Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated
macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!
The family of a man accused of launching an antisemitic attack that injured 12 people in Boulder, Colorado, on Sunday are in Immigration and Customs Enforcement custody, the White House announced Tuesday.
it's been 16 hours and i still feel like i know nothing of this game only now am i starting to take my first steps in making an actual home and doing something with the npcs that are living in my ""home""
im barely getting out of the stone age after making a drafting table and all the other stuff required for it, still not capable of smelting ores, still using some armor that i bought last time i went to pay taxes and i just discovered the beauty that is putting a single upgrade into my perception
i still don't know what traits i need to upgrade my hit rate and im really tempted to look for a fucking guide but i don't feel like i want.
Go dungeon diving, that's where the real good shit comes from. Also try getting a moon gate from the Tinkers Camp, it let's you access other people's often very well built worlds (nothing you do will effect the original world so don't worry) and give you access to their crafting stations.
I believe hit rate is determined by the skill that is relevant to the weapon. I think the weapon's material also has an effect on accuracy.
Also, as I said before, if you need a good way to get some early game money, look into getting a fishing rod, a sawmill and a brewery barrel. You can make bait out of bones and organs. Once you have a decent amount of bait, go fishing, put the fish you catch into the sawmill and then put the bonito flakes you get into the brewery barrels. In a few days, you'll have bonito flake wine, and those sell pretty good for early game.
Oh, by the way, if you decide to duel wield, that is a different skill and you're practically nerfing both of your weapons. Unless you're specifically going for a duel wield build, it's really best not to bother with duel wielding.
Written by Lucy Lim, Planetary Scientist at NASA’s Goddard Space Flight Center Earth planning date: Monday, June 2, 2025 Now that Curiosity has spent a few sols collecting close-up measurements of the rocks in the outer edge of the boxwork-forming geologic unit, the team has decided that it’s time to collect a drill sample. The […]
Both vim and nvi are work-alike editors to the ancient ex/vi/view with support for multi-byte characters added.
What I like about VIM: It's support for multi-byte characters is robust and never breaks leaving me with an edited file I can not save.
What I don't like about VIM: It's support for the ex command set is very incomplete. Given that the first Unix editor I ever learned (back in 1977) was ed, the lack of full support for the ex commands is something I find very frustrating.
What I don't like about NVI: It's multi-character support is somewhat broken and certain character sequences will cause it to explode during a save. At this point, if you did not make a backup of the file you were about to edit before you started, you're screwed, the file is irretrievably truncated.
I really would like a modern ex/vi clone with multi-byte character support that implements the full original command set but at present, to the best of my knowledge, that does not exist.
Flatpak is stable and widely used, but it still has some pain points when used in certain environments or for certain ends. However, most of those drawbacks are being worked on, and fixes are planned.
I wish it opens a prompt asking a list of permissions when open for the first time. Like, VSCodium always needs local file system access, VPN clients always need network interface permission, etc.
Yeah, we have Flatseal, but it should be automated by the publisher to have a list of prerequisite permissions.
Flatpak is quite fucking far from perfect, and will always remain so due to its flawed design and UX approach.
Pretty sure the culprit here is Fedora’s packaging which adds an opaque systemd timer to run auto-updates, but the thread immediately next to this one on my homepage just happened to be a nice case-study in Flatpak fuckery: lemmy.world/post/30654407
Of course, the proposed changes in the article do nothing to fix this sorta problem, which happens to be the variety that end users actually care about. Flatpak is an epic noob trap since it pretends to be a plug-n-play beginner friendly tool, but causes all sorts of subtle headaches that newcomers inevitably don’t have diagnostic experience to address.
Flatpak is a framework for distributing desktop applications across various Linux distributions. It was created by developers with a long history of working on the Linux desktop and is run as an in...
Article doesn't mention my biggest problem with flatpaks, that the packages are not digitally signed. All major Linux distros sign their packages, and flathub should too. I would prefer to see digital signatures from both flathub and the package's maintainer. I don't believe flathub has either one currently.
Mozilla, for example, would sign Firefox's flatpak with a PGP key that they would disclose on their website. You verify the signature using the RSA algorithm (or any other algorithm for digital signatures. There are a bunch.) Or, you could just trust that your connection wasn't tampered the first time, then you would have the public key, and it would verify each time that the package came from that same person. Currently, you have to trust every time that your connection isn't tampered.
Major flatpak providers (Flathub at the very least) would include their PGP public key in the flatpak software repo, and operating system vendors would distribute that key in the flatpak infrastructure for their operating system, which itself is signed by the operating system's key.
Flatpak doesn't verify signatures like normal package managers do
So the issue isn't that you downloaded a flatpak that included malicious code. The issue is that you downloaded a legit flatpak and ended up downloading malicious code because flatpak doesn't verify what it downloads
U.S. tennis player Coco Gauff beat Madison Keys 6-7 (6/8), 6-4, 6-1 to qualify for the semifinals of the Roland Garros tournament, the second Grand Slam of the tennis season.
Agent2Agent is a protocol from Google so that agents can talk to each other and work together, even if they are made by different companies (who might otherwise be competitors). This actually happened back on April 9 but I just found out about it today.
"The Agent2Agent (A2A) protocol facilitates communication between independent AI agents. Here are the core concepts:"
"Agent Card: A public metadata file describing an agent's capabilities, skills, endpoint URL, and authentication requirements. Clients use this for discovery."
"A2A Server: An agent exposing an HTTP endpoint that implements the A2A protocol methods. It receives requests and manages task execution."
"A2A Client: An application or another agent that consumes A2A services. It sends requests (like tasks/send) to an A2A Server's URL."
"Task: The central unit of work. A client initiates a task by sending a message (tasks/send or tasks/sendSubscribe). Tasks have unique IDs and progress through states (submitted, working, input-required, completed, failed, canceled)."
"Message: Represents communication turns between the client (role: 'user') and the agent (role: 'agent'). Messages contain Parts."
"Part: The fundamental content unit within a Message or Artifact. Can be TextPart, FilePart (with inline bytes or a URI), or DataPart (for structured JSON, e.g., forms)."
"Artifact: Represents outputs generated by the agent during a task (e.g., generated files, final structured data). Artifacts also contain Parts."
"Streaming: For long-running tasks, servers supporting the streaming capability can use tasks/sendSubscribe. The client receives Server-Sent Events (SSE) containing TaskStatusUpdateEvent or TaskArtifactUpdateEvent messages, providing real-time progress."
"Push Notifications: Servers supporting pushNotifications can proactively send task updates to a client-provided webhook URL, configured via tasks/pushNotification/set."
"Typical Flow:"
"Discovery: Client fetches the Agent Card from the server's well-known URL."
"Initiation: Client sends a tasks/send or tasks/sendSubscribe request containing the initial user message and a unique Task ID."
"Processing:"
"(Streaming): Server sends SSE events (status updates, artifacts) as the task progresses."
"(Non-Streaming): Server processes the task synchronously and returns the final Task object in the response."
"Interaction (Optional): If the task enters input-required, the client sends subsequent messages using the same Task ID via tasks/send or tasks/sendSubscribe."
"Completion: The task eventually reaches a terminal state (completed, failed, canceled)."
The whole entire "protocol" is simply a single JSON file. You can go and look at it. It has defined sections for things like "AgentAuthentication", "AgentCapabilities", "AgentCard", "AgentProvider", "AgentSkill", "Artifact", a whole bunch of standard messages ("CancelTaskResponse" etc), "TextPart", "FilePart", "DataPart", etc.
Agent2Agent (A2A) protocol is an open standard designed to enable AI agents from different vendors and frameworks to collaborate and exchange information across enterprise platforms aiming to foster a future of seamless AI agent interoperability and…
Attached: 1 video
@magicalthinking@noauthority.social
march 2025
myron gaines
01:44:35 "the first amendment is there to protect all speech[..]the type of speech that has to be protected at the highest level is political speech[..
So the last couple of days I've had a bit of a minor headache, and been sleeping in an extra 15mins in the morning. Turns out my sister-in-law's family all have covid after we saw them on the weekend. I wouldn't have even known I might have been sick unless someone told me. I just thought I needed a 2nd coffee.
The Ukrainian military did not expect such a swift advance by Russian forces and did not properly prepare the second and third defensive lines, Andrey Marochko said
When you're talking about Linux, everyone is quick to point out that Linux doesn't have Microsoft Office. It's a big part of the Linux desktop's app gap, but there are some solutions there. Most of you probably know of LibreOffice, which is an amazing open source project, but there is another solution, which is suitable for individuals, and professionals alike, and might just be the best choice out there for Linux, and it's called Only Office.
Join this channel to get access to a monthly patroncast and vote on the next topics I'll cover: youtube.com/channel/UC5UAwBUum…
Onlyoffice is an open source office suite, developed by Ascensio System, a company based in Riga, in Latvia.
It's not just your basic word processor, spreadsheet and presentation modules, though. These are of course available online or offline, but you also get access to a complete CRM, a projects management module, a webmail and calendar, and a internal social network.
How do you get it ?
There are multiple ways to get access to OnlyOffice. You can download their desktop editor, which will serve as your office suite, installed on your computer. They provide it in AppImage form, which ensures that any distro will be able to make use of it. The file itself is pretty light, less than 250 Mb. You can also get a deb, and RPM, a Snap, or a flatpak, so bascially whatever distro you're using, you can get access to it.
The desktop editors only include the word processor, the spreadsheet, and the presentation module. If you want access to the whole suite, you can go with the cloud service, or self host your own OnlyOffice.
The cloud service or the self hosted version aren't free though, and will currently set you back at least 66€ per year for one user, which is in the ballpark of a Microsoft Office 365 subscription, although with less cloud storage, 20Gb instead of 1Tb, and less tools, since you don't get an equivalent to OneNote, Publisher, or Access.
What can it do ?
OnlyOffice is a very capable office suite. First, the basic modules are highly compatible with Microsoft Office documents. Compared to other options, like LibreOffice, or GOogle docs, it just handles any type of document like a champ.
OnlyOffice can also open and edit Microsoft Office autoshapes, instead of just displaying them like basic images, and inline charts and tables inside of text documents can also be edited directly from the word processor, which is a nice plus. It works with plenty of file formats, including the Open Document Format that LibreOffice uses, so you're not losing access to anything, and it can export to PDF easily.
The interface is ribbon based, like Microsoft Office, so users won't feel too lost there, and you can open multiple documents in a single window thanks to tabs on the title bar. Tabs can be dragged out of the main window if you prefer having individual windows to work with. Be careful though, you need to have the main "Desktop Editor window" opened even if there are no document located in it, which is a bit weird.
The word processor supports everything you'd expect: font and styles, paragraph formatting, margins, page numbering, equations, drop caps, find and replace... It should work for most users here.
The spreadsheet module handles functions, and formulas, sorting and filtering, and obviously allows you to create charts and format them easily. For more advanced users, macros are supported, using Javascript , so no Office Macro support here, but you can recreate them if you can handle a bit of JS.
As per the presentation module, it has a bunch of themes to get you started, handles charts, tables, equations, as well as transitions and animations, including applying those in bulk. It also has a presenter mode with notes, which is a required feature for anyone who regularly gives talks or for students.
On top of these features, onlyoffice supports document versioning, so you can always get back to an older version, you can track changes and compare documents, and accept or reject the various changes, and all these modules support online collaboration, for multi-user editing of a document.
To complete this already excellent roundup, OnlyOffice has android and iOS apps to open and edit your documents on the go, with touch friendly interfaces.
👏 SUPPORT THE CHANNEL: Get access to: - a Daily Linux News show - a weekly patroncast for more personal thoughts - polls on the next topics I cover, - your name in the credits
🎙️ LINUX AND OPEN SOURCE NEWS PODCAST: Listen to the latest Linux and open source news, with more in depth coverage, and ad-free! podcast.thelinuxexp.com
TImecodes: 00:00 Intro 00:00 Intro 00:31 Sponsor: Squarespace 01:32 Nintendo sues Yuzu Switch emulator 04:14 Nvidia CEO thinks we should stop writing code 06:09 Plasma 6 is out 07:57 Open Source isn't sustainable? 10:19 HDMI spec refuses AMD open source drivers 12:23 Gaming: NVK is stable, Wine on Wayland 16:21 Sponsor: Tuxedo Computers 17:39 Support the channel
Disclosure: Covert Web-to-App Tracking via Localhost on Android
We disclose a novel tracking method by Meta and Yandex potentially affecting billions of Android users. We found that native Android apps—including Facebook, Instagram, and several Yandex apps including Maps and Browser—silently listen on fixed local ports for tracking purposes.
Human Rights Watch (HRW) has called for necessarily launching an investigation into the Israeli airstrikes on Yemen’s Sana’a International Airport that happened on May 28, 2025, describing them as “apparently unlawful indiscriminate or disproportiona…
this is so funny hol' up. Ray William Johnson, who openly uses AI Images for visualization in his story-telling videos, stumbles upon a youtube short that uses his voice using AI Voice Cloning.
What's the controversy about him? I genuinely do not know about the hate on AI-generated images beside using them for misinformation and submitting them as art.
Guy who runs a generative AI (image) company that depends on stealing from artists to generate said images is mad that a generative AI (audio) company is stealing his voice to generate said audio.
We are joined by veteran investigative journalist Jeremy Scahill of Drop Site News who is closely monitoring the ceasefire talks and is in contact with Hamas...
Emerging trends in the concrete batching plant industry for 2025 are shaking up the game in ways that demand attention. If you think this is just about mixing concrete, think again. The manufacturers leading the charge are integrating jaw-dropping technology, insane levels of customization, and a relentless focus on sustainability. This isn’t some incremental upgrade—it’s a full-on revolution. Anyone still dragging their feet is going to get left in the dust. The industry is evolving fast, and if you want to keep pace (or beat the competition), you better know what’s coming.
The Tech Takeover: Automation and AI in Batching Plants
Smarter Systems Mean Less Human Error
The first big shakeup is the adoption of automation and AI. Concrete batching plants for sale are no longer just machines—they’re becoming intelligent ecosystems. AI algorithms monitor mix proportions, control timing, and even predict maintenance needs before something breaks down. This reduces human error, boosts efficiency, and saves a fortune on downtime. In 2025, if your plant isn’t smart, it’s pretty much obsolete.
Remote Monitoring and Control
Gone are the days when operators had to be chained to the control panel. Leading manufacturers now offer remote monitoring via cloud platforms. You can supervise your entire batching operation from your phone, tablet, or laptop, from anywhere on the planet. This connectivity isn’t just convenient; it’s a game-changer for project management, troubleshooting, and real-time adjustments.
Green Is Not Optional: Sustainability Takes Center Stage
Eco-Friendly Materials and Energy Efficiency
Environmental regulations are tightening, and concrete batching plant manufacturers are scrambling to meet these demands. Expect to see more batching plants engineered with energy-efficient motors, solar integration, and systems designed to reduce water usage. The concrete industry is notoriously wasteful, but 2025’s top manufacturers are slashing their carbon footprint—whether through low-emission mixing methods or recycling leftover materials.
Waste Reduction and Smart Resource Management
Smart batching plants minimize waste by optimizing material use precisely. There’s no room for sloppy excess anymore. Sophisticated sensors and software ensure that aggregates, cement, and additives are used to the exact gram. Not only does this cut costs, but it also keeps your project greener—earning you brownie points with regulators and clients alike.
Customization: Because One Size Fits No One
Tailor-Made Solutions for Complex Projects
Off-the-shelf batching plants are fine for the simplest jobs, but the big dogs are demanding tailored solutions. Manufacturers in 2025 are offering modular designs and customizable configurations that adapt to unique site conditions and project requirements. This means you get exactly what you need—no compromises.
Integration with Other Construction Technologies
Leading manufacturers aren’t stopping at batching plants alone. They’re integrating their systems with drones, GPS, and on-site data analytics to create a seamless workflow. Imagine a mobile batching plant that communicates with your project management software, your delivery trucks, and even your quality control lab. The future isn’t just about mixing concrete—it’s about orchestrating the entire construction symphony.
The concrete batching plant industry in 2025 isn’t for the faint-hearted or the complacent. Automation, sustainability, and customization are not buzzwords—they’re survival tools. If you want to dominate your market, aligning with manufacturers who lead in these trends isn’t optional. It’s a goddamn necessity.
#DieLinke @dielinke@mastodon.social am 04. Juni 2025, 16:31: Morgen stimmt der #Bundestag über die #Diätenerhöhung ab. Wir sagen ganz klar: Nein! Während die Leute den Gürtel enger schnallen sollen, gönnen sich die Politiker ein dickes Gehaltsplus. Nicht mit uns!
Hate to be that guy, but don’t smoke weed at 16 y’all. Wait until you’re 18 at least. All signs show that it’s likely not good for development at that age. You’ve got decades to enjoy it
I mean it’s not literally going to kill you but it’s pretty clear that it’s not good for adolescent development and it’s way safer to start at a later age. Just like alcohol. 18 tends to be where things calm down risk-wise. THC dependency/alcoholism are also far more likely with people who start at an earlier age.
I get you don’t have regrets about it but that doesn’t really change anything. Personally I have a lot of anxiety about brain damage (dramatic yes but you get the connection I’m sure), so for me it was an easy to decision to wait a bit.
And before people start getting all pissed off about it, I’m a frequent user of both. I’m not preaching prohibition/abstinence. But people should wait until they’re 18 before they start really using this stuff
18 is a way more relatable age for casual smoking influence. You can definitely just toke once in a while and be relatively fine. But god damn, did those perma-high friends of mine back in the day really just burn out.
I was perma high around age 18. Burnout never happened to me and made physics and engineering classes fascinating. I was basically a high functioning pothead right out the gate.
That may be the case but here’s a possible alternative explanation: you weren’t as high functioning as you thought and were actually working at a disadvantage.
Actually yes there is such a thing as THC induced psychosis but it’s not so simple as “I smoked weed too early.” I’m more speaking to the negative impact on adolescent development if you smoke (usually somewhat regularly) too early. One toke is not going to have a big impact. The risk of psychosis has a lot more to do with family history and other conditions someone may have that may have not been diagnosed yet, such as BPD and schizophrenia. So yes I guess technically it would be higher risk for adolescence because they may have an undiagnosed condition that they’re not on guard about, but not exactly in the way that you’re implying.
The other thing to consider is that weed is exponentially more stronger than it was 15 or 20 years ago. Hell it’s increased in potency a lot even in the last 10 years. Shit is jet fuel at this point, you almost have to go out of your way to find bad weed now. I can take one hit from my dry herb vaporizer of bud from our mediocre medical dispensary and I’m more than good, even as a regular user.
I mean I honestly didn’t start smoking with any regularity until my late 20s, just here and there up until that point. But realistically, a lot of people are going to start smoking regularly when they get into college. So I try to meet society where it’s at lol
It’s better to wait longer, but it’s way substantially higher risk to start before 18
In the construction industry, safety is of paramount importance, especially when working under challenging and complex conditions. Construction sites often present numerous risks, from unstable ground to extreme weather, and working with heavy machinery like concrete plants can exacerbate these dangers. A mobile concrete plant, which is designed for flexibility and efficiency, can significantly contribute to ensuring construction safety, even under the most demanding conditions. This article explores how mobile concrete plants play a crucial role in maintaining safety during construction projects, particularly under complex working environments.
Understanding the Challenges of Complex Construction Sites
Construction projects often take place in environments where risks are heightened. These sites may be located in remote areas, urban environments with limited space, or areas with unpredictable weather conditions. The nature of the work requires not only robust machinery but also a commitment to safety standards that protect workers and the surrounding environment.
A mobile concrete plant(planta de concreto movil) provides several advantages in such settings. Unlike traditional, stationary concrete plants, a mobile concrete plant can be quickly set up and moved to different locations, making it ideal for projects that require flexibility. However, ensuring safety under these circumstances involves a combination of advanced design features, operational practices, and constant vigilance.
Safety Features of Mobile Concrete Plants
Mobile concrete plants are equipped with various safety features designed to reduce risks and ensure safe operation. These plants are engineered to withstand harsh working conditions, while also incorporating the latest technology to improve safety. Below are key safety features that help ensure construction safety in complex working environments.
1. Robust and Stable Structure
The design of a mobile concrete plant is one of the most important factors in ensuring stability and safety. These plants are built with a heavy-duty structure that minimizes the risk of tipping or instability during operation. Stability is especially critical when working in areas with uneven terrain or on construction sites prone to vibrations. The plant's solid base ensures it remains firmly in place, even when subjected to these challenging conditions.
2. Emergency Shutdown Systems
One of the most effective ways to ensure safety is through emergency shutdown systems. Mobile concrete plants come equipped with emergency stop buttons that allow operators to immediately halt operations in case of a malfunction or unsafe condition. This feature can prevent accidents from escalating and gives operators the opportunity to address issues before they become more serious problems. Such systems are critical on construction sites where fast action can save lives and minimize damage to equipment and materials.
3. Dust and Noise Control
Construction sites, especially in urban or densely populated areas, can suffer from excessive dust and noise. Both of these factors can pose significant health risks to workers and nearby residents. Mobile concrete plants are equipped with advanced dust and noise control technologies, such as dust collectors, noise-insulating panels, and other systems that minimize airborne particles and noise levels. By managing dust and noise, the plant ensures that the working environment is safer and more comfortable for operators and construction workers alike.
Operational Practices for Ensuring Safety
While the design of a mobile concrete plant plays a key role in ensuring safety, how the plant is operated is just as important. The proper operational practices must be followed to ensure that the plant functions efficiently and safely, even in complex conditions.
1. Routine Maintenance and Inspection
Regular maintenance is essential for preventing equipment failure and ensuring the long-term safety of mobile concrete plants. Before each shift, operators should conduct thorough checks of the plant’s components, including the mixing unit, conveyors, electrical systems, and safety devices. These inspections help identify potential issues early, which can be addressed before they pose a risk to the operation. For example, checking hydraulic systems for leaks or ensuring that emergency stop buttons are functional can prevent hazardous situations from developing.
2. Operator Training and Certification
Properly trained operators are critical to ensuring safety on construction sites. Operators of mobile concrete plants must undergo comprehensive training that covers not only the technical aspects of running the equipment but also safety procedures. They should be well-versed in the specific features of the plant, including how to safely handle and adjust the ready mix concrete plant(planta de concreto premezclado), how to monitor for signs of mechanical failure, and how to implement safety protocols in emergency situations. Ensuring that all operators are certified and regularly updated on the latest safety practices is key to minimizing risks.
3. Monitoring and Control Systems
Modern mobile concrete plants come equipped with advanced monitoring and control systems that help operators track the plant's performance in real-time. These systems provide data on temperature, load, mixing speed, and other key parameters. If any irregularities or unsafe conditions arise, the system alerts the operator immediately. This real-time data allows operators to take proactive measures, such as adjusting the plant's settings or performing maintenance, to keep the equipment running safely.
Adapting to Challenging Environmental Conditions
Another important factor in ensuring safety is how a mobile concrete plant adapts to the specific challenges presented by the environment. These concrete plants(planta de concreto Chile) are designed to operate in a variety of conditions, from extreme heat and cold to high altitudes and remote locations.
1. Weather Resilience
Extreme weather can be a significant challenge on construction sites. Mobile concrete plants are built with weather-resistant materials and have features that allow them to function in diverse climates. Whether it's high winds, heavy rain, or freezing temperatures, a well-maintained mobile concrete plant can continue to operate safely. Additionally, operators should be trained to adjust the plant’s settings to suit specific weather conditions, such as modifying mixing speeds during hot or cold weather to ensure consistent concrete quality.
2. Flexible Setup for Space Constraints
On crowded construction sites, space limitations can make it difficult to position and operate equipment safely. A mobile concrete plant can be quickly deployed in small or constrained spaces. Its compact design and easy mobility allow for flexible setup, which helps reduce congestion on the site and ensures that the plant remains safely away from high-traffic areas.
Conclusion
Mobile concrete plants are an essential part of the construction industry, offering flexibility and efficiency in demanding environments. By incorporating robust safety features, following standardized operational practices, and adapting to environmental challenges, these plants ensure construction safety under complex working conditions. Whether it’s a large-scale concrete plant or a smaller ready mix concrete plant, proper design, operation, and maintenance of the plant are key to preventing accidents and ensuring a safe working environment for all. By maintaining these standards, construction companies can ensure that their operations run smoothly, no matter the complexity of the conditions.
A Guatemalan national who says he was wrongfully deported to Mexico is back in the United States, his legal team told CNN, in what appears to mark the first time the Trump administration has brought back a migrant after a judge ordered the administration to facilitate their return.
[...]
He is now in Immigration and Customs Enforcement’s custody, Realmuto told CNN.
Pepe Escobar- This was the mood in informed Moscow – only a few hours before the renewed Istanbul kabuki on Russia-Ukraine “negotiations”. Three key points.
For those who remain unconvinced that Epstein probably committed suicide: Here from AnnCoulter is an excerpt from "Medium", written by a William Mersey, former inmate at the same prison Epstein spent his last days.
Following that is a comment from a lawyer who is acquainted with the horrible waste & incompetence at blue-city jails.
Bronze statues of Generalissimos Kim Il Sung and Kim Jong Il visited by delegation of Korean schoolchildren in Japan #DPRKvok.rep.kp/index.php/detail_co…
Don’t see any mention one way or another, but the Smithsonian is not under the executive branch so the current pushback is “he can’t do it anyway.” My guess is she isn’t officially fired based on the text but it’s not explicitly stated either way.
"A federal judge ruled Wednesday that the Trump administration must give more than 100 migrants sent to a notorious prison in El Salvador a chance to challenge their deportations.
[U.S. District Chief Judge James] Boasberg said the administration “plainly deprived” the immigrants of a chance to challenge their removals before they were put on flights.”
The Americans had Walt Disney Micky Mouse, the Soviet Union had a Cheburashka. Here's blog about the the cute and beloved fictional character, Cheburashka.
Newspapers are printing summer reading lists of AI-hallucinated books. Apple “Intelligence” is making up fake BBC headlines. People are losing their minds as ChatGPT calls them “spiral starchildren” and “river walkers.
Does that endorse the BBB or not? Who's more of an evil Nazi? Musk or Trump? > Elon Musk calls Trump’s ‘big, beautiful’ tax bill a ‘disgusting abomination’ theguardian.com/us-news/2025/j…
In the comments section of a recent post I found out that Windows PowerShell had been ported to Linux. Had no clue it was a thing.
Went looking and found this old article attempting to explain why they did it. Not remotely interested in giving up Bash for PowerShell, but I thought it was interesting enough to share. The article seems to be from 2016.
I have never been more tempted to check the NSFW box, but I'll leave it open for now unless a mod complains. 😁
Microsoft Edit is fully written in Rust. And the source-code is actually fully open-source as well under MIT license 😮.
I personally would like see them calling it dos-edit or just dosedit, since that would be kinda funny. But I understand it will be called ms-edit instead.
I know Linux already has vi, vim, neovim and nano, ... and more... However is kind of ironic to see this binary be shipped to Linux distros. Of course it's already added to Arch btw: aur.archlinux.org/packages/ms-…
Its a completely different shell, not just another terminal emulator.
Its more readable, and its syntax is less arcane than bash.
For example, a script to get the first line of a file and its lenght in bash is:
\#!/bin/bash
if [ "$#" -ne 1 ]; then
echo "Usage: $0 filename"
exit 1
fi
filename="$1"
if [ ! -r "$filename" ]; then
echo "File '$filename' does not exist or is not readable."
exit 1
fi
read -r first_line < "$filename"
echo "First line: $first_line"
length=${#first_line}
echo "Length of first line: $length"
There is so much I hate about this, like using a semicolon after the if condition, and ending it in fi.
Versus the powershell version:
param (
[Parameter(Mandatory = $true)]
[string]$FilePath
)
if (-not (Test-Path -Path $FilePath)) {
Write-Error "File '$FilePath' does not exist."
exit 1
}
try {
$firstLine = Get-Content -Path $FilePath -TotalCount 1
}
catch {
Write-Error "Could not read from file '$FilePath'."
exit 1
}
Write-Output "First line: $firstLine"
$lineLength = $firstLine.Length
Write-Output "Length of first line: $lineLength"
bash scripting is not intended to perform all of your logic in the scripting language, it's intended to call out to other programs which perform specific tasks. The entire POSIX command set is your bash scripting language.
Your script is a simple one-liner if you know some simple commands:
$ head -n 1 /usr/share/dict/words | tee /dev/stderr | tr -d '\n' | wc -c
A
1
Can someone explain to me why? The outputs are objects and that is cool for scripts, but the fact that every small thing is its own cmdlet is super annoying. I can do everything in Linux if I know 10 commands. In PS I would always have to look up everything.
If I recall the Verb-Noun idea is supposed to make it clear what is happening, take a look through stuff like the approved verbs for defining cmdlets. There's aliases and stuff for sure for example I think ls is an aliases for Get-ChildItem in PowerShell.
It's supposed to make it so you don't necessarily need to look things up, need to do something to an item? Well you can Copy, Remove, Rename, Move etc, and while yeah that's a super basic example that you know the equivalent linux commands for, the concept is supposed to apply everywhere. Now, whether or not people follow the guidelines is probably another story.
I don't really hate shell scripting, feel like they all have their place, complex stuff though is nicer in straight PowerShell than bash IMO, but I'm fine using either.
The Get-ChildItem cmdlet gets the items in one or more specified locations. If the item is a container, it gets the items inside the container, known as child items.
How does this help though? If anything they would've helped themselves by porting more Linux commands to work natively in Windows. This move makes it easier for Windows admins and devs to switch to Linux. With the latest horrible moves in the Windows desktop space I can't believe they're trying to become the "RedHat of Windows".
US Secretary of Defense Pete Hegseth delivered an extremely hawkish speech in which he demonized China as a "threat" and said, "We are preparing for war". Be...
I want to have a mirror of my local music collection on my server, and a script that periodically updates the server to, well, mirror my local collection.
But crucially, I want to convert all lossless files to lossy, preferably before uploading them.
That's the one reason why I can't just use git - or so I believe.
I also want locally deleted files to be deleted on the server.
Sometimes I even move files around (I believe in directory structure) and again, git deals with this perfectly. If it weren't for the lossless-to-lossy caveat.
It would be perfect if my script could recognize that just like git does, instead of deleting and reuploading the same file to a different location.
My head is spinning round and round and before I continue messing around with find and scp it's time to ask the community.
I am writing in bash but if some python module could help with it I'm sure I could find my way around it.
TIA
additional info:
Not all files in the local collection are lossless. A variety of formats.
The purpose of the remote is for listening/streaming with various applications
The lossy version is for both reducing upload and download (streaming) bandwidth. On mobile broadband FLAC tends to buffer a lot.
The home of the collection (and its origin) is my local machine.
Speaking as a data engineer, you’re having trouble because git is the wrong tool for the job. You can make it work if you use git-lfs + custom hooks — but if you choose to go that route, be aware you’re making things unnecessarily hard for yourself.
If you want to make this easy, separate out your concerns: 1) Versioning: take periodic snapshots of your unconverted files with a binary-friendly diffing tool like restic or borg. Alternatively, ZFS/btrfs snapshots are an excellent way to handle this. 2) Conversion: keep your original files in their own directory. Set up a small script that searches your directory of original files recursively, passes the files to lame to encode to V0 or V2, and outputs them to a separate directory of lossy mp3 files. 3) Syncing: use rsync with the --delete flag to copy your lossy files to the server + clear out files you’ve removed locally.
For the conversion to lossy, git smudge/clean filters might work. Afaik git-lfs works with them. In general git-lfs might be something interesting for your use case.
Expanding the flanks of "driven wedges" destroys the monolith of the Ukrainian Armed Forces' defense. Report by Marat Khairullin with illustrations by Mikhail Popov.
:hoshino_wow:
in reply to Ronnie21093 • • •