports kernel and backports Mesa, which are both currently versions that should support RDNA4 GPUs like OPs just fine. This involves two simple steps after installing: 1. Enable the Debian Backports Repo (see backports.debian.org/Instructi…). It’s like, one file. 2. Install the packages with something like sudo apt install -t bookworm-backports linux-image-amd64 mesa-va-drivers and reboot.
Before you take these steps, you probably won’t have hardware acceleration, but will still get video output so you can perform the steps and reboot.
This is definitely a weird suggestion, and other people’s suggestions might be less work out of the box. I just like Debian, and stability+backports+testing is part of what makes it possible for it to be my everything distro.
I just grabbed a 9060XT open box deal without thinking about driver support, I'm using Mint 22.1 as well. YMMV but I can't get any kernel besides 6.8 to boot, not even the Mint supported 6.11 HWE. Video output works but the drivers don't load and even scrolling down a webpage gives me screen tearing. I did get a more recent Mesa version with the kisak ppa but it hasn't helped. Can't even go above 60Hz refresh rate.
I tried Ubuntu 25.04 on a LiveUSB and it's basically plug and play and might have even automatically switched to the 144Hz monitor refresh rate.
I don't have a whole lot of time for getting a new distro set up right now. I will wait until Mint 22.2 (coming soon? with a newer kernel hopefully) and see how that goes.
An assistant professor who was accused of harassing pro-Palestinian students as well as staff at Columbia University has left the institution following a "mutual agreement" he will not return to teaching at the Ivy League school, according to a unive…
More than 20 countries are convening in Bogota next week to declare “concrete measures against Israel’s violations of international law”, diplomats told Middle East Eye.
By Katherine Hamilton
U.S. Cellular and Telephone and Data Systems received approval from the Federal Communications Commission for its deal to sell a portion of its operations to T-Mobile.
In...
LOL, I actually managed to do this with a broken spacebar. Half the bar was missing, so I took a completely different model scrap keyboard that was water damaged, carefully cut it in half, secured that with the original half with a couple paper clips and epoxy, and somehow even managed to make the stabilizer bar underneath line up and work.
Hey, if it looks stupid but works, it's not stupid. 👍
I'm very new on Linux and i'm trying to get some help.
I tried Linux mint and other debian distros, and since i dont have the sufficient skill to manage linux, this time i'm choosing Kubuntu because of the KDE environment , which i like a lot.
I know more about linux mint and kinda know how to work with him, but kubuntu never tried and i will try this time... but i have some questions if someone can help me.
Kubuntu is ok for a new person on linux?
I want to install apps/programms via flatpak, since this looks more easily for a newbie as me and because of the sandbox, which seems is good (?).
On Kubuntu, is easily to install flatpak via diskover? I see i need to add the flathub repo, but my question is if someone have getting any error or problem with this, or if this is easy to do it.
Other question I have, is about some apps i want to install if i dont find it or just find it on github or something similar. I find an app that really like but this app dont appear in any store, and this app is only available on github via flatpak and .deb . In this case, since the app is not available on flathub or diskover, or via command lines (like sudo apt install firefox - if you understand me) , how can i check this is not a virus or can do bad things on my linux? I use total virus for this, and the checks gives zero flags, but would like to know if for example, i install this programm via flatpak, can break my system.
Other question is about flatpaks from flathub. I know flatpak usually dont follow the theme of my DE. Which is the best way these flatpaks have the same theme as my DE? Is using the flatseal? Any tip about this?
And, btw, if you can give me some tips and advice as linux/kubuntu newbie, it would be amazing for my journey. Cheers all!
I want to install apps/programms via flatpak, since this looks more easily for a newbie as me and because of the sandbox, which seems is good (?).
you can do that on any distro. Should be easy to install.
Other question I have, is about some apps i want to install if i dont find it or just find it on github or something similar. I find an app that really like but this app dont appear in any store, and this app is only available on github via flatpak and .deb . In this case, since the app is not available on flathub or diskover, or via command lines
Thats why after 3years of debian/kubuntu I switched to arch. But that doesn't mean anything. Just do kubuntu for now and if you have troube installing something ask the community and they will help you get it installed.
And, btw, if you can give me some tips and advice as linux/kubuntu newbie, it would be amazing for my journey.
Agreed.Also, Windows and OSX, unless you want to have to call your nephew who's Good With Computers™ every couple of weeks. If you're just using a browser for everything and never messing around like a good majority of people, Linux is just as good as either of those. Linux has gotten to the point where it's Grandma proof if you stick to a distribution that prioritizes stability. If you choose a distro that prioritizes bleeding edge software versions, you may come across more bugs and breaking changes.Then you'll need the troubleshooting skills mentioned here. Most of us are here to learn and mess around; the troubleshooting skills grow from that mindset.
The FTC's 'click to cancel' rule would have wiped out a practice that allowed some businesses to scam their customers. That's why businesses got it killed
Miret and Krishnan discuss the promise of large language models (LLMs) to revolutionize materials discovery via automated processing of complex, interconnected, multimodal materials data.
Tony Hawk's Pro Skater 3 + 4 is now available on Nintendo Switch and Nintendo Switch 2: https://ninten.do/6059S7FDD The games that raised a generation of sk...
Over on YouTube, [Technology Connections] has a new video: Induction lamps: fluorescent lighting’s final form. This video is about a wireless fluorescent light which uses induction to transfe…
Who doesn’t want an X-ray machine? But you need a special tube and super high voltage, right? [Project 326] says no, and produces a USB-powered device that uses a tube you can pick up two for…
Yea, it might be a wait. I picked up a launch unit just for the purpose of future exploits. I'm just leaving it sealed on a shelf, worst case, I can probably get back what I paid for it in a few years since sealed Nintendo stuff holds their value decently enough.
Like most other people seem to feel about, there's just not enough of a pull for me to want to play it LMAO
Especially since I already haven't played my fully modded Switch 1 in a few months as is xD
From what I've been seeing in the Switch Hacking groups, you might be waiting a very long time. Nintendo has the kernel locked down very tight. I'm hoping that a vulnerability becomes exploitable but those that know more than I are less hopeful
Yea, just sold to a prominent retro computer YouTuber (though I'm blanking on the name atm) so I think it's in good hands now (though too soon for this product, it was literally like a week or 2 ago they closed the deal)
Decided to do this as a streaming stress test for my PeerTube server (and to learn more about live streaming setups and how OBS works), will probably lag behind updates in canvas size and such, as nothing like that is automated. Enjoy!
You actually make a great point. Really, for me it was mostly a quick idea because I had been musing about PeerTube's streaming capabilities in a different comment thread, and about how it leverages the P2P mechanism, so it was fresh on my mind that I wanted to stress-test my own server somehow (and I wanted to learn how to set-up OBS with chat and stuff for PeerTube). Then, while "working" on the canvas, I had the sudden: "Hey, I'd love to set my pixels while zoomed in, while also watching the whole field zoomed out"-thought ... but of course that would just as easily be possible by just having two browser windows open 🤷
If nothing else, I got some promising data showing my server can handle several people tuning in to live streams at the same time - and I am also using this to test how my server handles someone wanting to encode a 24h+ VOD from a stream, so that will be there, too - probably for another time-lapse in addition to the official ones.
That's cool. I'm sorry if it came across like I was criticizing your live stream, that wasn't my intention. I just wanted to add the link to the actual event since it was missing from your post.
And now that you mention it, it is cool to have the whole event (or at least most of it) available as a VOD, if someone wants to put together more timelapses for example.
Help us expand our Muslim media project here: https://www.thinkingmuslim.com/membershipDonate to our charity partner Baitulmaal here: http://btml.us/thinking...
https://hypersclub.com/ - Dave Chappelle wants it to be known that he's not a fan of DJ Khaled's silence while his fellow Palestinian's struggle in Gaza to d...
I live in Chicago and this city feels so full of energy in the summer. There are constant festivals, events, people are hosting cookouts, everyone's outside. It feels like a constant party. You pay for it in the winter though.
I lived most of my life in South Carolina. Last year, I made the mistake of visiting SC in the summer. I had to say no to so many plans in Chicago and leave beautiful weather to visit the hottest, muggiest, no-wind-est place on earth. In Columbia, SC the pride festival is held in October because if it was held in June, people would just die. I told my friends and family that they visit me during the summer and I'll be around for the holidays.
Hi, as many others I am looking to switch to linux before microsoft kills win 10. I read a lot of advice online for distros, but my main needs are not really discussed. I need a distro that runs well for game dev specifically unreal engine 5.4-6.
I am currently aiming to try mint, as it has been recommended to be stable and i already dabbled a little bit with Ubuntu on my laptop.
I am not afraid of some tech journey, but even though arch seems the coolest, with Wayland, kde, hyperland customization, i am not confident enough to use it for work. I heard it can completely crash your system if your a noob.
So in essence i need something stable that is relatively easy to use and has great ue5 and gaming perf. Thanks in advance for all the help.
Mint is a great choice, it is very stable, and it really holds your hand via the Software Center.
However, stable also means old: it does not support the latest hardware.
If you have hardware that released after (rough estimate) April 2024, consider something based on Fedora, such as Bazzite, instead. It comes with modern drivers and should support modern hardware much better.
Bazzite was heavenly promoted for gaming, but there was no mention on using it for work. Does it work well for regular productivity, code, graphic design, 3d?
They're actually working on making a version specifically for game developers, but it isn't released yet. There is also a more generic version for developers. dev.bazzite.gg
Of course you can, why wouldn't you? It's Fedora Kinoite with added stuff for gaming. There is a special edition for devs in the making, in case you're interested in keeping an eye on that: universal-blue.discourse.group…
I heard it can completely crash your system if your a noob.
You can crash anything if you try. Been there, done that. Just go ahead and start using it. Just keep backups which you always do, regardless the O/S and situation. (pro tip: TEST RESTORING THE BACKUPS)
Maybe make an extra backup before you try something and you'll live. You could also use a separate partition to store your files so you can re-install without touching your data. Make that partition size 'recognizable' (t.ex. the biggest by far and label it) so you won't mess up the partition selection when you re-install. And NO don't ask me how I know!
Yes Mint is a good choice for your migration. It has been put together in a way that makes it intuitive for a windows refugee. The menu layout has the "start" (mint) button bottom left with your apps in there.
The system apps are named obvious things like "software manager" and it has default apps installed to get you going.
Being derived from Ubuntu it is the best supported platform for commercial apps/games but with Ubuntu's weird choices (snap etc) tidied up.
It's the most recommended linux distro for beginners for a reason. It's a solid reliable well thought out platform
In my experience Fedora with GNOME is really use friendly and intuitive to use, and I've never borked it when not using the terminal. It also has a lot of extensions you can install to customise the experience, and almost everything can be done via a GUI.
I've had smooth sailing both with Fedora GNOME and Fedora KDE. And it's another "common choice" with good enterprise support thanks to Red Hat, just like Ubuntu and all their baby distros.
I'm not sure about unreal engine compatibility, but I've been using Fedora Silverblue and it works good enough. Sometimes I've seen graphical bugs, but they are fixed quick enough for me to not care too much. Since I use the computer for work (and I don't have much time to fiddle with my system) I have found that an atomic distro is the one that requires less maintenance, so it allows me to just do my work without having to troubleshoot things breaking. I have switched a lot of linux distros because I was never satisfied with how things looked or worked (and because of bugs with nvidia and other things, I am a long time linux user and things have never worked as smooth as today, now that we have wayland and proton and a lot of nice things). At the end of the day, I believe that the best thing to do is tho choose one of the most popular distros (Ubuntu, Fedora, Debian, Arch) and make adjustments to fit your needs. Distro hopping is fun, but not so much when you're short on time and you have stuff to do. Hope this helps.
I doubt that would help, sadly. There is SO MUCH advice out there already, but people always think they are special and have a very rare and complicated use case.
I think Fedora using either Gnome or KDE would be a great place for you to start. Ubuntu or Mint aren’t terrible choices either.
On the topic of Arch, there’s a Distro I use called EndeavourOS. It’s billed as an Arch based distro that’s geared towards the terminal, but unlike Arch it comes all of the basic software you might need right out of the box, and offers a long list of desktop environments (KDE, Gnome, and XFCE being the best choices on the list)
I use Hyprland on it, but Hyprland isnt advisable until you have some solid experience with a different desktop. Because it is geared towards the terminal, it expects you to install and update your software from the terminal. Not a difficult task, but it might not be ideal when you’re just getting started.
I’ve been running it for a long time without issue. But how “stable” it is depends on how much you read the documentation and developer announcements, and how much you fiddle with things you don’t understand. That can be true in mint or Ubuntu as well, none of them prevent you from breaking things.
Recently endeavour changed the way they deal with some firmware related packages, this would cause an error when updating, causing a handful of packages to not be upgraded. A quick DuckDuckGo search of the error message took me straight to a forum post by the devs explaining that you have to uninstall one of the related packages, and run the update again. If you didn’t think to look you’d probably panic and think your system was broken. Just an example of how the operating system itself doesn’t hold your hand. It’s up to you whether that’s acceptable or not.
On the topic of stability, save your important files on a separate drive. It’s been said elsewhere in the thread but bears repeating. As long as your files are stored in a separate drive, if you run into issues you aren’t able to fix, you can just wipe and reinstall, it maybe takes 20 minutes depending on your hardware, and while you’re experimenting and learning, it wouldn’t be uncommon for you to break some things.
Operating systems are rarely unstable. Users are the most common source of instability.
Recently endeavour changed the way they deal with some firmware related packages
Actually, that was Arch and as Endeavour uses the Arch repositories + the AUR, and their own repository for their additions, they were naturally affected.
If you run endeavour, you are basically getting Arch with a familiar installer, a few useful helper scripts, and a friendly community. You are still expected to know your hardware and your install. You are still expected to keep up with the Arch news, and make any manual interventions required. If you do that, endeavour is remarkably reliable.
Thanks for the advice, I will go ahead with trying mint first. Then a fedora to compare performance and a separate partition/drive for messing up arch/endeavour. Just have to disable bitlocker... Because that's how my last mint experience ended up xD
If Mint works for you, just stick with it. No need to try a different distribution to compare. You'll know when you need it.
I would only go to Fedora if you need it. For example newer drivers (kernel, mesa). Don't go change the kernel and/or mesa on a distribution, probably better to switch at that point. Or if you need KDE or GNOME for some reason. Wayland is disabled in Mint by default, but can be enabled. It's been over a year IIRC since they added experimental Wayland support so it may be fine by now.
Differences between Linux distributions are exaggerated.
Mint is great. It may not work for you if you have super new hardware.
Fedora is great. It’s mint but with newer stuff.
Arch is great. Bleeding edge. But it’s not “set it and forget it”.
Linux is great. There’s a million other options. Any of them work if they work for you. Find someone bashing Ubuntu - they would HAPPILY choose Ubuntu over win11.
And you have to realize the “what version I’m on dependency hell” thing is a thing of the past for the most part. Flatpaks just about solve this problem. You’ve got containers and vms too. Switching to another distro ain’t hard either as a nuclear option.
Just install mint or fedora like everyone says. Your requirements aren’t special, and both options are great.
I read a lot of advice online for distros, but my main needs are not really discussed.
You're not special and Linux distros aren't that specialized. They differ in packaging, upgrade philosophy, etc. There is no Linux distro that can't do the things others do.
You dabbled with Ubuntu. Stick with it, you'll be fine. Unless you really want mint, then go for it you'll be fine.
The urge to distrohop can be a distraction, but an itch that needs to be scratched now and then. I tend to always end up where I started, but when I do I feel better about it.
I would go with something ubuntu based or fedora. If you want to learn then Bazziteos may not be for you since it's ridiculously easy to figure stuff out on there. Instead, you might enjoy learning a system where you type some commands in the terminal like fedora or linux mint
If you're new to Linux, you won't stay with the distro anyone recommends for more than a month. It's a truism.
I'm not you. You're not me.
That said. Ubuntu isn't the Ubuntu of old. The real selling point is the zfs, but you have all the other NIH stuff like snap etc. I'm not a zfs fan but I appreciate that it's got a huge fan base.
One thing to say is that you don't have to have a one and only. I have at least two distros I use daily for workstation stuff. I use Fedora for typing and Arch for backups, debugging, rescue, and other fiddling about stuff (because Fedora gets in the way sometimes). Every distro has the same set of commands.
Coming from Windows, OK with a bit of tech journey and into gaming here is my take in no order of preference.
1) TuxedoOS if you are inclined to Debian/Ubuntu side. Slow updates but it has latest KDE and very stable in my experience. 2) If you just want set and forget (minimal updates) Linux Mint (Ubuntus fall here too) Now, it is not very appealing aesthetics. 3) Fedora. Probably the best overall, but if you have beef against IBM/Red Hat, ditch it, its superiority is very marginal. Gamers like the spin Nobara, some performance increase but minimal. 4) Arch is not that unstable as portrayed, but one time in a critical time is bad enough, even if very rarely occurs. You assess your risk. The popular baby today is Arch's CachyOS due to catering to gamers. 5) OpenSUSE's Tumbleweed is maintained quite good and very close to Fedora in being perfect overall, but fewer people behind and less support. I would only go with it if you have a specific reason why (German, Yast tools, rolling release but stable,...)
At the end, like many people say, it is likely you will hop... until one day you find that distro hoping is pointless and that all are actually very close to each other and could easily coexist with any of them all. The difficult and uncompromising aspect usually is with the desktop environment like KDE Plasma, Gnome, Cinnamon...
arch seems the coolest, with Wayland, kde, hyperland customization
While I have no experience with Unreal Engine, so I can't give an informed recommendation, I just figured I'd point out that you can do this with every distro
I don't recommend Bazzite. I'm far from an expert (I've only used Mint), but I see a lot of people recommending Bazzite. You should definitely test on Bazzite, but it's immutable and so that'll probably cause a lot of issues. I'd recommend strongly against Bazzite for gamedev.
I think basically any major distro will work (Ubuntu, Mint, OpenSUSE, Arch). ~~You'll probably need to run the software in bottles, so if it supports bottles then it should work for your needs~~. Only go with Arch if you're willing to sign up for some extra work.
Be sure to make backups. That way it won't matter if you brick your OS.
EDIT: It supports Linux, I was on the wrong page. ~~It explicitly supports Red Hat (Fedora) and Rocky Linux, OpenSUSE is similar to them, so go with one of those three I guess.~~
EDIT 2: They recommend Ubuntu. Test on Ubuntu and Rocky. I'd go with Rocky just because I hate Ubuntu (on an emotional level, I don't think they're evil or anything).
Oh I see, when you go straight to the Epic Games Store page it doesn't have a download for Linux and doesn't even say Linux is supported.
But that link says Red Hat Linux 8 or Rocky Linux 8, so OP should probably use Fedora or Rocky. Rocky's a bit of a no-name though so forum support might be lacking.
when a particular distro is recommended, almost every time it just means "this is what we have actually tested it on" so as long as your distro has the correct packages/versions available there is a very good chance it will work even when not recommended
It is immutable but ships with distrobox and boxbuddy, which lets you easily create linux containers with mutable systems (i.e. I am currently developing on a fedora container with Qt Creator, for example) and you can install your packages in that terminal.
No chances of breaking your main OS.
I set up my instance like follows:
Boxbuddy -> New distrobox container -> Fedora -> Give it a name.
Wait for the installation (should be about 300MB IIRC).
In the start menu you will now be able to run your instance's terminal (search for your instance name).
sudo dnf install qt-creator
Back in boxbuddy, in my instance I selected "show installed gui applications", selected Qt Creator -> Add to applications menu.
Qt Creator then shows up in the start menu (search for either Qt Creator, or your instance name).
It will run in the container, but has full access to your home directory for development.
I could then install all my other required packages from the same terminal that I installed qt-creator from.
Easy peasy.
Disclaimer: Typing from my phone. The instructions may not be exactly like I said, but those are the steps.
No terminal magic is needed in Bazzite to make this work.
For the new people on Linux, think of my impression playing with the different OS;
Similarities between Windows 10 and macOS is around 15%.
Similarities between Windows 10 and Linux Mint is around 20%.
Similarities between Linux Mint and Ubuntu is around 95%.
Similarities between Linux Mint and Fedora\OpenSUSE is around 90%.
Similarities between Linux Mint and Arch\CachyOS\Manjaro is around 85%.
And with Flatpaks/Snaps I would even now narrow the difference in the Linus OS as 95, 92 and 90% similarity. For what linux cannot do for you, unless it needs high processing or gaming anticheats, a Virtual Machine with Windows will just cover you without any problem.
What makes look different in Linux is the desktop environment (KDE, Gnome, Cinnamon...), no much the distro per se. Find the distro environment you like after playing 20min with it, and choose the Linux flavor you are ideologically/persuaded with the most... don't worry about the rest.
I want to recommend pop OS but it would be wise to switch to it after there is 24.04 (or later release)
In my personal experience pop os has been absolute rock solid especially with flatpaks However latest stable is quite old (they are working on new desktop environment before upgrade).
Right, and I'd add a default option, e.g. "Unsure what to try first?" -> Yes ( Not -> rest of chart) -> "Try Debian Stable" -> "Do you like it?" (rest of chat)
It's rare that a software compatibility is distribution specific but just in case for games you can verify with ProtonDB and for the rest WineHQ AppDB. That's assuming there is no native support which in this case according to a quick DuckDuckGo search returns linuxvox.com/blog/unreal-engin… indicating that it seems fine.
So... I'd suggest you pick whatever distribution you heard most about, if you are unsure I'd advise on Debian (Stable) but honestly I don't think it matters much. There might be slight difference in hardware support and performances but assuming you use mainstream hardware it hopefully should have minimal impact.
Regardless of what you choose, document the process and as long as you learn while doing it, you're going forward!
If you are in rush... maybe postpone the transition to after that project or do it with a 2nd computer.
Unreal Engine is a powerful and widely - used game engine developed by Epic Games. While it is well - known for its support on Windows and macOS, the Linux version of Unreal Engine also offers significant advantages.
Update: installed mint and i am excited so far. didn't test unreal yet, but gaming perf was great. Customization is really cool and i already got it to look modern with some theme icon combinations. Made a 🥭 in gimp as my home icon. Ran into very little issues so far. Except for one, where suspend instantly wakes up the pc and is therefore unusable. But i will figure that out another day.
Definitely update us on UE, I've haven't explored the EU or Unity on Linux, and it would be nice to know if they work, because "you can use Godot" doesn't work for everyone.
Except for one, where suspend instantly wakes up the pc and is therefore unusable. But i will figure that out another day.
Is this just an automatic suspend after inactivity? Because if so, I think it the inactivity timeout can be disabled in the settings menu, as a workaround until you can figure it out.
I got unreal working by simply unzipping the binaries you can download. It runs great, i would argue even faster then on windows (lumen enabled). Building an app in Linux worked out of the box. Some minor issues i had, left alt did not work. Figuring out how to make a launcher icon. After an update it needed new driver update aswell. Still no IDE to use C++ currently trying Rider.
Much better than I'd expected, that's great to hear! The minor bugs are always annoying, but like you mentioned, the speed boost hopefully outweighs it.
I’m looking at suse tumbleweed for an upcoming build. Ubuntu is getting obnoxious, mint is ugly and way behind on Wayland support and fedora I can’t really trust at this point as it’s a community version of a corporate American product. Like I could ignore the corporate stink before but -gestures broadly- not in this climate.
I liked arch but now that bcacheFS is getting yanked out of the kernel I don’t really have a reason to manually do so much myself anymore.
For example I would selfhost Mastodon with me@fedi.com but then decide to change the server software to GoToSocial but keep the same me@fedi.com. Would everyone who was following me@fedi.com keep me in their follower list or would whole fediverse crash?
I'm not a technical person, so i don't really know, but from a blog i read about switching from lemmy to piefed, i guess there should be some problems :
I also changed the URL from jemmy.jeena.net to piefed.jeena.net because I don't want the other instances to be confused when suddenly a different software with different contents is available under the same domain. But I'm thinking to start up Lemmy and unsubscribe from all communities and to delete the one community I have on my Lemmy instance which has only very few subscribers.
That at least would be a somewhat clean way to dispose of this lemmy instance. Oh and I should return a 410 Gone to indicate that it's permanently gone.
while I don't know the answer to the question, I am very certain that
or would whole fediverse crash
is not it; if that could make the whole fediverse crash, someone could do it maliciously. At most it will cause problems delivering your messages or delivering messages to you.
It definitely depends on the software, for example in matrix you can easily cause federation issues in some cases. this won't blow up the fediverse, but it could impact the user experience if they rely on or interact with that instance.
Welcome to a new issue of This Week in Plasma!
Every week we cover the highlights of what’s happening in the world of KDE Plasma and its associated apps like Discover, System Monitor, and more.
Apart from that I am looking for a solution to a personal issue (see my other comment), I posted this because I was thinking this could be a great way to support other new Linux users and friends.
When I tried RustDesk it was not able to easily function on headless systems, including servers and my desktop PC if the monitor was powered off. Has that changed?
Anydesk and Teamviewer don't have that problem, but both companies have had hacking incidents and Teamviewer actually blamed their users instead of taking responsibility. Allowing 3rd parties of any type remote access to my computers is IMO just asking for trouble, especially for always-on systems.
Wireguard plus VNC isn't as seamless but it works fine the vast majority of the time. When I occasionally need features that VNC doesn't support, NoMachine is a full-featured, free for non-commercial use alternative that works great with WG.
Edit: It looks like the latest release of NoMachine now offers a intermediate network service that operates like Teamviewer and Anydesk. Access via intermediate network ID is not enabled by default, so with it disabled it should theoretically be more secure than the other apps.
I remote to a Mint on a laptop with a closed screen, and pop_OS that doesn't have a screen. (Second one has my jellyfin server). Connecting from my android phone and even my Windows laptop at my last job
Yeah if you still run into an issue for some reason add a virtual monitor in Windows, or "sudo rustdesk --option allow-linux-headless Y" (it's in the GUI as well) and it should take care of it, but I haven't had to do that
Ah, I haven't tried Apple products. Works with Mint, Android, PopOS, Debian, without any tinkering in my experience. I remote from my phone to my media server/laptop/and other junk when needed.
I was talking with my brother who was supporting our mother on her Windows laptop. He was using TeamViewer for years but that company now requires to subscribe to an expensive license on top of this is a really security- and privacy-sensitive kind of access.
His main requirements are that the new solution are:
safe
very easy to use for the supported person
better works without VPN, public ports etc though this isn't mandatory.
So, it needs to be easy. I was first thinking in VNC but while I have been using TigerVNC for years in Home Office, this looks not exactly as easy as TeamViewer.
Last week was talking with our stand-in admin at work who turns out to know Linux well. He said he has very good experiences with RustDesk, uses it for home office and also for remotely accessing Windows machines.
There was some concerns about where it was being developed, I think it's entirely Chinese devs.
Ha, I am thinking since a while that for preventing one's internet access being hacked by a foreign power, it's probably best to chain an American-made router with a Chinese one so that they can firewall each other 😉
Such attacks against infrastructure are to be taken serious. But the xz-utils case and Stuxnet also have shown a few things:
Such attacks are incredibly time-consuming and expensive to mount.
Once sn attacker hits such a target, they have blown their powder - they can't continue to use it.
The xz-utils case shows that open source's many-eyed principle works astoundingly well.
xz-utils also confirms that in open source software, you can close a detected backdoor within hours - even if the maintainer of the software does not want that, since you can fork it in seconds. (And using Rust only makes this easier).
So, this topic of foreign state-actor backdoors is less a thing for individuals to worry about. (I agree that lawmakers of democratic states should absolutely worry about this, here a good article be Bert Hubert on the topic.)
However what is actually dangerous is the erosion of privacy and the rising amount of mandated surveillance. But if one is worried about that, one should not use closed-source software in the first place.
I also avoided it for some of these reasons, but in the end it was just the setup that got messy. I ended up using Sunshine/Moonlight for an overall nicer experience. I can use it to stream games if I’ve got a good connection, or toss it in low bandwidth mode for remote admin work. I run it behind Tailscale to access it from anywhere, it supports Wayland, it’s all fully open source, and I’m very happy with the setup.
I host Apache Guacamole on my server, and then VNC/RDP/SSH on the various PCs and servers on my network, so I can connect to them from anywhere, as long as I have a browser, my password manager and my 2-factor auth.
I have used many different RDP's, but RustDesk seems the best option. Yesterday I had to configure my Steam Deck and I am glad that RustDesk can be found in the Discover software manager.
I ran a Rustdesk server and it is constantly unreliable. It's very likely it's my fault and I lack the skills to fix it. I just decided to use Anydesk instead.
"Jailbreak (1976 London Clip)” by AC/DCListen to AC/DC: https://ACDC.lnk.to/listenYDSubscribe to AC/DC on YouTube: https://ACDC.lnk.to/subscribeYDWatch more ...
The poll found that more than 60 percent of all voters now support deportation of undocumented migrants, with Hispanic voters showing a notable uptick. In contrast, 34.7 percent opposed deportations, and four percent were unsure. Among Hispanic voters, 50 percent supported deportations and 48 percent opposed. There was a seven percent increase in overall support since May among this demographic, with an 11 percent rise among those who said they "strongly support" the policy. Among Black voters, 53 percent supported deportations, while 37 percent opposed. Overall support among this demographic increased by three percent since May. Meanwhile, support among White voters was 65 percent, while 31 percent opposed. Overall support fell by three percent since May.
The percentage of Hispanic voters that strongly support deportations of people in the U.S. illegally rose by 11 percent in two months, according to a new poll.
Join Petter and Ben for this breaking news live stream, where we will be discussing Air India 171 and the shocking details from the interim report, that has ...
This is the full video of “Somewhen”, one of the tracks from my debut album Zen Garden, which will be released on August 22nd, 2025, on nWog Records.We recor...
Join us for an unforgettable performance from 1971 at Copenhagen’s famed Jazzhus Montmartre, featuring the soulful tenor saxophone of Ben Webster and the fie...
*Thought I would include this Special Free "Rhythm Changes Phrases" PDF download for all saxophones here:* https://jeffpifhermusic.lpages.co/rhythm-changes-p...
So if you do the Docker setup, obeying the instructions and substituting everything that needs to get substituted, but don't proofread the files in detail and so miss that line 40 of docker-compose.yml doesn't have the variable {{domain}} like in every other location you need to write your domain, but instead just says LEMMY_UI_LEMMY_EXTERNAL_HOST=lemmy.ml and so you fail to change it away from lemmy.ml... then, everything will work, until you type in your admin password for the first time, at which point your browser will send a request to lemmy.ml which includes your admin username, your email address, and the admin password you're trying to set. And, also, of course your IP address wherever you are sitting and setting up the server.
I have no reason at all to think the Lemmy devs have set their server up to log this information when it comes in. nginx will throw it away by default, of course, but it would be easy for them to have it save it instead, if they wanted to. And my guess is most people won't use a different admin password once they figure out why creating their admin user isn't working and fix it.
@dessalines@lemmy.ml @nutomic@lemmy.ml I think you should fix the docker-compose.yml file not to do this.
Uh huh, just like how the instance/user block being horribly implemented to where it's just a barely functional mute is just a (4 year) "oversight". Funny how their "oversights" just so happen to have benefits to their efforts to push authoritarianism
Documentation of Lemmy.ml's Extremism [Megathread]
Good job everyone blocking and boycotting .ml! It's having an effect, users are noticing and MAUs on their comms are falling!
And for anyone asking "Why are we boycotting/blocking lemmy.ml?" Here's a quick recap:
Lemmy.ml is an instance run by admins who are hardcore tankies and will enforce their ideology on their instance through various means from allowing (and pushing it themselves) propaganda (Such as Russia being justified in some way to invade Ukraine) and known propaganda outlets (Like RT) to removing content on their instance critical of their favored authoritarian regimes such as Russia or China and even banning users for such speech or speech critical of them if it's off their instance (Just like the Reddit mods of ol!).
If it was just some random instance it would have been defederated from long ago like the rest of the "Tankie Triad" (Hexbear and Lemmygrad), but they've positioned lemmy.ml as the "flagship" instance and abused that position and influence to become large enough to keep other instances from defederating from them.
Which I believe is harmful to the Lemmy-verse's overall growth and outside reputation. I have seen it come up before on Reddit threads (and other testimonials from people who came back and tried it again) that "They tried Lemmy but it was a bunch of tankies and went back to Reddit"
I don't know about you, but I'd prefer Lemmy to not end up with the reputation for being "Tankie Central " or even worse "Voat 2.0".
So if you haven't joined the boycott yet, join today and help us foster a better healthier Lemmy-verse!
You can take a look around here on !meanwhileongrad@sh.itjust.works for documentation of it or checkout this list of curated documentation
::: spoiler Evidence of bans, censorship and bias to push their "ideology":
"Don't worry guys, the Uyghur Genocide was REALLY just birth control! ~dessalines, .ml admin, dev lemmy.world/post/30580167
"See! nobody died IN Tiananmen Square, just AROUND it, so it doesn't count!!" ~ Davel, .ml admin lemmy.world/post/30673342
A .ml admins' (davel) response to a valid report of "NK is actually good" propaganda/misinfo lemmy.world/post/32627834
"The China censorship tool isnt actually censorship! And if it is, it's actually a good thing a state has that much power!" ~Tankies of .ml lemmy.world/post/30010789
I have a special syringe for this. I had impacted ear wax a few years ago and I went to urgent care to get it rinsed. Turns out my other ear was also impacted, just not as bad. After the rinse, I could hear in 3D. I felt like I shouldn't have been allowed to drive home because it felt like I was on acid it was so overwhelming. On the drive home I heard a crappy Honda with a bad exhaust drive by and I was scream-laughing at how visceral it was.
Now I rinse regularly in the shower and don't get to have free acid trips 🙁
Fallout Season One behind the scenes shows how the hit video game was adapted into a drama series from LED stages, jet packs, production design, costumes, an...
There are alot of emulated display devices available in qemu. This blog post introduces them, explains the differences between them and the use cases they are good for. The TL;DR version is in the recommendations section at the end of the article.
MILWAUKEE—Calling the effort a long overdue attempt to address the city’s checkered history, Milwaukee officials announced Friday that they had removed the iconic riverfront Fonzie statue amid an ongoing reckoning with the town’s greaser past.
Piraeus, Greece — In a powerful act of international solidarity, five major unions representing port workers at Greece’s largest port have issued a joint statement condemning the Israeli assault on…
End of the road. Wish I could say it's been a fun trip, but that would be a lie. Running this instance started out as a fun project, but it has been nothing but a nightmare for a long, long time.
This project has been discontinued and the repo archived. I am done with Lemmy, the Fediverse as a whole, and have no desire to continue developing for the platform or (especially) the demographic thereof.
Wow, what the heck happened? Do we know the dev's lemmy username for any clues?
End of the road. Wish I could say it's been a fun trip, but that would be a lie. Running this instance started out as a fun project, but it has been nothing but a nightmare for a long, long time.
The specific "burned out" is a common killer among folks that try this: community management
"Well, two years in, and I cannot say this place is any better, just differently bad if not worse. Too many people here seem to think that because it's not "corpo social media" that anything goes, and boy do some people really run with that."
I can't say I blame them. People can be horrible. Managing a community also means managing the worst of people. I had a former employer that did community management of a dating site. The level of mental trauma the front line workers endured was more than I could imagine. This is also why I completely understand instance admins that follow an aggressive blocking/banning approach. Beehaw put up tall walls and defederated aplenty. Blahaj.zone actively bans based upon user activity that is even on other unrelated instances. I can't fault either of these approaches because the alternative is dealing with the worst users en masse.
I hope that instance owner/manager gets some of that much deserved rest.
Sounds like someone wasn't prepared for the reality of human interaction on the internet. I mean its completely fair to say that they don't want to deal with it, but also what did they expect?
When you moderate a platform that the public is free to upload anything to, you will see everything. From insults to threats to gore to CSAM. Thats how the internet is. That is the worst part in my opinion, because you cant just look away, but actually have to deal with it.
I agree with you. However, I don't think most people understand that. For most folks they haven't been exposed to the most mentally darkest souls among us.
This really is a complicated problem, but if the fediverse wants to grow without relying on slave labor for moderation like Meta and the rest, then we have to find ways to lighten the load on moderators. Thats why creating transparent pre moderation tools like the image scanners used by many fediverse instances is so important.
This one is a very basic CSAM scanner that goes through lemmy image storage and just deletes stuff it deems bad. github.com/db0/fedi-safety I havent tried it tho, so i cant attest to its quality.
Im sure there are tools made for mastodon too, since it has a lot more users.
I totally have to disagree. Instance owners are attacked here on Lemmy for trying to keep their instance in line with the local laws where they live. You know, which they totally have to keep free of legal trouble that might cost them a lot of time, money or even put them into jail. It's not great when admins have to deal with utter idiots in their free time. Remember the whole Nicole fiasco where some poor girl was harassed via a spam attack? Remember that spam attack with the scat porn? All this hate going around with the war in the middle east? I can totally understand why someone burns out dealing with this crap in their free time. Come home from work after a hard day. Another scat spam attack you have to deal with. Another Hamas sympathizer calling you genocide lover because you deleted his propaganda. Someone else attacking you because you removed content that is illegal where you live and you hope that no authority saw it before you deleted it. Go to bed. Go to work. Repeat.
We arent really in disagreement tho. I am absolutely empathetic with their situation and their burnout. Im just saying they should have seen it coming. Those two things arent contradictory. I just find it odd how one can invest so much time into a public project, without being aware of the realities of having to moderate it. Im thankful for the people that host instances, but i will never do it, because i know how much of a pain it is.
Not sure if "they should have seen it coming" really is the way to think about this. Yes, moderation is hard. Yes, it makes sense to build a team doing moderation. But let's be honest, Lemmy is insaner than other forums due to its federated structure.
Since you're on the same instance as me, I assume you are a mod/admin there. Let me use this opportunity to say thank you to you and all the other mods on feddit.org for helping to keep that place one of the most pleasant online spaces I've come across in my years on the internet. As far as I can tell from the outside you and the others are doing a great job.
A bit offtopic, but why would anyone want to keep their instance in line with local laws? Aren't internet sites operating under jurisdiction of where they are hosted? Or is it just some coincidence that those people decided to host their stuff at datacenters at their local proximity? When I'm choosing hosting the first thing I think about: "hmmm I shouldn't host in country where I live because I don't want to ever have any problem with local authorities, and if I host elsewhere authorities there won't be able to reach me physically so the worst thing that could happen is the site gets shut down".
There are multiple reasons: If you want to fund your instance by donations, you need to be able to act under your real name. You might get away with a totally anonymous instance which you are funding via cryptodonations and which you are hosting at a provider who really does not care about KYC, but that is also illegal in many jurisdictions. There is totally a case for a lemmy instance admin to be known publically, to be able to interact with the community in person, to be able to go to meetups or to be able to give talks at conventions.
And if you are not living in some country with totally crazy politics, most local laws are totally fine. Do not post hardcore pornography. Do not spread hatred or calls for murder and hate speach. Keep the piracy a little bit less obvious. Don't allow hardcore pornography and have a solid process to keep child porn from your platform. That might be different if you're living in Iran, Saudi-Arabia or Afghanistan, but in a western country it is totally ok to be in line with local laws.
Read his rant. It just sounds like he’s mad at us for being mean towards the poor wittle billionaires/nazis.
Considering how few references there were in the post, and your projection onto it. I think you may be part of the group he's talking about that is causing him to close up shop. Its just my speculation though. If I'm right, how does that make you feel? Are you happy he's closing up the instance and leaving the Fediverse or are you sad that a heavy contributor to the Fediverse is leaving?
He's explicitly talking about detracting people who are "violent" and call him a "bootlicker" for "deescalating". It seems like it's moderator speak for "people are saying politicians/billionaires should die and that personally offends me". It's enlightened centrism. People came to Lemmy explicitily because Reddit bans you for disliking billionaires now.
Like, the entire concept of the Fediverse is anarchist. It's a collection of decentralized servers who can connect to each other but have their own rules. Someone going to develop for the LITERAL ANARCHIST SOCIAL MEDIA STRUCTURE and then getting surprised that everyone on it is anti-capitalist and anti-billionaire is the epitome of arrogance and lack of self-awareness.
Again, I ask: Why are you surprised that literal anti-capitalists hate billionaires?
You're making authoritative claims to what the Fediverse is, who the people posting here are, and what their collectives beliefs and goals are. The Fediverse certainly isn't a monolith that you can do that to. Hate isn't an identity, nor is it the goal of the Fediverse. I think this part of the original closure notice may apply to your line of responses here.
"The worst part is that they're so caught up in their own self-righteousness that they can't see they're just as bad or worse than what they're spewing violent rhetoric at; trying to talk sense into anyone or de-escalate things is immediately met with "bootlicker", wild accusations, and/or worse."
Where are you seeing mention that the coma contributed to the choice to discontinue? I see in the !30rock@dubvee.org post that the community will be shut down despite the fact that the only mod is not able to even protest that decision or anything, but no other mention.
I mean, if you wanted to be in the literal anarchist social media network structure and not see people hating billionaires/politicians/nazis, why did you come here in the first place?
The entire concept of the Fediverse is anarchist. Of course anti-capitalists at large would be on it, because the capitalists are all over every other social media network. And besides, Tumblr constantly tells billionaires/politicians to die despite being corporate-run social media and literally nothing comes out of it.
It sounds like he was severely trolled. Those aren't real people, they're either bots or paid accounts to make people leave. There are ways to counter act it, it's too bad he's given up. I wish him the best.
The average Lemming has the nuance of a wrecking ball
He’s not wrong lol. I can imagine how much worse it is as an admin. It’s unfortunate that Tesseract is going down with the ship. I remember I was among the first to provide feedback when he first posted it on lemmy.
I'm working on a new fediverse software but I'm mostly a backend dev. But I have been learning Svelte/Kit to try and write a frontend. Just putting it out there in case you feel inspired to work on something entirely new 😀
There are terrible people everywhere and in particular everywhere online.
This is why I would never be bothered moderating and I am reluctant to release anything to the public of what I do for my own enjoyment. Cheers to moderators and people that post their art and comics and other stuff online.
I feel the state of the project is still too early to be public (especially the frontend, there's really almost nothing there yet), but I can invite you to the repo if you have a user on Codeberg? I'd love to talk if you have a Matrix user.
Friendly reminder that the only way lemmy can be successful is if we create a culture that is enjoyable to be a part of. It sounds like his time here was not so positive, and that's deeply saddening.
I'd rather ensure that I have something a bit more concrete to show before I "announce" it. First impressions matter a lot. And also, there's just not a whole lot to show right now and it is not in any kind of usable state so unless someone is truly interested in working with me on this project (with a somewhat similar idea of a vision of where it's gonna go and all that...), there's really no use in sharing it.
unless someone is truly interested in working with me on this project (...) there's really no use in sharing it.
Yeah, but doesn't it go both ways? How can people find out if their vision is aligned with yours unless you show what you have?
I mean, I share the feeling of not wanting to make any big announcement when it's not usable, but at least putting out a link to the repo and some roadmap would help others to see if they would be interested in helping you.
It does - but I'm honestly also still refining that vision as I work on it and I want to have a coherent story and something to show before I show anything to the world. Just what I'm most comfortable with 😀
That's incredibly important too! I think people would be hesitant to work for even decent donations if people are assholes, but you're 100% right. I guess it really comes down to appreciating the people around you
You should appreciate the humans that create this social space by being here and being social, and appreciate the people who create this social space by building the space itself
Thank you for making that point, people being paid makes a huge difference.
Sorry not to hijack, but I’m in the process of adding PieFed support to my Lemmy client, if you’re looking for a new home. You can try it out at blorpblorp.xyz. I have a lot of work to do before I can live up to these more mature clients like Tesseract. Tesseract had some really nice media embeds that I’m missing.
Author: Nilesh Christopher, Valerio Pepe\ Published on: 11/07/2025 | 00:00:00
AI Summary:\ California Governor Gavin Newsom posted two photographs on X. X users immediately turned to Grok, Elon Musk’s AI, to fact-check the veracity of the image. For that, they tagged @grok in a reply to the tweet in question. Chatbots, including ChatGPT and Google’s Gemini, are large language models (LLMs) that learn to predict the next word in a sequence by analysing enormous troves of data from the internet. The outputs of chatbots are reflections of the patterns and biases in the data it is trained on, which makes them prone to factual errors and misleading information called “hallucinations” For Grok, these inherent challenges are further complicated because of Musk’s instructions that the chatbot our analysis of the 434 replies that tagged Grok in Newsom’s post found that the majority of requests, nearly 68 percent, wanted Grok to either confirm whether the images Newsom posted were authentic or get context about National Guard deployment. Notably, a few users lashed out because Grok had made the correction, and wouldn’t endorse their flawed belief. Grok was called on 2.3 million times in just one week to answer posts on X. Data accessed by Al Jazeera through X’s API shows how deeply this behaviour has taken root. X is keeping people locked into a misinformation echo chamber, in which they’re asking a tool known for hallucinating, to fact-check for them. Grok incorrectly blamed a trans pilot for a helicopter crash in Washington, DC. He claimed the assassination attempt on Trump was partially staged. Echoed anti-Semitic stereotypes of Hollywood and misidentified an Indian journalist. Grok vs Community Notes For years, social media users benefited from context on information they encountered online with interventions such as labeling state media or introducing fact-checking warnings. After buying X in 2022, Musk ended those initiatives and loosened speech restrictions. X piloted the “AI Note Writer” enabling developers to create AI bots to write community notes alongside human contributors on misleading posts. This human-AI system works better than what human contributes can manage alone, researchers say. X is trying to bridge this gap by supercharging the pace of creation of contextual notes. Grok gave inaccurate results on the death toll of the Holocaust, which it said was due to a programming error. In June, Grok cited data from government sources and Reuters. Musk has also chided Grok for not sharing his distrust of mainstream news outlets. X deleted the inflammatory posts later that day, and xAI removed the guidelines to not adhere to political correctness from its code base. Researchers expressed surprise over the reintroduction of the directive for Grok 4 to be “politically incorrect” despite this code having been removed from its predecessor, Grok 3.
If you’re an intermediate or advanced Linux user or sysadmin, you might have felt an odd fascination with the myth of systemd. I invite you to this deep dive into systemd's nuts and bolts. I'm not…
I started reading that because I want to learn more about systemd and ended up wanting to go back to DOS. Presumably it all makes sense, but when I tried to read it my brain stopped working and my eyes slid off the bottom of the screen.
I don't know why but I just found it incomprehensible.
This is the beauty of open source. If you wrote an app called “eeznuts” and mad it something everyone needed, eventually a sysadmin somewhere would get to explain that joke to a stiff EVP, and they’d both have a good chuckle about it.
If you’re a new or intermediate Linux user or sysadmin, you might have felt an odd fascination with the myth of systemd. I invite you to this deep dive into systemd's nuts and bolts. I'm not gonna beat around the bush: It's a hairy business, it will be hard, but I promise juicy and satisfying rewards if you keep pumping through this guide.
Let’s start by uncovering the “D” of systemd, the secret sauce that doesn't get the love it deserves: D-Bus.
I've very barely dipped my toes in dbus before, and the option to have something else is on its face attractive (not a fan of XML and the late 90s/early aughties style of oop), but JSON for a system interface?
I mean, Kubernetes shows that yaml can work, but in this day and age I'd expect several options for serialisation, and for the default to be binary, not strings.
String serialisations are primarily for humans IMO, either as readers or writers. As writers we want something with comments (and preferably no "find the missing }" game), so for that most of us would prefer something like TOML if the data is simple enough, and actually Yaml for complexity at the level of Kubernetes—JSON manages to be even more of a PITA at that level.
But machine-to-machine? Protobuf, cap'n'proto, postcard, even CBOR should all be alternatives to examine
JSON is not the optimal solution for either humans nor for machines... it's a compromise in-between that is more complex to parse than most binary alternatives (and even some text-based ones, if the data can be represented in CSV tables for example), while also often requiring post-processing through beautifiers and similar to be able to visualize it cleanly for humans.
There are situations where it's the format that makes the most sense.. like in the web, where you are already working with javascript anyway. But it's not a golden bullet to use everywhere.
Yeah, JSON is essentially a side effect of having JavaScript already. It makes sense that it shows up a lot of places, especially web. But just like with JS, it's not really good, just ubiquitous.
That was a lot of really good info. I've been having to deal with some more complex systemd configurations at work which has gotten me interested in the subject. This was a really good intro and will help a lot in my own self-hosted activities as well as work.
a slightly unrelated question. do the authors at least get paid for posting things on Medium? if not, why do that? I'm unironically curious. it's a bad platform no matter how you look at it: it's closed for unregistered readers, it's typesetting sucks ass... the only reason I could see, is if the authors actually get some of the ad revenue, in which case I'd much rather pay directly to the authors.
Yes, I do get paid. Sometimes considerably (for what tech writing can provide).
Indeed, writing tech articles on Medium has allowed me to get some extra income/free-time in between jobs, which I use to upskill myself and then share what I learn with the community (with some amount of friction regarding the paywall). This self-reinforcing loop is quite appealing to me, and - I would argue - aligns somewhat with my take on the Kantian categorical imperative.
For what it's worth, I like the typesetting. Medium also has extremely good SEO, likely from some direct negotiation with search engines, I assume. Eventually I plan to move my tech writings to my own blog, with some sort of minimal ad system, no paywalls. Also, I usually unpaywall my tech articles after the window of high income dries up.
I updated the post to use the "friend link" which should allow you to read for free. (I didn't realize you could edit the link on lemmy after publishing).
in which case I’d much rather pay directly to the authors.
All my stories have a link to my ko-fi at the end, but the income from that is significantly less than what I get from Medium directly.
Edit: Thanks @hayk@lemmy.ml for donating! Much appreciated!
If you’re an intermediate or advanced Linux user or sysadmin, you might have felt an odd fascination with the myth of systemd. I invite you to this deep dive into systemd's nuts and bolts. I'm not…
re: Medium I was genuinely curious why people use it, thanks for the clarification.
still as someone who writes only open source codes, it goes a bit against my religion, but I totally understand if your income depends on it! thanks for the text, and for the "friend link". as promised... ; )
Probably what all "good cops" think, "I can change the system from within" or "It's just a couple outlier bad cases, but I'll make sure to only prosecute actual bad people"
Metadata embedded in the video and analyzed by WIRED and independent video forensics experts shows that rather than being a direct export from the prison’s surveillance system, the footage was modified, likely using the professional editing tool Adobe Premiere Pro.
It will have a big CPU core for the first time. According to a new rumor, Qualcomm is currently working on a new chipset for smartwatches, codenamed Aspen...
Polish prosecutors have launched an investigation into far-right leader Grzegorz Braun after he declared the gas chambers at Auschwitz to be “fake” and said it is a “fact” that Jews have committed ritual slaughter of Christians. Denial of Nazi crimes is an offence in Poland that carries a jail sentence of up to three years.
Braun, who finished fourth in the recent presidential elections with 6.3% of the vote, made his remarks during an interview today with radio station WNET. The veteran far-right politician, who is a member of the European Parliament, has a long history of hateful and conspiratorial rhetoric regarding Jews and other minorities.
During the interview, Braun referred to what he claimed are the “lies of the Talmud, the Haggadah [two Jewish religious texts], and the Holocaust”. He said that Jewish organisations “condemn those who tell the truth that ritual murder is a fact and Auschwitz with its gas chambers is a lie”.
A longstanding antisemitic canard is that Jews murder Christians, in particular children, and use their blood for religious rituals. Meanwhile, many modern antisemites deny the fact that gas chambers were used at Auschwitz and other German-Nazi camps to murder Jews during the Holocaust.
After the interviewer contested Braun’s remarks, he reiterated them, saying that the Auschwitz Museum provides a “pseudo-historical account” about what happened at the camp and blocks research into the gas chambers. He also cited a book by an Israeli historian that he says proves Jews carried out ritual murder.
That led the interviewer to immediately cut short the broadcast, saying that there “are limits to political cynicism and sensationalism when it comes to several million victims and their memory”.
Subsequently, Anna-Maria Żukowska, head of the parliamentary caucus of The Left (Lewica), one of the groups that make up Poland’s ruling coalition, announced that she was filing a complaint to prosecutors regarding Braun’s remarks.
She accused him of violating article 55 of Poland’s law on the Institute of National Remembrance, which criminalises public denial of Nazi and communist crimes. Those found guilty can be punished by up to three years in prison.
Late on Thursday afternoon, the district prosecutor’s office in Warsaw announced that it had initiated an investigation into whether Braun had committed the offence of denying Nazi crimes.
Meanwhile, Piotr Cywiński, the director of the Auschwitz Museum, which is a Polish state institution, issued a statement condemning Braun’s “scandalous” comments, which he said were not only a violation of the law but also “an insult to the memory of the victims of the camp”.
“Grzegorz Braun’s words are not a ‘political provocation’, but a conscious lie and an act of ideological, antisemitic hatred,” said Cywiński. “They cannot remain without a decisive response from the state and all decent people – for whom the memory of Auschwitz is of particular importance.”
The museum director noted that, while it was primarily Jews who were victims of the gas chambers of Auschwitz, ethnic Poles, Soviet prisoners of war, and Roma were also murdered in them.
At least 1.3 million prisoners were transported to Auschwitz during the war, with at least 1.1 million of them killed at the camp. Around one million of those victims were Jews, most of whom were murdered in gas chambers immediately after their arrival. The second largest group of victims were ethnic Poles.
Cywiński said that the museum would itself file a notification to prosecutors regarding Braun’s remarks. He also appealed to Polish media to stop giving space to Braun, who “has repeatedly shown that he cannot function in the public space without vandalism, lies, hate speech and racism”.
Last week, Braun was presented by prosecutors with seven sets of charges relating to four incidents, including his attack on a Jewish religious celebration in parliament two years ago.
He is also being investigated over a series of incidents during the recent presidential election campaign, including when he vandalised an LGBT+ exhibition, made antisemitic remarks during a televised debate, and removed a Ukrainian flag from a public building.
This topic has had a lot of discussion, but backup plans are good indeed. Lemmy.wtf is small though, so I wouldn't worry about it and I believe Meldrik is coming back 😀 what happened with feddit.de was tragic. I wonder if they ever found out what happened to the admin.
I’m clueless about the discussions about this: but my concern is that, over time (years) most user activity will be on a handful of well managed instances. Smaller instances will come and go.
That's very possible! I mean as a user I also do like stability (had to instance hop quite a few times when I joined fediverse due to them shutting down) but also see resiliency and strenght in being able to spin up an instance of a platform we are all familiar with. When people leave reddit they don't have similar alternatives with many users, but on lemmy/piefed we can always migrate and stay on the same platform with different rules and administrators.
Of course that's simplifying the whole topic, but I'm not that worried about fediverse. But you are right of course that for new users who are on the edge already this might be a big dealbreaker. That's why I always suggest bigger instances first. Once you are comfortable with fedi/threadiverse you can migrate to a smaller instance (I did exactly that once I figured out how this all works). I know lemm.ee shutting down probably made a noticable chunk of people give up on fediverse because we didn't see any instance completely fill the void that lemm.ee's weekly activity left.
Any of them that use the Arch repos directly are probably fine. Don't use Manjaro.
I will say that Arch does now have a guided installer, so you don't need to do everything manually. Here's the wiki page for it: wiki.archlinux.org/title/Archi…
It’s had a few security issues in the past and last I heard they introduce a lag between packages going into the arch repos and things being available in Manjaro - even for critical security updates.
Any other derivatives are fine AFAIK, just not Manjaro. There's quite a bit out there about why you should avoid Manjaro. This source is older, but I've linked it before: github.com/arindas/manjarno
It probably is. I think there are newer examples available, but I lack the motivation to find them for others. I feel it still represents the fundamental issues with Manjaro, if not the current specific ones.
Agree. I went from Ubuntu to Arch many years ago and everything I read in the installation guide was new to me, yet I managed. "So can you!" If I did it...
Well when I was testing out distros last year, I wanted updated KDE, Wayland, BTRFS, Snapper, full LUKS (including the boot partition) and I wanted it all somewhat complete and configured with a GUI installer. I had spent way too much time mucking around in the CLI with Fedora trying to get all of that and I was over it. Garuda just delivered. I didn't know much about Arch at that time but man, it just works so well. All the issues I had with Debian and Mint and Ubuntu and Fedora, they just aren't a problem with Arch. And Garuda has it all configured out of the box. I'm sure there's some bloat in it - stuff that's included that I don't need. But I'm just happy everything I want is in there and I don't need to figure it out
Interesting, I don't use Linux on desktop (I've been using it on various Raspberry Pi SBCs since 2017 or so), but I am thinking whether to finally switch because Win11 sounds like a pain.
I was always under the impression that most Arch-derived distro were not really user friendly.
I feel that. Windows gives me the creeps since 8.1. Recently I setup a new Win11 machine and it took all day to get everything configured including figuring out how to turn off all the telemetry and spyware. I'll use it for work but I don't even like it on my network.
Arch from scratch sounds like an adventure. But there are many good arch spins like Garuda that make it easy, no drama.
I enjoy front-end configuration (Win11 doesn't allow the taskbar on top, a non starter for me), for everything else around the OS/DE, I want zero adventures. I want it to be as boring as possible.
One other big issue for me is that it seems the last version of Office that works somewhat well via emulation (Codeweavers) is Microsoft Office 2013. This is ancient release and there are lot of must have features in later releases if use Word/Excel/Powerpoint in a professional capacity.
I was always under the impression that most Arch-derived distro were not really user friendly.
Installing Arch from scratch is user unfriendly. Arch via a bundled distro (Endeavour, Garuda etc) is no different to install than the majority of Linux distros (ie pretty straight forward).
Usage wise the "user friendliness" once installed will more come down to what desktop environment (DE) you choose than the underlying distro. The only "heightened degree of difficulty" attached to Arch is that it is rolling release so the flow of updates is constant and you are expected to be aware of the implications of what you are updating (which in practise for me comes down to being subbed to the arch-annouce email list) and practising good backup hygiene so you can rollback if needed.
It lists 19 still-living Arch-based distros. Disregarding category-based recommendations and looking only at explicitly-named recommendations, as of this writing, you've explicitly been recommended 7 so far, or over a third of what exist. 😀
I don't recommend Manjaro. Its delayed release but no testing methodology has caused me grief a number of times. I still run a VM with it on it, but the only VM OS that has had more issues was windows
Archinstall if you're brave, endeavor if you aren't.
Although if you don't want to rawdog it, I'd recommend fedora or tumbleweed instead. The whole point of arch is that it's simple to keep everything on your head.
Watch on SkipVid platform, alternative to YouTube client watching YouTube videos indirectly, but without ads: skipvids.com/?v=-cTsFt-j7rk
I just found this creator who is super excited about the new Bash version. He goes through some aspects of the new changes and features. There is something funny about a guy getting so excited about a new Bash version, that I wanted to share it because of that. 😁
Also its nice to see the changes in action and have an explanation from someone who (seemingly) knows what he is doing.
Video (partial) description:
Source Code: github.com/bahamas10/bash-changes
$ whoami Yo what's up everyone my name's dave and you suck at programming! Connect with me on my socials below and if you're reading this you're legally required to subscribe to my channel.
$ cat source-code The source code for my YSAP series (or related videos) is available for free under the MIT License on GitHub: Source Code → github.com/bahamas10/ysap
Honestly this made me really sad that we're stuck with this archaic, awful language as a primary way of programmatically interacting with our computers. And I don't mean to say anybody has done anything wrong here - sh and bash were revolutionary and amazing for their respective times, and maintainers who are keeping bash alive now are heroes who deserve praise. However, many decisions made when sh was originally developed turned out to be footguns, still creating bugs today (despite shellcheck et al).
nushell is somewhat promising but flawed (because it has to be built on the same system interfaces as sh, after all). The most annoying is that there's no facilities for setting any metadata on data streams (in particular there's no way to set the format of the data) so everything has to be marshalled manually, which would be OK for a proper programming language but really annoying for a shell. At least it fixes most of the quoting, escaping, interpolation, substition etc awfulness, and allows for manipulating data in a more structured way.
I really don't know if it's even possible to make a language that would be a good convenient shell and at the same time not prone to bugs which are easily noticeable in other languages. I hope that something like this becomes a reality at some point.
If you want to do a Bash like management and programming, that is not dramatically different but fixes some irritations, then Fish is an alternative. Obviously it will not fix all issues, but there is no paradigm shift in handling streams. nushell is dramatically different and at that point, I would rather use a programming language to do the stuff. Speaking of programming language, there is also Xonsh (basically Python+Bash like combination as a system shell).
All these alternatives have a singular big flaw to me: they are not the standard tools on the system, which defeats the purpose of a system shell to me. In the end, without changing the core system that these shells are built on, I don't think its possible to make a really well made language that interoperates on system level like a shell does at the moment.
That's the reason why I got a bit more into Bash to understand some flaws, to understand how to use regexes inside Bash and variable substitutions and a few other concepts that are very useful to know. But man... there are so many traps... like looping over a wildcard for files (such as for file in *.txt) and if the wildcard does not match, then the loop consists of the wildcard as a literal word as if "*.txt" was a filename. What a stupid idea. There is an option to change that, but that's the issue. The language is filled with traps and optional options and you have to know all of them.
Edit: Added example code why default behavior sucks:
$ for file in *.ABCD; do echo "${file}"; done
*.ABCD
shopt -s nullglob
$ for file in *.ABCD; do echo "${file}"; done
If you're trying to avoid a lot of those traps, shellcheck is pretty cool. I have written my fair share of bash and yet still get caught off-guard by its warnings - and it's right most of the time!
Hello, iam in the making of artix install script. I start with setting variables in dialog like bootloader="refind" and etc. but when i do artix-chroot into chroot.sh script variables are gone.
But I suppose u are working in live environment loaded from iso ,so u should be already comporissed then if some process can read ur files. What's ur threat model
Passing them as arguments can be even worse - depending on the configuration, process arguments of running processes can be seen by everything running on the machine.
Pack it into a json or CSV oneline string and shove it in a CLI password manager you can access in a scriptable way from both users. (I use the linux tool, 'pass' for this).
Alternatively, save it to a dropfile that only both users can access.
Preferably, put the variables into a temp file (e.g. using mktemp) and bind-mount that file somewhere into the chroot directory, so you can source it from within that environment. That way the critical information, like the passwords, at least only gets to live in volatile memory and won't stick around on the host system after the reboot. That limits the exposure somewhat.
It would be more secure if the credentials are in an in memory SQLite Database but that would require you to use something other than the shell. You would need to do a hardware key or have the user do a bootstrap password or have an API that uses a public key to authenticate the remote process passing the credentials
A Windows-to-Linux “translation” tool for the 200M+ Windows 10 computers not eligible to upgrade to Windows 11, Operese transfers files, settings, and programs from Windows to a brand-new Kubuntu installation. It's still very much a work in progress, but in my biased opinion, it already doesn't look too shabby!
A Windows-to-Linux “translation” tool for the 200M+ Windows 10 computers not eligible to upgrade to Windows 11, Operese transfers files, settings, and progra...
Good luck to the dev! I think this will be a good tool to help some, and for the rest, hopefully we can get them onto something that fits them better (Mint, Aurora, etc.).
Nevermind, I was able to read the comments and the poster said "I WILL be open-sourcing the code ASAP, but I'm still working out exactly what that will look like, and I also have a few personal reasons for delaying." So there's not git yet for everybody else who is wondering.
So the UK is going to start requiring IDs to view adult content. I'm in the US, but I've got a friend in the UK who obviously doesn't want to deal with this.
I suggested he use a VPN, but he's apparently heard they sell your personal data. Can anyone recommend a reliable VPN that collects as little data as possible?
Though honestly, I’ll probably get around to a GPU upgrade eventually. Rocm packaging looks to be pretty much done on Debian, although they still seem to need time on the problem of keeping it reasonably up to date in Testing and Sid - momentum will probably pick up after Trixie leaves hard freeze and goes stable.
Honestly, it’d be kind of nice to have a project with a repo that does nothing most of the time except during the Testing freeze, in which it would deliver package updates and keep Testing as a rolling release during that time.
I get why Debian doesn’t do this themselves - they tried and found it hell to both prepare a stable release and package new versions.
Lutris is for managing games, and can use multiple different engines. Proton is one, but also Linux native games, dos, ScummVM, etc. Lutris also interfaces with popular stores like Steam, Epic, GOG etc. It's a game and gaming library tool.
Bottles is a general purpose wrapper for Wine. You can run games but also any wine software. It's a general purpose wine tool.
Lutris makes running games in proton easy. Bottles makes running apps in wine easy.
You can do lots of things with both, but that doesn't necessarily mean you should.
People have used Lutris for other apps because it was a more convenient wrapper for Wine than the defaults offered but it's not primarily designed for it and support will be limited. Lutris is designed to be a games library and that's it's focus.
I personally wouldn't recommend wine newbies to be using Lutris to run everything because if nothing else it would be annoying for the Lutris dev team to be dealing with "I can't get Microsoft Word working".
I also personally wouldn't recommend Bottles for games because of all the other features Lutris offers. I have a huge library of games and I wouldn't want to manage that in the Bottles interface. But I'm aware people use it for that and Lutris is one of its supported runners.
Bottles and Lutris complement each other and work together well. But lutris is designed to be a games libaray while Bottles is designed to be for everything.
I personally use Lutris for games (most of my wine use) and Bottles for a few other windows apps.
But the real star of the show is under the hood - it's wine and Proton doing the heavy lifting. Lutris and Bottles are tools to get the most out of them and it's choice which you use and how.
Does lutris support advanced configuration of disabling enabling dxvk ,switch of locales,easy tool to install windows dependencies for usual software not games,creating full prefix backup and restoring it later on other devices ,controlling environment variables?
Obviously. It too does wine environment management. But it's meant for games, and for wine specifically, Bottles is just nicer.
Lutris is massive overkill if you just want run the windows version of python in order to compile python code to windows binaries. Not to mention it just isn't as slick in terms of UX as a wine manager.
To be fair to bottles, they cité that even their hosting costs are usually barely covered, so I imagine it's running on a pretty lean/Foss dev budget already.
They use GitHub for the code already. Their hosting cost could be pretty much zero if they would use GitHub Pages for their website, and redirect their domain to that.
Content server: Add a checkbox in content server user preferences to prevent a user account from changing its own password via the web interface
Restoring database: Improve performance by an order of magnitude
Add a tweak to Preferences->Tweaks to permit displaying the sort value for series in the Tag browser
Welcome wizard: Change default output format to AZW3 for Kindle as MOBI is obsolete and all Kindles released within the last decade plus support AZW3
Add 'Search "not in"' and 'Filter "not in'" buttons to Manage authors and Manage Items
Bug fixes
Windows: Fix a regression in the previous release that caused terminal windows to popup momentarily when adding PDF files or converting them Closes tickets: 2115246
E-book viewer: Fix a regression in 8.4 that broke fading of the background image Closes tickets: 2115057
Tag browser: Fix clicking on categories to search for books by first letter of series not working correctly for non-English language books Closes tickets: 2116006
Edit metadata individually: Ensure Next/Previous buttons work even if something re-orders the books in the book list. They will now iterate over the books as they were at the time the dialog is created Closes tickets: 2115111
Windows: Generate catalog: Workaround for systems where a broken antivirus or similar holds open files in the catalog library causing a permission denied error Closes tickets: 2115084
Calibre is one of the great pieces of FOSS software, and demonstrates everything good about FOSS: it has regular updates; it's been around for simply ages; it works really, really well; it gets updates and new features and yet has never in my memory had a breaking, non-backwards-compatible release... it's stable; and it resists - in its way - the attempt by publishers to steal our rights and ownerships of our media.
I ~~contribute~~ donate to Calibre. I hope that Goyal has a successor lined up to take the helm who can continue such an outstanding contribution when he finally retires from the project.
I agree. I've been using it for years, since I moved away from Kindle. I only wish it would support socks5 proxy so I could use Tor for metadata downloads from Google or Amazon.
Good thing he doesn't go on You Can't do That on Television.
Donald Trump hasn’t been happy with Vladimir Putin lately, and he took out his frustrations with Russia’s president this week by announcing that the United States would resume sending military aid to Ukraine. When he was asked on Tuesday who ordered the aid to be paused in the first place, Trump delivered what has become one of his go-to responses whenever he’s pressed about the chaos his administration is unleashing on the nation and the world.
“I don’t know,” he said.
The pause on aid to Ukraine was apparently ordered last week by beleaguered Defense Secretary Pete Hegseth, who reportedly neglected to tell the White House about the move, leading to internal scrambling. Trump was asked whether he approved the pause while sitting next to Hegseth during a Cabinet meeting. The president only offered that the U.S. needs to keep sending “defensive weapons” to Ukraine because “Putin is not treating human beings right.” When asked who ordered the pause, Trump said he didn’t know. “Why don’t you tell me?” he added.
This would be far more amusing if he got slimed every time he said that.
Also, what kind of strongman doesn't know what's going on in his loyal junta?
Nanook
in reply to TowardsTheFuture • •Eggymatrix
in reply to TowardsTheFuture • • •Nanook
in reply to Eggymatrix • •TowardsTheFuture
in reply to Eggymatrix • • •Nanook
in reply to TowardsTheFuture • •whatsgoingdom
in reply to TowardsTheFuture • • •Snot Flickerman
in reply to TowardsTheFuture • • •Is there a particular reason you need an nvidia gpu? Like plans to do local LLMs or other projects that really require a nvidia gpu?
Because I am just so pleased with AMD for gpus in Linux. So simple.
Not knocking your choice, just trying to understand it. Everyone has valid reasons for why they choose their setups.
Edit: nevermind I am so confused by the new naming schemes I thought this was an nvidia, others have informed me its an AMD. Nevermind me I am a dingus.
don't like this
just_another_person doesn't like this.
TowardsTheFuture
in reply to Snot Flickerman • • •9070xt is an AMD… it’s just new… and I’ve seen a lot of posts saying you want kernel 6.13 or higher for it, and mint 22 is using 6.8. (And that you want mesa 25 but I don’t think getting that’s an issue?)
(I realize AMD changing their naming yet again makes that confusing.)
like this
just_another_person likes this.
thanksforallthefish
in reply to TowardsTheFuture • • •thanksforallthefish
in reply to thanksforallthefish • • •Lol at the downvotes, it's like 3 clicks. Not rocket science.
fosslinux.com/138008/how-to-in…
Mint deliberately uses an LTS kernel because it's primary value proposition is stability & simplicity but changing kernels is pretty safe.
How to install and try different Linux kernels in Linux Mint
Divya Kiran Kumar (FOSS Linux)TowardsTheFuture
in reply to thanksforallthefish • • •thanksforallthefish
in reply to TowardsTheFuture • • •I've put later kernels on Mint a half dozen times withno dramas, but whether you should depends on what your use case, preferences and skill are.
I personally wouldn't do the arse-ache that is an immutable system, but plenty here love their Bazzite it seems. Different strokes for different folks. Nothing wrong with that.
If you love Mint except for the kernel version then it's an easy fix. If you don't have deep feelings then either try & be ready to ditch, or pick an alternative.
Just for the record there is no "doing all that" about it. It's a simple couple of clicks. It couldnt be easier. I'm not sure where you got the idea it was difficult.
TowardsTheFuture
in reply to thanksforallthefish • • •pyssla
in reply to TowardsTheFuture • • •I get the impression you've been enticed/subjected to some confusing technical jargon without noticing. Please allow me to shed some light.
Stable can mean a bunch of different stuff that may or may not be closely related. In the case of Debian, it's the name of its default release; the one in which packages are frozen for two years except for security patches. (Note that this naming scheme is not unique to Debian.) As such, a Debian installation will be unchanging for these two years, earning its stable designation (which, to be clear, just meaning unchanging in this context). Finally, this unchanging environment should provide a ton of stability (i.e. stuff just works), which is also referred to as stable. These three distinct meanings of stable are probably the ones you'll come across the most.
The bold part is a clear demonstration that you understood stable to mean strictly robust; i.e. the third meaning discussed above. And to be clear, Fedora does a decent job at providing a reliable experience. (Bazzite even more so.) But not all three meanings of stable apply to it:
- For Fedora (and thus Bazzite by extension), the only stable repository is the one used to create its ISOs (i.e. the images used for installation). Beyond this, some packages are frozen within a release/version; e.g. you'll never get a major release update for GNOME unless you do a major release update for Fedora. But..., that's basically it; (almost) all other packages receive regular updates. As such, Fedora is often referred to as a semi-rolling release distro instead (as opposed to Debian being referred to as a stable release distro). So, to be clear, Fedora and Bazzite are NOT stable in this context.
- As (most of) its packages receive regular updates, it isn't unchanging either. And thus, NOT stable in this context as well.
- However, in terms of offering a robust/reliable experience, Fedora is pretty good. Bazzite is even better due to its atomicity^[That is, updates either happen successfully or not at all. So a random power outage (or otherwise) is not able to break the system's integrity.] and the superior distro-management allowed by the
bootcmodel.So, to answer your question, Fedora and Bazzite will not crash regularly. And, while Fedora might fall a little short of providing as robust of an experience as you might find on Debian and Linux Mint (assuming you won't FrankenDebian your installs), Bazzite may actually rival (and perhaps even eclipse/surpass) Debian and Linux Mint in this respect.
For your purposes, I agree that going for the Bazzite-route seems to be the easiest.
This is a nuanced discussion that probably deserves more attention, but I'll keep it short for the sake of brevity. In Bazzite's case, strictly-speaking, immutability refers to how most of
/usr's content isn't supposed to be changed deliberately by you. This is enforced by the system (in part) by making those files read-only.In practice, though, there's very little you actually can't do with the system:
- AFAIK, you're forced to use GRUB; which AFAIK is the most used bootloader anyways. Here's a thread discussing support for systemd-boot.
- No support for UKI at the moment. But progress on this has been accelerated (relatively) recently; .
- The situation around dkms/akmods still ain't great and leaves a lot to be desired; you're basically limited to the ones found here. Thankfully, this is something else that's actively being worked on.
- While installing from Fedora's repository through
bootc/rpm-ostreeis possible, it's actually discouraged in Bazzite's case. Thankfully, there's a plethora of different means to the same end. Furthermore, sysext have come a long way and might become our go-to eventually.systemd-boot support
refi64 (GitHub)TowardsTheFuture
in reply to pyssla • • •pyssla
in reply to TowardsTheFuture • • •TowardsTheFuture
in reply to pyssla • • •pyssla
in reply to TowardsTheFuture • • •Thanks for reporting back!
Glad to hear that it has been a pleasant experience overall!
The "force me to enter a password any time I open my browser"-thing seems like unintended behavior. Pretty strange. Glad to hear that it has been resolved, though.
Perhaps you've already undertaken what I'm about to say, so please feel free to ignore this if that's the case: Have you reached out to their Discord server in hopes of resolving the issue? While their documentation is pretty great, it's possible that it ain't sufficient. Whenever that happens, the Discord community can (and probably will (at least in my experience)) step up and provide excellent guidance when prompted.
Home
docs.bazzite.ggTowardsTheFuture
in reply to pyssla • • •Idk about the browser thing it was because the kde wallet or something? It stores passwords and the browser has a login so it would force me to do that every time. Same with email and such, very annoying. I think I have it all working fine now.
As far as what I could not get working, I was able to just set up mouse profiles to do mostly the same. Good enough of a workaround. It’s an old program separate from the game that seems to look at the active window to contain “Guild Wars 2” and if it is, hitting a button will change mouse clicks to whatever buttons. (And hitting certain buttons or not being in GW2 will disable that) so like… idk how Linux works but I feel that ain’t gonna happen without changing it, and the dev has fucked off 13 years ago (and I might be the literal only person still using it.)
pyssla
in reply to TowardsTheFuture • • •Ah okay, thanks for the clarification! I have heard of that interaction elsewhere. Unsure if it's KDE Plasma misbehaving or otherwise. Regardless, I'm glad to hear that you were able to resolve the issue. I did find this discussion (which you may have found yourself as well). In their case, they (somehow) didn't properly create an account, which opens multiple can of worms you'd much rather not deal with. Thankfully, the fact that you were able to deal with the problem suggests that you should be fine 😉.
Bazzite - KDE Wallet constantly popping up
Universal Bluepoinck
in reply to TowardsTheFuture • • •maxwells_daemon
in reply to TowardsTheFuture • • •just_another_person
in reply to TowardsTheFuture • • •pastermil
in reply to TowardsTheFuture • • •data1701d (He/Him)
in reply to TowardsTheFuture • • •While (I think) you can install HWE (hardware enablement) kernels on Mint, you would also have to upgrade Mesa, which is not as easy on Mint.
Personally in this case, for a truly stable distro, I’d install Debian Stable and install a backports kernel and backports Mesa, which are both currently versions that should support RDNA4 GPUs like OPs just fine. This involves two simple steps after installing:
1. Enable the Debian Backports Repo (see backports.debian.org/Instructi…). It’s like, one file.
2. Install the packages with something like
sudo apt install -t bookworm-backports linux-image-amd64 mesa-va-driversand reboot.Before you take these steps, you probably won’t have hardware acceleration, but will still get video output so you can perform the steps and reboot.
This is definitely a weird suggestion, and other people’s suggestions might be less work out of the box. I just like Debian, and stability+backports+testing is part of what makes it possible for it to be my everything distro.
Instructions
backports.debian.orgTapionpoika
in reply to TowardsTheFuture • • •knfrmity
in reply to TowardsTheFuture • • •I just grabbed a 9060XT open box deal without thinking about driver support, I'm using Mint 22.1 as well. YMMV but I can't get any kernel besides 6.8 to boot, not even the Mint supported 6.11 HWE. Video output works but the drivers don't load and even scrolling down a webpage gives me screen tearing. I did get a more recent Mesa version with the kisak ppa but it hasn't helped. Can't even go above 60Hz refresh rate.
I tried Ubuntu 25.04 on a LiveUSB and it's basically plug and play and might have even automatically switched to the 144Hz monitor refresh rate.
I don't have a whole lot of time for getting a new distro set up right now. I will wait until Mint 22.2 (coming soon? with a newer kernel hopefully) and see how that goes.
absGeekNZ
in reply to TowardsTheFuture • • •I run mint 22.1 and have a 9070xt.
I used mainline to install kernel 6.14, works flawlessly.
Nanook
in reply to absGeekNZ • •