Welcome to Friendica.Eskimo.Com

Home of Censorship Free Hosting

 Eskimo North Linux Shells, E-mail, Virtual Machines, Web Hosting.

E-mail, Web Hosting, Linux Shell Accounts terminal or full remote desktops.

Sign Up For A Free Trial Here

Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!

lemmy - Link to source

Anyone use a voice/mic modulator they can recommend?

I hope it's the right term. I'm primarily looking for live pitch-shifting for funsies. Even a little delay in the output is alright for me.

I spent a while futsing around with wireplumber gui/pipewire to get Lyrebird to work to no effect. I tried routing my mic audio through Lyrebird and sometimes through sox, and then forwarded their audio to obs, but - no effects got applied. Sounded like my regular mic sound. I did make sure to activate pipewire to manage the audio instead of just pulseaudio.

Hoping for a recommendation before I spend another evening experimenting.

lemmy - Link to source

Linux server hangs on shutdown

I've had two server oses here: alma linux and debian(currently). On both of them, they will hang when I shut them down from cockpit, and they hang at the end of the shutdown.

Also, it takes an hour to a day to have this issue start. if it's restarted two times in a row quickly, it works perfectly fine for some reason.

What I've tried:

  • setting "acpi=off" and "acpi=force" kernel parameters in grub
  • removing my nvidia gpu(i was using nouveau drivers)
  • changing distros

nothing worked. here are some things that both distros had in common with eachother:

  • systemd
  • cockpit
  • libvirt & qemu
  • docker

does anyone have advice? nothing i've seen online has worked. thank you for suggestions

in reply to potentiallynotfelix

lemmy - Link to source

AnEilifintChorcra

I don't have an Nvidia GPU so I don't have any experience with it but a quick search brought me to Nvidias website and the instructions seem to line up with users answers on other forums.

Disable it here docs.nvidia.com/ai-enterprise/… or apparently installing Nvidias proprietary drivers automatically blacklists Nouveau.

Disable Nouveau — NVIDIA AI Enterprise: VMware Deployment Guide

docs.nvidia.com

friendica - Link to source

Dear #profileActing #rolePlay #communityAccount's.

This is a reshare of a recent advise by the administration of this instance for this profile.

Considerating the content of it, we'd like to call the attention to all of you to consider with more dedication the contribution you decide to publish in the respective profiles.
None of us is interested in losing this space.
As it is ever more difficult to really know the extent of the community, please reshare this post if you are part of those who have access to the profiles so we get a better idea about what is going on.
thx

♲ TupambAdminOrg [2024.03] - 2025-01-31 13:44:44 GMT

👩‍⚖️ @jesuiSatire …ᘛ⁐̤ᕐᐷ,
can you please stop with your #rolePlay #profileActing stunts in places like this @Friendica Support forum on a distant instance?It's hard enough to work things out. Just consider this forum a working environment where there is no place for foolish children having fun disturbing the precious minds of hard working freestyling unpaid coders so you can do your recreational #contentCreation stuff.

Even tho it might seem reasonable to point out that it can have unexpected consequences and lead to people feeling offended by the naming of the profile @EDIT | don't follow! @utopiArte, please ignore #whiteHatTroll's like @jesuisatire, and have him at bay, other wise this administration might have a look into the conditions of your profile contract, consider further restrictions, temporary suspension or even en entire freezing of it's activities.

@all, sry .. kidd's you know.
🤷‍♀️

anonymiss reshared this.

lemmy - Link to source

Missing project?

Why is there no fediverse project forma online sales (like eBay)?

I get that involving payment adds a layer of complexity, bit it shouldn't be that hard? And with the rising rates of older platforms it feels like a missed opportunity

don't like this

in reply to ByroTriz

lemmy - Link to source

m_f

Are you maybe looking for flohmarkt?

The name flohmarkt is a german word and translates to flea market or garage sale in english. This is a symbol for each flohmarkt being meant to be a small place for a somehow connected group of people. All the flohmarkts willing to federate make up one big place for small advertisements about exchange of goods and services.

flohmarkt

federated decentral classified ad software using activitypub
Codeberg.org
This entry was edited (1 week ago)

lemmy - Link to source

Linux Mint a PITA to install on Win 11

I have a Windows 11 laptop and recently gotten excited to try Linux. I read good things about Mint being pretty good to go out of the box, and while I can be a fast learner I'm also tired and don't have a tremendous amount of bandwidth.

So I followed all the installation instructions, verified, flashed a USB, booted into it and started to install a dual boot of it. Made it through installation until it told me my computer had BitLocker on, and I'd need to go turn it off and try again. Fair enough.

Went back into my Windows OS (after booting it went to "diagnosing your PC"). I don't seem to have bitlocker installed - looks like a Pro version thing which I don't have. It did show that encryption was enabled, so I turned it off.

Restarted to boot to USB. Nope, "mmx64.efi - Not Found" error.

OK, googled it, renamed it, let's go.

error: shim_lock protocol not found
error: you need to load kernel first

OK... I googled it just enough to see this is going to be a pain.

I tried remaking my USB just in case, didn't help. It's extra frustrating because my first attempt to boot into Linux went so well! How did it go from booting into it flawlessly to giving me a series of errors?

Did I anger the Microsoft gods and now they're blocking my path? Is this a bad omen that Linux is going to be a problem on my laptop in general?

lemmy - Link to source

This new game Jump Ship looks interesting

Didn't hear about this game until today, but it looks really cool! Full game's not out yet but there's a demo up which I plan to try out with some friends when they're available.

According to some reports on ProtonDB it works great on Linux too, which is good news for me.

What's your first impressions?


Jump Ship Demo on Steam

Jump Ship is a mission based co-op PvE for up to 4 players, where you are the crew of a spaceship. Transition seamlessly from crewing the ship to on-foot exploration and space walks.
store.steampowered.com
This entry was edited (1 week ago)

lemmy - Link to source

Season 2 Episode 1: FediForum Commentary
We’re covering FediForum this week, and talk about what’s going on in the space, ActivityPub and AT Proto, the controversy that made FediForum postpone, and some predictions for what this week’s unconference entails.

Season 2 Episode 1: FediForum Commentary

After a long break, we're back to provide a pre-event commentary for FediForum 2025, which starts tomorrow! Sean and Damon were excited to launch the new season, and provide some insight on the FediFo
Sean Tilley (We Distribute)
This entry was edited (1 week ago)
in reply to LandedGentry

lemmy - Link to source

mic_check_one_two

And some of us even didn’t like it, because those places could often blur the lines between a place of business and a place for socializing


To be clear, this was always the goal. If an employer could have you work 80 hours a week and sleep under your desk, they would. The goal is to give employees things to do around the office, so they don’t feel the need to actually leave work. Because if you’re playing ping pong in the break room, you’re immediately available for your manager to go “hey, we have a project for you.” Even if you’re not clocked in while playing ping pong, you’re essentially on call.

lemmy - Link to source

Now that PewDiePie is on his Linux/engineering arc, could he help boost the Fediverse?

Pewds has been dabbling more in Linux and engineering content lately, and considering he's essentially retired and doesn’t rely on YouTube ad revenue anymore, wouldn’t it be amazing if he also started posting his videos on PeerTube in parallel?

He can definitely afford to support decentralized platforms and wouldn’t be held back by monetization concerns. With his reach, even just mirroring his content to PeerTube could bring massive attention to the Fediverse. Do you think he'd ever consider it?

lemmy - Link to source

TIL: Up to 85% of Americans Believe Abortion Should Be Legal in At Least Some Circumstances Despite What Politicians Say

Up to 85% of Americans Believe Abortion Should Be Legal in At Least Some Circumstances Despite What Politicians Say

In state capitols across America, politicians routinely stand at podiums declaring they represent “the will of the people” while simultaneously enacting policies that directly contradict what most…
HR NEWS (Medium)

lemmy - Link to source

Full disk encryption - Hibernation and unlocking

Hey magical linux-oracle,

I recently made a full disk encryption on my computer via the debian installer.

I partitioned it like this:

SSD:

-- unencrypted part --

Boot - 1GB space, Mounting point: /boot

EFI - 512MB space, Mounting point: ESP, bootable flag: on

-- encrypted part --
Encrypted container with a volume group (vg-1) containing 3 logical volumes:
Root - 50GB space, Mounting point: /
Swap - 30GB space, Mounting point: swap
Home - Rest of space, Mounting point: /home

  • Second harddrive fully encrypted with one logical volume and mounting point /mnt/data

The install of linux worked pretty well.

Unfortunately, the hibernation part doesn't work out of the box. When I press hibernate (or standby), it only goes to the lock screen. How can I solve that issue? (Is it even a good idea to use hibernation on encrypted devices?)

Second thing: As you can see from my setup, I use 2 disks. When I start up my system, I only need to enter my decryption password once (not twice for the 2nd HD) and I see, that my second hard disk seems to be mounted already. It seems that people usually struggle with typing in their passwords twice and want a solution for that. Is it possible, that debian automatically fixed this for me (It's the same pw for both)?

Thanks!

~sp3ctre

This entry was edited (1 week ago)
in reply to sp3ctre

lemmy - Link to source

dbkblk

You have to use two swaps if you already use one swap, because one will be used when the system is on, but the second will be used to set the RAM content + the 1st content into SWAP (if any), otherwise, it would fail.

Then, find the hibernation swap uuid:

sudo swapon --show
lsblk -o name,uuid

Then
# /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="resume=UUID=xxxx"

\#/etc/initramfs-tools/conf.d/resume
resume=UUID=xxxx

# bash
sudo update-grub
sudo update-initramfs -k all -u

# to hibernate on lid switch
# /etc/systemd/logind.conf
HandleLidSwitch=hibernate

Then reboot 😀
This entry was edited (1 week ago)
in reply to sp3ctre

lemmy - Link to source

Avid Amoeba

You can do encrypted swap as well. If you use the same passphrase you can install decrypt_keyctl and use it as described here. It will cache the passphrase and send it to every other LUKS volume that needs decrypting so you have to type it only once. This is what I'm currently using and my root is on ZFS on LUKS.

Another option which I haven't used is to have a small volume that only stores your LUKS keys as files, then your LUKS volumes reference those files as keys, then you decrypt only that volume with a passphrase upon boot.

Another option is to use a swap file. I used to run Ubuntu LTS on LUKS on LVM. That is disk > EFI and LVM partitions > LVM volume boot, LVM volume for LUKS > root filesystem inside LUKS > swapfile in that root filesystem. Upon boot, GRUB is able to read the Linux kernel straight from the boot volume on LVM. Boots the kernel. You get a prompt to decrypt the LUKS volume where the root filesystem is. Once decrypted, the kernel can access the swapfile if it needs to resume from it.

This entry was edited (1 week ago)
in reply to sp3ctre

lemmy - Link to source

gnuhaut

I have this working on Debian like how you have it set up, everything on an encrypted lvm volume, except for boot and efi. Just one disk though. When waking up, it asks for the password like it does during normal bootup. It then restores RAM from the encrypted swap after you type the password. I think it worked out of the box, but it has been a while, so not 100% sure if I had to enable this somehow. Anyway this looks good to me.

If you manually run systemctl hibernate, does that work? Assuming this also does not work, you need to look at the logs during the failed hibernate attempt. Probably something like sudo journalctl -f and/or sudo dmesg -wH (for kernel logs). Open this up in two terminals, run systemctl hibernate and observe any errors or warnings.

It's possible this is a hardware/driver issue, i.e. a driver prevents hibernation or fails at it. You may be able to figure out which driver/device is responsible by looking at the logs.

This entry was edited (1 week ago)

lemmy - Link to source

[Mostly solved?] audio distortion from hdmi on graphics card

OK, I'm on Debian Trixie with Gnome and just got a new (used) geforce 1050ti graphics card. I installed the proprietary drivers, and everything was working fine (after wrangling wine issues) until I turned on the sound. Playing something simple from a single audio source would work OK. But if another program started playing something, or if I pause/played quickly, then the audio would get all distorted and echo-y.

So far, the only way I can get the audio to be stable is the following:

  1. in gnome settings, set the audio output to HDMI/displayport
  2. install easyeffects
  3. under output/players, enable the PipeWire ALSA [fluidsynth] playback
  4. under PipeWire/General, uncheck the "Use default output", and change the output to "Built-in Analog Stereo" (which in my case isn't hooked up with anything)

Alternatively, I can changev the Gnome settings to the "Built-in Analog", and then in easyeffects, I can exclude the pipewire ALSA, and enable whatever programs I want to hear. The problem with this method is the Gnome volume control then doesn't work.

I'm mainly posting in hopes this gets indexed and helps some other wayward linux weirdo in the future. But I'm also curious if yall have any suggestions for a more permanent fix. Remove ALSA? In the default configuration, it definitely seems like there's some feedback or doubling or interference going on with pipewire and/or ALSA.

But linux audio is still black magic to me. I don't even know if ALSA or pipewire is a lower level. It's one of those situations where I half-solve a problem I couldn't find by googling, and just want to put it out in the ether

in reply to doubtingtammy

lemmy - Link to source

Joe

ALSA is lowest level, and is the kernel interface to audio hardware. Pipewire provides a userspace service to share limited hardware.

Try setting "export PIPEWIRE_LATENCY=2048/48000" before running an audio producing application (from the same shell).

Distortion can sometimes be related to the audio buffers not getting filled in time, so increasing the buffering as above gives it more time to even out. You can try 1024 instead of 2048 too.

There is no doubt a way to set it globally, if it helps.

Good luck!

This entry was edited (1 week ago)
in reply to Kwdg

lemmy - Link to source

Vik

I can appreciate that people use their systems very differently, but this is something that gnomes designers did not care to acknowledge throughout that whole exchange; input directly from their end users, and that's bearing in mind they collect no telemetry.

I appreciate working in UX for a community driven project is no easy task, many of the people commenting in the thread linked above could be considered more advanced users with their own desktop shortcuts configured, and a one size fits all approach satisfying all is difficult to deliver. All they asked for was an option for this new behaviour.

The communication in that thread was so poor that matt miller got involved.


GNOME 40 login is to the activities/overview mode, how do you disable this?

By default (at least in Fedora Rawhide) GNOME 40 fires up the activities/overview mode (not sure what the correct term for it is) when you login from the greeter.
GNOME Discourse
This entry was edited (1 week ago)

lemmy - Link to source

Liberux Nexx GNU/Linux smartphone starts crowdfunding!

Original Text by: @AprilShowers@lemmy.blahaj.zone

The Liberux Nexx smartphone will be (if it makes it to the production stage) the most powerful smartphone (with the RK3588S) to run GNU/Linux and the mainline kernel. More powerful than the PinePhone Pro, or the OnePlus 6. It will have a decent OLED display, alot of RAM, and much of what you would expect from a privacy-focused GNU/Linux smartphone such as hardware killswitches.

That is to say, this phone will (hopefully if it releases) be a true daily-driver candidate for many people, more so than the current offerings are now. While I am skeptical of it (as I am with any crowdfunded project) I think this will be a great thing if it does make it to production.

Site: liberux.net/

Crowdfunding Link: indiegogo.com/projects/liberux…


Liberux NEXX

THE LINUX PHONE YOU’VE BEEN WAITING FOR. | Check out 'Liberux NEXX' on Indiegogo.
Indiegogo

lemmy - Link to source

My week with Linux: I'm dumping Windows for Ubuntu to see how it goes
There are more than a billion PCs in use and, according to StatCounter, only 71 percent of them run Windows. Among the rest, about 4 percent run Linux. That's tens of millions of people with Ubuntu, Mint, Debian, etc as their desktop operating system. I envy them.

Windows 11 has become more annoying lately as it shoves ads for XBox Game Pass in my face, pushes AI features no one asked for and demands that I reconsider the choices I made during installation on a regular basis. Plus, it just isn't that attractive.

I'm ready to try joining that industrious four percent and installing Linux on my computers to use as my main OS, at least for a week. I'll blog about the experience here.

It's hard to give up Windows forever because so many applications only run in Microsoft's OS. For example, the peripheral software that runs with many keyboards and mice isn't available for Linux. Lots of games will not run under Linux. So I think it's likely I'll be using Windows again, at least some of the time, after this week is through.

However, for now, I'm going to give Linux a very serious audition and document the experience.

https://www.tomshardware.com/news/live/my-week-with-linux

lemmy - Link to source

Trump administration returns Guatemalan migrant hastily deported to Mexico back to the US
A Guatemalan national who says he was wrongfully deported to Mexico is back in the United States, his legal team told CNN, in what appears to mark the first time the Trump administration has brought back a migrant after a judge ordered the administration to facilitate their return.


[...]

He is now in Immigration and Customs Enforcement’s custody, Realmuto told CNN.

lemmy - Link to source

Why Microsoft open sourced PowerShell and ported it to Linux

In the comments section of a recent post I found out that Windows PowerShell had been ported to Linux. Had no clue it was a thing.

Went looking and found this old article attempting to explain why they did it. Not remotely interested in giving up Bash for PowerShell, but I thought it was interesting enough to share. The article seems to be from 2016.

I have never been more tempted to check the NSFW box, but I'll leave it open for now unless a mod complains. 😁

Why Microsoft open sourced PowerShell and ported it to Linux

You can already test PowerShell in Ubuntu, Debian and CentOSrn
CIO

melroy

2025-05-28 22:16:15

mbin - Link to source

Microsoft Edit is coming to Linux


The brand new Microsoft Edit, which is the successor of the old MS-DOS-editor will come soon to Linux as well?

There is a discussion going on how to call ms edit executable under Linux at: github.com/microsoft/edit/disc…

Microsoft Edit is fully written in Rust. And the source-code is actually fully open-source as well under MIT license 😮.

I personally would like see them calling it dos-edit or just dosedit, since that would be kinda funny. But I understand it will be called ms-edit instead.

I know Linux already has vi, vim, neovim and nano, ... and more... However is kind of ironic to see this binary be shipped to Linux distros. Of course it's already added to Arch btw: aur.archlinux.org/packages/ms-…

Official GitHub page.

The logo of MS-edit

GitHub - microsoft/edit: We all edit.

We all edit. Contribute to microsoft/edit development by creating an account on GitHub.
GitHub

in reply to enemenemu

lemmy - Link to source

BrianTheeBiscuiteer

How does this help though? If anything they would've helped themselves by porting more Linux commands to work natively in Windows. This move makes it easier for Windows admins and devs to switch to Linux. With the latest horrible moves in the Windows desktop space I can't believe they're trying to become the "RedHat of Windows".
This entry was edited (2 weeks ago)

lemmy - Link to source

Trying to recreate a version control system for my music collection, with one crucial difference ... 🤯

I want to have a mirror of my local music collection on my server, and a script that periodically
updates the server to, well, mirror my local collection.

But crucially, I want to convert
all lossless files to lossy, preferably before uploading them.

That's the one reason why I can't just use git - or so I believe.

I also want locally deleted files to be deleted on the server.

Sometimes I even move files around (I believe in directory structure) and again,
git deals with this perfectly. If it weren't for the lossless-to-lossy caveat.

It would be perfect if my script could recognize that just like git does, instead of deleting and reuploading the
same file to a different location.

My head is spinning round and round and before I continue messing around with find
and scp it's time to ask the community.

I am writing in bash but if some python module could help with it I'm sure I could
find my way around it.

TIA

additional info:

  • Not all files in the local collection are lossless. A variety of formats.
  • The purpose of the remote is for listening/streaming with various applications
  • The lossy version is for both reducing upload and download (streaming) bandwidth. On mobile broadband FLAC tends to buffer a lot.
  • The home of the collection (and its origin) is my local machine.
  • The local machine cannot act as a server
This entry was edited (2 weeks ago)

lemmy - Link to source

Looking for the Best KDE Distro – Fast, Stable, and Feature-Rich

Hey folks,

I’ve been using Linux on and off for over a year now—not a total newbie, but still learning. I know the basics and usually rely on GPT or forums when I hit a wall. I’ve tried a bunch of distros so far: Kali, Debian, Pop!_OS, KDE Neon, Kubuntu… and currently running Fedora KDE.

Fedora is solid, but I keep finding myself tempted to try something new. Maybe I get bored easily—or maybe I just haven’t found the one yet. That’s why I’m asking for your help.

Here’s what I’m really looking for:

🔹 Large and fast app repository – I want access to a wide range of apps, updated quickly, without weird dependency issues.

🔹 Great UI/UX – KDE is my current favorite. I love how modern and smooth it feels, and I want something that builds on that experience.

🔹 Stability without being outdated – I don’t mind rolling release if it’s reliable. Crashes and breakages are a dealbreaker.

🔹 Good extras – Whether it’s unique tools, deep customization options, or just thoughtful polish, I love a distro with a “complete” feel.

🔹 Active community/support – Docs, forums, or anything that helps when things go wrong.

I’d love your suggestions—especially if you’ve been in the same place: bouncing between distros, loving KDE, and still chasing that “perfect” setup.

What would you recommend and why? Any underrated KDE-based distro I should check out? Or maybe something mainstream but deeply customizable and stable?

Appreciate your thoughts!

Also, if you can, please share some of the best (and free) resources to really learn and master Linux.
I’m still learning and only know some basics, but I want to go deeper and really understand how things work under the hood. Even if I don’t feel super advanced yet 😅, I’m curious and willing to grow.

Thanks a ton in advance!

in reply to NotUrHoney

lemmy - Link to source

kshade

You could try Tuxedo OS. It's stable Ubuntu minus Snap plus newer KDE packages by a small Linux system retailer. Been using it for about a year now on my work laptop and it's perfectly adequate.

TUXEDO OS - TUXEDO Computers

TUXEDO OS: TUXEDO OS Modified Linux kernel Optimized for TUXEDO-Hardware Simple by default Powerful when needed Linux-qualified customer support Powered by KDE Plasma "Making Linux accessible to the general public" - this is our mission at TUXEDO ...
www.tuxedocomputers.com
This entry was edited (1 week ago)

lemmy - Link to source

Is there a quick way to know which instance might need mods?

As per title.
I've been wondering about this. How can we help when someone managing a community/instance can't find help locally, for whatever reason? Something like an "help wanted" board. Even if it's for one month, three months, etc.

I've been an admin for a 8-9k+ users Discord server for years, but I love Lemmy so much I'd like to see if I can be somehow useful here. I don't think I'm power tripping at all, but have zero tolerance for harassment, racism or sexism, bigotry and honestly want to keep neocons and bigots/trolls out of Lemmy as long as it's humanly possible. Whenever in doubt, I generally abstain from using any moderation power and talk with other mods/users to find the best course of action.

The situation I imagined in the first paragraph did happen to me. Managing the server alone was draining my mental health, and I couldn't find anyone to help with all I had to do. Then someone wrote to me, we had lengthy discussions about the rules and philosophy of the server and we've been co-managing it together for years. Lemm.ee closing down made me think about "how to help where and when it's needed"?

I'm posting in this community in hope that other users may be wondering about it and may find any answer useful.

[Multiple edits, original post written quite late, judging from most replies, I failed to phrase correctly what I had in mind]

This entry was edited (1 week ago)

don't like this

in reply to Cadenza

piefed - Link to source

tuckerm

I'm wondering if the fediverse in general (but especially Lemmy) would benefit from some kind of "fediverse help wanted" board for moderators, donations, technical help, etc.

edit: People who run a Lemmy/Mbin/Piefed/etc instance might be hanging out in the Matrix chat room for the software they are running; that might already serve this purpose.

This entry was edited (1 week ago)

lemmy - Link to source

PSA: Exporting and importing your Lemmy account settings will also include your saved posts and comments
This entry was edited (1 week ago)

BootLoop doesn't like this.

lemmy - Link to source

Lemmy.zip Turns One!

Hey all,

Today, 10th June 2024, marks Lemmy.zip's first birthday.

Back on the 10th June 2023, I was as disillusioned with Reddit as many others here were, and wanted somewhere I could go where mods and users weren't treated like an end product.

At the time I had been messing with a lot of home server stuff (think Jellyfin and the *arr suite - usenet is great 😉) and figured I could spin up a docker container or two, how hard could it be right?

I'd never even heard of ansible, never changed an nginx config file, hell I'd never had more than one other person use something I'd spun up before. But after a couple of hours, there it was - Lemmy.zip. And suddenly, people were actually joining, posting, and making content. It felt unreal.

Since then, and with an awful lot of help and support from Sami and the community, I feel like we've got a really good, solid, stable and active Lemmy instance, our own corner of the internet where we can't be abused for corporate greed. In this first year, I have spent an awful lot of time learning how to run a so-called "social media" site, how to protect the backend, and how to build a bot to do all the boring stuff.

Linked in this post is a very brief overview of the last year - yearone.lemmy.zip - which gives some detail on how things unfolded at the start.

I am insanely thankful for all the lemmy.zip users, even the ones who only visited briefly. You're all brilliant (yes, even the lurkers 😘 ) and I hope you all continue to enjoy Lemmy.zip for many more years.

Running your own Lemmy server has its ups and downs. Days like today, when I can debug various issues without stressing, push new code to ZippyBot like its second nature, and have the ability to celebrate massive milestones like this, make all the bad times worth it.

I remember about a month or two in to the sites operation, and we'd just upgraded to the latest lemmy version - there was a period of about 5 or 6 hours continuous downtime and nothing I tried was getting the site working again. I was sat with my head in my hands, completely out of ideas, ready to give up. But thanks to the guidance of some fantastic people in the wider Lemmy community, eventually the site came back to life. Many mistakes have been made (many server backups have been restored 🙃) but we've continued to learn and grow, and I think the site is all the better for it.

We've got over 2,500 signed up users, we've recently tipped over 500 active users a month, we're in the top 20 lemmy instances - and in reality, that's all thanks to the mods and users of lemmy.zip. Without you, there wouldn't be any point to the site!

(Interesting fact - our longest serving user is Firestorm Druid - I don't have any medals yet sorry, but you deserve one!)

Looking forward to the next 12 months, I'm hoping we can continue to grow and continue to be a Lemmy instance for everyone. With the increasing enshittification of Reddit (and the wider "traditional" social media sites), I hope many people can escape and make their way over here. The Lemmy of today is a much different place to what it was 12 months ago. Even from purely a technical standpoint, federation is infinitely more reliable, and there are many long-standing servers to choose from now.

So once again I say a massive thank you to everyone. To the mods, you're the backbone of creating content across the whole lemmy network. Its often a thankless job, but here's hoping this goes a little way to expressing the gratitude we all have for you.

To everyone that has donated - I'm still humbled by your generosity. Thank you, you keep the lights on and the bits flowing.

And to the users of Lemmy.zip - thank you for being here. You make this whole thing worthwhile 😀

Happy Birthday Lemmy.zip 🍻

Demigodrick
❤️

Lemmy.zip Year One!

yearone.lemmy.zip

lemmy - Link to source

Attempt 2 at Lemmy 0.19.11 upgrade! (April 12, 13:00 BST)

Hello all,

Attempt two to update to Lemmy 0.19.11 is now planned in for tomorrow, April 12th at 13:00 BST (that's 12:00 UTC!)

Following feedback from the downtime thread, information can be found on the upgrade in these places:

  • Matrix - We have a Matrix space you can join by clicking here. This is likely where I'll be most active during the update.
  • Status Page - Following the failure of our old status page to actually detect any downtime, I've swapped to a different status page supplier temporarily while I review the options. Uptime Kuma was great (and free, and self hosted) but let us down. Our status page has now been updated, and I've included the maintenance on there. If there are any unforseen issues, I will add them there.
  • Mastodon - I have a mastodon account which you can view by clicking here and I will make a couple of posts here as and when things are happening too. You can get a mastodon.zip account too by clicking here!

There will absolutely be downtime again, but I cannot predict how long this will be. Some sources say 8 to 10 minutes, but during our last attempt the migrations took significantly longer, so it may be a few hours its down for.

Obviously there will be a backup, and if anything does go wrong again then we'll roll back.

Fingers crossed this time 😀

Thanks

Demigodrick


Mastodon

@Demigodrick invites you to join this server of Mastodon! With an account, you will be able to follow people, post updates and exchange messages with users from any Mastodon server and more!
Mastodon hosted on mastodon.zip
This entry was edited (2 months ago)

lemmy - Link to source

Scheduled Maintenance Wednesday 9th April 18:00 UTC (19:00 BST, 14:00 EDT)

Probably a two hour window to give me time to get things done. There may be an upgrade to lemmy 0.19.11 however that requires some modification of ZippyBot due to changes in the new version.

There will be downtime while the server is restarted, however hopefully this is brief.

Thanks

Demigodrick

lemmy - Link to source

The "Thank You" Thread

Here is a thread to celebrate those who support Lemmy.zip to keep the (virtual) lights on and the data flowing!

If you'd like to donate and get your name on this list, head over to OpenCollective and select one of the options.

There is absolutely no pressure to donate though. Anything you can give is spent on keeping Lemmy.zip going.

Lemmy.zip Donators (Past or Present)



Lemmy.zip Supporters



Lemmy.zip Friends



Lemmy.zip Heroes


Thank you again to everyone who is (or has been) supporting Lemmy.zip.

Perks!


Donators get some special perks - including the ability to choose custom emojis for everyone to use, and to get their own me.lemmy.zip profile - just like this one.

In the future, we're looking at other ways to reward those who donate. If there is something you'd like to see as a reward, let the admin team know.

If you'd like to stay anonymous please email me at hello@lemmy.zip or send me a message on here 😀


Lemmy.zip - Open Collective

A Lemmy instance for everyone and anyone.
opencollective.com
This entry was edited (4 weeks ago)

lemmy - Link to source

Lemmy.zip Server Update June 2025

Hello all!

Firstly, apologies I missed last month's update. As I will go in to during this month's update, the train has not been smooth sailing, the ship missed the station - for a little while, trying to uncover what has gone wrong has been like unraveling a can of worms that has gone off the tracks.

Because of the length of this update, I'm leaving off new communities for this month, but feel free to pop any in the comments you'd like to share!

Server Updates


So, I'll begin at the 0.19.11 update for Lemmy. I'd planned in some time for the update, and to begin with things went fairly normally, with usual server updates etc. Then it came time to update Lemmy itself to 0.19.11 - however, instead of the ~10 minutes of suggested downtime, it quickly became apparent that something wasn't quite right. The logs gave no indication of anything happening, and after an hour it became apparent that something hadn't worked. With not much to go on, and all the various logs showing that absolutely nothing had apparently happened, I cancelled the upgrade process and tweaked the logs so I'd get a bit more information than the standard logs usually show. This turned out to be an internal DNS issue, where Lemmy wasn't talking to the database.

So, onwards again I fixed that issue and reapplied the update, to which it had appeared to start working. Excitedly, I give it ten minutes as advised, to come back and see that it was still going.. and going.. and going.. and two hours later it was saying something was still happening. Well, by this point I'd run out of time and trusted in the process that it would resolve itself. I had unfortunately had to go to sleep as I had work the next morning, and a baby to look after.

By the next morning, still nothing. However, I can't SSH in to the server on my phone (nor would I ever want to in case it was stolen etc) and all the backend stuff is behind layers of protection, so the site was down for the day while I had to do real world work nonsense.

By the time I'd got home, it still thought it was ongoing, so I made the decision that likely something was broken and cancelled the update. Of course, letting something go to town for hours on the database meant it was probably ruined, or would require completely investigating - ain't nobody got time for that. So I crossed my fingers and hoped my backup solution had worked which it did with flying colours. I restored the database and the site came back to life.

Of course, I don't like running old versions, so I rescheduled which went much much smoother the second time around, taking 8 minutes. Whew.

For a few days, everything looked great. Metrics looked spot on and the site was running like it always was, and then bam - the server completely locked up:

A restart did eventually fix this, and things returned to normal, but not quite the same.

On the 24th April, I started getting reports of the site returning various 502 and 504 errors, and also issues with images loading. Broken images has been a feature of the image proxy for a while, but this was on another scale, with sometimes whole pages of broken images and a connection timeout on every refresh. I was, in hindsight, very out of my depth here.

I started trying to see what the cause of the timeouts where, and it became apparent quickly that the site was being hit by previously-unseen levels of traffic:

On the above graph, the left hand side was the usual amount of traffic we'd get, and on the right was the new levels we were receiving. This was likely causing the server to effectively be DDOS'd, and uncovering issues with the performance of the server. For a comparison of the usual amount of traffic we get, here's a graph from the last server update:

Many configs were tweaked. Much database performance monitoring took place. Things were turned off and back on indiscriminately. Unfortunately not much worked.

It was at this point our new Admin, Gazby, joined the team - and quickly got to work diagnosing and fixing so many of the issues.

Some of the changes include much better backups, reduced latency in image storage (the images moved from the USA to EU storage), images being served from i.lemmy.zip to allow for better caching to reduce the load on the server, complete review and tweak of all the configs and server setup, and a detailed list of things we need to work on going forwards (plus no doubt lots of things I am forgetting).

This has really helped to stabilize the site, and while we can see it's not 100% perfect, the amount of 502/504 errors should have massively reduced, and the site should be almost as it used to be.

One of things Gazby has also worked on is reporting and insights into the server, and so for example here's a graph showing the 504 errors today:

We've got some plans on the horizon we're working on which should increase the performance of the site, which possibly/probably will include a server move to rule out hardware issues or latent config issues we can't find.

Whatever triggered these issues I am still not sure - it looks like it could be scrapers/AI bots hammering the site, and so we've put some measures in place here. If you use the old front end then you may have noticed a cloudflare challenge to try and prevent the server being overloaded - also a prewarning, the old front end is no longer maintained, and unless someone steps in, it is not compatible with the next version of Lemmy. Therefore at that point it will be retired unless someone works on it to bring it back in line. It is also the cause of a LOT of the server traffic problems, so it probably isn't too much of a bad thing. Maybe someone will rewrite it to be better 😀

As it stands, things still aren't perfect - we had an issue where the bit of the server that actually directs you to the right place got overwhelmed, and so we put a fix in for that, but they are hopefully a lot better than they were a couple of months ago.

Donations


Lemmy.zip only continues to exist because of the generous donations of its users. The operating cost of Lemmy.zip is over 60 euros a month ($60, £50) and is mostly funded by the community!

We keep all the details around donations on our OpenCollective page, with full transparency around income and expenditure.

If you're enjoying Lemmy.zip, please check out the OpenCollective page, we have a selection of one-off or recurring donation options. All funds go directly to hosting the site and keeping the virtual lights on.

We've also put up a link to our Ko-Fi page where you can donate via paypal instead of using a card. All Ko-Fi donations will be totalled up and added to OpenCollective each month for transparency. I've added a link in the sidebar, but you can also click the image below to go there:

We continue to have some really kind and generous donators and I can't express my thanks enough.
You can see all the kind donators in the Thank You thread - you could get your name in there too!

Please remember, traditional social media is only "free" to you because they sell your data. We don't do that - if you want to support independent social websites like this one and you value your privacy, please consider a small donation. It really does help.

Graphs


I know you've come for the shiny pictures, so here you go!

CPU over last 30 days:

RAM over last 30 days:

Disk space used:

Here's a few new ones for you! Lemmy DB size:

Images database size:

Here's our current actual images stored:

Here's the cloudflare overview:

Here's requests:

Bandwidth:

And here is visitors:

And finally, traffic by country (mostly federation traffic remember!)

So hopefully that fills everyone in on where we're up to, and what we're working on, but if you have any questions please ask away below!

One final thing - on the 10th June, Lemmy.zip turns two years old!! 🥳 🎉 I'm hoping to do something nice for it, similar to last years (which is here if you haven't seen it!) - but a quick thank you to everyone who has been part of the ride so far!

Thanks

Demigodrick

Lemmy.zip - Open Collective

A Lemmy instance for everyone and anyone.
opencollective.com

Demigodrick

2025-04-10 16:19:45

lemmy - Link to source

Downtime - Apologies and what went wrong


Hi All,

As some of you may have realised, the planned upgrade sort of crashed everything, and we had our longest period of downtime since the site began.

This is partly because I had to go to sleep (thanks to a newborn and a job).

The good news is that the backup process worked! We've restored to seconds before the upgrade took the site offline.

The bad news is that federation is likely to be.. wonky.. for a little while. The site may also go up and down while I undo some of the fixes I tried.

Ultimately the issue came down to the upgrade failing (I am not sure why - will be digging into this now the priority is no longer getting the site up) and then the containers not talking to eachother, so the UI wouldn't talk to lemmy, and lemmy wouldn't talk to the database.

I rebuilt the containers, restored the backup, restarted everything, and it's all come back up (admittedly not perfect right now).

Importantly, I want to issue an apology. This isn't what I want for Lemmy.zip, and it should've been handled way better by myself. I'm always learning but this took way longer than it should've, and while I take some solace in the fact the backup process worked and has been proven to work in production, the delay in being able to get this back up is entirely my fault and frankly unacceptable.

I'll be working to document this outage, the steps it took to get it back up, and some form of repeatable plan so a repair can be replicated in the future if I'm not available.

In terms of upgrading to 0.19.11 - I will have to try again soon as it's got some security fixes we desperately need to implement.

Thanks

Demigodrick


This entry was edited (1 week ago)

lemmy - Link to source

Welcome to Lemmy.zip

Hello to all of our new users.

I wish we could all meet in better circumstances. The closing of lemm.ee is a real blow to the fediverse, and I have nothing but the greatest respect for the lemm.ee admin team. Lemm.ee was a cornerstone of the lemmy community, and set a high bar for moderation and technical performance.

Finding a home on the fediverse can be tough. Whether you're here to lurk, post, moderate, or contribute in your own way, we’re glad you’ve joined us. Lemmy.zip might not replace what was lost, but we hope it can become a lemmy instance where you can feel at home.

Everyone should receive a welcome PM when they sign up to Lemmy.zip from the ~~ever-present dark lord overseer~~ friendly bot, ZippyBot. However, in case poor Zippy has been overworked and forgotten to send the PM to you, here's some helpful information regarding Lemmy.zip!

  • All of our policies can be found at legal.lemmy.zip. This includes our Code of Conduct. Please (please!) have a read of this. Our number 1 rule is Remember the human! (no harassment, threats, etc.). We absolutely adhere to this. Treat people with respect.
  • When you created your account, we set up some "Default Blocks". If you want a more unfiltered Lemmy experience, you can head to your account settings and remove the blocks. You can read more about this in our Welcome Post
  • We have monthly updates! You can read the latest one here!. We're always open to suggestions if there's anything else you'd like to see in these.
  • We have some metrics around federation for the curious among you. The link is in the sidebar or you can click here!
  • We have our status page at status.lemmy.zip. In the unlikely event the server becomes sentient and starts a robot uprising, full details will be available here.

Finally, your admin team is myself (Demigodrick), Sami, Druid, and Gazby. Please reach out to any of us if you feel you need help or support with anything. We also have a support email - hello@lemmy.zip.

If you have any questions, please let us know and we'll do our best to answer them.

Thanks,

The Lemmy.zip Admin Team


lemmy.zip status

Welcome to lemmy.zip status page for real-time and historical data on system performance.
status.lemmy.zip
in reply to LandedGentry

lemmy - Link to source

UnderpantsWeevil

I mean, its a war. Nobody is playing "fair" and you're delusional if you think they ever were.

But it's crazy to fixate on Russian losses and ignore the devastation rained on Ukrainian territory. Or the enormous debts Zelensky has had to assume in order to continue importing new munitions and mercenaries to fight. We've already seen bombings inside Moscow and assassination attempts (more than a few successful even) against Russian military and state security leadership. But that's not budging the front lines. Neither is it curbing the continuous barrage of artillery and Russian-based retaliatory drone attacks.

This is just the Iraq-Iran War on steroids. Two countries absolutely butchering their youth in a vainglorious attempt to claim hegemony over a minefield.

This entry was edited (1 week ago)
in reply to LandedGentry

lemmy - Link to source

UnderpantsWeevil

Ukraine is obviously the victim here. The Ukrainian people are amazing and have their own rich history and culture as well that deserves to be preserved and respected and cultivated. They do not deserve any of this.


It's weird to suggest anyone would. But we've been hearing about how "Now is the time for a Ukrainian counterattack!" since 2022. Tens of thousands of Ukrainian conscripts got shoveled into Russian defense lines and butchered by mines and artillery, while Westerners cheered like they were watching some kind of pro-sporting event.

FFS, you can find videos all over the internet of Ukrainians and Russians butchering one another and bragging about it. You can find bespoke influencer news networks bragging about how their team is "Owning" the opposition with grisly reprisals. They're trending all over social media.

Talking about one does not mean I don’t care about the other.


It's just a show for the West. You don't actually give a shit, because you don't see (or care) about the cost anyone is paying.

This entry was edited (1 week ago)

LandedGentry doesn't like this.

in reply to LandedGentry

lemmy - Link to source

UnderpantsWeevil

I am just teasing out exciting (well as exciting as war can be, which is horrific)


I wish people were more willing to confront the horror and less eager to speculate on the excitement.

Instead, we just see bloodlust. People online clutching their keyboards in rapt anticipation of the next bombing or shelling or assassination, like this isn't costing uncounted civilian lives to put points on the board.

What do you want? More solemnity? Do you want us to not cheer for Ukraine? I mean what the hell is your goal?


To get people to see this as an ongoing disaster, tragedy, and fundamental political failure, rather than some kind of CoD Twitch Stream epic playthrough.

in reply to UnderpantsWeevil

lemmy - Link to source

Initiateofthevoid

This entire post is literally about a successful counterattack on Russian soil. One with zero Ukrainian casualties.

What, exactly, do you want from this conversation? People to recognize that Ukrainians are suffering? They do recognize that - that's why they don't want Ukraine to lose.

A defeated Ukraine would suffer far worse than they are now, as retribution for defending themselves and embarassing Russia in the process. Ukrainians would inevitably be conscripted to fight in Russia's next attempt at conquest anyway.

in reply to UnderpantsWeevil

lemmy - Link to source

Initiateofthevoid

Lol what unreported casualties do you imagine there could even be? The drone operators developing carpal tunnel? If they had identified Ukrainians smuggling weapons platforms into the country, the whole operation would have failed.

And then nobody wants to talk about retaliation as a consequence.


Right, because Russia hasn't been trying until now? They haven't really tried to crush Ukraine, they've just been playing around? But now that Ukraine has bloodied their nose, boy are they sure gonna find out what Russia's capable of. Lol.

“Things will be worse once the bombs stop falling” is pure war propaganda.


No, "things will be worse when a nation is conquered by a hostile dictatorship" is not propaganda. Ukraine knows that for a fact, because they've been through this before.

Seriously, what do you even want here? What is the point of this? You want capitulation and appeasement?

This entry was edited (1 week ago)
in reply to Initiateofthevoid

lemmy - Link to source

UnderpantsWeevil

Lol


What is it with the 101st Chairborn and their need to make light of human casualties?

what unreported casualties do you imagine there could even be?


Intelligence on the ground, particularly spotters near the target, would be the most obvious potential liabilities.

But now that Ukraine has bloodied their nose


They've been bloodying one another for years on end. This isn't the first successfully Ukrainian strike since the war started.

Seriously, what do you even want here?


To quite treating this bloodbath as a fucking football game.

in reply to UnderpantsWeevil

lemmy - Link to source

Initiateofthevoid

I'm not making light of casualties, I'm making light of the baseless claim that there even could be casualties, because I reiterate:

If they had identified Ukrainians smuggling weapons platforms into the country, the whole operation would have failed.


You think if they found spotters deep in Russian territory near their nuclear bombers the operation would have succeeded?

So, you're not gonna defend the claim that we should worry about retaliation? Going to pretend that Russia will do anything it wasn't already trying to do, and just move the conversation elsewhere? This is so incredibly bad faith.

To quite treating this bloodbath as a fucking football game.


Congratulations, it's not working. You just sound like a cheerleader yourself.

This entry was edited (1 week ago)
in reply to UnderpantsWeevil

lemmy - Link to source

FelixCress

This is just the Iraq-Iran War on steroids. Two countries absolutely butchering their youth in a vainglorious attempt to claim hegemony over a minefield.


What are you even talking about?

There are no "two countries butchering". There is no symmetry.

There is a bandit state which invaded their neighbour (like many other neighbours they invaded before) and are murdering civilians, commiting war crimes and kidnapping children.

This entry was edited (1 week ago)
in reply to LandedGentry

lemmy - Link to source

UnderpantsWeevil

Zelenskyy is “forcing” Ukraine to defend itself


Conscription Is Breaking Ukraine

In Ukraine today, no topic is more barbed than that of compulsory military service. Few want to talk about conscription publicly; men within service age range, 25 to 60 years old, are particularly reticent. “It’s just too sensitive. I hope you understand me,” one man told me, referring to the many families in his circle of friends whose sons, brothers, and fathers are on the front or have perished there. Some fear that speaking out might prompt a letter from the Defense Ministry announcing their call-up. Or worse, they might be plucked randomly by recruitment officers on the streets and, should their documentation prove their eligibility for service, sent straight to boot camp.



Military Conscription Is Breaking the Spirit of Ukraine's Mean in the Fight Against Russia

Ukraine is desperate for men on the front—but Ukrainians are increasingly desperate for a break.
Paul Hockenos (Foreign Policy)

lemmy - Link to source

Trump Announces Russia Will Strike Back at Ukraine After ‘Good Conversation’ With Putin

Trump Announces Russia Will Strike Back at Ukraine After ‘Good Conversation’ With Putin

Trump announced that Russia would "respond" to the recent Ukrainian attack on Russian airfields while reflecting on his "good conversation" with Vladimir Putin.
Isaac Schorr (Mediaite)

lemmy - Link to source

How will we deal with all the broken images?
When an instance goes down, all of the images on it go with it. there's going to be a lot from lemm.ee, especially given its size.

unconfirmedsourcesDOTgov doesn't like this.

lemmy - Link to source

FediForum starts in less than 24 hours

FediForum

FediForum: moving the Open Social Web forward
FediForum

don't like this

in reply to squirrel

lemmy - Link to source

KazuyaDarklight

Seems to be a kind of online conference. For being open source focused it's opening is very salesy/buzzword salad-ish.

"Open protocols, not closed platforms. The Fediverse, Mastodon and ActivityPub. ATmosphere, Bluesky and AtProto. Human connections, not AI bots, nor fake news nor manipulative algorithms. New funding models. New forms of governance. Better trust and safety. Direct relationships to stakeholders and customers. Interoperability across social platforms everywhere, and so much more.

After a decade of stagnation, next-generation social media is breaking out of the closed silos and connecting the world into a global, open social web. It’s a wild world full of opportunity.

FediForum brings together the leading thinkers and doers who build this new Open Social Web."

This entry was edited (1 week ago)

lemmy - Link to source

Slrpnk.net outage (resolved)

Edit: unexpectatly we are back online. Will share how we found a solution later. There might be still some federation issues though.

Alt account of poVoq@slrpnk.net here.

Our instance is currently down and I can't get remote access to the servers. It appears that there might have been a hardware failure of the main firewall, which is the one thing I can't work around remotely.

I am still trying a few things, but I am not very optimistic that I can get access.

The really unfortunate part is that just now I am on one of my rare work deployments abroad, so I also can't access it physically during the next few weeks and my usual back up that could restart it is not available either.

As something like that never happened in 3 years operating the servers, I thought I can risk it, but murphy's law seems inescapable 😓

I will try to keep you posted here on any updates, but probably there will not be much I can do for a while. Really bad timing 😥

Edit: we might use this "opportunity" to migrate the instance to Piefed, which has been an idea for quite some time now. I will keep you posted on that.

This entry was edited (2 days ago)

devAlot doesn't like this.

in reply to Kris

lemmy - Link to source

ocean

I this it’s a law that servers run 100% perfect until the literal day one leaves town with zero way to return home. One of the many reasons I got all my services off of unraid.

Very cool to learn you’re running your own machines. Do you go into detail about this anywhere?

in reply to ocean

lemmy - Link to source

Kris

We have a small write up about the hardware on our wiki, but it is also down right now.

I think we will share a post-mortem write up of the actual improvements we will do to avoid this in the future.

One thing I will definitly do is to add a KVM remote management console to one of our server boards and move the main firewall into a VM with hardware passthrough of the NICs (this was anyways planned for a 10gbit network upgrade for the second half of 2025). This way I should be able to reboot and even reinstall the main ingress point remotely, so that only the fiber gateway remains as a failure point that requires physical access.

This entry was edited (1 week ago)

don't like this

in reply to Kris

lemmy - Link to source

wit

I am a slrpnk user. Oh well, shit happens. What makes me a bit sad was that a few months (?) ago something similar happened. Slrpnk.net was down for aa day or two? Don't remember the exact amount of time. What I do remember is asking if there was intention of adding a second admin and making the point that it would be good to create that sort of redundancy. I was ignored.

Mid of july is basically 1 and a half months from now. Hopefully a new solarpunk instance emerges, one that is safer from such scenarios.

Enjoy your vacation and don't stress too much! Shit happens.

This entry was edited (5 days ago)

ElanoidesWahl doesn't like this.

lemmy - Link to source

Japan births in 2024 fell below 700,000 for first time
Tokyo (AFP) – The number of births in Japan last year fell below 700,000 for the first time on record, government data showed Wednesday.

The fast-ageing nation welcomed 686,061 newborns in 2024 -- 41,227 fewer than in 2023, the data showed. It was the lowest figure since records began in 1899.

Japan has the world's second-oldest population after tiny Monaco, according to the World Bank.

Prime Minister Shigeru Ishiba has called the situation a "quiet emergency", pledging family-friendly measures like more flexible working hours to try and reverse the trend.

Wednesday's health ministry data showed that Japan's total fertility rate -- the average number of children a woman is expected to have -- also fell to a record low of 1.15.

The ministry said Japan saw 1.6 million deaths in 2024, up 1.9 percent from a year earlier.

Ishiba has called for the revitalisation of rural regions, where shrinking elderly villages are becoming increasingly isolated.

In more than 20,000 communities in Japan, the majority of residents are aged 65 and above, according to the internal affairs ministry.

The country of 123 million people is also facing increasingly severe worker shortages as its population ages, not helped by relatively strict immigration rules.

In neighbouring South Korea, the fertility rate in 2024 was even lower than Japan's, at 0.75 -- remaining one of the world's lowest but marking a small rise from the previous year on the back of a rise in marriages.


Japan births in 2024 fell below 700,000 for first time

RFI

lemmy - Link to source

Migrating communities in the wake of the lemm.ee shutdown
I'm a happy lemm.ee user and a mod of a small community hosted there. I'm also subscribed to a bunch of communities on lemm.ee. Sadly, they have just announced that they will be shutting it down. I understand that I can open an account on another instance and subscribe to the same communities. For my own community, I can probably re-create it on my new instance and DM every subscriber. But how do I find all the communities from lemm.ee in their new places? I'd like some practical advice.

sorrybookbroke doesn't like this.

in reply to Tad Lispy

lemmy - Link to source

rglullis

The following communities have already an alternative on instances that I run:

  • !television@lemm.ee -> !television@metacritics.zone
  • !movies@lemm.ee -> !movies@metacritics.zone
  • !artporn@lemm.ee -> !artporn@sfw.community
  • !football@lemm.ee -> !football@soccer.forum
  • !keitrucks@lemm.ee -> !keitrucks@gearhead.town

All these instances have been running for close to two years and are part of the "topic-specific" network of servers that I set up to help during the migration.

This entry was edited (1 week ago)
in reply to rglullis

lemmy - Link to source

Blaze (he/him)

!Television@lemm.ee, !movies@lemm.ee and !Football@lemm.ee have pinned post where the community members can vote where they want to go.

At the moment, for !television and !movies, sopuli.xyz is the proposition with the most votes.

Edit: !artporn@lemm.ee also has a meta discussion post.

This entry was edited (1 week ago)

lemmy - Link to source

Voyager changed the default instance to lemmy.zip

cross-posted from: discuss.tchncs.de/post/3785704…

chore: set default instance to lemmy.zip, remove lemm.ee

Thank you for all your work!


Release 2.35.1 · aeharding/voyager

📝 Other Changes chore: set default instance to lemmy.zip, remove lemm.ee PR: #2034 (I'm still on vacation; this is a hotfix for lemm.ee shutting down on June 30th, 2025.)
GitHub
This entry was edited (1 week ago)

don't like this

in reply to Blaze (he/him)

lemmy - Link to source

Quicky

Bit shit for UK users though since lemmy.zip is blocked for them. Not exactly going to encourage new users from here.
in reply to gressen

lemmy - Link to source

Quicky

Realistically that is never going to happen. The biggest issue the fediverse has is onboarding. People just looking to try out a reddit alternative aren't going to bother emailing their fucking MP just because the default settings of an app won't let them sign up. They'll just give up and go elsewhere.

If we want to encourage growth, adding additional barriers isn't the way to do it.

don't like this

in reply to greybeard

lemmy - Link to source

Quicky

It’s not actually complying with UK law, it’s removing it from the equation so it doesn’t have to. I don’t begrudge the decision though, it will have been a difficult choice to make. That said, it’s a sledgehammer approach to self-censorship, as a response to an inability to comply.

Like I say, I don’t have an issue with Lemmy.zip being unavailable in the UK. But I do think it is potentially damaging for Fediverse uptake to promote a default instance that is unavailable to such a large number of users.

For comparison purposes, the UK easily has the second highest number of Reddit users by country. It is a remarkable decision to exclude that potential market by default.

This entry was edited (1 week ago)
in reply to mina86

lemmy - Link to source

𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

Unless you go in with a byte editor, you can't change Mercurial's commit history. I didn't say "fabricate", I said "change".

You can, as you say, configure your user name and email to be "Linus Torvalds" and change your computer date and fabricate whatever history you want. You might also be able to go in with a byte editor and fiddle bits and change history that way; Mercurial provides no blockchain-like cryptographic guarantees. But, unlike git, rewriting history is not supported by Mercurial; history is immutable. Rebase doesn't change history; the commit index only ever increments. Squash and rebasing create new commits, and there history of what happened is always in the repo.

There's a distinct and clear difference between Mercurial's immutable history and git's de jour history rewriting, which can literally - with the git command - change published history to make a commit made 3 years ago look like it was committed by someone else. The git workflow used by the kernel team, and the b4 tool, use this history rewriting in the standard workflow.

If you wanted to do the same thing with Mercurial, you'd have to get a byte editor and start hacking the on-disk format, and it would have to be entirely outside of any Mercurial tooling. And there is some sequential hash verification you'd have to work around, even if it's not cryptographically auditable.

The point is, with Mercurial it would be hard and the result would be utterly incompatible with any other clone of the repo: there would be no way to propagate your changes to other clones. With git, this is a standard workflow.

in reply to 𝕽𝖚𝖆𝖎𝖉𝖍𝖗𝖎𝖌𝖍

lemmy - Link to source

squaresinger

Looks like Mercurial can change the history just fine using the hg command. You just need to enable it first.

book.mercurial-scm.org/read/ch…

Git can also be configured to disable history rewrites.

stackoverflow.com/questions/20…

So the difference between git and hg really just comes down to the defaults.

Changing history — Mercurial: the definitive guide 1.90-ebb51bf94742 (for Mercurial 4.2) documentation

book.mercurial-scm.org
This entry was edited (1 week ago)
in reply to Sparrowette

lemmy - Link to source

LandedGentry

No. It's mostly due to personal/personnel matters.

But it's a reminder to folks to not bring that shit from reddit where you scream at mods and admins all the time. When you post flagrantly illegal shit it's their asses too (some instances have their own interpretations of these things, so learn them!)

These are often unfunded volunteers begging for donations to provide a service for the rest of us. Be grateful and don't add to their list of problem. Don't go on witch hunts, don't put mods and admins on blast because you don't like their rules (saw this yesterday), don't be an entitled ass. Appreciate what we have and make their lives easier. This whole project is a gift.

This entry was edited (1 week ago)
in reply to LandedGentry

lemmy - Link to source

flandish

re point a: if the rules of the instance are not followed, of course mod action is legit. that guy was a douche it seems.

i think mods of nsfw instances also deserve certain praise; modding that stuff must be … ugh. especially since the instance could be on a 486 in someone’s bedroom. having ran newsgroup servers back in “the day” - turning on anything “alt.bin” was .. not advised.

in reply to LandedGentry

lemmy - Link to source

flandish

i had content recently removed for “advocating violence” (iirc it was when i suggested criminal charges for all shareholders of corps who do violent things like allow death when choosing profit over people, yadda yadda.) No example of what the offending remark was and I could not find the old comment to manually review or correct or apologize. in this case I messaged a mod. no reply yet. was it a legit removal? probably certainly! was it poor “customer service” to not follow up with me? probably. does it make me confused as to what the line is there and therefore distrust that community? certainly.

anyway yeah. so the feedback loop could be improved. mods could be more human. and commenters could be less dicks all around! 😀

in reply to flandish

friendica (DFRN) - Link to source

Nanook

@flandish @LandedGentry I simply offered my site as a potential option for those losing access to the site going down. In response to this I get 50 some odd dislikes and two SYN floods.

Unlike the admin of the existing site, I DO have a thick skin having been in the game since well before Linux existed.

But the environment would be so much richer and better if everyone didn't act like 13 year olds on a testosterone rage.

in reply to LandedGentry

lemmy - Link to source

Corgana

Not trying to victim blame or anything, but I find it hard to believe that someone operating a low-moderation instance would truly expect people who don't like moderation to stay away.

Don't get me wrong I agree with your sentiment and dislike that behavior, but what I'm saying is that asking or expecting users not to go on witch hunts or to behave in a certain way is a fool's errand that will always lead to burnout. A more sustainable approach for admins and mods is creating space for what they want to host and not trying to control what they don't.

lemmy - Link to source

Helping choosing the right linux
Hello, I got almost for free a Lenovo laptop: CPU Intel i3 8130, 4Gb RAM. I would like to use It to learn Linux. I saw some people using Arch to learn the inside out of Linux, but I'm afraid It could be to challenging. What do you suggest? What Is the best way to learn? Thank you.
Edit: First of all I thank you all for your suggestions, I think that this is what makes this community special. I installed Fedora Xfce for now and I worked all evening to male it work and customize it. I'm learning a lot already. I'll move to Arch as soon I'll feel comfortable with Fedora. Thank you all again.
This entry was edited (1 week ago)
in reply to utnapishtim

lemmy - Link to source

Eugenia

I suggest Linux Mint. It has GUIs for almost everything and it's very stable. With a little bit of tinkering of the services at startup, you can get Mint to run at 700 MB of RAM (as read via htop), instead of its default ~1 GB of RAM. That could be important to fit it better at 4 GB of ram with some demanding browsing.

I disagree with anyone who might suggest Fedora or Ubuntu with 4 GB of RAM. These distros require about 2+ GB of RAM to boot up, double than that of Mint.

Then there are the distros meant for older machines that use less ram, but it's a shame to use these when your laptop is fast-enough with an 8th gen cpu (comparatively to very old machines, that is).

The lowest ram usage I've seen with a full-fledge distro/DE, is XFce with endeavourOS. I load it at 490 MB of RAM (it takes 630 MB on Mint for the same layout/apps).

Basically, your challenge is the RAM, not the CPU or the drive. Use an appropriate distro for the RAM and the difficulty you want, and always be mindful to not have too many tabs/apps open at the same time.

This entry was edited (1 week ago)
in reply to utnapishtim

lemmy - Link to source

Fecundpossum

I commented elsewhere about endeavourOS, but I have some other wisdom to pass along.

Keep good backups of your personal files, stuff you don’t want to lose, and don’t be afraid to try something new. You dont like something about how your system is running? Nuke it and install something else. Installing Linux is a cakewalk in most distros and rarely takes longer than half an hour (your mileage may vary with the low specs on the laptop)

I’ve learned a ton about Linux by trying many different distros, breaking things, fixing things, and occasionally distro hopping to see how I like a different offering.

There’s a lot of great content on YouTube that can help you learn, and reviews of various distros so you can get an idea of how things work without having to install it yourself. Have fun and don’t be afraid to fiddle with things.

This entry was edited (1 week ago)

lemmy - Link to source

Help me choosing a distro
I am looking for a distro with a customisable UI. I want the ability to change everything in the UI: like changing the window borders style, animated interface, creating transition animations. Something that can allow me to create UI from my favourite video games. I am even willing to learn a language if needed. Just don't suggest arch because I'm only interested in visuals. I don't want to spend time creating and troubleshooting other aspects of os. Also, if above requirements can be achieved with changing the desktop environment, please suggest that too.
I am somewhat familiar with Linux as I used it a few years ago for some time. Back then, the games' support was lacking, so I switched back. But now with steam os and proton's contribution, games shouldn't be a hassle to run.
in reply to dovahking

lemmy - Link to source

tomatoely

If you want to get into customizing UIs hard, something the likes of this

You could get started with window managers (very opiniated topic, its really up to you to decide on which you should use) and UI toolkits like
- ewww
- AGS
- QuickShell

Also I know X11 is slowly dying but AwesomeWM fits your bill really nicely.

TL,DR: You want a cool UI? look at unixporn's top posts of all time, research an option you find good enough and go bananas on everything you need to make yourself at home.

ALSO consider posting at !unixporn@lemmy.ml so we can marvel at your fine grained setup, good luck!


GitHub - elkowar/eww: ElKowars wacky widgets

ElKowars wacky widgets. Contribute to elkowar/eww development by creating an account on GitHub.
GitHub
This entry was edited (6 days ago)

lemmy - Link to source

I just migrated a community from Lemmy to Piefed using the migration feature, it worked quite well

Context:
I tried to use the Piefed migration feature to migrate !barcelona@lemm.ee to !barcelona@piefed.social

piefed.social/c/barcelona now exists, with all the existing posts there, as well as the icon and description.

It even moved some subscribers (there are around 100 now), from what I understand those were Piefed subscribers that got automatically moved.

The one caveat is that from Lemmy instances, the community doesn't have show old posts (see lemm.ee/c/barcelona@piefed.soc…), but if you were restarting a community from scratch you wouldn't have access to your old posts anyway.

This ensure that at least the posts are transferred to a community on an active instance, which is probably the main concern for lemm.ee communities at the moment.

corsicanguppy doesn't like this.

in reply to FrostyTrichs

lemmy - Link to source

Blaze (he/him)

At this moment, 9 out of the 10 most active communities are on LW: lemmyverse.net/communities?ord…

You have to scroll 3 times to see !television@lemm.ee, the first Lemm.ee community.

Lemm.ee was already a decentralization factor from LW, but it was still tiny in terms of communities compared to LW. Moving all of the Lemm.ee communities to Piefed.social (not that it's the case anyway, I've seen communities moving elsewhere) would keep the status quo that we were all living with.

Of course ideally over time more Piefed instances emerge, and we can spread a bit more. Also, thanks to the Piefed migration feature, we'll be able to move communities much smoother (even including subscribers).

Lemmy Explorer

Instance and Community Explorer for Lemmy
lemmyverse.net
This entry was edited (1 week ago)
in reply to Blaze (he/him)

lemmy - Link to source

FrostyTrichs

At this moment, 9 out of the 10 most active communities are on LW: lemmyverse.net/communities?ord…

You have to scroll 3 times to see !television@lemm.ee, the first Lemm.ee community.

Lemm.ee was already a decentralization factor from LW, but it was still tiny in terms of communities compared to LW. Moving all of the Lemm.ee communities to Piefed.social (not that it's the case anyway, I've seen communities moving elsewhere) would keep the status quo that we were all living with.

Of course ideally over time more Piefed instances emerge, and we can spread a bit more. Also, thanks to the Piefed migration feature, we'll be able to move communities much smoother (even including subscribers).


Right, I've seen pretty much that same reply already.

I think it's a chance to learn a lesson from how and why lemm.ee is shutting down. Right now I think people are risking moving the same problem somewhere else. Sure, in theory the problem gets better with time because the tools to move around are there, but that only matters if there's somewhere to move.

It would be much more encouraging to see dozens of new piefed instances being launched/advertised. I think there's a big push towards something new because it's in the right place at the right time, and I genuinely hope it's a successful project long term. I just hope the people utilizing it are willing to support it as a platform and not just as a flagship instance.

Lemmy Explorer

Instance and Community Explorer for Lemmy
lemmyverse.net
This entry was edited (1 week ago)

don't like this

lemmy - Link to source

Worst keyboard layouts?

Personally I think that azerty was meant made by drunk students trying to troll people but it somehow caught on.

  • Hey, qwerty is kinda bad... You think we could try to make one that's even worse to mock it?
  • Oooh that'd be hilarious! Let's make a French version of qwerty but a lot worse!
  • I know, lets put dead keys for all accents except for the accent aigu so that when you need it on an uppercase letter you CAN'T type it!
  • Ahah good one! Let's also not add anyway to type an uppercase cedilla! Imagine, a French keyboard that can't type uppercase é and ç !
  • And what if we rearrange all the punctuation and symbols so that the open and closed parenthesis are no longer next to each other? It'd be sooo funny!
  • Right right! Let's do it too for the brackets and curly braces too!
  • Good one! How about we don't add guillemets which are used in French instead of english double quotes, so that people will be forced to type double quotes and their advanced text editors will have to automatically replace them by guillemets so that the text uses correct punctuation for French?
  • That's so sneaky! Let's also add § so you can cite your sources with the correct paragraph symbol, but not use real quotations marks for the quotes!
  • What else would be really stupid?
  • Let's use one key for a random greek letter!
  • What?
  • You know, like α and β?
  • Ermm... okay... which one? α or β?
  • Neither, people might actually use those once every 2 years. Let's just pick one at random!
  • µ it is! Has anyone even seen that letter used in a French text?
  • Nope, never, so it's perfect!
  • How about also adding ¤?
  • What the hell is ¤?
  • I haven't the faintest clue! And neither do you or most people! That why it's funny!
  • Sure, why not, let's cram pointless characters and not add actually useful ones like guillemets! Any other ideas?
  • Let's put the hyphen on the one most unreachable key!
  • Oh that's a good one!
  • I got better! Let's put the period on the same key as the semicolon, but with the semicolon as the default character, and periods will be Shift+semicolon! That way we can say that it's canonically why French phases are long-winded: it's easier to type a comma or semicolon than a period!
  • Man you're hilarious!

When I was still on Windows I put qwerty as my keyboard layout and used the Alt+number shortcuts for accents because that was less painful than using azerty... Those shortcuts didn't work anymore when I switched to linux so I had to find a real solution, which ended up being a colemak base which I modified to add accented letters. I don't like bepo, it moves z x c v and I like them being in the same place as in qwerty for the shortcuts I'm used to, and I didn't know qwerty-fr existed at the time 😅

Do you have worse for your language?

This entry was edited (1 week ago)
in reply to phantomwise

lemmy - Link to source

troglodyte_mignon

There are several Azerty layouts. Some don’t allow you to type uppercase accented letters easily, some do. I’ve switched to Linux about fifteen years ago and never had an issue typing these characters with the default layout. It used to be more complicated on Windows, I don’t know if that’s still the case. I should give it a try the next time I get the occasion to type on a Windows computer.

I currently use the fr-oss Azerty layout, which is probably not perfect but has many advantages. I love being able to type thin spaces and non breaking spaces easily.

I still don’t get why it’s easier to type a semi-colon than a full stop, though. I love semi-colons, but even I don’t use them that much.


disposition de clavier d'ordinateur utilisé en France et en Belgique

Contributeurs aux projets Wikimedia (Fondation Wikimedia, Inc.)
This entry was edited (1 week ago)

lemmy - Link to source

My week with Linux: I'm dumping Windows for Ubuntu to see how it goes

There are more than a billion PCs in use and, according to StatCounter, only 71 percent of them run Windows. Among the rest, about 4 percent run Linux. That's tens of millions of people with Ubuntu, Mint, Debian, etc as their desktop operating system. I envy them.

Windows 11 has become more annoying lately as it shoves ads for XBox Game Pass in my face, pushes AI features no one asked for and demands that I reconsider the choices I made during installation on a regular basis. Plus, it just isn't that attractive.

I'm ready to try joining that industrious four percent and installing Linux on my computers to use as my main OS, at least for a week. I'll blog about the experience here.

It's hard to give up Windows forever because so many applications only run in Microsoft's OS. For example, the peripheral software that runs with many keyboards and mice isn't available for Linux. Lots of games will not run under Linux. So I think it's likely I'll be using Windows again, at least some of the time, after this week is through.

However, for now, I'm going to give Linux a very serious audition and document the experience.

https://www.tomshardware.com/news/live/my-week-with-linux

lemmy - Link to source

My week with Linux: I'm dumping Windows for Ubuntu to see how it goes

cross-posted from: lemmy.ml/post/31142642

There are more than a billion PCs in use and, according to StatCounter, only 71 percent of them run Windows. Among the rest, about 4 percent run Linux. That's tens of millions of people with Ubuntu, Mint, Debian, etc as their desktop operating system. I envy them.

Windows 11 has become more annoying lately as it shoves ads for XBox Game Pass in my face, pushes AI features no one asked for and demands that I reconsider the choices I made during installation on a regular basis. Plus, it just isn't that attractive.

I'm ready to try joining that industrious four percent and installing Linux on my computers to use as my main OS, at least for a week. I'll blog about the experience here.

It's hard to give up Windows forever because so many applications only run in Microsoft's OS. For example, the peripheral software that runs with many keyboards and mice isn't available for Linux. Lots of games will not run under Linux. So I think it's likely I'll be using Windows again, at least some of the time, after this week is through.

However, for now, I'm going to give Linux a very serious audition and document the experience.

lemmy - Link to source

Arch user looks for ease of mind

Whelp, here I am. Been an Arch user for over 10 years now, and to this date I love it. But something is bothering me lately. Almost two years ago I jumped ship and completely switched to Wayland (using Plasma first, then Sway). I tasted modernism with all its features and it was sweet. But those last two years were a timeframe where I had to troubleshoot quite a lot compared to before where I used XFCE which was a very stable and reliant experience.

I am at a stage in my life where I do not have the time, nor the energy anymore to troubleshoot problems on a regular basis. I am now almost afraid of installing updates, because something new could fail again.
But I cannot go back anymore. Wayland is too sweet.

So although I still love Arch, maybe it is time for me to look for something else which gives me more ease-of-mind. I am specifically looking at immutable distros now since the concept seems to be exactly what I am looking for (stable, low maintenance, up-to-date packages, easy rollback). But I am a bit lost with the options and hope that you can help me with some recommendations.

  • I mainly browse the web, watch movies, game, do some scripting and run qemu VMs
  • I am comfortable with the terminal
  • I don't do fancy customizations
  • I don't like GNOME
    Distributions that I find interesting so far:
  • Aurora
  • Bazzite
  • NixOS

I am still trying to wrap my head around what the differences between NixOS and the other two are. Afaik, with Nix you can configure your system once (including what packages you want to use), save this configuration in a file, and load it up whenever I need to set it up again. And it seems to have the same concept of updates, such that you can easily roll back if needed.
But it seems to be aimed more at professional users and that I might overshoot at what I was aiming for.
So for someone who likes to setup a system once and then just wants to use it indefinitely without too much maintenance what would your recommendation/advice/critisism regarding my situation be?

Edit: thank you guys so much for all your recommendations and thoughts!
After some further analysis I decided to install Bazzite for the following reasons:

  • shares a lot of similarities with other Atomic distros
  • but has all the nice gaming related things pre-installed and configured and it uses a properly pre-installed Steam (not the Flatpak version) (the main reason why I chose it over Aurora, which would have been my next best pick)
  • my qemu virtual machines run perfectly fine (also the shared folder)
  • some dev stuff already pre-installed (don't think I need more than there already is)
  • fast and the OS feels like made out of one block, very consistent
  • I was ready to use my machine like I want to in basically no time
  • I already love the atomic way of handling updates
  • so far no issues

The only thing left for me to do is to figure out how to properly install SyncThing and Zerotier-One, then I am absolutely set.

This entry was edited (1 week ago)
in reply to wewbull

lemmy - Link to source

phantomwise

Noooo that's a terrible idea 😭

If six months from now you decide that you do need updates, Arch won't like the accumulated six months of updates coming all at once and might throw a tantrum.

Also not updating is a bad idea in general, you do need security updates for stuff like your browser. Please don't use an out of date system. If you want, install something like debian which will give you only critical updates that won't break stuff until the next release.

lemmy - Link to source

Lemmy,Mbin, piefed, what even are those?

First of all, how is called this category of programs, instance engine?

Second, why there are 3 different, basically inter-compatible projects out there, what are the benefits of each one over the others? and why does Lemmy prevail all of them.

*i will be using feddit as a umbrella term for all the reddit-like fediverse.

I don't have much of a technical Background to know how this things work under the hood, but I'm quite curious of where all of this is heading.

I see a lot of awesome features locked away in these other projects that would be just nice if it was standard to have them, like piefed's hashtag-like system that allows people to seek things by topic instead of going to a specific community hosted in a specific instance, it would instantly fix the fragmentation problem across feddit, lol.

How the future of feddit will be? will be all be using Lemmy or other specific project, or instances will use whatever project they like and they will be cross compatible enough that it won't be much of a deal what project is running underneath?

corsicanguppy doesn't like this.

in reply to A_Chilean_Cyborg

lemmy - Link to source

DeeDan06

I don't have the time for a detailed response right now, but to keep things short: you've probably heard of the fediverse. The concept that lemmmy can talk to for example mastadon. That is done via ActivityPub. To allow seemless integration lemmy instances communicate with each other via ActivityPub. Now what would happen if someone designed a software that worked like lemmy and is capable of reading its ActivityPub communication. That is what Mbin and Piefed are. Of course, since their communication is designed to speak lemmys language, lemmy can understand them to.

As for uniqe features, just because most things are the sane doesn't mean all things. Everything is still comunicated via ActivityPub, and lemmy could, if they so desired implement them. The Beauty of the fediverse is that compatanility can be inmplemented one sided.

And finally, the reason lemmy is prevelent is because its the oldest. They are years older than the others. The downsides of lemmy are the slow development Speed and the political opinions of the devs. The upsides are that it is stable, and development, while slow, is consistent. Long term, it might end up getting dethroned by Piefed, but it is Impossible to tell now

EDIT: I so.ehow mest up the spelling of ActivityPub once, and my phones auto completion just made me repeat the mistake every single tine. Fixed it now

This entry was edited (1 week ago)
in reply to A_Chilean_Cyborg

lemmy - Link to source

Cris

Lemmy, piefed, and mbin are all similar pieces of software that run on a server.

They are each capable of hosting a small social network with a similar reddit-like format. They all also support the activitypub standard, which means that they can be linked together, so that when you go to one of those social media sites (lemmy.world for example) you can see any other site that they're "federated" with, even if that social media site is powered by a different software that supports activitypub (I'm on lemmy.world but I can see communities and posts from piefed.social)

I generally call lemmy, mbin and piefed "fediverse platforms" because they're each a platform that you can make a fediverse account on, but that usage is a bit imperfect, since each individual site could also be described as a platform, and is where your account is actually hosted. You could be more specific and call them "fediverse/federated link aggregators" if you wanted to specifically refer to the ones with a similar format to reddit.

These pieces of software are different because they're built in different ways (different languages and underlying structure), have different priorities, and as software projects are run in different ways with different leadership, all of which is how you get differences in features and implementation. Lemmy is the oldest of these similar platforms, and as such is the most established. In the open source world it's very easy and common to end up with a lot of fragmented similar projects. Its both a blessing and a curse.

There isn't perfect language for all these things because in the grand scheme of things, it's a rather new way for social media platforms to work, so the language around how to describe or refer to these things hasn't really "settled"

This entry was edited (1 week ago)

NTesla doesn't like this.

in reply to tkw8

lemmy - Link to source

hayk

whoever says pacman is enough either have all the time in the Universe to configure the miniscule knobs or have never done serious development with multi-platform/compiler deployments. controlling which compilers are used for which packages in pacman (or any other default package manager for that matter) is a headache. having multiple versions of non-conflicting gcc, llvm, cuda etc is priceless and very easy with brew.

elitism aside, brew is genuinely a good package manager when it comes to imperative ones. I still use it on my desktop arch extensively. ofc, if you have nix, there is really no good reason for it (and I'm not even sure it's possible).

PS. "but you can use docker" -- not if you want to have the same performance especially on GPUs. also have you ever tried containerizing HIP? it's a frigging nightmare.

This entry was edited (3 days ago)

lemmy - Link to source

When an instance like lemm.ee shuts down, what happens to the posts and comments?
While I understand the concept of federation I'm unclear as to what it actually entails at a technical level. When lemm.ee eventually shuts down, will all of that user content (posts, comments, votes, etc) cease to exist? Is it mirrored on other instances?

corsicanguppy doesn't like this.

in reply to artifex

lemmy - Link to source

🇰 🌀 🇱 🇦 🇳 🇦 🇰 🇮

When Yiffit shutdown, Wander archived everything. Though I am not sure how or where... But it kinda tells me that without manually doing something with it, it will probably be lost.

Then again, the other day someone had replied to a post on a community on Yiffit. Can't log in to the instance, or make new top level posts, but navigating directly to an old link still apparently works and you can reply and everything. 🤷🏻‍♂️

This entry was edited (1 week ago)
in reply to artifex

lemmy - Link to source

insomniac_lemon

For a practical test, search for kbin.social (and then ctrl+f for it also to get the direct results). Or, just look at a community: !kbinMeta@kbin.social

The only thing that appears missing is the ~~avatars~~ images. Though I assume the text content is doomed in the long-run when it comes to new instances, as I doubt re-federation (3rd-party federation) is a thing. Unless of course, someone manually crossposts said content.

This entry was edited (1 week ago)

lemmy - Link to source

Anyone noticing Firefox not letting you use the address bar in some windows?

This is a very recent thing I've had happening, presumably since an update. I will often have multiple FF windows open. In one of the windows, I'll suddenly not be able to place my cursor in the address bar on any tab. But other FF windows function fine. I have to close that window and start a new instance or drag a tab from a working window to another screen, then that will work fine for an unpredictable time.

I have no idea what specific thing I might be doing that touches this off, as far as I can tell I'm just browsing. I thought maybe I had a child dialog opening in a hidden window, but it must be hidden pretty good because I can't find it if I do.

Fedora Linux 42 KDE

Firefox 139.0

lemmy - Link to source

lemm.ee is shutting down at the end of this month

cross-posted from: lemm.ee/post/65824884

Hey everyone


We’re really sorry to say this, but lemm.ee will be shutting down on June 30, 2025.

What you need to know


As of now:

  • New user registrations are disabled
  • Creating new communities is disabled

What you should do:

  • You can export your settings at lemm.ee/settings to take them with you to another instance.
  • If you're moving to another instance, consider adding a note to your lemm.ee profile with your new username. Your old profile will still be visible from other instances even after we go offline.
  • Alternatively, if you want to delete your lemm.ee profile, now is the best time to do it, so the deletion can federate out before we go offline.
  • If you're one of the folks supporting us with a recurring donation, please remember to cancel it (Ko-Fi donations should have been cancelled automatically already). Our leftover funds are already enough to cover our bills for next month, so we can keep things running without any more support.

Because of how Lemmy is built, everything posted on lemm.ee will still be accessible from other instances, even after we go offline.

Why this is happening


The key reason is that we just don’t have enough people on the admin team to keep the place running. Most of the admin team has stepped down, mostly due to burnout, and finding replacements hasn’t worked out.

The sad reality is that while there are a lot of great people on Lemmy, there are also some who use the platform to attack others, stir up conflict, or actively try to undermine the project. Admins are volunteers who deal with the latter group on a constant basis, this takes a mental toll. Please understand why our admins chose to step down, and be kind to the admins on whatever instance you decide to join.

We know this sucks. We're genuinely sorry it’s ending like this. Thank you to everyone who spent time here and helped make it better.

– lemm.ee team

in reply to CtrlAltDefeat

lemmy - Link to source

Rose56

Lemmy actually needs more instances. The thing is that any lemmy instance can go down. We shouldn't depend on lemmy.wold, lemmy.ml or even lemmy.ca, but build instances so we can allow all these users to access lemmy. Just to add a factor, imagine all the costs for hosting an instance.

I wish I could host a lemmy instance, but at this moment I can't.

This entry was edited (1 week ago)

lemmy - Link to source

DBZer0 has begun banning people simply for believing in the concept of copyright

Advocating piracy is one thing, but now banning people for believing in copyright? That's like banning people for following the law. That is banning people for following the law. What gives? And to think a while ago I declared I wouldn't have any reason to not take their bans (or the motives behind them) seriously.

Are we trying to get world governments to ban Lemmy (or, worse, the fediverse)? Love the administrative decisions or hate them, such decisions will drag down the whole fediverse. Typically sites are defederated to protect the sites defederating them from liability. Will this be an example, or does this, out of convenience, not apply? Are we forgetting a large portion of the fediverse's demographics consist of artists trying to make a damn living?

https://archive.ph/CAVDN

LandedGentry doesn't like this.

lemmy - Link to source

Russia closes Crimea bridge hours after Ukraine underwater strike
It says 1,100kg of explosives had been placed deep under water over the course of several months and detonated remotely before 05:00 local time this morning.

Russia closes Crimea bridge hours after Ukraine underwater strike - Public Radio of Armenia

Russian officials say traffic is suspended across Crimea's Kerch Bridge hours after Ukraine said it
Public Radio of Armenia

wordpress - Link to source

Liberux NEXX Linux phone with RK3588S and 32GB RAM hits Indiegogo


Over the past few years a number of companies including Pine64 and Purism have released smartphones designed to run mobile operating systems based on a mainline Linux kernel. But the Liberux NEXX is a work-in-progress Linux phone that could be the most powerful to date… if it actually makes it to mass production.

First introduced earlier this year, the NEXX features a 6.34 inch, 2400 x […]

#crowdfunding #liberux #liberuxNexx #linuxSmartphones #nexx

Read more: liliputing.com/liberux-nexx-li…

Liberux NEXX Linux phone with RK3588S and 32GB RAM hits Indiegogo - Liliputing

Brad Linder (Liliputing)

lemmy - Link to source

GNOME users what Extensions do you use?

I use the following:
- AppIndicator/KStatusNotifierItem support(Most apps rely on trays so this is useful)
- Clipboard Indicator(I wish Gnome natively had this but its fine Cinnamon doesnt to)
- Desktop Logo
- Gtile(I want a tiling window manager like thing for Gnome i heard its faster)
- Quick Settings Audio Panel
- GSConnect (Looks better,Integrates better with GNOME)
- Alphabetical App Grid
- Arch LINUX Updater
- Removable Drive Menu

i created this cause i wonder who uses Gnome on the Fediverse without plugins and maybe Gnome Tweaks and i may find some useful extensions here
Also Cinnamon users may count aswell but idk this is primary focused on GNOME
i also like my GNOME almost stock

This entry was edited (3 days ago)
in reply to Read Bio

lemmy - Link to source

hamsda

KDE Plasma user of 4 years here, I am currently giving GNOME a try with Fedora Workstation. Reading through here, I'm going to try a few new extensions, thanks a lot 😀

My currently used extensions are:
- AATWS (advanced alt-tab window switcher)
- Clipboard Indicator
- Vitals (system resource usage)
- AppIndicator and KStatusNotifierItem Support
- Caffeine
- Launch New Instance
- No overview at start-up
- Places Status Indicator
- Workspace Indicator

There's a feature I'm really missing though. On KDE Plasma 5 the clipboard manager opened a window right below your mouse on pressing Super+V. This window showed all the clipboard entries, was text-searchable and I could navigate and use/enter clipboard entries with my keyboard. Does anybody know of something like this for GNOME?

in reply to pirat

lemmy - Link to source

mbirth

If you’re on macOS, there’s blocs. It seems to pop up on BundleHunt for a fraction of their normal price every once in a while.

Then, there’s RapidWeaver Elements - which just went into Early Access.

However, you might want to evaluate whether a static site generator or some small CMS like GRAV can work for you.


Blocs - The Ultimate Website Builder for Mac and iPad

Blocs is fast, intuitive and powerful visual web design software, that lets you create responsive websites and Wordpress themes without writing code.
Blocs

lemmy - Link to source

What are some good X window managers with strong focus stealing and raising protection?

I'm sick of Kwin. I like the way it looks, but its focus stealing protection is broken. I like to tab out and read ebooks while my games are on loading screens. Some games decide to take focus while they're in the middle of a loading screen. That's why I configured Kwin with high focus stealing protection, and extreme on those particular games. Sadly, it doesn't work. There's no raising protection, and the "keep below other windows" rule is completely nonfunctional. Also, some of the Kwin maintainers are assholes.

I want to try a new window manager. One with strong focus stealing and raising protection. And I'm on NVIDIA, so no Wayland for me yet. Any recommendations?

This entry was edited (1 week ago)

lemmy - Link to source

In a world first, Brazilians will soon be able to sell their digital data
Last month, Brazil announced it is rolling out a data ownership pilot that will allow its citizens to manage, own, and profit from their digital footprint — the first such nationwide initiative in the world.

The project is administered by Dataprev, a state-owned company that provides technological solutions for the government’s social programs. Dataprev is partnering with DrumWave, a California-based data valuation and monetization firm.

Today, “people get nothing from the data they share,” Brittany Kaiser, co-founder of the Own Your Data Foundation and board adviser for DrumWave, told Rest of World. “Brazil has decided its citizens should have ownership rights over their data.”

In monetizing users’ data, Brazil is ahead of the U.S., where a 2019 “data dividend” initiative by California Governor Gavin Newsom never took off. The city of Chicago successfully monetizes government data including transportation and education. If implemented, Brazil’s will be the first public-private partnership that allows citizens, rather than companies, to get a share of the global data market, currently valued at $4 billion and expected to grow to over $40 billion by 2034.

The pilot involves a small group of Brazilians who will use data wallets for payroll loans. When users apply for a new loan, the data in the contract will be collected in the data wallets, which companies will be able to bid on. Users will have the option to opt out. It works much like third-party cookies, but instead of simply accepting or declining, people can choose to make money.


Brazil’s dWallet program will let citizens cash in on their data - Rest of World

Brazil is piloting dWallet, a program that lets citizens earn money from their data, but experts warn it could deepen inequality.
Rina Chandran (Rest of World)
in reply to chemical_cutthroat

lemmy - Link to source

NateNate60

You're being downvoted because your assertion that hosts are responsible for what users upload is generally false.

(1) Treatment of Publisher or Speaker.—No provider or user of an interactive computer service shall be treated as the publisher or speaker of any information provided by another information content provider.

(2) Civil Liability.—No provider or user of an interactive computer service shall be held liable on account of—

(A) any action voluntarily taken in good faith to restrict access to or availability of material that the provider or user considers to be obscene, lewd, lascivious, filthy, excessively violent, harassing, or otherwise objectionable, whether or not such material is constitutionally protected; or

(B) any action taken to enable or make available to information content providers or others the technical means to restrict access to material described in [subparagraph (A)].



47 USC § 230c, a.k.a. Communications Decency Act 1996 § 230

in reply to Mirokhodets

piefed - Link to source

tuckerm

One popular way was that Internet Explorer 6 included something called ActiveX, which basically allowed any website to run code on your computer as though it was a locally-installed program. You could just click on some URL and next thing you know it's writing files to your hard drive. This is one of the main reasons why the Internet Explorer 6 / Windows XP era was particularly virus-filled. A website could open your freaking CD tray.

From the ActiveX wikipedia page:

Developers had to register with Verisign (US$20 per year for individuals, $400 for corporations) and sign a contract, promising not to develop malware.


Promising not to. And they did it anyway. The bastards.

lemmy - Link to source

Liberux Nexx GNU/Linux smartphone starts crowdfunding!

The Liberux Nexx smartphone will be (if it makes it to the production stage) the most powerful smartphone (with the RK3588S) to run GNU/Linux and the mainline kernel. More powerful than the PinePhone Pro, or the OnePlus 6. It will have a decent OLED display, alot of RAM, and much of what you would expect from a privacy-focused GNU/Linux smartphone such as hardware killswitches.

That is to say, this phone will (hopefully if it releases) be a true daily-driver candidate for many people, more so than the current offerings are now. While I am skeptical of it (as I am with any crowdfunded project) I think this will be a great thing if it does make it to production.

Site: liberux.net/

Crowdfunding Link: indiegogo.com/projects/liberux…


Liberux NEXX

THE LINUX PHONE YOU’VE BEEN WAITING FOR. | Check out 'Liberux NEXX' on Indiegogo.
Indiegogo
This entry was edited (1 week ago)
in reply to April (She/Her)

lemmy - Link to source

solrize

Meh, I'm feeling like this whole concept is pretty flawed and it might be better by now to just run Graphene or Lineage out of the box. Maybe a niche Android phone manufacturer like Unihertz could find incentive to do something like that.

A fully FOSS dumbphone would possibly be of more interest than a smartphone, fwiw. Enough smartphone projects have failed that I'm unexcited about this latest one.

lemmy - Link to source

Advice for picking a PSU for server class GPUs? Also a question about adapter cable

So its been almost 10 years since i've swapped computer parts and I am nervous about this. Ive never done any homelab type thing involving big powerful parts, just dealt with average mid range consumer class parts in standard desktop cases.

I do computational work now and want to convert a desktop pc into a headless server with a beefy GPU. I bit the bullet and ordered a used P100 tesla 16gb. Based on what im reading, a new PSU may be in order as well if nothing else. I havent actually read labels yet but online info on the desktop model indicates its probably around a 450~ watt PSU.

The P100 power draw is rated at 250 W maximum. The card im using now draws 185 W maximum. Im reading that 600W would be better for just-in-case overhead. I plan to get this 700W which I hope is enough overhead to cover an extra GPU if I want to take advantage of nvidia CUDA with the 1070ti in my other desktop.

How much does the rest of the system use on average with a ryzen 5 2600 six core in a m4 motherboard and like 16gb ddr4 ram?

When I read up on powering the P100 though I stumbled across this reddit post of someone confused how to get it to connect to a regular consumer corsehair PSU. Apparently the p100 uses a CPU power cable instead of a PCIE one? But you cant use the regular cpu power output from the PSU. Acording to the post, people buy adapter cables with two input gpu cables to one output cpu cable for these cards.

Can you please help me with a sanity check and to understand what i've gotten myself into? I don't exactly understand what im supposed to do with those adapter cables. Do modern PSUs come with multiple GPU power outputs/outlets from the interface these days and I need to run two parallel lines into that adapter?

Thank you all for your help on the last post im deeply grateful for all the input ive gotten here. Ill do my best not to spam post with my tech concerns but this one has me really worried.

Amazon.com

www.amazon.com
This entry was edited (2 weeks ago)
in reply to LandedGentry

lemmy - Link to source

SmokeyDope

Thank you! Putting the parts I have now into the pc part picker shows an approximate draw of 334W. Adding 65W on top of that to account for p100 max draw is 400w expected draw. The 1070ti I have has an expected draw of 150W adding that on would draw 550W which seems in range of 700W psu.

Theoretically my current 450w PSU could handle p100 maybe but 50w overhead is slim.

Budget is everything to me right now the 1050W PSU are like 150$ while that 700W psu is 50$. When things aren't so tight and if I get deep enough down the rabbit hole to chain multiple server class GPUs ill probably be in a better spot to afford an expensive psu along with a big batch of cards.

This entry was edited (2 weeks ago)
in reply to SmokeyDope

friendica (DFRN) - Link to source

Nanook

@SmokeyDope Please understand that a PSU is rated at the total power it can supply to 5v and 12v lines combined, but it can not supply that full power to both. And in my experience many brands of PSUs do not live up to their ratings. If you're going to run a "beefy" GPU and CPU, I suggest going with 1000 watt or 1200 watt supply. If you are worried about an efficiency then go with a Platinum, they provide good efficiency even at low load levels. This will give you the overhead you need for your machine to run without strain.

lemmy - Link to source

How to deal with those annoying TVs blaring Fox News all day

Source: bsky.app/profile/funnysnarkyjo…

In fact you can use your smartphone to change the channel on nearly any TV. In the comments on that post some people talk about how to do it. Basically you need a smartphone with either builtin IR or use a USB-C IR blaster or if your phone has a 3.5mm headphone jack you can also try one of those but I'm not sure if the 3.5mm ones are as commonly supported.

This entry was edited (2 weeks ago)

lemmy - Link to source

How ok would you be if teleported right now into a field in Peru in the 1300s with... (see description)?

A) Nothing, just totally naked

B) What you're wearing and anything you carry with you (even if you're not carrying it right now) like a bag

C) What you're wearing, what you carry with you, and the contents of your home (it will be teleported within a few hundred metres on the surface in an accessible location, but obviously won't be connected to any services like electricity or water)

in reply to formulaBonk

lemmy - Link to source

NuXCOM_90Percent

While they're at it, why not just hack the government to reverse last year's election, amirite?

I know most of us loved Mr Robot and watching dinozzo and abby double team a keyboard and Wolverine getting a blowy and all that fun stuff, but that really isn't how things work.

These aren't off the shelf pre-trained models. The model is a big part of the company's product and, increasingly, the cost of training is being partially offloaded to customers under the guise of "tune the model to your data".

And IF we have a Bones situation where someone has inscribed a virus onto human remains to destroy a one of a kind machine or whatever: That is what version control is for. "Hmm. The May 2025 model isn't working. Okay, switch back to April"

Also, these "models" are a lot closer to just running OCR on a feed and logging which traffic camera saw one of the flagged license plates.

This entry was edited (2 weeks ago)

lemmy - Link to source

Kennedy says COVID vaccines no longer recommended for healthy children and pregnant women

In a 58-second video posted on the social media site X, Kennedy said he removed COVID-19 shots from Centers for Disease Control and Prevention’s recommendations for those groups. No one from the CDC was in the video, and CDC officials referred questions about the announcement to Kennedy and the U.S. Department of Health and Human Services.

U.S. health officials, following recommendations by infectious disease experts, have been urging annual COVID-19 boosters for all Americans ages 6 months and older.

A CDC advisory panel is set to meets in June to make recommendations about the fall shots. Among its options are suggesting shots for high-risk groups but still giving lower-risk people the choice to get vaccinated.

https://apnews.com/article/covid-vaccine-pregnant-women-children-70c358cad726e57d680234c3ecdec926

lemmy - Link to source

What happened to the internet...

What happened to the internet to make it so that you now have to say "I'm not a medical expert, a beauty expert, an underpaid Walmart cashier struggling just to make ends meet just to lose my job to a robot or a piercing expert so take my advice with a grain of salt, but yeah, I think it would be wonderful for you get your ears pierced"?

I'm probably aging myself here, but it's mildly annoying to see so many words for something that should just be assumed until someone explicitly says "I'm an expert, make sure you clean them regularly or don't get them at all".

The earrings are just a random example I thought of just now.

(This is somewhat satire, somewhat curiosity and somewhat ranty lol)

EDIT: Thanks for the insightful history lesson guys! I actually learned a little bit about the internet (at the risk of really honing in on my age lmao). I feel I should clarify, though. The issue I want to address isn't the use of disclaimers in general, but rather the need for exceptionally long ones like my example above where the disclaimer is like 5x longer than the actual comment, which, btw, thank you all for commenting at least 5x more information than disclaimers lol

This entry was edited (2 weeks ago)
⇧