Please tell your friends about federated social media site that speaks several fediverse protocols thus serving as a hub uniting them, hubzilla.eskimo.com, also check out friendica.eskimo.com, federated
macroblogging social media site, mastodon.eskimo.com a federated microblogging site, and yacy.eskimo.com an uncensored federated search engine. All Free!
Serious question for you all. I too wish to see Linux use increase. I also want to see corporate social media die. I am thinking of requiring my students to create Lemmy accounts for a Lemmy group i create.
Do you think this might move folks away from essy corporate os and social media? How do You see it giving wrong?
I like it! Even if the majority of em completely abandon the accounts afterwards, it’ll increase the visibility of a fledgeling platform AND it’ll show a few folks that alternative social media platforms exist.
I mean, shit, if lemmy can suit my needs there’s no reason it shouldn’t work for at least some of em.
I remember a teacher requiring us to use Matrix for a coding class. We still mostly used Discord, and after that class ended, we never used it again.
You and I have a reason we use Lemmy: we don't want to use Reddit and want the Fediverse to grow. Simply forcing your students to make Lemmy accounts won't do anything, in fact it might make them hate it (Oke boomer).
I'm trying to get a job in IT that will (hopefully) pay more than a usual 9 to 5. I'm been daily driving Linux exclusively for about 2 1/2 years now and I'm trying to improve my skills to the point that I could be considered a so-called "power user." My question is this: will this increase my hiring chances significantly or marginally?
For what its worth, I know that while a lot of the hardcore Linux community seems to absolutely despise Ubuntu/Canonical because of snaps and whatnot, I don't think there is anything actually wrong with using Ubuntu if that is what works for you. Use the best tool for the job!
I had an Acer laptop once. I had Ubuntu on it. I had problems with random crashing after a few minutes, I ran memtest, it took a few hours for a full test and came back with a whole slew of faults. I sent it to Acer under warranty and they told me that Linux was the problem and I should leave windows on it.
@gpstarman I only use Asus and Gigabyte boards, both have the ability to flash the BIOS using the maintenance engine on the board without even having a CPU or memory installed, let alone an OS booted.
Well I was going to try Hyprland this weekend, but I think instead I will very much not do that.
I hope someone forks it from a good commit just before they replaced wlroots. I don’t know the specifics of compositor code at all, but I bet It’s going to cost them quite a bit of velocity to maintain their replacement.
Either self-hosted or cloud, I assume many of you keep a server around for personal things. And I'm curious about the cool stuff you've got running on your personal servers.
What services do you host? Any unique stuff? Do you interact with it through ssh, termux, web server?
Two old HP thin client PCs configured as 4TB SFTP file servers using vsftpd on Debian. Each one uses software RAID 1 with both an NVMe and SATA SSD internally, and are in two separate locations with a cron job which syncs one to the other every 24 hours.
People who actually know what they are doing will probably find this silly, but I had fun and learned a lot setting it up.
I am using lftp and mirror. One server functions as the "main" server, which mirrors the backup server to itself once per day at a specific time (they both run 24/7 so I set it to run very early in the morning when it is unlikely to be accessed).
In my crontab I have:
# # * * * /usr/bin/lftp -e "mirror -eRv [folder path on main server] [folder path on backup server]; quit;" sftp://[user]@[address of backup server]:[port number]
This isn't a gloat post. In fact, I was completely oblivious to this massive outage until I tried to check my bank balance and it wouldn't log in.
Apparently Visa Paywave, banks, some TV networks, EFTPOS, etc. have gone down. Flights have had to be cancelled as some airlines systems have also gone down. Gas stations and public transport systems inoperable. As well as numerous Windows systems and Microsoft services affected. (At least according to one of my local MSMs.)
Seems insane to me that one company's messed up update could cause so much global disruption and so many systems gone down :/ This is exactly why centralisation of services and large corporations gobbling up smaller companies and becoming behemoth services is so dangerous.
Latest Crowdstrike Update Issue: The issue seems widespread, affecting machines running various CrowdStrike sensor versions. CrowdStrike has acknowledged the problem and is currently investigating the cause.
I isn't even a Linux vs Windows thing but a competent at your job vs don't know what the fuck you are doing thing. Critical systems are immutable and isolated or as close as reasonably possible. They don't do live updates of third party software and certainly not software that is running privileged and can crash the operating system.
I couldn't face working in corporate IT with this sort of bullshit going on.
A while back there was some debate about the Linux kernel dropping support for some very old GPUs. (I can't remember the exact models, but they were roughly from the late 90's)
It spurred a lot of discussion on how many years of hardware support is reasonable to expect.
I would like to hear y'alls views on this. What do you think is reasonable?
The fact that some people were mad that their 25 year old GPU wouldn't be officially supported by the latest Linux kernel seemed pretty silly to me. At that point, the machine is a vintage piece of tech history. Valuable in its own right, and very cool to keep alive, but I don't think it's unreasonable for the devs to drop it after two and a half decades.
I think for me, a 10 year minimum seems reasonable.
And obviously, much of this work is for little to no pay, so love and gratitude to all the devs that help keep this incredible community and ecosystem alive!
I undertook a sizeable upgrade today, bringing a skylake era build into the 2020s with a 13th gen. All core components- memory, motherboard, GPU, everything must go... except the drives. We were nervous, my friend really felt we should reinstall. There was debate, and drama. Considerations and exceptions. No, I couldn't let my OS go. I have spent years tweaking and tuning, molding my ideal computing environment. We pushed forward.
Well I'm pleased to say it was mostly uneventful. The ethernet adapter was renamed causing misconfigured dhcp, but otherwise it booted right up like nothing happened. Sorry, linux is boring now.
I have tried Linux as a DD on and off for years but about a year ago I decided to commit to it no matter the cost. First with Mint, then Ubuntu and a few others sprinkled in briefly. Both are "mainstream" "beginner friendly" distros, right? I don't want anything too advanced, right?
Well, ubuntu recently updated and it broke my second monitor (Ubuntu detected it but the monitor had "no signal"). After trying to fix it for a week, I decided to wipe it and reinstall. No luck. I tried a few other distros that had the same issue and I started to wonder if it was a hardware issue but I tried a Windows PC and the monitor worked no problem.
Finally, just to see what would happen I tried a distro very very different than what I'm used to: Fedora (Kinoite). And not only did everything "just work" flawlessly, but it's so much faster and more polished than I ever knew Linux to be!
Credit where it's due, a lot of the polish is due to KDE plasma. I'd never strayed from Gnome because I'm not an expert and people recommend GNOME to Linux newbies because it's "simple" and "customizable" but WOW is KDE SO MUCH SIMPLER AND STILL CUSTOMIZEABLE. Gnome is only "simple" in that it doesn't allow you to do much via the GUI. With Fedora Kinode I think I needed to use the terminal maybe once during setup? With other distros I was constantly needed to use the terminal (yes its helped me learn Linux but that curve is STEEP).
The atomic updates are fantastic too. I have not crashed once in the two weeks of setup whereas before I would have a crash maybe 1-2 times per week.
I am FULLY prepared for the responses demanding to know what I did to make it crash and telling me how I was using it wrong blah blah blah but let me tell you, if you are experienced with Windows but want to learn Linux and getting frustrated by all the "beginner" distros that get recommended, do yourself a favor and try Fedora Kinoite!
edit: i am DYING at the number of "you're using it wrong" comments here. never change people.
On Monday, the Politico website published an analysis under the headline “Why has Elon Musk disappeared from the spotlight?” It found a sharp drop in the number of times that Trump posted about Musk on his Truth Social platform, from an average of four times a week in February and March to zero since the start of April.
In addition, White House officials no longer fill their social media feeds with Musk-related content. Reporters seldom ask about him at the White House press briefing. Members of Congress are giving his name a wide berth.
Musk seems to be taking the hint. This week, the Tesla chief executive confirmed that he had reduced his role as the unofficial head of the so-called “department of government efficiency” (Doge) to just two days a week, and will also cut his political spending substantially – the latest public signal that he is shifting his attention back to his business empire amid growing investor concerns.
The president’s billionaire backer was ever-present at the start of Trump’s term but is now pulling back from politics – and Republicans want to keep it that way
I was walking home yesterday and I just happened to come across an HP LaserJet p2035n sitting by the dumpster, waiting to be taken away. I've never owned a printer, but this thing looked like it came from an era when such devices were made to be reliable instead of forcing DRM-locked cartridges, so I picked it up and took it with me. After getting situated I started some online research and I figure this brand of printers was manufactured from about 2008-2012, and my printer has a 2012 date.
As it turns out, this tossed printer works perfectly fine. I plugged it into power and ran a test sheet, and it prints almost perfectly. I plugged it via USB-B into my PC running Fedora 41 and immediately it gets picked up and added as usable printer. I then plugged the printer into its Ethernet port and fortunately this thing is new enough to have Bonjour (i.e. mdns) services so once again my PC just immediately finds it and can print. Awesome!
My laptop is a MacBook. While it did detect the printer over the network, it couldn't add the printer because it couldn't find a driver to operate it. I honestly don't understand why that's a problem since I assume macOS also uses CUPS just like Linux. But at any rate, I found the solution:
With CUPS on Linux I can share the printer. After configuring firewall-cmd to allow the ipp service now my iPhone and my MacBook can also print to the shared printer using the generic PostScript driver. So, in conclusion, Linux helped me 1) use this printer with no additional effort of installing drivers, 2) share this printer to devices which were not plug-and-play ready, and 3) print pics of Goku and Vegeta. As always, I love Linux.
Apple bought and sponsored CUPS, essentially, until they no longer did. That story is very briefly touched on here phoronix.com/news/Apple-No-Mor…
I don't know the full history of mdns and zero config networking, but Bonjour is indeed Apple's implementation of it. In my printer's web config page it specifically lets me enable/disable Bonjour, so I assume they are using Apple's implementation. On Linux we have Avahi as a competing piece of software to provide the same service.
Back in 2007 Apple effectively acquired the open-source CUPS project and in 2017 then decided to no longer develop CUPS under the GPL but instead the Apache 2.0 license for this widely-used Unix/macOS/Linux print server
I've had no joy getting my Brother printer to share over the network with our macs... It seems like the mac sees it for a moment and then it vanishes. The closest Ive come is having the printer wake up when the Mac sent a job, but it didn't print anything. Prints fine from Linux USB.
@GnuLinuxDude I mostly use HP printers because with Linux they are always plug-in-play and because although they will provide a message telling me my ink is cheap third party ink, they will none the less accept and print with it.
The model I previously used, HP OfficeJet 5258 All-in-One Printer, the printer always worked well but the scanners kept breaking. I went through four of these before I tried an Epson. The Epson initially worked with 3rd party ink then after a software update didn't so at that point I trashed it and bought another HP, this time a HP OfficeJet 8015e Wireless Color All-in-One Printer which is much more robustly constructed. In fact while taking it out of the box, I accidentally dropped it from chest level and all it did was bounce, no pieces broke off, nothing. So far it has been reliable both for scanning and printing although the scanner is easier to jam but at least it doesn't break in the process of my unjamming it.
You can download Gutenprint on MacOS. An old friend was in such case, no driver for its rather old printer. I downloaded and installed the latest Gutenprint driver package, and it worked like a charm.
More good news - if you ever use up the current toner cartridge, that printer will take generic ones that cost $20 or less. Assuming you even print enough to need one.
Shuttle Nano AI Mini PC G1 is a Qualcomm Snapdragon-powered computer
After Qualcomm introduced its Snapdragon X processor family last year, nearly every major PC maker introduced one or more laptops that would use a Snapdragon X series processor. But it’s been harder to find desktop computers using the chips. Lenovo and GEEKOM have both introduced models, but for the most part they still seem to be listed as “coming soon” rather than available for […]
GNU Taler begins operating in Switzerland, distributed by the Taler Operations AG. Gnu Taler aims to be a “digital wallet” and has been used by the swiss national bank as well as the european national bank as a example for how a digital currency handed out by the state could work. It aims to be as privacy preserving as cash for the buyer while not allowing the seller to evade taxes.
Currently the Taler is brought out by a special organisation, the “Taler Operations AG”, and not the national bank, although both the national bank as well as the Taler Team have shown interest in a official digial currency by the national bank based on the Taler. But we need to relativate as the national council has stated that the introduction of a digital currency would probably take relatively major legislative changes and therefore take a bit of time.
I don't necessarily have to wait, it's more a generic advice.
Can you please expand though, as I'm curious, why you won't wait and you plan to use it?
Can you also comment on my follow up question, namely what are the limitations at the moment, both technically and legally? Basically does not living in Switzerland make a difference anyway for users?
I watched technical talks on GNU Taler ages ago so this might be out of date but the most difficult part to me would be the banks being interested in supplying the service necessary. You get money to your browser wallet by transferring it from your bank account.
I don't live in Switzerland and can't imagine banks or government supporting anything but their own version that gives them control.
Independent One-Click Payments!GNU Taler is an online payment system that uses Chaum's blind signatures to provide robust unbreakable privacy for customers a...
Thanks again, if the wallet is "filled" by a bank transfer then I imagine anything able to do so, e.g. my random European bank that allow IBAN transfer, would suffice as long as my wallet itself has an IBAN or that the service provider hosting that wallet has one and then "store" the then "money" for it and allow me to spend it with other GNU Taler wallets.
Anyway I'll explore through a recent technical talk indeed, good suggestion.q
It was mostly a playful comment on my part (indicated by the emoji) - I've waited this long so they might as well do it properly.
I would like to buy products/services online privately, "using cash" as it were. I also value software freedom and the Taler client is GPL. The API is LGPL but hopefully I can avoid using proprietary software for transactions.
I looked into setting up a method of donations on itch.io when I was focused on that hobby and the options of PayPal or Stripe just felt icky. I don't want to use them, or encourage others to do so.
I looked at this a looong time ago, but the basic idea is that the tokens (equivalent to cash coins/banknotes) are generated on the end user's device, through some public-key cryptographic back-and-forth protocol. The issuer (bank/central bank/payment provider) does not see these tokens (they're only on the end users device), but can verify that they're legit (i.e. issued by them) somehow.
You can take one of these tokens to them, and deposit it in an account. They won't know who it's from but they know it was legitimately issued by them. Depositing a token is also supposed to be the only way of figuring out if it is a legit token, the bank will not tell you if a token is legit unless you deposit it.
When someone pays with these tokens in a shop, the shop will want to immediately (during checkout) deposit them, to make sure they're legit, and also to make sure the token hasn't been double spent. A shop that doesn't do that makes itself vulnerable to fraud. This means shops will have a hard time hiding their revenue (to dodge taxes) compared to cash.
If someone you trust gives you a token (birthday money from your grandma, say), you don't have to immediately deposit said token, since presumably you trust your grandma to not give you fake or double-spent tokens. Since you trust you grandma, there is no need to deposit the token and involve the bank, and that transfer would be untraceable (it's literally just copying a number from her phone to yours).
The idea is that shop owners would have a hard time dodging taxes without opening themselves up to fraudsters using fake tokens, while the customer cannot be identified. You'd also be able to exchange tokens with family and friends in a way that isn't traceable, as long as you trust them to not screw you.
I'm expecting that if she has been scammed (and you can find out by depositing the token), you can report this token to the police and they might be able to ask the banking system in which account was this token deposited, to hopefully trace the scammer back.
If so, this looks much safer than the scams that ask grandmas to give them giftcard codes.
But that’s better than cash, where you can’t make a backup
Depends on threat model, eg police will seize phones/computers/devices all the time but will only seize money if they think it's related to a crime. As long as you're not being arrested for a money-related charge then your cash would most likely be untouched but your devices will be lost.
If the cops steal my USB drive with my encrypted bitcoin wallet, I just restore it from the backup and they've stolen nothing.
In the US, cops steal cash all the time. Sometimes tbeh steal it personally, but they have an incentive to "legitimately" steal it to add it to their budget. Its fucked.
I rarely wish for an opensource project to fail, but Taler is an exception. Offering a digital currency system for the government to use is like sending an efficiency improvement proposal to Auschwitz.
You might actually like Taler, it's fundamentally different from blockchain based systems, to the point of being a cryptocurrency only in the technical sense, but not having any of the properties people associate with that word culturally.
Taler doesn't use any kind of proof of work, and so doesn't consume excess power or other resources, at least not more than, like, visiting any normal webpage. It's also not decentralized, and only partially anonymous, so I can acquire money anonymously and no one can trace the money I got to a particular spend, but the only place I can reasonably spend it has to be registered to the centralized issuer and is firmly not anonymous. And the only things they can do with the tokens they receive is redeem them, which means there's no place for tax evasion because the issuing authority can track every dollar the registered vendors redeem with them. And you can't really transfer money from random person to person, so there's no black market opportunity, etc.
So basically the only thing Taler "protects" is that the buyer's identity can be anonymous, but any vendor accepting Taler must not be and are highly trackable.
These are things I actually don't like about Taler, but we may be on opposite sides of a few issues, which is fair.
How would one acquire tokens anonymously but in a way that you can verify that you acquired genuine tokens, and what keeps those tokens from being given to multiple people? This is really where the privacy aspects fall down. It’s a hard problem to solve in Bitcoin, but at least you can have Bitcoin ATMs that you can verify that you received the funds.
A Taler ATM it seems could issue invalid tokens or issue the same tokens to every client and there would be no way to know until you tried to spend it or deposit it in your account (thus defeating the anonymity).
I'm not 100% deep on the crypto, but my understanding is they use blind signatures (which have been around for a long time) to do their issuing. If you're unfamiliar, these are kinda like an envelope with a hole cut in it, so you can put a document in it with a hidden unique key, and they can see some info through the hole, and can stamp their signature through the hole to validate that it's legit without knowing the hidden info.
Then the user can remove it from the envelope (unblind) and now have a certified valid coin without the issuer knowing which coin is theirs.
So in the context of an ATM, the ATM wouldn't "issue" coins, it would be given a request for coins from your wallet, it would certify the validity of that request, and then give your wallet back that certification in such a way that the wallet could unblind it and have the anonymous secret. So ultimately your wallet is the one that's in charge of producing the unique parts.
It seems there's also a system for making sure you don't produce bad transactions by asking you to generate N, promping you to unwrap a bunch of them to prove there's nothing weird about them, and then signing one of the remaining ones under the assumption it's also legit. At least it sounds like it, but I'm even less familiar with that part. But even if you did spoof someone else's secrets... it doesn't allow you to steal their money I don't think... because in order to have your transaction validated in the first place you had to truly give the ATM your money... so you could I guess pay $10 to screw over your friend for $10 because it'll look like they spent money they didn't... but you still spent $10... so it's less like stealing their money and more like paying to throw their wallet off a bridge? You don't gain anything, but they lose something? Maybe there's another exploit I don't know about in the like "renewal" or "refund" or "transfer" protocols that make that more important.
Anyway, I'm still not a Taler fan, but in this case I think it's possible to do what they claim. Now, if the bank or ATM or whatever asks for ID or an account to use their services, they could track that you withdrew money, and how much. That's data they can collect. The anonymous buyer part just means they can't tie the coin they issued you to a spent deposit they receive later. So they know you got $10 out, and they can assume you probably spent it, but they can't know what you spent it on.
I think that makes some sense to me. I’m moderately familiar with signatures and encryption. I’m going to do some more research into blind signatures now since that’s one thing I have never had to implement.
Without doing that research, I still feel that the bank or whatever could store the signature info at the time of signing with the account that requested it, but perhaps the blind signing even protects against that if the verification process is done in some way that the original signing request info isn’t present in the same form.
Anyway, thanks for the response!
ETA:
Oh the other hole in the ATMs I was talking about assuming a malicious ATM. Since the coin can only be verified by depositing it, (without doing more research on this) I still don’t see a way to verify that the ATM actually gave you a valid signature. Maybe it’s possible to validate the signature before unwrapping the coin, then impossible to validate the unwrapped coin that is given to the merchant. I could see that.
Also presumably these could be bank ATMs and not sketchy Bitcoin ATMs so maybe the malicious case isn’t as much to worry about.
Digital currency without "blockchain", say it ain't so! This is why I think it might actually work. It's not based on some kind of Rube Goldberg experiment to run the world power into nothingness.
Just because it's built on a block chain doesn't mean they relinquished control and decentralized it. But it's a platform that allows you to decentralize.
Is this worth it as an upgrade to our existing centrally controlled currency? That's a different discussion.
Does it solve the problem blockchain provides a solution for? Does it allow for decentralization? It appears the answer is no.
Decentralized currencies will only actually make sense when the material incentives of our economic system would benefit from them. Capitalism is literally all about concentrating the control of capital and the means by which we produce things. Sadly, decentralized currencies will never be allowed to decouple themselves from these economic systems. There is too much material power to prevent that. And by material power I mean literally the enforcement of these concentrations of wealth through the use of violence.
The tech is cool. But it doesn't magically solve the problem by simply being invented. It's why no one is actually paying with these cryptocurrencies on anything but an extremely small scale.
A currency that cannot be manipulated by capitalist for their benefit has no place in our world. So, it will never reach any meaningful real use until those structures are dismantled. It will just continue to be a speculative asset that rich people dump their access wealth into and poor people play as the lottery.
We're referring to decentralized management, not decentralized distribution. Fortunately I don't think anyone in this thread is pretending that any kind of money is going to make the world better.
Customers will use traditional money transfers to send money to a digital Exchange and in return receive (anonymized) digital cash. Customers can use this digital cash to anonymously pay Merchants. Merchants can redeem the digital cash for traditional money at the digital Exchange. As Merchants are not anonymous, they can be taxed, enabling income or sales taxes to be withheld by the state while providing anonymity for Customers.
This is even worse that the current system as it essentially means flat tax regardless of your income. This means a poor person is paying the same income tax through purchasing items at a store who will be on the hook for the taxes so naturally will pass on to you and at the same time a rich person will pay the same price and tax. Further since it is centralized all the same issues of corruption and exploitation exist even if the intent today is good.
The taxing isn't determined by this tool, it's determined by the government. What this tool tries to prevent is hidden money exchanges, which affects both methods of taxing, not only flat taxes but also income-based taxes (since a hidden sale is giving the seller a hidden income).
Not really. Zelle seems to just be US banks implementing the payment and bank-to-bank transfer systems that other countries already have. Except, at least for Australia with our 'Osko' system it has the involvement of our Reserve Bank and is mandated to be supported universally, whereas Zelle is completely private. The traditional lack of that bank-to-bank transfer ability is why apps like Venmo and Cash App have been popular in the US, which I think explains why Zelle has had an app until last month, as consumers expect that, even though it's owned by the major US banks.
Taler on the other hand seems to be "What if crypto but with fiat currency and also the recipients aren't anonymous".
You know most cryptocurrency reciepts are super transparent, right? The blockchain is a public ledger. There is no anonymity on non privacy coins like bitcoin
You're right, I misspoke with the term anonymous, it's actually pseudononymous the same as Lemmy or Reddit are. It's not like there is a published index of names to wallet addresses.
KYC laws are basically that index, except they're only available to companies and governments and advertises and basically anyone else who pays for it from coin analytics companies
I'm not interested in defending bitcoin, but that is mostly misinformation. If you want to truly condemn bitcoin you should target it's actual harm, the fact that it's accelerated low-friction financialization of capitalist money, so therefore immiserates the working class faster than fiat. Come at it with the good old Marxist critiques of capital, because that's all it really is. If you argue against it with flimsy falsifiable claims like you just did, a true believer will make you look like a fool.
The first claim is the most incorrect, as bitcoin is a single permanent public ledger where all transactions are verifiable by anyone, and on/off ramps are almost 100% regulated. I would argue that it's actually the hardest currency with which to evade taxes, though in the early days where onramps didn't do KYC and government wasn't as aware of it, that would have been more true. Physical fiat or Monero (A crypto that anonymizes sender and receiver) are probably the easiest currencies with which to avoid taxes.
The third claim is conditionally incorrect. Bitcoin transactions all have a clear sender and receiver party. Though I figure maybe you refer to some kind of regulatory tax assignment, in which case that would happen outside of the protocol and is up to the local government to decide.
The second claim is just kind of ... Hard to parse? I'm not sure what you mean by centralized exchanges. Exchanges of any type are almost always private entities that are themselves a centralized organization, and most currency exchanges process both fiat and crypto. Guessing I just need more context for this one.
Excuse me but what did I write that's misinformation? I wasn't describing Taler, I was describing bitcoin / crypto. Nothing I said was incorrect, and I was correcting your own misinformation (Mind you it's not your fault that you were misinformed and I don't think you were doing so intentionally, it's easy to pick up misinformation about unpopular subjects because people are more likely to take facts at face value).
Regarding mixers, I have a friend in US gov that says they're not immune to targeted investigation. You can hide in them only until you catch institutional attention, wherein they have a big enough database of inputs and outputs to simply know who you are. However apparently Monero is truly a pain in their ass.
And saying "a ledger is public doesn't protect it from illicit use" is kind of silly seeing as you can use any currency for illicit use if you want. What matters is if you can be caught, and its extremely easy to be caught doing something illicit if you do it with bitcoin as the transaction history is right there in front of the world.
I want to have a dual-boot laptop where half is Windows and half is Debian. If i encrypt Debian during installation, will it break Windows? I just want to be safe. Thanks in advance
I got tired of windows updates breaking my dual boot. After some research I found that it's possible to have two uefi partitions: one for windows and one for Linux. It's not standard but there is nothing expressly written into the efi spec that prohibits it. And it just works. My bios doesn't care, and works with them both just fine.
I only use Windows for that 1% of business stuff I can't accomplish in a vm under windows. Invariably after I boot into widows once ever 3 months it installs so.e update and would kill my ability to boot into Linux. Since setting up 2 partitions I haven't had this problem.
My company uses a VPN where the client is so slow inside the VM it is functionally useless. 99%of the time I can still get away with it because my connection amounts to a couple of telnet sessions, but when I actually need data or a spreadsheet or something transferred local, I need to fire up windows directly to snag it.
Sonicwall has a VPN client that will run fine on Linux (or so they say), but the company won't switch over to it. And sonicwall considers the windows only version eol and won't add a Linux version
I have copied a DVD of an old family video to my computer but am having trouble playing or converting all of the video content.
If I open the DVD directory in VLC or MPV to play it I can see that the video is 1h46m but it will only play the first 14m53s, which seems to correspond with a 'chapter'. If I open the directory in Handbrake it will detect the full video length of 1h46m and a total of 8 chapters but will only convert the first chapter. Ffmpeg will convert the three main .VOB files to .mkv but the output files only add up to 30m or so of video, which is an improvement over opening the DVD directory in a media player or converting it using Handbrake but still doesn't pick up the full video length.
You need software (like MakeMKV) to read the metadata from the DVD and properly chop up or combine the video files. It should be able to export without any re-encoding.
On a separate note, if you want to shrink the files, I’d recommend av1an if you are comfortable with a little CLI and want the best possible encoding efficiency. In a nutshell it chunks videos and encodes them in parallel, hence its great for really long files like movies/TV on DVDs.
For many years, the SkyRC MC3000 has been considered one of the best chargers for round batteries. The user has full control over the charging process and can set not only the charging current but also many other parameters. It can also connect to a PC or smartphone for settings and data logging.
And here comes the new SkyRC MC5000!
I was really looking forward to the SkyRC MC5000: a modern design with a large color display, innovative scroll-wheel input, charging currents of up to 5 A per slot, Bluetooth connectivity and advanced analysis features.
All in all, everything has worked so far, but the range of functions still seems somewhat limited. Many enhancements could potentially be introduced through firmware updates, such as expanded parameter ranges, more effective use of the status LEDs and possibly even support for 1.5V Li-ion batteries. The absence of program memory slots is particularly disappointing. At this price point, a PC interface for control and data logging should also be included.
In its current form, the SkyRC MC5000 is still a long way from being a real successor for the MC3000. It is not a bad device by any means, but it does not yet fully meet the expectations I have for a professional charger in this class.
The manufacturer web site is almost unusable and doesn't have an ordering button. There's a "Where to buy" link way at the bottom, that doesn't work for me. Web search shows this is about a US$ 200 charger. Ouch. Thanks for the review but yikes. Also I don't want to install a phone app to use or update the charger. You are right that the missing features being important (PC interface, bidirectional USB charging).
@SammysHP That's great except just how many primary batteries do you need to replace before this thing pays for itself? Pricing is not justified. I spent a whole of $30 for a unit from popular mechanics of all places. it charges every chemistry except lithium ion, I have separate chargers for those, does so individually for each battery so I can put say an NiMH in one slot, an alkaline in another, and it will charge as appropriate for each.
I live in a world of mostly Li-ion batteries around me, NiMH come second. Primary (alkaline) batteries? Nope, never use them because of their poor performance, environmental problems and because they leak.
Not all of my devices can charge their Li-ion batteries. A simple charger is enough in most scenarios. You only need an analyzing charger if you want to monitor and maintain the performance of your batteries.
@SammysHP The reason I use Alkaline in some applications is I have some devices where voltage is important and they will not run on 1.35 NiMH voltage but they will run on 1.6 Alkaline voltage. But I agree, performance is bad. Unfortunately the 1.5v lithium ion cells aren't really 1.5v, they're 3.7 or so and regulated down. This causes two issues, the regular introduces a lot of RF noise, and the voltage is flat right up to the point of complete exhaustion so you can't tell when the battery is ready to crap out.
I have some devices where voltage is important and they will not run on 1.35 NiMH voltage but they will run on 1.6 Alkaline voltage.
It's presumably not your doing, but I have to note that's a terrible design. Under light load, an alkaline hasn't even expended a third of its energy by the time it hits 1.35V (example test result).
@SammysHP Again, the devices in question actually use three cells (4.5v nominal) will tolerate 4.8 but not 4.05. So can't substitute one cell for two in series. Could probably regulate down from a higher voltage but then you get the noise issues again.
Yup, this is huge. Wayland gaming is now a possibility. With Explicit Sync (needed for NVIDIA users) and VRR, there's now no excuse to keep gaming in X11 in both DEs.
I have been playing around with chmod, chown, setfacl and special bits trying to get multiple system/full users in same group correct access permissions to my media collection.
But I've messed it up somehow and now I'm having weird problems that are hard to track.
I would like to set my whole collection back to the defaults.
What is the best way to do this?
One problem I've had when making changes to so many files is the process seems to go forever without completing. Eventually it gets killed so my filesystem has variable attributes throughout. how can this be worked around?
I want everything to be owned by myuser, group media, everything else default I will sort it from there once I have a fresh slate.
And is there a way to backup these attributes only? I don't have enough storage to backup the files themselves.
It is Debian with ext4 filesystem.
Edit to add: Media collection is on its own separate drive/filesystem; this has no impact on anything else on the computer.
I'm fed up telling people not only to have backups but moreover to test their backups. This way seems to work better. It's not for OP; it's for my younger self and those like me.
I'm not familiar with chacl ("change the access control list of a file or directory"). Is is similar to setfacl ("set file access control lists")? A matter of preference/habit?
It seems like -B does "Remove all ACLs". Which I guess is what I am asking for? Files on linux are OK to have no ACLs?
About the find ... {} +, I see {} +
runs the specified command on the selected files, but the command line is built by appending each selected file name at the end; the total number of invocations of the command will be much less than the number of matched files.
So does it wait until it has found all the matches to run the command as a giant batch instead of running it as it finds matches?
So does it wait until it has found all the matches to run the command as a giant batch instead of running it as it finds matches?
almost. it runs the command in batches, if you have few enough files it may only run it once. this shouldn't make it slower, but actually faster.
and yes, linux does not use ACLs by default. ~~on ext4 usage of ACLs is not even enabled by default, but only if you set it up with the right mount option~~
As part of a UX/UI design project for my studies, I’m currently analyzing the user experience and interface of BookWyrm. The goal is to identify areas for improvement while respecting the platform’s core values (decentralization, simplicity, accessibility, etc.).
I’m looking to gather feedback from actual or potential users of the platform. If you have a few minutes, your answers to the questions below would be extremely helpful: - What do you like most about BookWyrm? Which features do you use most frequently? - Are there any features or interactions that you find frustrating or unintuitive? - What features do you think are missing or could be improved? - How do you feel about the interface (design, readability, navigation)? - Do you use BookWyrm (or similar platforms) mainly to manage your personal library (individual use), or to get recommendations, join discussions, and engage with others (social use)? - Do you mainly use BookWyrm on a mobile device or on a computer? And why? - Do you also use other platforms (e.g., Goodreads, StoryGraph, LibraryThing)? If yes, what makes you prefer one over the other? - If you’ve never used BookWyrm, what’s holding you back? And conversely, what might encourage you to use it regularly?
Thank you so much for your input. I’d be happy to share the results of this analysis here if there’s interest.
Discussing a breaking change in Python's setuptools.
The really interesting part is in the discussion section.... and it shows once more how incredibly well-designed the GNU Guix package manager is -- which solves these problems very very well, for arbitrary languages and with a fast growing distribution of, by now, about 50,000 packages.
I don't get that people constantly complain that the Guix project does not distributes or actively supports distribution of binary, propietary software. That is like complaining that Apple does not sells their Laptop with Linux, Microsoft does not sells Google's Chromebooks, or that Amazon does not distribute free eBooks from project Gutenberg, ScienceHub or O'Reilly.
And users can of course use the nonguix channel to get their non-free firmware or whatever, but they should not complain and demand that volunteers of other projects do more unpaid work. Instead, they should donate money or volunteer do do it themselves.
But guess what? I think these complaints come to a good part from companies which want to sell their proprietary software. Valve and Steams show that a company can very well sell software for Linux, with mutual benefit, but not by freeloading on volunteer work.
And one more thing, Guix allows to do exactly what Flatpaks etc. promise: Any company, as well as any lonely coder, team of scientists, or small FLOSS project, can build their own packages founded on a stable Guix base system, with libraries and everything, binary or from source, and distribute it from their own website in a company channel - just like any Emacs user can distribute his own, self-written Emacs extensions from a Web page or Gemini small-net page. And thanks to the portability of the Guix package manager, this software can be installed on any Linux system, resting on a fully reproducible base.
Guix is really making fantastic progress and is a good alternative in the space between stable and fully FOSS distributions, likes Debian, and distributions which are more up-to-date, like Arch.
And one interesting thing is that the number of packages is now so large that one can frequently install additional more recent packages on a Debian systems, or ones that are not packaged by Debian.
For example, I run Debian stable as base system, Guix as extra package manager (and Arch in a VM for trying out latest software for programming).
The thing is now Guix often provides more recent packages tham Debian, like many Rust command line tools, where Debian is lagging a bit. There are many interesting ones, and most are recent because Rust is progressing so fast. Using Guix, I can install them without using the language package manager, regardless whether iy is written in Rust, Go, or Python 3.13.
Or, today I read an article about improvements in spaced repetition learning algorithms. It mentioned that the FLOSS software Anki provided it, and I became curious and wanted to have a look at Anki. Well, Debian has no "anki" package - and it is written, among other languages, im Python and Rust, so good luck getting it on Debian stable. But for Guix, I only had to do "guix install anki" and had it installed.
This works a tad slower than apt-get ... but it still saves time compared to installing stuff and dependencies manually.
hi my dears, I have an issue at work where we have to work with millions (150 mln~) of product data points. We are using SQL server because it was inhouse available for development. however using various tables growing beyond 10 mln the server becomes quite slow and waiting/buffer time becomes >7000ms/sec. which is tearing our complete setup of various microservices who read, write and delete from the tables continuously down. All the stackoverflow answers lead to - its complex. read a 2000 page book.
the thing is. my queries are not that complex. they simply go through the whole table to identify any duplicates which are not further processed then, because the processing takes time (which we thought would be the bottleneck). but the time savings to not process duplicates seems now probably less than that it takes to compare batches with the SQL table. the other culprit is that our server runs on a HDD which is with 150mb read and write per second probably on its edge.
the question is. is there a wizard move to bypass any of my restriction or is a change in the setup and algorithm inevitable?
edit: I know that my questions seems broad. but as I am new to database architecture I welcome any input and discussion since the topic itself is a lifetime know-how by itself. thanks for every feedbach.
What? Problems like this usually come down to some missing indexes. Can you view the query plan for your slow queries? See how long they are taking? IDK about SQL Server but usually there is a command called something like ANALYZE, that breaks down a query into the different parts of its execution plan, executes it, and measures how long each part takes. If you see something like "FULL TABLE SCAN" taking a long time, that can usually be fixed with an index.
If this doesn't make any sense to you, ask if there are any database gurus at your company, or book a few hours with a consultant. If you go the paid consultant route, say you want someone good at SQL Server query optimization.
By the way I think some people in this thread are overestimating the complexity of this type of problem or are maybe unintentionally spreading FUD. I'm not a DB guru but I would say that by now I'm somewhat clueful, and I got that way mostly by reading the SQLlite docs including the implementation manuals over a few evenings. That's probably a few hundred pages but not 2000 or anything like that.
First question: how many separate tables does your DB have? If less than say 20, you are probably in simple territory.
Also, look at your slowest queries. They likely say SELECT something FROM this JOIN that JOIN otherthing bla bla bla. How many different JOINs are in that query? If just one, you probably need an index; if two or three, it might take a bit of head scratching; and if 4 or more, something is possibly wrong with your schema or how the queries are written and you have to straighten that out.
Basically from having seen this type of thing many times before, there is about a 50% chance that it can be solved with very little effort, by adding indexes based on studying the slow query executions.
First question: how many separate tables does your DB have? If less than say 20, you are probably in simple territory.
Currently about ~50. But like 30 of them are the result of splitting them into a common column like "country". In the beginning I assumed this lead to the same as partitioning one large table?
Also, look at your slowest queries
The different queries itself take not long because of the query per se. but due to the limitation of the HDD, SQL reads as much as possible from the disk to go through a table, given that there are now multiple connections all querying multiple tables this leads to a server overload. While I see now the issue with our approach, I hope that migrating the server from SQL server to postgreSQL and to modern hardware + refactoring our approach in general will give us a boost.
They likely say SELECT something FROM this JOIN that JOIN otherthing bla bla bla. How many different JOINs are in that query?
Actually no JOIN. Most "complex" query is INSERT INTO with a WHEN NOT EXIST constraint.
But thank you for your advice. I will incorporate the tips in our new design approach.
You really have to see what the db is doing to understand where the bottlenecks are, i.e. find the query plans. It's ok if it's just single selects. Look for stuff like table scans that shouldn't happen. How many queries per second are there? Remember that SSD's have been a common thing for maybe 10 years. Before that it was HDD's everywhere, and people still ran systems with very high throughput. They had much less ram then than now too.
With 8 GB of RAM and 5500 CPU passmark points, that's a good laptop for Linux Mint. Download their "edge" version of Mint, so you get the latest kernel (so it has more chances of supporting 100% that laptop).
GNOME Shell and Mutter had been covered by Ubuntu's GNOME MicroReleaseException 'MRE' policy that allows for new point releases to ship rather easily as stable updates to existing Ubuntu Linux releases
Linux hit 4% desktop OS marketshare not too long ago. But it's still far away from competing with Windows or macOS. Question is - how do you make Linux more ...
I just fucking can't with windows anymore. I'd preach about it but I imagine you've heard it all. I have minimal computer expertise.
I use my PC mainly for streaming, downloading torrent files who's copyright you don't need to worry about, and light gaming. Usually just messing with New Vegas mods.
If someone knows of a good YouTube channel or guide or something written for andelder millennial caveman I would be grateful.
Edit: after having been recommended mint OS and giving it a quick Google, I got this! I haven't fucked with anything linux scince the early aughts. And holy shit has that come a ways. Guess I remembered back and got a little intimidated. Mint is downloading now. As a small f.u. I booted up edge to do it. Ty you beautiful people!
One of the real downsides of ARM is, it seems, the relative lack of standardization. An x64 kernel? It'll run on most anything from the last ten years at least. And as for boot process, it's probably one of two options (and in many cases one computer can boot either legacy or EFI).
ARM, on the other hand...my raspberry pi collection does one thing, my Orange Pi does something else, and God help you if you want to try swapping the Orange kernel for the Raspberry (or vice versa)!
If the system is SystemReady then the EFI boot chain is fairly straightforward now. My current workstation just booted off the Debian usb installer like any other pc.
It's a weird time to live in, but not confusing. It's obvious to see that what you really want as a vendor is control over the operating system stack itself, and relying on Microsoft has become challenging.
In essence what NVIDIA is doing is bringing it's entire GPU driver stack open source side, so that entire industries say go on buying tons more hardware.
Us Linux enthusiasts get to reap the benefit, what with entire open source movements bringing libraries to Linux side first that can turn GPU hardware into whatever tool you'd like. Projects like PyTorch and ffmpeg run as first class citizens on Linux.
Windows still relies on either shared DotNet stack (which will make a monkey out of you - cough cough) or the nearly ancient MSYS2 build environment. Microsoft of course prefers you run all that software inside their Linux container system known as WSL - and there's a reason for that.
The Linux graphics stack is looking more "feature complete" by the month, bringing up the question of where you actually get the best hardware support. This is a good question to have.
Now, if only the open source desktop movements could clean house, figure out funding and get their stacks in order, we might finally, for the umpteenth time, maybe see the year of the Linux desktop.
I grow old with anticipation, but seeing what NVIDIA did in the before time versus what they do in the now puts a smirk on this haggered face.
It’s an Ubuntu downstream maintained by Linux box maker System76 which is targeted for both general usability and design/media applications. They will soon be debuting their own home-spun desktop environment, Cosmic DE, which is highly anticipated by the Linux community.
How does the community here feel about this distribution and the company that has brought it to us? How do you feel about the projects that they’re working on, and their goals for the distribution moving forward?
A semi-rolling distribution, with access to Ubuntu's many PPA's, and easily removable extensions that reveal the lovely vanilla Gnome experience, it's great!
Also they are making a Rust desktop, which I am currently running, though not daily driving.
Don't worry, you're not missing out on much, running video games, or any OpenGL thing including 2D games and GPU-accelerated terminal emulators is a bad experience, and alt+f4 isn't implemented, and f11 to fullscreen is janky, and theming for buttons and such is clearly alpha.
The promise of an Arabic-supporting, Rust based, GPU-accelerated terminal is too attractive, however, as I was teared between multilingual terminal, Wezterm, Alacritty and Kitty for a while.
The first is horrible at everything but supporting languages, the second is really janky, the third doesn't support tabs, the fourth has bad theming and customization.
The Stellaris 17 from TUXEDO is a new refreshed (their sixth version) high-powered desktop-replacement notebook, with a high price and a tease of more models in this series to come.
I am currently on win10 but have been toying with mint and liking it. I intend on fully switching over soon. I have also been toying with the idea of some simple 3D modeling, like making custom parts for projects around my house. Maybe using a CAD software to generate stls for a 3D print or using it to spec out parts for a design made out of aluminum extrusion (like 8020) little things like that. I was thinking about getting a solidworks hobbyist license for 45 a year but solidworks doesn't support Linux. I could keep a Windows dual boot HDD, but fuck that. Any suggestions on a CAD software that fits? Have a gaming PC with a 3060 and some beefy hardware.
Any "How To" that doesn't just use Rufus isn't worth the page its text is rendered on. Rufus can do Linux boot disks, but is indispensable for Windows boot disk utilities. It's one of the only ways I know of to make a Windows ToGo installation (equivalent of a Linux Live USB), which I used to install Windows on a friends SD card for their Steam Deck so they can dual-boot.
I'm thinking about building a desktop with one of my kids and I would really prefer to put Linux on it. My wife is not a fan of the idea, however.
I'm wondering are there any good Linux distros/utilities for children that include parental control features and things like that? And that are easy to use for a child who has only used basic Chromebooks in the past?
I abhor the idea of things made "for kids". I learned to program when I was 10 on a Commodore 64. And we would wear an onion on our belt which was the style at the time.... Sorry, where was I?
I'd just install a normal distro. Let the kiddo break shit and learn to fix it. Keep backups for recovery and probably isolate the system on your network for if/when kiddo does something stupid. Talk about security, being responsible, etc. We learn through mistakes not by playing in safe walled-gardens.
KDE System Monitor and the like have easy ways of monitoring how many bits per second are going in and out of your storage at a given time, is there anything similar for memory?
(ok i see, you're using the term CPU colloquially to refer to the processor. i know you obviously know the difference & that's what you meant - i just mention the distinction for others who may not be aware.)
ultimately op may not require exact monitoring, since they compared it to standard system monitors etc, which are ofc approximate as well. so the tools as listed by Eager Eagle in this comment may be sufficient for the general use described by op?
eg. these, screenshots looks pretty close to what i imagined op meant
now onto your very cool idea of substantially improving the temporal resolution of measuring memory bandwidth...you've got me very interested with your idea 😀
my inital sense is counting completed L3/4 cache misses sourced from DRAM and similar events might be alot easier - though as you point out that will inevitably accumulate event counts within a given time interval rather than an individual event.
i understand the role of parity bits in ECC memory, but i didn't quite understand how & which ECC fields you would access, and how/where you would store those results with improved temporal resolution compared to event counts?
would love to hear what your setup would look like? 😀 which ECC-specific masks would you monitor? where/how would you store/process such high resolution results without impacting the measurement itself? details pls 😁
I've gathered that a lot of people in the nix space seem to dislike snaps but otherwise like Flatpaks, what seems to be the difference here?
Are Snaps just a lot slower than flatpaks or something? They're both a bit bloaty as far as I know but makes Canonicals attempt worse?
Personally I think for home users or niche there should be a snap less variant of this distribution with all the bells and whistles.
Sure it might be pointless, but you could argue that for dozens of other distros that take Debian, Fedora or Arch stuff and make it as their own variant, I.e MX Linux or Manjaro.
HeliBoard keyboard is an improved fork of the now-unmaintained OpenBoard keyboard. It does not require internet permission, allowing it to be used 100% offline.
Features
Add dictionaries for suggestions and spell check
Build your own, or access them here, or in the experimental section (quality may vary)
Additional dictionaries for emojis or scientific symbols can be used to provide suggestions (similar to "emoji search")
Note that for Korean layouts, suggestions only work using this dictionary; the tools in the dictionary repository cannot create working dictionaries
Customize keyboard themes (style, colors, and background image)
Can follow the system's day/night setting on Android 10+ (and on some versions of Android 9)
Can follow dynamic colors for Android 12+
Customize keyboard layouts (only available when disabling system languages)
Multilingual typing
Glide typing (only with closed-source library ☹️)
Library not included in the app, as there is no compatible open-source library available
Can be extracted from GApps packages ("swypelibs"), or downloaded here
Clipboard history
One-handed mode
Split keyboard (only available if the screen is large enough)
Number pad
Backup and restore your learned word/history data
Hidden Functionality
Features that may go unnoticed, and further potentially useful information
Long-pressing the Clipboard Key (the optional one in the suggestion strip) pastes system clipboard contents.
Long-pressing keys in the suggestion strip toolbar pins them to the suggestion strip.
Long-press the Comma-key to access Clipboard View, Emoji View, One-handed Mode, Settings, or Switch Language:
Emoji View and Language Switch will disappear if you have the corresponding key enabled;
For some layouts, it's not the Comma-key, but the key at the same position (e.g. it's q for Dvorak layout).
When incognito mode is enabled, no words will be learned, and no emojis will be added to recents.
Sliding key input: Swipe from shift or symbol key to another key. This will enter a single uppercase key or symbol and return to the previous keyboard.
Hold shift or symbol key, press one or more keys, and then release shift or symbol key to return to the previous keyboard.
Long-press a suggestion in the suggestion strip to show more suggestions, and a delete button to remove this suggestion.
Swipe up from a suggestion to open more suggestions, and release on the suggestion to select it.
Long-press an entry in the clipboard history to pin it (keep it in clipboard until you unpin).
Swipe left in clipboard view to remove an entry (except when it's pinned)
Select text and press shift to switch between uppercase, lowercase, and capitalize words
You can add dictionaries by opening the file
This only works with content-uris and not with file-uris, meaning that it may not work with some file explorers.
Debug mode / debug APK
Long-press a suggestion in the suggestion strip twice to show the source dictionary.
When using debug APK, you can find Debug Settings within the Advanced Preferences, though the usefulness is limited except for dumping dictionaries into the log.
For a release APK, you need to tap the version in About several times, then you can find debug settings in Advanced Preferences.
When enabling Show suggestion infos, suggestions will have some tiny numbers on top showing some internal score and source dictionary.
In the event of an application crash, you will be prompted whether you want the crash logs when you open the Settings.
When using multilingual typing, the space bar will show a confidence value used for determining the currently used language.
For users doing manual backups with root access: Starting at Android 7, some files and the main shared preferences file are not in the default location because the app is using device-protected storage. This is necessary so the settings and layout files can be read before the device is unlocked, e.g., at boot. The files are usually located in /data/user_de/0//, though the location may depend on the device and Android version.
Planned features and improvements:
Customizable functional key layout
Will likely result in having the same functional key layout for alphabet and symbols layouts
A slew of modernisation are set to ship in next version of Linux Mint, which will be based on Ubuntu 24.04 LTS. First up, Linux Mint 22 will switch to using Pipewire as its default […]
After repeatedly suffering issues with scam apps making it onto the Snap Store, Canonical maker of Ubuntu Linux have now decided to manually look over submissions.
Alt Text: A screenshot of the tab bar and address bar of Firefox where twelve different fediverse websites are pinned. There is a new DuckDuckGo search being made in the address bar saying, "I think I might have a problem."
The 12 services are Mastodon, Glitch Edition, Misskey, IceShrimp, Akkoma, Friendica, Lemmy, Kbin, PieFed, Pixelfed, BookWyrm, and PeerTube.
I have many nerdy friends who have been Linux users for ages. But most of them don't know such a thing as Openwrt exists or have never bothered to give it a try. It's a very fun piece of software to play with and can be extremely useful for routing traffic. Wondering why it isn't more popular/widely used.
I've used OpenWrt, DD-WRT, and Tomato firmware on the various routers I've had. I don't think I've ever kept the stock firmware on any router I've owned.
I use pfSense at home now, but I've been considering switching to OPNsense. I still run OpenWrt on a portable router that I use when I'm traveling though. I won't ever buy a router that I can't run open source firmware on.
I am from india. These numbers are inflated due to our population and government and health sector office pc using linux (ubuntu). These office pcs just require a chrome browser and all the work is done on the browser Nobody here cares what os they use in their office pc. I don't see anyone here switching to linux on their personal pc other than the IT students who are forced to install kali linux. And most of them are running linux on virtualbox on windows.
Steam deck is not even officially sold here and imported ones that are sold cost 950$ for the 512 gb variant. So it is a ultra niche item here. .
People here buy desktops only for gaming/content creation, which means most households here doesn't need/require a desktop. And these people always prefer mac or windows.
Also gaming scene here is dominated by mobile games (because gaming pcs and consoles are too expensive and we have the cheapest internet and phone prices) As for pc games it is dominated by valorant, Minecraft and gtav (fivem rp).
Edit - Many consider this a huge win. But getting market share in the office space for basic browsing and word processing inflates the numbers for actual game/app developers who wants to support linux and they will disappointed seeing the actual usage and they will abandon the linux support. Also the indian market isn't buying laptop/desktops for browsing, they just use their phone because pc hardware is expensive and phones prices are cheap. And anyone who is buying desktops for serious tasks stick to windows and mac.
The Fediverse has been known to ban anyone who supports Musk's rhetoric as well as anyone who is registered with KF. I speak from experience with seeing a certain someone (dare we say whom?) being banned from multiple instances for being a KF user. She made it more than happenstance to rigidly adhere to the instance's rules. Perhaps there are unwritten rules within the Fediverse regarding alignment with the website I alluded to? Reaching out as a concerned lemming.
She only got banned because she was trying to make it seem like the harm Kiwi Farms did was minimal. Which is an obvious lie, Kiwi Farms is one of the biggest hives of villiany and scum; they've done so much harm to those they didn't like for petty reasons. Particularly going after trans people and piling an unending torrent of harassment on them until they either kill themselves or go beyond the reach of Kiwi Farms. Proof of my claim that Kiwi Farms caused harm to the Trans community
She tried to conflate Discord unknowingly hosting mass shooters with being their allies. (I noticed said something along the same lines, as you were trying to take the heat off of Kiwi Farms, sussy). That makes me wonder if this account is a sockpuppet, but I can't say for certain, as there isn't proof of that.
Statcounter, a website that tracks the market share of web browsers, operating systems, and search engines, is reporting that Linux on the desktop has over 4% market share for the very first time (Statcounter records ChromeOS as a separate operating system despite being based on Linux). Statcounter doesn’t provide any explanation about why the market share has increased but we can speculate what’s going on.
Linux’s march to its 4.03% market share has been a steady process ever since the final months of 2020 when Linux held just 1.53% of desktop market share. One of the biggest contributors to the growth of Linux is likely the stringent hardware requirements of Windows 11.
Statcounter is reporting that Linux on the desktop has surpassed 4% of market share compared to just 1.53% in October 2020. The reasons for the increase aren't known but we speculate about the cause.
With the Linux 6.15 kernel expected to be released as stable on Sunday unless Linus Torvalds has last-minute reservations, here's a look back at some of the most interesting Linux 6.15 changes.
AMD CPU improvements like INVLPGB for broadcast TLB invalidation, Zen 5 load latency filtering with perf, AMD P-State driver improvements, initial support for the AMD Versal NET SoC, and more.
Intel
On the Intel side is early work on the kernel-side preparations for Advanced Performance Extensions (APX) and continuing to enhance the Trust Domain Extensions (TDX) support.
CPU
For both Intel and AMD there is also crypto performance improvements like faster CRC code for AVX-512 CPUs and faster AES-CTR with modern x86_64 CPUs.
Graphics
Over on the graphics side there is the very preliminary NOVA driver code merged for the future Rust-written open-source NVIDIA kernel driver. Linux 6.15 also brings Shared Virtual Memory support for the Intel Xe driver, standardized reporting to user-space for hung GPUs, Intel Xe EU stall sampling, AMDGPU support for the OEM i2c interface for RGB lighting and more, and AMD Radeon RX 9070 series fan speed reporting.
Bcachefs
Linux 6.15 also brings many enhancements to the Bcachefs file-system as it works on its "soft frozen" state and working to remove the "experimental" flag from the file-system in the not too distant future.
Other
Some other fun enhancements to Linux 6.15 include IO_uring network zero-copy receive, the new FWCTL subsystem, various Apple driver enhancements, MSEAL protection of system mappings, the new "hugetlb_alloc_threads" option to help boot times on large servers, various kernel scheduler improvements, continued work on Rust programming language abstractions, and landing the Zstd 1.5.7 compression code into the kernel.
Not the first time this has happened, but recently the Snap store from Canonical hosted a scam bitcoin app that claimed to be "Exodus wallet" that caused a user to lose money.
Over the weekend, hackers targeted federated social networks like Mastodon to carry out ongoing spam attacks that were organized on Discord, and conducted
I've been an IT professional for 20 years now, but I've mainly dealt with Windows. I've worked with Linux servers through out the years, but never had Linux as a daily driver. And I decided it was time to change. I only had 2 requirements. One, I need to be able to use my Nvidia 3080 ti for local LLM and I need to be able to RDP with multiple screens to my work laptop running Windows 10.
My hope was to be able to get this all working and create some articles on how I did it to hopefully inspire/guide others. Unfortunately, I was not successful.
I started out with Ubuntu 22.04 and I could not get the live CD to boot. After some searching, I figured out I had to go in a turn off ACPI in boot loader. After that I was able to install Ubuntu side by side with Windows 11, but the boot loader errored out at the end of the install and Ubuntu would not boot.
Okay, back into Windows to download the boot loader fixer and boot to that. Alright, I'm finally able to get into Ubuntu, but I only have 1 of my 4 monitors working. Install the NVIDIA-SMI and reboot. All my monitors work now, but my network card is now broken.
Follow instructions on my phone to reinstall the linux-modules-extra package. Back into Windows to download that because, you know, no network connections. Reinstall the package, it doesn't work. Go into advanced recovery, try restoring packages, nothing is working. I can either get my monitors to work or my network card. Never both at the same time.
I give up and decide it's time to try out Fedora. The install process is much smoother. I boot up 3 of 4 monitors work. I find a great post on installing Nvidia drivers and CUDA. After doing that and rebooting, I have all 4 monitors and networking, woohoo!
Now, let's test RDP. Install FreeRDP run with /multimon, and the screen for each remote window is shifted 1/3 of the way to the left. Strange. Do a little looking online, find an Issue on GitHub about how it is based on the primary monitor. Long story short, I can't use multiple monitor RDP because I have different resolution monitors and they are stacked 2x2 instead of all in a row. Trust me I tried every combination I could think of.
Someone suggested using the nightly build because they have been working on this issue. Okay, I try that out and it fails to install because of a missing dependency. Apparently, there is a pull request from December to fix this on Fedora installs, but it hasn't been merged. So, I would need to compile that specific branch myself.
At this point, I'm just so sick of every little thing being a huge struggle, I reboot and go back into Windows. I still have Fedora on there, but who would have thought something that sounds as simple as wanting to RDP across 4 monitors would be so damn difficult.
I'm not saying any of this to bag on Linux. It's more of a discussion topic on, yes, I agree that there needs to be more adoption on Linux, but if someone with 20 years of IT experience gets this feed up with it, imagine how your average user would feel.
Of course if anyone has any recommendation on getting my RDP working, I'm all ears on that too.
I read the first paragraph and saw your prerequisites included working with nvidia.
That is a non-starter, right there. You can blame Linux for a whole lot of little flaws, but most of the blame should go to your hardware vendor for providing shitty support for Linux.
With modern CPU's supposedly shipping with 'AI cores': How long do you think it will take for a proper opensource, privacy respecting productivity tools(Something like whatever M$ copilot is supposed to be?) to be available?
Personally, i would love to see something like 'Passive' OCR integrated with the display server: the ability to pause any video and just select whatever text(even handwritten) there is naturally like it was a text document without any additional hassle will be really useful Also useful in circumventing any blocks certain websites put on articles to prevent text from being copied
Or an AI grammar checker running natively for LibreOffice.
What are some AI tools you think should be developed for desktop Linux?
Some of the AI related apps I've been using that are both Free Software and offline (where it runs on your computer without using network services in the cloud) are:
OCR: "Frog" can take screenshots, select images, accept drag and drop, and you can paste an image from the clipboard. It'll read the text on the images and immediately have a text area with the result. flathub.org/apps/com.github.te… — it's powered by Tesseract. Note: The completely optional text-to-speech that Frog has does use an online service. But the rest is offline.
Speech to text: "Speech Note" does text to speech, speech to text, and translations... all locally on your computer, and it supports GPU acceleration (which isn't needed, but it makes it a little faster). flathub.org/apps/net.mkiol.Spe… — This is basically the all-in-one "Swiss army knife" of ML text processing. Thanks to being a Flatpak, you don't have to do anything special for the dependencies. It's all taken care of for you. It also has tons of different models (for different voices, different backends) all available from within the UI, which just needs a click for downloading.
Upscaling images: There are two that do something similar, using some of the same backends. A nice and simple one is "Upscaler". flathub.org/apps/io.gitlab.the… Another one that's cross platform is "Upscayl" flathub.org/apps/org.upscayl.U… — these both use ESRGAN and Waifu2x in the background.
Closed captioning: "Live Captions" uses an ML model to transcribe text realtime. It's wonderful for when a video doesn't have subtitles, or when you're participating in a video call (which might also not have CC). There's also a toggle mode that will transcribe based on microphone input. The default is to use system audio. flathub.org/apps/net.sapples.L…
Web page translations: Firefox, for the past few releases, has the ability to translate web pages completely local in-browser. It does need to download a small model file (a quantized one around 20 megabytes per language pair), but this happens automatically on first use. All you need to do is click the translate icon (when it's auto-detected) or go to the menu and select "Translate page...". Firefox is located in your distribution already (and is usually installed by default in most Linux distributions) and is available as an official package from Mozilla on Flathub as well. Newer versions keep improving on this, improving speed (it's pretty quick already), improving accuracy, improving reliability (sometimes you have to try to translate a couple of times on some pages), and adding languages. But what's there in the release of Firefox is already great.
Chat and image generation (more advanced)
While all the above are graphical apps and on Flathub (some may have distro packages too), there are some additional AI/ML things you can run on Linux as well:
Chat ML: "Ollama" (ollama.ai/) is a friendlier wrapper around llama.cpp and lets you run a variety of models (some FOSS, some just source-available-and-gratis, some not at all).
You can run Ollama in a container to make it even easier. Even a Podman container on your user account works. (You don't need to set it up as a system container.) The instructions for Docker work on Podman (just swap the docker command for podman instead).
While the official instructions only list CPU (which is fine for some of the smaller models) and NVidia, it's also possible to use an AMD GPU too:
# Enable device as user (run once per boot)
sudo setsebool container_use_devices=true
# Set up the ollama server for AMD acceleration (run once per session)
podman run --pull=always --replace --detach --device /dev/kfd --device /dev/dri --group-add video -v ollama:/root/.ollama -p 11434:11434 --name ollama ollama/ollama:0.1.22-rocm
# Command-line interaction (run any time you want to use it — the last part is which model you want to use)
podman exec -it ollama ollama run llama2
llama2 is the default ML; there are so many others available. Mixtral is a good one if you have enough vram on your GPU. Whatever you specify, it will auto-download and set it up for you. You only need to wait the first time. (The ROCm version of takes a while to download. Each model varies. The good thing is, it's all cached for subsequent uses.)
If you want a web UI like ChatGPT, then you could also run this instead of the command line interaction command:
When done, run podman stop ollama and podman stop ollama-webui to free up resources from your GPU.
There are also integrations for text editors and IDEs, similar to GitHub's CoPilot. Neovim has a few already. VS Code (or VS Codium) has some too (like twinny and privy).
Image generation: "Stable Diffusion" is the go-to here. There are a bunch of forks. Some of the better ones are:
"Fooocus" github.com/lllyasviel/Fooocus/ — an easy to use streamlined app (with some advanced settings) where you don't need to prompt as much or tweak settings to get a good result by default.
"SD.next" github.com/vladmandic/automati… — A fork of the Automatic111 fork of the default Stable Diffusion web app that uses the Gradio UI.
"ComfyUI" github.com/comfyanonymous/Comf… — A node-based UI for Stable Diffusion. ...and there are a ton others. Forks of forks of forks.
Krita, GIMP, and Blender all have plugins that can interface with some of these too (usually using a SD Automatic111 API).
For Stable Diffusion on AMD, you need to have ROCm installed and might need to set or use an environment variable to make it work with your card. Something like: HSA_OVERRIDE_GFX_VERSION=11.0.0 or HSA_OVERRIDE_GFX_VERSION=10.3.0 (depending on your GPU). Prefixing means just putting that at the beginning of the the command with a space and then the rest of the command. Setting it as a variable depends on your shell. You might need to export it for some (like for bash). Prefixing it is fine though, especially when you use ctrl+r to do a substrang search in your shell history (so you don't need to retype it or remember silly-long commands).
As using these image generating apps pulls down a lot of Python libraries, I'd suggest considering setting up a separate user account instead of using your own, so the app doesn't have access to your local files (like stuff in ~/.ssh/, ~/.local/, your documents, etc.). Setting up containers for these is not so easy (yet), sadly. Some people have done it. And they do run in a toolbox or distrobox podman container... but toolbox and distrobox containers don't really contain so much, so you're better off using podman (with a "docker" container) directly or running it as a separate account for some type of isolation from your user account files.
There are some graphical apps on Flathub for connecting to Stable Diffusion and a ChatGPT AI (which ollama now has)... but in the course of setting them up, you basically have a web and/or text-based UI to interact with.
There where Times when Ubuntu was Marks baby, but nowadays with pro, advertisement and tracking in the terminal an AppStore, everything has to have a businesscase.
I would recommend just plain Debian either with flatpak or in the testing branch. It's almost the same, stable as a rock and driven by a community.
I jumped ship from Ubuntu to fedora last year and fedora is awesome. Fedora has a bit newer packages and the default felt right (albeit I missed system tray plugin from Ubuntu). Some hardware work better OOTB on Ubuntu, so always try with a live distro first.
*Please read the whole text before commenting. (There are some passages where you might want to add something, because you didn't see that it's written in a different passage.) If you read alll of it, I'm open for custructive feedback and hope there will be a constructive discussion. There was a similiar post some time ago: feddit.org/post/10309044*
I not only recently had to watch a painful infight evolving in Lemmy's comment sections. Discussions which weren't real discussions anymore and felt like an endless comment fight of people who usually have so much in common.
I think I speak for most of Lemmy if I say the following:
Fascism is on rise around the world, has grabbed power in the United States of America and threatens all of us. We –mostly leftists– were able to create a democratic oasis of digital solidarity among like-minded people. A place where everyone can raise their voice, without getting suppressed by our worst digital enemy: BigTech, a tool and puppet of global fascism. For being threatened by fascism, you don't even have to be a leftist, nor a highly political person at all, all that matters is to believe in democracy. All democrats are welcome, no matter what political attitude they have, we are united by democracy. We are people of all genders, ages, nationalities, languages and religions, agnosticism or atheism. Everyone can talk freely about every topic, as long as one accepts other opinions (may even change their own opinion) and shares the spirit of democracy and consideration. We built this oasis, we are united by democracy, antifascism, freedom, tolerance and independence.
------------------------------------------------
And still we can't stop fighting against each other? No one here supports the rise of what hates this great community. We should stand together and share the spirit described. We certainly do to some extent, but every time we don't and instead of discussing start fighting against each other, the fascists will jump for joy, since we support their rise. To based on facts discuss topics together is essential for us, it also is fascism's worst enemy. But to verbally tear us apart is fateful, it is one of fascism's best friends. What divides us the most is something we have the least power to change. It's the ongoing war in Gaza. The Middle East conflicts have divided the minds of leftists/democrats like us for decades and since October 7th, 2023, one of them does even more. Everyone has their own opinion, it's the way of democracy. Every democrat really interested in a discussion should be allowed to communicate their position. As democrats, we should discuss this topic. But let's not do it in a way that makes fascists to triumph and us to peter out in an endless fight regarding this topic which we can't really change. There are so many topics we could influence, one of the most obvious being to be a digital alternative to BigTech's platforms.
Generally:
The most important Usenet-rule for us: Don't feed the troll. If it's obvious that your discussion partner doesn't want to discuss constructively, don't answer. The most obvious trolls are those with accounts younger than a week (sometimes just insulting). If such an account appears in a discussion: Ignore + report. It might be a good idea to check the account age before discussing with someone.
What seems obvious is to argue in good faith.
Do not insult anybody, it won't help you nor anybody else. No lemmy user is a nazi/etc. At least I didn't see one so far. If you want to insult a lemmy user e.g. as nazi, first calm down, maybe wait some time before responding. If you still want to insult this user, it definitely is the better choice to ignore that user. Calling someone a nazi or insulting in another way is nothing that will help us in any sense. If a user actually advocates nazi ideas, it is a troll. If you want to start insulting: Don't do it. If it's a troll: Don't respond, don't feed it, just report it and shut up.
Please (!) use sources. If you state something which isn't your opinion or an obvious fact, don't say "Uh, I heard it somewhere", but name a reliable source.
If there's already an ongoing discussion between two users, only join it if you have something important to say. It's not very helpful if there are four people discussing with one person at the same time.
Now to Middle East:
What we should definitely agree on is the meaning of "Zionism". The simple definition I have in mind is: Zionism is to advocate for the foundation of a Jewish national state (as a result of the Jewish experiences during the holocaust and centuries of persecution) and thus the approval for Israel to exist (which is one of the two conditions we need for a 2 state solution). That's the most common German definition, but it doesn't really fit e.g. the US-American definition. We might distinguish between zionism and neo-zionism, etc. German "Zionismus" does NOT mean killing all non-Jews on the territory you want to establish your state. If we can't find a solution, at least keep in mind that Zionism is defined differently by different people and maybe ask the person you're discussing with, what they mean by "Zionism". I saw way to many arguments among fellow lemmings who just had different definitions of Zionism and weren't aware that their counterparts didn't have the same definition.
Another difference: Comparing some genocide like the current one in Gaza to the Holocaust/Shoa may be a different thing outside of Germany. But from a German perspective: Claiming some genocide to be like the holocaust is to trivialise the holocaust. Hear me out. The holocaust was exactly one genocide during nazi Germany's 12 years, an industiralized and detailly plannend murdering of more than 6 million people. A genocide with so many victims hasn't happend again and since nazi Germany conducted it, Germans are especially aware of the holocaust. There are no "holocausts", because it's just this single event. Holocaust remembrance isn't about ranking human suffering, it's about preserving the truth of a uniquely horrifying event so that it is never repeated — in its actual form. If you compare the holocaust and some other genocide, then the holocaust starts to be just one genocide among many others. And there's not even need for comparing them. Every genocide is a tragedy, every death. At the same time, actual German neo-nazis and/or antisemites constantly try to trivialise the holocaust, also by comparing it to other genocides or comparing the millions of German deaths during the second world war. German source. For the reasons described, most Germans (myself included) do not compare the holocaust with anything else and perceive comparsions as antisemitic. Outside of Germany this perspective doesn't seem to be shared. But now you might understand why comparsions are perceived like that by Germans. If it's forbidden in German communities to compare holocaust and Gaza, it's not because criticizing the genocide in Gaza isn't allowed. Criticizing this current genocide of course is allowed, just comparsions to the holocaust aren't.
And more concrete for the current war in Gaza, I hope we can find an agreement on the following, I copied the first part (1-49) from here and edited some minor sentence-parts.
Some Jews are shitty and awful people.
Some Muslims are shitty and awful people.
Some Christians are shitty and awful people.
Some Arabs are shitty and awful people.
Some Americans are shitty and awful people.
Some Israelis are shitty and awful people.
Some Palestinians are shitty and awful people.
Not all Jews are Israelis.
Not all Israelis are Jews.
Not all Jews are white.
Not all Israelis are white.
Not all Muslims are Arabs.
Not all Arabs are Muslim.
Not all Palestinians are Muslim.
Not all Arabs are Palestinian.
Not all Palestinians are Hamas.
Texans are not Arizonans.
Germans are not Dutch.
Palestinians are not Jordanians.
Egyptians are not Palestinians.
Where you are born does not actually determine anything about you.
Israeli governments have committed acts of terror and violence [=> ongoing genocide] against the Palestinian people.
Palestinian organizations have committed acts of terror and violence against the Israeli people.
US leaders do things that we do not agree with (Trump).
Israeli leaders do things that Israelis do not agree with.
Palestinian leaders do things that Palestinians do not agree with.
What happened to the Israeli civilians on 10/7 is fucking awful, and Hamas has earned every fucking thing that the Israeli military throws at them. [This point is about Hamas, not the genocide. Hamas supresses the Palestinian people and doesn't care about them dying, but it's still genocide by Israel which uses the Hamas as excuse. Hamas has earned it, but the civilians are victims of a genocide.][I personally just advocate for peace, but fine.]
What is happening in Gaza to civilians is fucking awful, and not the smartest thing for Israel to do, and some aspects of Israeli military activity ~~may be~~ are war crimes, and it doesn’t have to be genocide for it to be tragic. [As far as I know, meanwhile several international organisations like UN have declared it a genocide, so that part is obsolete.]
You can advocate for Palestine without being a racist, antisemitic piece of shit.
You can advocate for the existence of Israel and some of its actions without being a racist, anti-Arab piece of shit. You can also call the current Israeli government right-wing nationalists since that's a tenable opinion.
People like to have sex with each other, and they sometimes procreate with people outside their tribes.
No one in the Levant is indigenous. Every fucking empire in history has fucked their way through the Levant. There is no pure indigeneity. And let’s be honest: the entire planet has been colonized by hominids from the Great Rift Valley.
Palestinians and Israelis share paternal Bronze-Age DNA. Yes, even Ashkenazi Jews.
Stop with the fucking history lessons about what the Israelites did, or what the Ottomans did, or what the British did, or whatever. IT IS FUCKING IMMATERIAL. There is a pile of dog shit in the living room. Instead of arguing about whose dog took the bigger shit in the living room, maybe focus on how we clean up the dog shit.
Any people have a right to group together and self-identify as whatever-the-fuck-they-want-to-self-identify as. When they get large enough as a group, those people have the right to self-determination and self-respect and a state where they can control their own destinies.
Whether you like the idea or not, the Israeli state exists. It will also continue to exist until the ISRAELI PEOPLE decide they don’t want it to exist. Your opinion on this matter (if you are not Israeli) is fucking immaterial.
Whether you like the idea or not, a Palestinian state will exist at some point, and it will continue to exist until the PALESTINIAN PEOPLE decide they don’t want it to exist. Your opinion on this matter (if you are not Palestinian) is fucking immaterial.
You cannot bomb a people into true submission — the Blitz did not ‘soften’ British morale.
You cannot fight a war and kill a people’s desire for safety, freedom, and self-determination. You can stifle it. You can try to ignore it, but one way or another, you will have to deal with it. This is as true for my Israeli friends as it is for my Palestinian ones.
The solution to the Middle East conflict will not be found on Threads, or TikTok, or [Lemmy or] in the streets of any city that isn’t within a 2-hour car ride from downtown Jerusalem. [Of course we can still discuss solutions, but we're not the diplomats who one day will solve it.]
If you want to be an ally to Palestinian people, please feel free to continue to advocate for peace, security, and self-determination, but do it without dehumanizing or stereotyping Israelis and Jews.
If you want to be an ally to Israeli people, please feel free to continue to advocate for peace, security, and self-determination, but do it without dehumanizing or stereotyping Palestinians and, Muslims, and Arabs.
If you just want to advocate for peace, try to be a voice for reason, and don’t inflame or over-simplify an already chaotic, complicated, and deeply emotional issue. Help people find common ground and help bring the temperature down. You can be moral and stand up for what you believe in without being an asshole.
Yes, an amazing one-state liberal democracy where Palestinian boys & girls could fuck Israeli boys & girls & make cute babies, & everybody spoke Hebrew & Arabic & we all agreed that hummus and falafel are delicious and Palestinian and sufganiyot are delicious and Israeli would be awesome. But this wonderful future has about as much chance of happening in the near term as this 5'8" 53-year-old Palestinian has being a starter for the Golden State Warriors. A two-state solution is the only workable one.
Screw Hamas.
Screw the current Israeli government.
Screw the war criminal Netanyahu and his fascist friend Trump.
Screw all the wars of aggression against Israel in the last decades.
Screw the current Iranian dictatorship which btw. supports terror organizations like Hamas.
Screw Hisbollah.
Screw Taliban.
Screw terror organizations in general.
The only ones suffering are the people of Middle East, who would suffer less with a democratic two state solution.
We as Lemmy-users should act as described earlier, constructively discuss the topic. Middle East is one little topic we do not agree on in comparsion to all the great things we can agree on. I hope this post establishes a basis we as Lemmy community can discuss on. There's so much worse in the world than fellow democrats who don't share your opinion. Don't let it divide us, let's fight fascism together.
Sekundärer Antisemitismus ist jede Art von Holocaust-Leugnung und -Relativierung. So bezeichnete die rechtsextreme NPD die Luftangriffe auf deutsche Städte im Zweiten Weltkrieg als "Bombenholocaust".
More often than not, internet fights have little to no direct effect on the real world. We all love drama. And fighting some rando on the internet genuinely feels like you stuck it to someone. That's the thing with them. But we all need to ask ourselves if it did something for the people, or the cause we claim to support. If yes, it might be warranted, if no it was just mire selfish than helping.
Firstly, i want to start off my comment to state a few things. I am arab living in the middle east myself, so i am very biased.
Look, i get where you're coming from; i do. But this there's a reason why we have such heavy disagreements. I'm going to comment on a few things, but know i'm not trying to come off as rude or accusative; just trying to discuss.
(I'm going to assume by your use of "democrat" you mean people who desire democracy, and not a US democrat)
And still we can’t stop fighting against each other? No one here supports the rise of what hates this great community. We should stand together and share the spirit described. We certainly do to some extent, but every time we don’t and instead of discussing start fighting against each other, the fascists will jump for joy, since we support their rise
Well, genocide is naturally going to have a lot of fierce debate around it. We can fight zionism and fascism at the same time, we don't have to stop the world for each and every single issue and solve them one by one; we can try to solve multiple.
It’s the ongoing war in Gaza
Genocide*
But let’s not do it in a way that makes fascists to triumph and us to peter out in an endless fight regarding this topic which we can’t really change. There are so many topics we could influence, one of the most obvious being to be a digital alternative to BigTech’s platforms.
I heavily disagree. Apathy is just exploited by the enemy. Even if our total impact is small, it is worth it.
Generally:
The most important Usenet-rule for us: Don’t feed the troll. If it’s obvious that your discussion partner doesn’t want to discuss constructively, don’t answer. The most obvious trolls are those with accounts younger than a week (sometimes just insulting). If such an account appears in a discussion: Ignore + report. It might be a good idea to check the account age before discussing with someone.
What seems obvious is to argue in good faith.
Do not insult anybody, it won’t help you nor anybody else. No lemmy user is a nazi/etc. At least I didn’t see one so far. If you want to insult a lemmy user e.g. as nazi, first calm down, maybe wait some time before responding. If you still want to insult this user, it definitely is the better choice to ignore that user. Calling someone a nazi or insulting in another way is nothing that will help us in any sense. If a user actually advocates nazi ideas, it is a troll. If you want to start insulting: Don’t do it. If it’s a troll: Don’t respond, don’t feed it, just report it and shut up.
Please (!) use sources. If you state something which isn’t your opinion or an obvious fact, don’t say “Uh, I heard it somewhere”, but name a reliable source.
If there’s already an ongoing discussion between two users, only join it if you have something important to say. It’s not very helpful if there are four people discussing with one person at the same time.
I wholeheartedly agree.
What we should definitely agree on is the meaning of “Zionism”. The simple definition I have in mind is: Zionism is to advocate for the foundation of a Jewish national state (as a result of the Jewish experiences during the holocaust and centuries of persecution) and thus the approval for Israel to exist (which is one of the two conditions we need for a 2 state solution). That’s the most common German definition, but it doesn’t really fit e.g. the US-American definition
That's debatable, since zionism is about advocating for an ethnostate. But your latter comment, it not fitting the "US-American" definition is false. It's the most widely used definition. Hell, it's literally the original definition. Zionism is about the Palestine region, not just anywhere.
Why am i bringing this up? Because there were already people there. No matter what, they don't just have a right to establish their own ethnostate, claiming the land where there were already people of different ethnicities/cultures living there for an incredibly long time.
This is afaik about zionism and i may be missing something. So, if i got something wrong here, then please correct me.
What is happening in Gaza to civilians is fucking awful, and not the smartest thing for Israel to do, and some aspects of Israeli military activity ~~may be~~ are war crimes, and it doesn’t have to be genocide for it to be tragic. [As far as I know, meanwhile several international organisations like UN have declared it a genocide, so that part is obsolete.]
"Not the smartest thing to do" is a bit of an understatement, it's a genocide after all 😁
Stop with the fucking history lessons about what the Israelites did, or what the Ottomans did, or what the British did, or whatever. IT IS FUCKING IMMATERIAL. There is a pile of dog shit in the living room. Instead of arguing about whose dog took the bigger shit in the living room, maybe focus on how we clean up the dog shit.
The first thing that should be done first and foremost, is stopping the violence and genocide. But to claim history has absolutely no stake/meaning in this is wrong.
We as Lemmy-users should act as described earlier, constructively discuss the topic. Middle East is one little topic we do not agree on in comparsion to all the great things we can agree on
I'm sure this is worded wrong, but one little topic? There are hundreds of thousands of human beings suffering and dying because of these conflicts, It is not a little topic. This isn't a small disagreement to have with someone.
That's it. Apologies if i sounded rude anywhere, it's 9pm and i'm tired 😁
I would consider creating a swapfile if you have an SSD. There should be countless tutorials for doing it on Ubuntu.
It might mean your windows or Ubuntu install gets sluggish, but even 32GB (less than 10% of a typical storage drive!) of spare swap space can let your active and memory-hogging processes breathe instead of invoking the SystemD-OOM killer.
For what it's worth, I think Ubuntu is also fairly aggressive with memory management. I remember complaints that it was a little too hasty to kill user processes under memory-limited scenarios. not sure if that was addressed
It sounds like that's exactly what's happening with your setup, however you probably don't need to buy more RAM to fix it.
Type free, or free -h, into a terminal to see how much RAM and swap space is being used.
Swap is a tool that allows you to use your storage drive as additional RAM when necessary. If nothing indicates swap usage when using free, then you need to enable swap space.
Ask AI "How do I enable swap on Linux" and it should give you good instructions.
I used to use linux decades ago, then stopped for multiple reasons. Now, with win 10 eol fast approaching, I have installed Kubuntu 24.04.2 mainly for VR gaming but other gaming and normal pc use as well. I have 2 devices I would like to replace for ones with full linux support(~~drivers~~ software), unless there are ~~drivers~~ software that are easy to install not requiring compilation from source. The devices are a Microsoft Intellipoint Trackball, basically a thumb driven trackball with at least as many buttons (more is better) as the image shows.
The second device is a Logitec G13
I use this for most of my flat games, and to control my video player. Suggestions for similar hardware or easy fully functional drivers would be appreciated. ie; the g13 has game profiles, stopwatch, clock, system monitor, and a few things I don't use, the trackball has all 7 buttons programmable to anything on the kb and then some.
Only the main buttons work on the trackball, left/right/wheel, the 2 little buttons do not do what I need. The G13 does nothing, the display only shows G13, I cannot program the buttons or anything else
Generally-speaking, USB mice/trackballs don't need drivers. USB input devices look pretty much the same to the OS. You'd want some kind of non-device-specific program to perform macros when you hit particular buttons.
I have not used it myself, but I understand that antimicrox is one such program. I use Debian Linux, and it's packaged there.
kagis
On the G13, the Arch wiki has some discussion. It sounds like the best option there is "g13d". g13d is not packaged in Debian Linux, and would need to be manually compiled and installed if your Linux distro doesn't package it.
I have no idea what the state of software is to display anything useful on the thing. The Arch page says that the g13d daemon displays a logo on it when it starts up, so it clearly can display things, but I don't see any other functionality it provides (e.g. a clock) or what other software there is that can talk to g13d. If you have any Windows games that have integration with it and can display something on it, if that's a thing, they probably won't know about g13d.
From a ten-second skim, I also don't know whether the thing is set up to modify functionality based on the particular program with a foreground window, which I don't know if is important, if you want game-specific bindings.
EDIT: The G13 also includes a 160×43 pixel monochrome LCD.
There are a couple of software packages I know of that are intended to display various sorts of system information on small, external LCD displays; these would typically be set up on the front of a desktop computer case. It might be possible, if you have the technical chops, to rig one of these up to the G13's display, as they're already intended to display a small amount of information on a low-resolution display.
This includes lcdproc, lcd4linux, and a few others. They won't be oriented towards extracting and displaying data from a running video game, though, if the G13 does that.
Generally-speaking, USB mice/trackballs don’t need drivers.
Except to program the buttons
No, like...okay. How do I best put this?
"Driver" software is going to be software designed to talk directly to hardware.
In Linux, if you go looking for "driver software microsoft trackball", you probably won't generally find what you're looking for to bind things to mouse buttons.
In Windows, it's common for you to buy a device and for it to be bundled with some software written by the device vendor. That's because the device vendor is writing the software to sell their product. They're selling you a package of software and the device, and they're bundling the software specifically because they want the hardware to sell. While technically the "driver" part is only the bit that talks directly to the hardware, and often there's a lot of other software bundled, it's not uncommon to use "driver" more-colloquially to just refer to all the bundled software.
In Linux, while sometimes vendors do release proprietary software with their hardware, you're more-likely to be using software from some open-source projects. Those projects don't care about how some specific piece of hardware does in the market. They just want the functionality to be available everywhere. So unless a piece of hardware is truly unique or requires some way of specially interfacing with it, you're more-likely to be using a software package that works with many different pieces of hardware. They won't call it a "driver".
In general, for things like mice, the hardware-level stuff is all in the kernel already, because the USB standard already defines how those devices need to act to present their extra buttons; it's not necessary to add additional special software to talk to the hardware. Instead, you're just looking for a piece of software that can send a series of keypresses or whatever when you click a button, something like antimicrox.
Windows games that have integration
not games, other than the profile layout, but system monitors in windows display on it.
Fair enough. Just wanted to moderate expectations. I vaguely recall that Logitech had some other full-size "gamer keyboard" in the past that had a text display with some sort of game integration. I think I remember Teamspeak integration being on the list.
kagis
I don't think that this was it; what I'm remembering was an older keyboard, but:
A color GamePanel LCD displays game stats, system information, VOIP communication data, video playback, image slideshows
I'm guessing that the VoIP there is talking about Teamspeak, and they mention "game stats".
And I don't think that there's an out-of-box way to have something like that running under Linux for your G15 and displaying specific-game-relevant information.
I always hear that a normal computer user would never install an OS and that is the main reason Linux has not a higher market share. But I guess what we mean by that is that a user would never create a live usb, access the boot options and boot from there to install the new OS.
Is there a hard technical limitation when it comes to create a tool that installs a linux distro from a "normal" windows exe file, provided that the user first disables secure boot and fast boot (which are things a tool with admin privileges should also be able do on first run)?
Does such a tool already exist?
I feel like there's something I'm missing, forgive my ignorance
UNetbootin allows you to create bootable Live USB drives for Ubuntu, Fedora, and other Linux distributions without burning a CD. It runs on Windows, Linux, and Mac OS X.
DONT USE UNETBOOTIN. This tool more often than not breaks something and causes issues for people. Somebody I know used it and broke booting into Windows, he had to use a USB anyway to fix the bootloader.
Ohhh I remember Wubi! No need to boot from an install media and you can install it entirely under Windows. That method of installing a dual boot never seemed to get super popular and I guess based on the OSes listed in that article, it seems pretty dated and not updated. I'm kind of curious to know whether or not it still works tbh.
Instead of trying to make people install an OS or have to buy a new machine with Linux pre installed, just sell NVME drives with a Linux distro. Something like Mint, or Ubuntu. In my experience Linux is really good nowadays in recognizing hardware plus the people who would be the target audience are unlikely to have some exotic PC setup, probably just a standard off-the-shelf laptop with very common components.
Installing dual boot over a default windows installation would be tricky, bordering on infeasible. Because you would need to shrink the windows partition live (which is not supported (and even if you could, requires free space and comes with meaningful risk of data loss)) and alter the UEFI boot entries, which is also very risky and engineered to be protected from unauthorised writes.
Plus windows on a dual boot-one disk system can constantly erase your Linux entries (thanks Microsoft), making it basically unusable every month without grub knowledge to restore the boot entry. So this setup won't work on many systems.
So you'll pretty much only ever be able to install to another disk. And the portion of non-savvy users with a spare, unused disk is going to be effectively nonexistent.
I've been using Tusky for browsing mastodon for a while and really enjoyed its experience. But then they moved the boost button all the way down to the bottom of the screen and that's just too much traveling for my thumb. What used to be a seamless experience has been dragged out, and enlarged to take up a quarter of the screen.
I tried switching to Husky for a few days but its missing some key functions I like about Tusky, like being able to follow and block hashtags, and change "load more" behavior to open up instead of down. It seems to be more a Plemora thing anyway.
I don't have the skills to fork Tusky, so I'm wondering if there's a way to basically undo an update. How do I get back to an earlier version?
Why doesn't show f Droid older releases as well? I'm 100% sure f Droid have these versions stored somewhere.. Like versions that 1, 5 or even 8 years old.
This Vulkan 1.3 support for NVK is thus one of the many new features to find in the Mesa 24.1 release due out in Q2. This comes following all of the necessary extensions being wired up and NVK continuing to mature at a rather brisk pace.
The NVK driver within Mesa for open-source NVIDIA GPU support for the Vulkan API that works with the Nouveau DRM kernel driver is now capable of advertising Vulkan 1.3 API support.
Now, if you want. There will probably always be tradeoffs between the two drivers so I doubt this will ever match Nvidia's across the board, just have to pick your poisons.
Hey folks! I'm getting a fresh laptop for the first time in about a decade (Framework 16) in a couple of months and am looking forward to doing some low-level tinkering both on the OS and hardware. I'm planning to convert into a "cyberdeck" with quick-release hinges for the screen since I usually use an HMD, built-in breadboard, and other hardware hacking fun.
On the OS, I'm planning to try NixOS as a baremetal hypervisor (KVM/QEMU) and run my "primary" OSes in VMs with hardware passthrough. If perf is horrible, I'll probably switch back to baremetal after a bit. But, I'm not likely going to be gaming on it so, I'm not likely to have much issue.
Once the hypervisor is working in a manner that I like, I should have an easy time backing up, rolling back, swapping out my "desktop" OS. I've been using Linux as my pretty much my only OS for over a decade (I use MacOS as a glorified SSH client for work). Most of my time has been on distros in the Debian or RHEL families (*buntu, Linux Mint, Crunchbang, CentOS, etc) and I pretty much live in the terminal these days.
With all of this said, I am coming to you folks for help. I would like you folks to share distros, desktop environments, window managers that you think I should give a try, or would like to inflict on me and what makes them noteworthy.
I can't guarantee that I'll get through suggestions, as my ADHD has been playing up lately, but I'll give it an attempt. Seriously. If you want me to try Hannah Montana Linux, I'll do it and report back on the experience.
EDIT: Thank you all for your fantastic suggestions. I'm going to start compiling them into a list this weekend.
All modules that call a Unix library contain WoW64 thunks to enable calling the 64-bit Unix library from 32-bit PE code. This means that it is possible to run 32-bit Windows applications on a purely 64-bit Unix installation. This is called the new WoW64 mode, as opposed to the old WoW64 mode where 32-bit applications run inside a 32-bit Unix process.
Old Proton builds probably won't backport this (unless it's completely isolated, idk the code layout of Wine). But are old Proton builds still necessary? Occasionally there's regressions, but are there really any games that require like a 2 year old Proton build?
I made this post because I am really curious if Linux is used in offices and educational centres like schools.
While we all know Windows is the mac-daddy in the business space, are there any businesses you know or workplaces that actually Linux as a business replacement for Windows?
I.e. Mint or Ubuntu, I am not strictly talking about the server side of things.
Linux in corporation fails in multiple ways, the most prevalent is that people need to collaborate with others that use proprietary software such as MS Office that isn't available for Linux and the alternatives such as LibreOffice aren't just good enough. It all comes down to ROI, the cost of Windows/Office for a company is cheaper than the cost of dealing with the inconsistencies in format conversions, people who don't know how to use the alternative X etc etc. This issue is so common that companies usually also avoid Apple due to the same reason, while on macOS you've a LOT more professional software it is still very painful to deal with the small inconsistencies and whatnot.
Linux desktop is great, I love it, but it gets it even worse than Apple, here some use cases that aren't easy to deal in Linux:
People who need the real MS Office because once you have to collaborate with others Open/Libre/OnlyOffice won’t cut it;
Designers who use Adobe apps that won’t run properly without having a dedicated GPU, passthrough and a some hacky way to get the image back into your main system that will cause noticeable delays. Who wants to deploy GPU passthroughs for others? Makes no sense;
People that run old software / games because not even those will run properly on Wine;
Electrical engineers: Circuit Design Suite (Multisim and Ultiboard) are primarily designed for Windows. Alternatives such as KiCad and EasyEDA may work in some cases but they aren’t great if you’ve to collaborate with others who use Circuit Design Suite;
Labs that require data acquisition from specialized hardware because companies making that hardware won’t make drivers and software for Linux;
Architects: AutoCAD isn’t available (not even the limited web version works) and Libre/FreeCAD don’t cut it if you’ve to collaborate with AutoCAD users;
Developers and sysadmins, because not everyone is using Docker and Github actions to deploy applications to some proprietary cloud solution. Finding a properly working FTP/SFTP/FTPS desktop client (similar WinSCP or Cyberduck) is an impossible task as the ones that exist fail even at basic tasks like dragging and dropping a file.
If one lives in a bubble and doesn’t to collaborate with others then native Linux apps might work and might even deliver a decent workflow. Once collaboration with Windows/Mac users is required then it’s game over – the “alternatives” aren’t just up to it.
Windows licenses are cheap and things work out of the box. Software runs fine, all vendors support whatever you’re trying to do and you’re productive from day zero. Sure, there are annoyances from time to time, but they’re way fewer and simpler to deal with than the hoops you’ve to go through to get a minimal and viable/productive Linux desktop experience. It all comes down to a question of how much time (days? months?) you want to spend fixing things on Linux that simply work out of the box under Windows for a minimal fee. Buy a Windows license and spend the time you would’ve spent dealing with Linux issues doing your actual job and you’ll, most likely, get a better ROI.
From a more market / macro perspective here are some extra reasons:
Companies like blame someone when things go wrong, if they chose open-source there's isn't someone to sue then;
Buying proprietary stuff means you're outsourcing the risks of such product;
Corruption pushes for proprietary: they might be buying software that is made by someone that is close to the CTO, CEO or other decision marker in the company, an old friend, family or straight under the table corruption;
Most non-tech companies use services from consulting companies in order to get their software developed / running. Consulting companies often fall under the last point that besides that they have have large incentives from companies like Microsoft to push their proprietary services. For eg. Microsoft will easily provide all of a consulting companies employees with free Azure services, Office and other discounts if they enter in an exclusivity agreement to sell their tech stack. To make things worse consulting companies live of cheap developers (like interns) and Microsoft and their platform makes things easier for anyone to code and deploy;
Microsoft provider a cohesive ecosystem of products that integrate really well with each other and usually don't require much effort to get things going - open-source however, usually requires custom development and a ton of work to work out the "sharp angles" between multiple solutions that aren't related and might not be easily compatible with each other;
Open-source requires a level of expertise that more than half of the developers and IT professionals simply don't have. This aspect reinforces the last point even more. Senior open-source experts are more expensive than simply buying proprietary solutions;
If we consider the price of a senior open-source expert + software costs (usually free) the cost of open-source is considerable lower than the cost of cheap developers + proprietary solutions, however consider we are talking about companies. Companies will always prefer to hire more less expensive and less proficient people because that means they're easier to replace and you'll pay less taxes;
Companies will prefer to hire services from other companies instead of employees thus making proprietary vendors more compelling. This happens because from an accounting / investors perspective employees are bad and subscriptions are cool (less taxes, no responsibilities etc);
The companies who build proprietary solutions work really hard to get vendors to sell their software, they provide commissions, support and the promises that if anything goes wrong they'll be there. This increases the number of proprietary-only vendors which reinforces everything above. If you're starting to sell software or networking services there's little incentive for you to go pure "open-source". With less companies, less visibility, less professionals (and more expensive), less margins and less positive market image, less customers and lesser profits.
Unfortunately things are really poised and rigged against open-source solutions and anyone who tries to push for them. The "experts" who work in consulting companies are part of this as they usually don't even know how to do things without the property solutions. Let me give you an example, once I had to work with E&Y, one of those big consulting companies, and I realized some awkward things while having conversations with both low level employees and partners / middle management, they weren't aware that there are alternatives most of the time. A manager of a digital transformation and cloud solutions team that started his career E&Y, wasn't aware that there was open-source alternatives to Google Workplace and Microsoft 365 for e-mail. I probed a TON around that and the guy, a software engineer with an university degree, didn't even know that was Postfix was and the history of email.
Trying to install VPN and these are the instructions Mullvad is giving me. This is ridiculous. There must be a more simple way. I know how to follow the instructions but I have no idea what I'm doing here. Can't I just download a file and install it? I'm on Ubuntu.
It's less complicated than it looks like. The text is just a poorly written mess, full of options (Fedora vs. Ubuntu, repo vs. no repo, stable vs. beta), and they're explaining how to do this through the terminal alone because the interface that you have might be different from what they expect. And because copy-pasting commands is faster.
Can’t I just download a file and install it? I’m on Ubuntu.
Yes, you can! In fact, the instructions include this option; it's under "Installing the app without the Mullvad repository". It's a bad idea though; then you don't get automatic updates.
A better way to do this is to tell your system "I want software from this repository", so each time that they make a new version of the program, yours get updated.
but I have no idea what I’m doing here.
I'll copy-paste their commands to do so, and explain what each does.
The first command boils down to "download this keyring from the internet". The keyring is a necessary file to know if you're actually getting your software from Mullvad instead of PoopySoxHaxxor69. If you wanted, you could do it manually, and then move to the /usr/share/keyrings directory, but... it's more work, come on.
The second command tells your system that you want software from repository.mullvad.net. I don't use Ubuntu but there's probably some GUI to do it for you.
The third command boils down to "hey, Ubuntu, update the list of packages for me".
Frankly in this case even a simple bash script would do the trick. Have it check your distro, version, and architecture; if you got curl and stuff like this; then ask you if you want the stable or beta version of the software. Then based on this info it adds Mullvad to your repositories and automatically install it.
I like them, even for software installation. Partially because they're lazy - it takes almost no effort to write a bash script that will solve a problem like this.
That said a flatpak (like you proposed) would look far more polished, indeed.
I’ve written some other posts on Wayland recently, and it’s time for another one! Feel free to skip it it you aren’t interested in a discussion of Wayland and platforms. Many may …
Been using Wayland since 3'ish years ago and my desktop experience has been really smooth -- no crashes, errors or anything of the sort. Everything "just werks" just as if I were on Xorg instead. Even on a completely obscure/zero linux support single board computer (Orange pi zero 3).
Not as bad as you might think. The nouveau drivers have come a long way for maxwell. You should give it a shot if you haven't. But, unfortunately, if you are using anything new then nouveau sucks. It's a fun game where you get to wait until nvidia no longer wants to support your GPU and hope by that point that nouveau has progressed far enough that you won't be looking at noman's land.
I wasn't fully aware of NVK and where it's at. It's actually pretty exciting. I wouldn't mind dropping my current nvidia binary blob for fully open source drivers.
Hi, everybody Recently, a guy noticed that I was using it and asked why? For me it because in Linux many things are done through the terminal because Linux has many different desktop environments
He also compared terminal commands with cheat codes in GTA and other games, he understands what benefits you take from them, but not from terminal commands
Command line is a lot more powerful for a lot of cases. Most CLI programs are written with the idea that the caller might be another program, so they tend to be easy to chain with pipes and redirection. So you have tons of simple tools that you can combine however you need.
HackBerryPi CM5 is an open source, Raspberry Pi-powered handheld PC with a BlackBerry keyboard
The HackBerryPiCM5 is a handheld computer with a 4 inch, 720 x 720 pixel touchscreen display, a repurposed BlackBerry keyboard, and and a Raspberry Pi Compute Module 5 inside, allowing you to use the device as a portable Linux computer.
It’s the latest line of open source, Raspberry Pi + BlackBerry handhelds from ZitaoTech. While this model is not yet available for purchase from Elecrow or […]
It's not lost on me that it took nearly 5 days and collectively ~30 hours to set up and get my Linux install fully operational.
But it is operational.
The last bit of this was trying to get piracy up and running again. Stellaris just released the Astral Planes update, so that was my test. I downloaded the RUNE and Fitgirl versions, both of which installed and ran correctly off the rip using Lutro.
After that I popped on an USB disc drive, popped in my old total annihilation CD and installed that and got that running.
So everything works. All the games I play worked, and all the media I played worked.
Are there some things that annoy me? Yeah. Gnome apparently doesn't let you create desktop shortcuts unless you resort to command line. That's ridiculous. I also no longer have 20+ years of experience to draw on and am having to relearn basic stuff like "how do I uninstall or undo what I just did when I ran a script from a tutorial I didn't understand".
So for now, I guess I'm along for the ride, and get to relearn how to do everything.
I wouldn't recommend Linux to my dad or any of my friends. They can barely use windows, and I had enough trouble during my setup and install that I know they'd run into an issue eventually that I'd have to solve. Plus they barely learned how to use Windows, and Linux is NOT dumbed down enough for the average user yet.
As a final note some Linux users push harder than crack dealers I've met. "Just one hit of KDE man I just know you'll love it, oh you had issues with KDE? Well try these 300 different kind of KDE's cause I promise bro once you go KDE you never go back".
@Phanlix Gnome did a number of things that irritated me when it went to version 3, then I found Mate which behaves like old Gnome 2 but ported to modern GTK. Much nicer.
I'm in the market for a new big desktop replacement gaming laptop, and looking at the market there are almost exclusively Nvidia powered.
I was wondering about the state of their new open-source driver. Can I run a plain vanilla kernel with only open source / upstream packages and drivers and expect to get a good experience? How is battery life, performance? Does DRI Prime and Vulkan based GPU selection "just work"?
The only alternative new for my market is a device with an Intel Arc A730M, which I currently think is going to be the one I end up buying.
Edit 19/11: Thanks for all the feedback everyone! Since the reactions were quite mixed - "it works perfectly for me" vs "it's a unmaintainable mess that breaks all the time", I'm going to err on the side of caution and look elsewhere. I found a used laptop with an AMD Radeon RX 6700M, which I'm going to check out the coming days. If not, I've also found Alienware sells their m16 laptop with an RX 7600M XT, which might be a good buy for me (I currently still rock an Alienware 17R1 from 2013 with an MXM card from a decomissioned industrial computer in it).
This OUTDATED article gets posted all the time. The full story is the guy is a massive FreeBSD fan so he is trying to convince more people to keep on using Xorg because he wants to make sure it isn't abandoned. Reason for that being that Wayland is built with Linux in mind and would not work under FreeBSD without a lot of effort bwing put in as it uses some Linux-specific components or libraries.
Let's go through the article point by point:
Wayland is broken by design:
A crash in the window manager takes down all running applications: Yes, because the compositor IS the server, window manager AND compositor at the same time.
You cannot do a lot of things: What, like allowing Windows to see your keystrokes, which makes developing a keylogger absolutely trivial?
There is not /usr/bin/wayland: Yes, because Wayland is a set of protocols, which a bunch of projects can implement as few or as many of, as they see fit, thus avoiding the issue of "unmaintainable mess" that has plagued Xorg for years.
It offloads work to the window manager: Again, yes, that's a part of its structure: do the protocols, then let the compositor implement them. That way, you have multiple implementations running simultaneously that are well integrated with their window managers and thus more efficient and performant. It also means that when a compositor suffers from too much cruft, we can just make a new one, while application developers wouldn't really have anything to change because if their application works on Wayland, then it works on different compositors (unless it is made specifically for GNOME, or specifically for wlroots, like wlr-randr)
....so what works on DE 1, doesn't necessarily work on DE 2: True, because oftentimes, it doesn't need to. Not implementing features can lead to a more lean and streamlined software solution. However, sometimes features are necessary and only implemented in some compositors. This usually happens because the universal solution is not ready. KDE are often known to do this with Plasma and KWin.
Wayland breaks screen recording applications: Correction: The following screen recording applications were not built to support Wayland (because Wayland is new to them or they just decided not to, or they were either too busy or too irresponsible enough to realise Wayland is coming, and has been for over 10 years. In defence of the devs, they probably wanted to make sure Wayland will become stable enough, but it has been the default even on Debian for many years now, so....
In terms of the applications, I'm not aware of many of them, and for this sort of application, I'm sire alot of work is required to change the graphical backend, so I understood that some smaller projects gave up, but OBS has been working on Wayland for quite a while. Is it perfect? I don't think so, but back when Brodie Robertson was using Hyprland, he was recording his videos using OBS. This article is quite outdated.
Wayland breaks screen sharing applications:
As the update shows, Jitsi now does work on Wayland.
Zoom only seemed to work on gnome, BUT if you open up the Link to the zoom issue and read through the comments, there is clearly a person that clearly states that they changed /etc/os-release from PureOS to debian and it worked for them, all because of some pointless limitations enforced by the Zoom developers. As the person posting the issue states "Currently, the zoom application has put an arbirtrary restriction on screensharing so it ONLY works on GNOME, when the api being used works on all wayland desktops." Read that again. It's a pointless restriction put there by the Zoom team because they couldn't be bothered to test anything non-GNOME.
And the last issue is a problem with the article writer's own appimage. I don't know about that one.
Wayland breaks automation software
As stated IN YOUR FACE, it is an application that works on X11 only. Yes, Wayland is not made to use such applications, but it doesn't mean they can't exist. Every heard of ydotool (remember that name)? Now you have.
Next up, we have 3 issues about GNOME and KDE global menus (1 for GNOME, 2 for KDE). From the little I know about global menus and using these projects, as well as considering that they are both incredibly stable on Wayland and Fedora KDE will be dropping Xorg completely, I think it's safe to assume these issues have probably been fixed. Please correct me if I'm wrong.
Wayland breaks AppImages that don't ship a special QT plugin: Great! Just ship the plugins then! Problem solved! Also, quote from the article: "However, there is a workaround: "AppImages which ship just the XCB plugin will automatically fallback to running in xwayland mode" (see below)."
Wayland breaks Redshift: Once again, a program built for Xorg doesn't always work on Wayland. Especially if it works with the compositor, like a colour temperature control application, or a wallpaper setter. The article quotes that "Redshift does not support Wayland since it offers no way to adjust the color temperature" which is not true, as proven by Redshift alternatives like Gammastep.
Wayland breaks global hotkeys: I present to you: Hyprland (where you can get global hotkeys). Now, it is normally not allowed by design, as a security measure, but Hyprland has not allowed that to stop them from implementing a solution where you can choose keys that will be passed on to the application. Boom, problem solved. Unfortunately, it doesn't seem to be implemented anywhere else, as far as I know.
Wayland does not work for XFCE: Come back to me in late 2024 after XFCE 4.20, which will introduce Wayland support, has been released. Also, wiki.xfce.org/releng/wayland_r…
Wayland does not work properly on Nvidia Hardware: It keeps on getting closer but is not there yet, or so I've heard. Apparently, the issue is with the proprietary drivers, as noveau works well. But I use AMD, so I'm only working off rumours and opinions here.
Wayland does not work properly on Intel hardware: Again, I'm using AMD, so I can't confirm or deny this, but considering the Intel drivers are open source, and I've heard about many, many improvements made on the Intel side of things, I think it would be reasonable to assume it has been fixed.
Edit: As multiple Intel users have pointed out in the comments, there seem to be no issues on Wayland with Intel hardware.
Wayland prevents GUI applications from running as root: This one has been crossed out as the article writer admits there is a solution
Wayland is biased towards Linux and breaks BSD: Arguments seem valid, and I'm guessing, are correct. This one is likely true and will remain so for the foreseeable future.
Edit: And yet, it seems that there are Wayland compositors for FreeBSD, so the above might only be true for OpenBSD and others.
Wayland complicates server side decorations: From what I've heard, this is true, mainly something to do with some GNOME agenda, as the article states. I think that one is true.
Wayland breaks windows raising/activating themselves: The linked issue is closed and seems to be resolved. There is a mention of a WIP protocol at the time (2019) that woukd fix this. I had difficulty following the discussion, but I think this has been fixed.
Wayland breaks RescueTime: Because RescueTime depends on X11-only tools like xprop.
Wayland breaks window manager: What you're describing is Wayland breaking X11-only tools for doing various tasks in a window manager. They are X11 tools, so of course they don't work on Wayland. I'm not sure if there are alternatives, but I'd guess there probably are. I know for a fact that Xrandr has alternatives like wlr-randr and kanshi for wlroots.
Wayland requires {instert WM here} to implement Xorg-like functionality:Yes, it does.
Quote from article: "As it currently stands minor WMs and DEs do not even intend to support Wayland given the sheer complexity of writing all the code required to support the above features. "
DEs: GNOME, KDE, MATE, XFCE, Cinnamon, Budgie, Enlightenment, and recently even Pantheon have either announced to start work on, have started work on, or already support Wayland.
Window managers: Qtile is doing it. Xmonad wants to hire a dev to do it. Dwm has a spiritual successor called dwl. i3 has a drop-in replacement called sway. Openbox has 2 spiritual successors called labwc and waybox. Now you might notice one of the biggest WMs is missing on here: AwesomeWM, which is such a shame. The Awesome devs have said they would be okay with someone taking on that challenge (which has already been attempted, as evidenced by the existence of way-cooler), but it seems that they wouldn't do it themselves.
As for the projects mentioned in the article, (JWM, TWM, XDM, IceWM) they are too small and obscure, and will likely fade away with Xorg.
Wayland breaks _NET_WM_STATE_SKIP_TASKBAR protocol I don't know about that one, ao I'll assume it is still the case. Edit: Ignoring the fact that the link is broken, it basically just links to a docs change where skipTaskbar is marked as unsupported on Linux. Link: github.com/electron/electron/p…
Wayland breaks NoMachine NX The link points to a page that has this marked as "SOLVED, Released in version 8" so I'm guessing it has been solved.
Wayland breaks Xclip: As you said it yourself, Xclip is an X11 application, so it doesn't work on Wayland. Of course it wouldn't work on Wayland. With Wayland, we're trying to prevent what happened with Xorg from happening again, or am I wrong?
Edit: As pointed out by some people in the comments, there are also alternatives to xclip like wl-clipboard.
Wayland breaks SUDO_ASKPASS: That link seems to point to the way this issue has been resolved so I don't see your point.
Wayland breaks X11 atoms: I lack knowledge on the topic so will assume this to be a valid argument
Wayland break games: I'm 99% sure you can disable Vsync??? But I'm not a gamer. Also, WINE on Wayland is getting better and better. Soon enough, I hope the subpar performance will become better performance (when compared to Xorg)
Wayland breaks xdotool: Well, yes. There is ydotool, but you're looking for a 1-to-1 replacement and I'm not sure if ydotool fits the bill for that.
Wayland breaks xkill: Well, yes. Again. It is an X application, so of course it does. Though for some reason I remember it working once on wayland. Must have been an xwayland app, or maybe I'm just misremembering this.
Wayland breaks screensavers: Yeah, that seems to be the case.
Wayland breaks setting the window position: That is a WIP for Plasma, not sure about any other projects, so assume true for anything else.
Wayland breaks color management: Not anymore. That is being actively worked on.
Wayland breaks DRM leasing: While not rhat familiar with the issue, my understanding of the topic is the article is correct: not all compositors support it.
Wayland breaks in-home streaming: Not familiar with this, so will assume true.
Wayland breaks NetWM/EWMH: Yeah, that seems to be the case.
Wayland breaks window icons: Yeah, that seems to be the case, as said in the article, when no .desktop files are used.
And that concludes my response to this article based on my fairly limited knowledge on the topic. If I got anything wrong, please, please let me know. As you can see my knowledge is quite limited, and as such, any corrections (preferably backed up with evidence) would be appreciated
@theshatterstone54 Get no argument from me, another way that Wayland is broken is with an application running on one machine but displaying on another, which was a large part of the original X protocol. Between this and the fact that I'm running Intel graphics for which there exists an in-kernel Xserver, I continue to run Xorg.
I'd like it noted I'm an absolute Linux noob here.
Yesterday I had issues with Nvidia, which was fixed by switching to Pop!OS which worked swimmingly. Fedora failed at this spectacularly, Nobara, their Nvidia specific version, spectacularly so.
I also had issues with mounting a samba share. I have an asus router that's capable of hosting samba shares, but only in v1 of samba which as it turns out is disabled by default in Linux distros these days. Windows too but the fix for that is easier, just install the package. Anyways. I was able to get a temp fix going by enabling guest login and disabling the users server side, which was unsatisfying and only allowed me read access.
After following dozens of tutorials and reinstalling Pop!OS to clear my shenannigans I found a forum that had this listed.
client NTLMv2 auth = no
client use spnego = no
client min protocol = CORE
client max protocol = NT1
Post that under smb.conf (under workgroup=WORKGROUP... yes it matters) and it disables all versions of samba except for v1, which works for me since this is the only share I care about.
So now, I can log into my samba share, and I have full read write access, yay.
But I still couldn't figure out how to permanently mount this NAS, boo. I found some topics discussing adding a line to fstab to get it to mount on boot. After a few hours of poking I realized cifs was indeed not installed on PopOS! so the tutorial I was following was right, but still wrong.
After that I was at least getting an error, which referred me to mount.cifs(8) - Linux man page, which I'm pretty sure by arriving at that means I'm now a man.
Was the final syntax to get the ball rolling, yes I know I should do a credentials file and link that, get off my back mom.
And finally... my samba v1 file share is mounted within Linux.... and there was much rejoicing, yay.
Anyways half the reason I made this post is so I can search it later if I ever need to do this godforsaken task again, as exactly zero of this was intuitive or easy. In fact, all of this could have been avoided if whoever wrote this decided not to baby me and left V1 protocols intact, despite the security risk. The fact is all these package still have V1 in them, they're just disabled by a really really in depth process, and reenabling them was... a pain in the rear.
I still am having another issue. I have a local external harddrive that's connected via USB. I got that mounted fine through Disk and changing the settings there, which automatically updates fstab for you (thanks to whomever made that user friendly at least). However, steam will NOT point to that drive no matter what I do, chmod 777 is already in play. Weirdly, I was able to manually add it through the steam console commands, but that seemed to start it's own instance of steam, and none of the changes saved, the drive was working great and installed a few games fine, but on reboot or even just closing and reopening steam it's disassociating.
So gotta say, so far, I do NOT love drive management in Linux. I guess shame on me for using something semi-obscure, but Christ. I literally have been working on this all day since I got up at 10am. User friendly this is not.
The goal still is to game on Linux, day 2 has passed and I'm closer to being ready to install games.
Day 3 will be spent figuring out how to get that damn USB drive on steam as a secondary install location.
Any tips would be appreciated. I've chmod 777'd the mounted drive. And I was able to add it via steam console manually, but it didn't save unfortunately and reset everything after I exited steam.
EDIT: Got it, there are other comments where I linked how within this thread.
There's infinity between should and does sometimes.
So it was already ext4.
I ended up manually running the steam console as described here. Still wasn't able to use the gui to add a drive but I was able to use the console command to do it manually. Then I restarted to make sure everything was working. On starting steam again it was gone! So I full exited steam and opened console again, and somehow it was there! So I set the option under settings to start on boot thinking that it'd run the console edition again on boot and I could live with that.
Well it turns out somehow there are now 2 steam installs on my computer. I'm not gonna touch it since it's working, but my working theory is somehow running the console created a second steam on my pc. It did act like it was doing a full install the first time I booted on command line. Weird. But like I said it's working now. I may poke at it later and see if I can uninstall the redundant one, but I kinda don't wanna poke it.
Your system information Steam Version: 1687015240(Latest Beta) Steam Client Build Date: Sat, Jun 17 10:53 AM UTC -05:00 Steam Web Build Date: Fri, Jun 16 8:51 PM UTC -05:00 Steam API Version: Steam...
PipeWire 0.3.81 (2023-10-06) This is the first 1.0 release candidate that is API and ABI compatible with previous 0.3.x releases.
Highlights
jackdbus support is now enabled by default.
IRQ based scheduling in ALSA was improved and enabled by default for Pro-Audio profile. It will also link the pcms together to get lower latency. This now matches what JACK does and results in equal latency for Pro-Audio profiles.
Support both old and new versions of webrtc-audio-processing to make the transition easier.
Forced quantum changes by nodes or metadata will now also force a suspend and resume of the graph, like the rate changes to make sure all nodes adapt to the new quantum. This is important for Pro-Audio nodes that need to reconfigure the hardware to a new period in IRQ based scheduling.
Fix a regression in regex parsing.
Many bugfixes and improvements.
PipeWire
Jackdbus is by default enabled now. The idea is that when jackdbus is installed, the real libjack.so is in the path and we can become a real JACK client.
Forces quantum changes by nodes or metadata will now also force a suspend and resume in the graph, like the rate changes to make sure all nodes adapt to the new quantum. This is important for Pro-Audio nodes that need to reconfigure the hardware to a new period.
The stream now has an EARLY_PROCESS option that can be used to implement custom buffer fill levels. (#3480)
Fix a bug in position reporting in the driver node. (#3189) (#3544)
Destroying a link will now recalculate the graph correctly.
Fix the rate comparison for finding the best rate in the graph.
Use malloc_trim() when available to release memory. (#1840)
Tools
pw-cat now supports DFF DSD files.
pw-cli avoid some NULL derefs in some cases.
Modules
The RAOP sink has seen some cleanups and improvements. It will now ask for feedback every 2 seconds to keep some devices alive.
A bug in filter-chain was fixed where it would fail to apply the gain when mixing just one source.
The filter-chain can now pass the stream volume to a control in the filter-chain graph. (#3434)
Improve volume handling in RAOP sink.
Pulse-server
Some cleanup in the pending_stream handling.
Fix a regression in the event emission code where it failed to emit a changed event when a node was linked. (#3522)
Lower the realtime priority of pulseaudio clients.
Set pulse.module.id on the echo-cancel streams. (#3541)
SPA
Support both old and new versions of webrtc-audio-processing to make the transition easier.
The ALSA driver now does the sync of all followers directly from the wakeup event. This results in more stable rate matching.
IRQ based scheduling in ALSA was improved and enabled by default for Pro-Audio profile. It will also link the pcms together to get lower latency. This now matches what JACK does and gives equal latency for Pro-Audio profiles.
GNU/Hurd support was added.
Some improvements to passthrough handling.
Bluetooth
Improvements to the codec handling when PipeWire is used as Audio Gateway.
Adapt to new Bluez API for BAP devices.
JACK
When the jack library is set in the default library path, avoid using LD_LIBRARY_PATH because this can cause confusion.
Handle clearing the latency on a port.
jack_property now always manages to actually change the metadata because it waits for a roundtrip before exiting.
@Joliflower What I'd love to see for pipewire is a working port of pulse-effects. I really miss the capabilities that provided and it will not work with pulse-pipewire, I've tried.
Conceptually I can understand that Termux cant take a photo or video from a camera device because it doesnt have access to the camera drivers that Android has....
...except that the Termux API does allow you to take a photo. So why is video off limits?
Yeah, I mean it's not like they're calling native Android functions there (in proceedWithOpenCamera), it looks like the CameraDevice object might offer a lot more capture modes that just aren't being tapped into. Is it just a programming issue, or does Android only offer Photo contexts but not Video ones, or...?
The full error for anyone having issues with the screenshot is: Installation Failed Bootloader installation error The bootloader could not be installed. The installationc ommand grub2-install -target=i386-pc -recheck -force /dev/nvme0n1 returned error code 1.
Context: I've had a hell of a rough time trying to install linux on my system, I've tried Pop, 2 versions of Ubuntu, Mint, and now I'm trying Nobara, and it's the first one that failed to install (I've mostly had video driver issues with the others.) My current disk situation is kind of a mess, I have 4 in the system: 1. ~15 year old OCZ SATA 128GB SSD (windows/boot) 2. ~10 year old WD SATA 512GB SSD (windows libraries like pictures, documents, downloads, etc) 3. ~6 month old Samsung 990 EVO 2TB M.2 NVMe SSD (games installed from windows) 4. ~5 year old BPXPro 1TB M.2 NVMe SSD (previous Ubuntu install that I had other issues with)
#1 is my boot drive and has the bootloader on it (when I want to boot ubuntu I hit F11 and select the second entry for that drive in the menu.) Previous distro installs have had no problem installing right over top of that and disk #4, but for whatever reason Nobara has failed to install the boot loader and I have no idea how to even begin to resolve this. I've done some searching and only found results with similar situations that aren't quite the same, it seems this is commonly an issue with linux installs into partitions of a drive that is shared with windows, but that's not what I'm doing (at least not for the main install, I guess that is kind of what it's doing with the bootloader?)
I can manually erase disk #4 if that would help, but is there some way I can manually go in and clear out the old bootloader (without messing up the windows install/boot)?
Other specs in case it's relevant: * Ryzen 7 3800X 3.9GHz 8-core CPU * 32GB DDR4-3200 RAM * Gigabite Vision OC 12 RTX3060 GPU
On discord using fedora linux, when screensharing, it works, but my cursor doesn't show(so it shows the screen, but not cursor), does anyone else have the same problem as me? and if you know, how can i solve it?
I found this bit of information but it's related to openSUSE and is quite old but I'm hoping it might help. spinics.net/lists//linux-input…
It doesn't show up in /dev/input/...
Any ideas on how I could get this thing recognized so I can use it?
Update 1:
I got connected with someone at the Simracing space on matrix per the advice from @lemonuri@lemmy.ml and they helped me to get it working. Here is what we did.
Create the file 99-handbrake.rules in /etc/udev/rules.d and add the two following lines to it.
This forces the device to usbhid as a joystick whenever it is plugged in and recognized.
Run the following command to reload the device rules if you don't want to reboot. Otherwise you can omit the command and reboot.
sudo udevadm control --reload
It now shows up and is working.
So the device was registering a button at the end of the pull and showing up as an Xbox controller while not recognizing the axis being moved so it was all or nothing.
I installed protopedal and following advice created a dummy device which remapped the inputs so that it registers the analog input only which worked.
protopedal --name "handbrake" -b JOYSTICK -a THROTTLE -s 0:THROTTLE -a Y --no-auto-buttons --no-auto-axes /dev/input/by-id/usb-ZSC_ODDOR-HANDBRAKE-event-joystick
Update 2:
All credit goes to JacKeTUs for his work on helping me out. He is making/made the driver for this. It may go into AUR for Arch users, so if anyone ends up looking for support for this handbrake you can find the source at the below link.
This will install the driver (currently it needs to be loaded after running sudo make) and the udev rule. It eliminates the need for protopedal but does require launch options to be set.
I am pretty sure you need to configure more (fake) buttons for the handbrake, I had the same problem. Otherwise it does not get recognized as a gaming device.
I can look up later how I solved this or you can ask the simracing linux community, which helped me with a couple of similar pronlems before:
A place for all the niche of niche gamers to discuss and join other simracers!\ Join the Simracing space here matrix.to/#/#simracing:matrix.…
You're invited to talk on Matrix. If you don't already have a client this link will help you pick one, and join the conversation. If you already have one, this link will help you join the conversation
In this regard, if you study the following website, this kind of website can also be constructed in this format and then federated ? You can not only insert images in the blogs but also embed videos. However, the blogging functionality has to be closed for the users.
Events could be federated, so could any blogs. Wordpress creates a community that's viewable from lemmy for the blog, where users cannot post from, but can comment on
So anything I said below was all a lie, it turns out that the issue was kde and my monitors, which are 240hz. I swapped to gnome and the issue disappeared, and then I installed bazzite kde on a second drive and the issue reappeared. Setting my refresh rate to 120hz stopped the flickering and upon setting it back to 240hz I do notice an appreciable decrease in artifacting. I have no idea what to do with this information, but if anyone is experiencing this try just decreasing your refresh rate for your monitors.
Howdy,
Just installed Nobara again and am trying to figure out why this is happening. I think it's a firefox thing since I haven't seen it happen in any other application; basically anytime I do a lot of scrolling, the firefox window breaks down and I can see my desktop background behind it. It always happens in the bottom right cornerish part of the window. I'm up to date on all updates as far as I'm aware. I did some googling and checking out the nobara discord but I couldn't find anything related. I tried recording my screen via spectacle to show the issue, but it wouldn't capture the issue.
Any help would be appreciated; I am a linux beginner so dumbing down any info you have would be nice. Thanks!
Not sure if I'll be of help, but I can try. It would help to get some more information.
You're using the Breeze cursor theme, so I'll assume you're using KDE Plasma. The cursor looks like it's from Breeze 5, not 6, are you on the old Plasma 5? If you are on Plasma, you can go to settings and go to "System information" (near the bottom) or something like that. (IIRC, It was a long time ago since I last used it)
Are you using an Intel, AMD or Nvidia GPU?
Are you on X11 or Wayland? (They're different ways to handle windows, X11 is very old, but may work better in some cases. Wayland is newer, more secure, has some features that X11 lacks, like HDR & is usually better)
You can check the windowing system (X11/Wayland) by opening the terminal (the application Konsole on Plasma) and typing echo $WAYLAND_DISPLAY and pressing enter. If you only get an empty line, you're on X11, otherwise you're on Wayland.
If you're on Wayland, go to the URL about:support in Firefox. Then search (ctrl+f) for Window Protocol. This should be Wayland, otherwise it's falling back to a X11 compatibility layer called Xwayland.
~~I'm on KDE Plasma 6.3.4 with Wayland, using an Nvidia GPU, 4080 super. Checking that about page, it says it's using wayland as well. I'm using flatpak firefox version 138.0.4.~~
~~I really can't peg what causes it. I have two monitors, and my non primary one seems worse than the other. My primary display will only do it occasionally, but scrolling through youtube on the other will basically always cause the issue. Like I said, I've only seen it happen with firefox so it has to be something weird with the install. Is there a different way to install firefox other than a flatpak? Googling that...~~
Ok, I'm not sure why I didn't try this, but I downloaded just the linux ...exe? Program? from the firefox website and it seems like the glitch is nonexistent on that version. My next question would be how different is that from the flatpak? What's the difference? Do I need to do something else for updates?
There are a few common ways to distribute software for Linux, which I'll try to explain while leaving out the more complicated parts: - Appimage: The program & all of its dependencies are put into a special filesystem image file. (think special .iso or .zipfile) Works on any distro & does not require administrator privileges, but has a large file size. This is somewhat close to an .exe file. - Statically compiled binary: The program is compiled in such a way, that the program file contains all dependencies. Unlike an appimage, the program file is not an archive, so it does not contain any files within itself. So, all the libraries (small program parts) are placed in a large program instead of being zipped up. Can usually be run without proper installation, like appimage & .exe files. This is also a bit like an .exe file. - Package: The program & asset files are archived, usually compressed .tar archives, (linux equivalent of .zip/.7z/.rar) which are extracted (unzipped) during installation. Sometimes a small included script is run during install/update/removal. Usually, architecture (x86, ARM, risc-V, etc.) & dependency information is also included. Common package formats include: .deb (Debian based distributions like Ubuntu, Mint, etc.), .rpm (RHEL, OpenSUSE, Fedora & derivatives). These packages are usually somewhat distribution & version specific. For example, you might be able to install a Debian .deb on Ubuntu, but if you have incorrect versions of dependencies, it either cannot be installed (you get a warning/error) or the program won't work correctly or at all. Often, package managers like apt, dnf & pacman get these for you, so you don't need to think of them as files, but you can also install package files like .deb or .rpm. - Flatpak: This one's a bit complicated. Something of a mix of all of the above. Works anywhere, but you need to have the application flatpak installed to run programs installed this way. Flatpak programs are installed for each user, meaning that no administrator privileges are required. They also support sandboxing, meaning that a program only gets access to files & functionalities it needs, like on smartphones, but that is optional and not all programs make use of it. - Snap: Also complicated. For an average user, mostly like flatpak. Only guaranteed to work on Ubuntu, but might work elsewhere.
So, how you installed a program may change how it works a bit. For example, the versions of dependencies you have can change the program's behaviour. Also, some configuration can often be done when compiling a program, like specifying whether to use Qt or GTK for drawing windows, or disabling bluetooth support. Different packagers (people who make appimages, flatpaks and/or paclage files) may choose different options here.
Sometimes flatpak programs may use old versions of dependencies. Also, I'm not sure if this is the case with Firefox, but Chromium's (Google chrome & derivatives, like Brave) sandboxing (security things) conflict with flatpak's own, so some of Chromium's security features are disabled in favor of using flatpak's own ones.
If the flatpak version of Firefox caused issues, I'd recommend trying the native version (package manager) instead of one downloaded from the internet. You can either do this from the graphical app store by selecting something like native, dnf or rpm instead of flatpak, or the native package manager with sudo dnf install firefox for Nobara, I think. Unlike flatpaks, native programs are installed for all users & require you to type your password during installation.
If you use an appimage or manually downloaded .rpm file, you need to take care of updates manually, by downloading a newer version like you did during installation. I would strongly advise against this, unless necessary & you know exactly what you're doing.
I think this answered your question, but feel free to ask if anything was unclear or you have other questions. I'm a programmer & I've used Linux for a while, so I should be able to answer most questions.
Edit: Sorry for the wall of text. I hope it wasn't too jargony.
TL;DR: The wall of text has context & things that might br good to keep in mind, but I'd recommend removing the flatpak version & the Linux .exe equivalent you're using, then trying sudo dnf install firefox.
Edit 2: Nvidia can sometimes cause problems on Linux, but if a different version of Firefox worked, it is very likely not the case here. Sometimes switching from Wayland to X11 or vice versa might help a bit, at least until the next driver update. Otherwise, I'd recommend Wayland, as it's more secure, actively developed, has fancy features X11 lacks & can be a bit more efficient.
Thanks for the response, definitely helpful! My follow up to that would be I'm still not sure how updating would work if I run the command you posted. Once I run that in the terminal, how do I know when there is an update for firefox? Will firefox just tell me like in windows, and update itself? Do I need to run a specific command in the terminal to prompt updates?
While I have you here too, I've just found one more bug that's been bothering me... In the application launcher, when I try to use the scroll bar the cursor won't select the bar itself, instead just defaulting to resizing the window. Any ideas on that? It's kind of a pain but I could live with it. Googling again didn't really bring up anything conclusive. Here's a clip to see what I'm talking about. Thank you again!
If the grahical app store has asked for a password when updating, like on normal Fedora (what Nobara is based on), all programs installed with sudo dnf install <program(s)> are also updated. A update to native packages can also be ran with sudo dnf upgrade. Flatpaks can be updated from the app store or with flatpak update. (no sudo, as that just raises the privileges for the next command, like dnf)
Sorry, I don't know about the scroll issue. The scroll wheel on a mouse or dragging 2 fingers on a touchpad should still work.
TL;DR: If you are prompted for a password when updating, everything's fine. This should be the case for you, as Nobara is based on Fedora, which supports this. Otherwise, you have to run sudo dnf upgrade or equivalent for your distributions's package manager.
I recently wiped Windows in favor of CachyOS, and it's been lovely! However, I have one outstanding issue that I can't seem to figure out.
To start, I have a Gigabyte B550I Aorus Pro AX motherboard. I followed the guide on the Arch Wiki for my particular chipset.
I still can't seem to control my cooling fans. * I have lm_sensors installed * I installed CoolerControl * I used modprobe it87 force_id=0x8628 * I tried adding the .conf files to /etc/modprobe.d/ and /etc/modules-load.d/ * When the steps above didn't work, I installed the it87-dkms-git package
No matter what I've tried, the only time the fan sensors get detected is when I also specify acpi_enforce_resources=lax in GRUB. From what I barely understand, that's not an option you want to leave on permanently, but perhaps y'all know better or have other ideas.
If it helps: * Motherboard: Gigabyte B550I Aorus Pro AX * Latest CachyOS kernel * Boot: GRUB
...allows the module to load without completely changing the acpi policy. I still don't know how to make it cleanly permanent or automated, but this is significant progress.
Also note that it should have been 0x8688 in my case, as revealed by sensors-detect.
Edit 2: Added
/etc/modules-load.d/it87.conf
it87
And
/etc/modprobe.d/it87.conf
options it87 force_id=0x8688 ignore_resource_conflict=1
And everything loads automatically! Thanks everyone!
I think this is the way we should communicate, when presented with the question on how to get on Mastodon:
Copy paste from the link:
How do I use Mastodon?
Download the Mastodon app from the Apple app store or Play store.
Create an account (just like Twitter or any other social media)
Follow people, and get posting.
Why do tech journalists say it’s too confusing to catch on?
I have no fucking idea.
EDIT for clarification, don't take this too seriously:
This “guide” is a bit of a joke made out of frustration. If you actually want to know more, including why I feel it has potential to free us from the dystopian hellscape that is modern social media, here is the “real” guide to Mastodon. It still uses simple language (and has lots of pictures!):
and trying to downplay potential users as stupid before they've even used a social media platform isn't going to exactly make them want to stay. or even try in the first place.
just makes mastodon look like a place where nerds reign free and normal folks won't be able to participate effectively.
if you want to make mastodon a destination and not a niche corner to be avoided, this is not the way.
i agree with you completely.
edit: I should clarify, the "guide" above is the thing insulting users. the guide is inaccurate.
When using the official Mastodon app (as suggested in the "guide") "instances" are not a factor at all (unless the user specifically goes out of their way). A new user could have never even heard of the term "instance" and the above steps would work fine.
You don’t just download the app, create an account, and go.
Actually with Mastodon this is literally how it works.
EDIT: I should say this is how it works now, it didn't always used to be this way. The official Mastodon app used to ask the user to pick an instance, but for a number of years now it defaults every new account to mastodon.social unless they opt out. There was a big brouhah about centralization but the Mastodon devs felt it made for easier on boarding.
Disclosure: I've tried it out on my computer, not the app. Is the app more user-friendly?
E.g. I only just realized now why I've been so confused by Mastodon; the web page shows you replies before showing you what's being replied to, without the UI making it obvious that's what it's doing and what's connected together. Does the app fix that, and is there a way to get a fix in a web browser?
I'm not sure, but i guess that it is replicating Twitter behaviour. I got used to that quickly.
But if you want a better experience you can easily find other front ends. I strongly suggest Phanpy that makes it really clear when a toot is part of a conversation/thread. It also does a lot of nice things like grouping boosts in horizontal carousels, collapsing long threads to avoid occpying the too many screens, and others, but it is still simple
But then: "Wait... it's still not showing me the OP followed by replies." It shows me a reply, with some faded text above. I click on the faded text above, and still don't get the OP, eventually click on a group of microavatars with mouseover text "Go to top" and an up arrow, and at last see what the hell it is people are talking about, with replies below. I try going through settings, find no way to get it simply show me the OP in the first place.
I guess I'll have to keep trying out front-ends until I find one that works ~~in a way that is not obviously maddening~~ the way I need it to.
Correct, it is mobile only. Unfortunately, I think I must be misunderstanding what you're saying about the op stuff. This is my view, The way I think about it, at least, these are all "OPs", ones with a plus sign next to the leftward arrow. Have comments.
And then if I tap, I get the op with its comments underneath it.
The fifth edition of FediForum has been rescheduled, and will be held on June 5-7. The event was originally planned for early April, but got cancelled at the last-minute after transphobic posts by one of the co-organisers of the event were surfaced. FediForum held two sessions in the meantime with the community on how the event should move forward. One of the outcomes is that there is now an advisory board for FediForum with people from the community. For this edition of FediForum, I will be hosting a session on what’s been going on in the fediverse in 2025. The network is constantly changing and evolving, and this session is intended to get you up to speed on what’s been happening in the last half year. More information on that soon.
Bandwagon talks about monetisation and sustainability
Bandwagon is a fediverse music sharing platform that’s currently in development, where artists can share their music. They are currently working on online album sales, and Bandwagon is committed to making this feature available without taking any transaction fees. In order for the project to be sustainable, Bandwagon is a paid 10$/month paid premium plan which will enable online album sales and higher bitrate streaming. At the same time, creator Ben Pate is also committed to keeping the software open source, and says that the project needs other Bandwagon servers to exist if the project is to be successful. – Bandwagon.fm
Discourse and the fediverse
Forum software Discourse has posted a blog talking about how they have integrated ActivityPub into their forums. They explain how Discourse forums can now select per category if it is federated, and thus followable by other fediverse software. It also shows what Discourse-to-Discourse federation looks like, allowing 2 forums to cooperate with each other. Federated forums require a mindset shift as have to get used to seeing forum posts in their microblogging timelines. Forum software like Discourse and NodeBB have made great strides in the technological capabilities regarding what’s possible with federated forums. Now people have to find out and experience what these technological features enable in practical use cases for people.
Bonfire slowly moves towards a 1.0 release
Bonfire is an upcoming fediverse platform, with a core functionality of microblogging with a focus on extensibility. In their latest update about how the platform is moving to a 1.0 release, Bonfire talks about the values and intentions of the platform, writing: “In a world of ‘move fast and break things,’ we’ve chosen a different tempo — one rooted in care, deep listening, and collective stewardship. Slow software means building for long-term resilience and meaningful participation, rather than chasing novelty, speed, or scale.”
Bonfire has taken a deliberate and mindful approach to software development, but their own description of “Slow Software” seems fairly accurate as well, as the team has talked about getting ready for a 1.0 release in the next few months since at least September 2023.
FediDB onboarding
Fediverse statistics site FediDB, operated by PixelFed and Loops creator Daniel Supernault, now has an onboarding tool to help people get started with the fediverse. It asks the user a few simple questions: first to select the type of content they are interested in, such as microblogging, video or forums. Based on that choice, it recommends various platforms. Based on the platform choice it asks for a few simple filters, such as region and community size, before presenting the user with a list of servers to choose from for registration.
The onboarding tool is sleekly designed, and streamlines the signup process by boiling it down to a few essential questions that the user needs to answer. However, this also showcases the issues that the fediverse has with onboarding new users: picking a platform and picking a server are meaningful choices that are hard to fully grasp the impact from as a new user. When it comes to picking a platform, the tool lists a few features for each platform, but comparing the relevance of these features is hard to do as an outsider. And when it comes to picking servers, the challenge is that servers themselves often do not publish relevant information that is needed to make an informed choice of which server to pick.
Mastodon: Giving Journalists Options Away From Big Tech
Saskia Welch from Newsmast writes about Mastodon and the fediverse at the recent International Journalism Festival. A consistent challenge remains to put all the lofty ideals about healthy social networks into practice, with Welch noting: “However, joining the platform continues to be a barrier for many users. A group of Italian women who attended the event abandoned their short effort to join the platform half-way into the presentation, confused about where to go and which app to use.” – WeDistribute/Saskia Welch
Owncast turns 5
The fediverse streaming platform Owncast turns 5 years this month, with a new merch store. One of the challenges of FOSS projects such as Owncast is the sustainability, and Owncast creator Gabe Kangas “at one point exhausted his personal savings so he could work on Owncast full-time.” Kangas says that now “people want to be around in meaningful ways. From the newsletter, core code contributions, the Roku app, people answering questions in chat, people brainstorming in GitHub, it’s important for it to be bigger than myself”. – Owncast Newsletter/Kit Rhett Aultman
A group of Italian women who attended the event abandoned their short effort to join the platform half-way into the presentation, confused about where to go and which app to use.
Yeah this one stings but it needs to be brought up, so we can make this way easier.
There's gotta be a way to design this so users can partly skip the process of searching for a good platform. Maybe using a controversial AI solution for recommending a platform based on some Keywords from the user? Maybe just based on a random algorithm for trusted servers? Maybe as you interact we make it easy to switch servers and as soon as you like the feed you can join?
There's gotta be something better. I hope we get there.
If we get to the point where people can overcome the entry barrier, I think this will also increase user retention and the overall fediverse literacy on the platforms themselves.
This does not address the issue of choosing the server though. This only works if the standard option for your server is reliable and rotated per registration.
Hey folks! We’re a small community working on a new Fediverse-based platform with privacy-friendly services, aimed at making onboarding easier—especially for Indian users.
We're still in early stages and would love your input on what you'd actually like to see.
Why do you want to host it at all? I mean there are already a ton of fediverse servers out there you can tell Indian people to use one of those. also hosting is expensive unless you have a very good reason to do so
We aren't hosting it all, as of right now. We'll be picking a few services and scale as required. As for why we're doing it at all is because we have seen for there to be a very few such initiatives in our region and aim to promote the conversation about foss and privacy through our efforts in providing alternative services.
The whole point of fediverse is to decentralise and federate it, so it doesn't make sense to just keep using existing servers!
We plan to use personal hardware and aim to minimise costs wherever possible!
Article discussing the push for passkeys as an alternative to passwords, including numerous problems associated with passkeys like big companies agenda, complicated proprietary implementations, vendor lock-in requirements and dependency on smartphone…
I think the author identifies the correct issues but this isn't an argument against passkeys as a security measure rather their inevitable use by corpos for data harvesting. I hate it too tbqh I'd rather get hacked on some disposable email account with a random username than have to hand over my PII, money and mortal soul to Google for extra sec. At work it's a different level of shit entirely. We have SSO behind SSO behind SSO, the inept overseas coworkers don't understand arch of the company they got merged with nor the concept of legal compliance or ISO, they're running the entire sec programme into the ground to bring it under AD in a way that directly compromises their AD when nothing in any of our orgs even uses windows in any way except theirs where they drink M$ coolaid. If this job wasn't so comfortable I'd be depressed just thinking about it.
A lot of incorrect assumptions in this article. If you don't like the idea of a key exchange over passwords, I hope you use password auth when you SSH into things 😁
The word passwordless is nonsense. In most cases, most passkey implementations, you need a PIN to unlock your private key to authenticate. PIN = password, except it's numbers only. Nonsense. Passkeys simply obfuscate the problem and move it somewhere else, most often into a PROPRIETARY key management tool. For example, Microsoft wants you to use THEIR authenticator app. Not just any app that adheres to the standard. Nope. This effectively means super-vendor-lock-in. Absolute nonsense.
You can argue that the term "password less" is nonsense, but there is literally nothing about the spec that prevents you from using passkeys as they were designed: with hardware keys that support the open FIDO2 authentication protocol. Yes, you still need a second factor to verify the authentication attempt (via a PIN), but unless you're mailing that key to hackers, the private key generated by your SoloKey, NitroKey, or another open source hardware key, is more secure than any password ever will be.
Passkeys usually require a phone - this is a single point of failure, and one that gives the big companies extra control over you. Phone, number, SIM, and so forth. A beautiful bevy of data. The whole idea of actually having to use your phone as an identity vector is horrible.
Phones support storing passkeys. Phones also support storing passwords. In no way does this mean you must use them for this. You can either use hardware keys, or you can use your favorite open source password manager to store passkeys where you should already be storing your passwords anyway.
You need "biometrics" to supposedly prove you're you to unlock your private key. Biometrics are a form of password, except you can't replace it, and it also gives yet more of your personal data to the big companies. More nonsense.
This is literally a direct contradiction of what the author said in their first bullet point. Use a PIN if you don't like using biometric auth.
The implementation of passkeys is fragmented, vendor-specific, and complicated. Only diehards who love technology can use this. The same kind of people who were "all in" when IoT/cloud crap came out, and now they see their smart homes slowly go offline as big vendors almost arbitrarily cut support for old gadgets and effectively kill products. Because cloud.
Most of this is actually a fair critique. The FIDO Alliance is still working on the spec, and I think they should require any implementation of passkeys to follow the spec to a tee without adding any kind of nonstandard bullshit to their authentication.
However, most advancements in tech begin with only appealing to enthusiasts and later become adopted by wider audiences. It doesn't make them bad that they aren't immediately popular with everyone.
Passkeys only solve one use case - phishing where the user inputs their password and MFA into a fake site.
I'm glad the author can at least recognize that there's at least one thing that passkeys solve that passwords can't. But it's not the only thing. When you enter a password on a site, you're hoping like hell that the service you're using hashes it and hashes it properly. When you authenticate with passkeys, you're sending the site a public key. This key will have way more entropy than any password will, so anyone trying to crack a hashed public key is in for a long, miserable time (obviously not impossible though). But even if they wasted their time doing that, it's a public key. Who cares?
Any service you use passkeys with instead of passwords won't put you in another leaked password database. ~~The public key just needs to be invalidated and~~ you can move on with your life.
Decentralization is obviously the big thing about the Fediverse but is it TOO decentralized to gain traction?
There is no reason why they have to be fully separate domains in the same branch. You can set up a system of fully independent moderation and extreme levels of customization while having them all on one site with a front page that allows everyone to see whats popular.
A front page wouldn't prevent individual subgroups from requiring approval to join, it wouldn't prevent subgroups from banning those it doesn't want. It doesn't prevent users from blocking subgroups that it doesn't want to see on the front page.
What would be most useful is that now someone could create an account on the Reddit, Twitter, Facebook(?) alternatives and give them access to every community, and then allow each community to set its own rules, and customize its own to be unique while having a unified product to "sell" and get people to move.
Hot take? Blue Sky should be worked with to join the Fediverse as the twitter alternative and Mastodon should work to be the Facebook alternative
TLDR: One front page and general site for Lemmy, Mastodon....and to sign up and see whats popular and then have fully independent subgroups.
Google Chat or whatever uses to be federated via XMPP, but then they slowly started making incompatibility changes. Due to it being such a dominant chatting service, the real federated versions died out.
Basically I'm saying it's not worth it. If you want to support Threads or Blue Sky as a central front page to the Fediverse then go for it, but they don't actually need your support.
IMO, it isn't decentralized enough. The federated model is better than centralized corporate services, of course, but it still suffers many of the same pitfalls in microcosm. We need private, encrypted friend-to-friend connections that enable friend-of-a-friend onion routing to those outside one's personal social circle to effectively mimic how real human social networks actually work. The only middlemen we need are the friends we made along the way.
From my perspective, that's not something I'd use, or at least, it wouldn't have been much use to me when I was a young closeted queer person in small town Australia. It wouln't have been much help finding my peers
It could have been, there's nothing preventing such a network from providing a degree of anonymity by leaving your signature out of a post and adding a few increments to the distance on its onion route to obfuscate the source.
And in any case, you'd only need to make one remote friend to reach an entirely different segment of the network.
I cannot, and they can't stand me either because I've deleted more bitcoin than most of them will ever see and I've personally killed about $5million in crypto scams before they could pull out the rug. XD
A group of people who would all need to agree before action, a mini government of sorts, maybe elected idk but its the only way to gain a real foothold. The people running it are only supposed to act if illegal activity is going on and they are contacted by authorities in the appropriate jurisdiction.
The people running it are only supposed to act if illegal activity is going on and they are contacted by authorities in the appropriate jurisdiction.
which is the "appropriate" jurisdiction?
what if it's legal in my country, but it is illegal in the country where the server is? I have no other choice of server, you're taking away our ability to join servers in our own countries
Which EU country? Who's to say that's the ideal? That sounds biased. Also the "ideal" (if there is such a thing) could change over time with global politics.
Still too problematic, as what is legal and not in the EU depends on the trendy neo-nazi party du jour. Check Germany, for one, where apparently showing any disapproval of Israel gets you Gestapo'd, or that's what Lemmy administrators in Europe seem to fear. Or Italy / Spain, where any attempt to liberate sports transmissions gets half the internet shut down.
Oh, did I even mention Turkiye?
Honestly, I've always been of the opinion that projects that are intended to be truly international need to build up to some sort of "all humanity" jurisdiction or international waters jurisdiction. Since it's not like the UN is going to provide any sort of aid here.
Switzerland is probably the country most likely to leave everyone alone lol. Because they're a direct democracy and extremely decentralized. Plus internationally neutral.
It won't get bad there it's the richest country and has direct democracy, CHF 5,430 post tax median salary. There's nothing for an authoritarian party to say to convince voters who are the wealthier people (actual citizens) of Switzerland
Also the average assets for adults is over $800K they're too rich to fall to power hungry parties
Then make the "one true frontpage" for Lemmy or whatever (implement ActivityPub, maybe borrowing some code from the Lemmy codebase itself, or kindof making a fork of Lemmy), and if it's good, it'll be used. If not, it won't.
But then, it might well fall victim to this phenomenon:
Lemmy has lots of competing "front pages." How will one more change anything? A more generic domain name or something?
Yes, back in days of yore when the cyberbunnies had to run their lines through the bare wastes of the great Dave's router, there existed a tool so coveted by the eunuchs that they named it twice, and would beg for degrees of release depending on how gimped up they were. "More" some would scream, "less" others would whisper.
So after trying out Mint on my old laptop for a few months I wanted to go straight to Linux on my new build what with it being surprisingly user friendly once past the initial jank.
I started with Mint Cinnamon edition which did install after some initial teething (Boot USB on safemode) but just refused to work with the wifi adapter on that motherboard, it also couldn't see the GPU but I never got to trying to resolve that since the Mint setup is pretty wifi dependant and I wasn't sure it wouldn't fix itself once it could finish sorting itself out.
I then had a friend who's been using Linux for 10 years (Some distro called tumbleweed?) reccomend I try Ubuntu as it generaly supports more hardware. It did work with wifi right out of the box but had this weird issue where it could recognize my GPU and load the right driver but then just give up and use the IGPU on my CPU anyway. Also janky with software with steam (Which I never had issues with on Mint on my laptop) just refusing to work properly and at one point getting into a cage match with snap, even when installed from steams own website rather than the application manager (with an uninstall of the old one in between of course)
We spent a good couple of hours getting slapped with weird behaviours and bugs my friend had never seen before until calling it a day.
So once again I'm here politely asking what the fuck linux!? Seriously though what do I do here, I can just about manage running windows software on afformentioned laptop mint install but linux as a whole just seems to hate this hardware setup.
Alright I'm just going with a stripped down version of windows 10, I've spent 2 days trying things from here and from that friend and from random forum posts of people with the same issue and at this point it seems no one has a consistent fix and I don't feel like building an entire operating system from scratch (nor would I know how)
Bizarre, I wouldn't expect issues with Linux on that hardware config. Perhaps try something with newer packages, I have a pretty similar setup like yours except for the CPU (7800X3D) with no issues on EndeavourOS. Fwiw, I have the Powercolor Reaper 9070XT which runs hot and loud out of the box but is pretty good now with a slight undervolt and tweaked fan curve
You hardware is very new and Linux Mint I believe has kernel 6.8. You switch to more up to date distro. Ubuntu 25.04 or Fedora 42 would be good choices. I also have a similar setup but one generation older. I have disabled the integrated GPU completely (from the BIOS) just to avoid my nightmares from using laptops with hybrid-graphics.
Today I found out that on this platform, "block" is just a fancy word for "filter". Just had an individual user go through my entire profile and downvote everything. So I blocked them, thinking that this would make me safe from any future stalking. But I was just informed that no, any user that you 'block' is actually still able to see everything that you post and vote freely.
All that 'blocking' actually does is hide the person from you. But they're still free to stalk and do as they please. I just tested this out for myself using my other account and sure enough, it's true.
I just want to know, how is this acceptable? I bet you that if I called out this user publically, I would probably end up in hot water myself for harassment or something. And yet 'blocking' is completely fkn useless too. So what recourse does a user actually have here when faced with a hostile user that wants to ruin their experience on Lemmy?
Coming from Blåhaj, I thought I would try 'moderating' my own experience for a bit. But you can't 'moderate' your own experience if the tools to do so are fkn useless and only trick you into thinking that something has been achieved, without actually doing anything useful.
And now I'm starting to see a new value in instances like Blåhaj. Because you actually need admins that give a shit around here or else you're just left to the wolves on a platform that seems more interested in protecting abusive users than allowing users to protect themselves.
Edit: watching you all upvote the person talking shit about how this works on other platforms while downvoting the actual correct information that comes with a source has certainly taught me a thing or two about this platform and the people on it. You all actually prefer misinformation to fact as long as it suits your vibe or opinion more. Like a bunch of fkn MAGAs. I really wish there was a way to disable notifications for this post (another feature missing here) because watching you people upvote misinformation is enough to make me no longer give a flying fuck what anyone here says or thinks.
I want to know when and why younger people seem to think that blocking inherently works both ways. It's almost never worked like that. If you block someone, you are hiding them from your sight; not hiding yourself from theirs. This is the most common way blocking works.
Can you give examples of platforms where it works like this? I know that blocking someone on Facebook blocks them from being able to see you. Pretty Twitter is or was the same before Musk. And I just looked it up, blocking a user on Reddit does in fact block them from seeing you. I'm pretty sure it's always worked this way on smaller platforms I've used too.
So I'm curious to know, which platforms have you always used that have apparently always worked this way?
Literally every forum, chatroom, and social media site outside of TikTok, and I think Imgur, works the same way it does here. Including Facebook and Reddit. The only thing Reddit does special in this, is that blocked users engagement doesn't appear to you either. So if you block user ABC, they will still see your posts, but if they vote on it, you won't see that vote.
Not much of an example these days, but pre-mainstream social media (forums, chat) block was always hide on your end.
To be honest I never blocked back in the old days (the mods would take care of outright spam and users being disruptive).
For me, the new method seems counterproductive. Hiding your post/messages that can still be accessed via another container and/or account just seems strange to me.
So, 20 years ago before Facebook? I know for a fact that blocking has always worked properly on Facebook, I had a very toxic 'friendship' there another lifetime ago where we were blocking and unblocking each other every 5 minutes. But it's funny how everyone here keeps upvoting the incorrect information and ignoring the correct information about this. Not funny haha but funny peculiar. If Facebook only filtered out people instead of blocking them properly, it would be a disaster as far as stalking goes. And I think that everyone knows it because normally people on this platform seem quite rational. Except for when there's any criticism of the Fediverse, that is.
I agree with you that all mainstream platforms (FB, Twitter, Reddit - this just the ones I have experience with) work like that.
Believe it or not, but there still exist modern forums with large user bases (stable or growing), so it's not like it's an archaic model.
It's fair to criticise Lemmy for using this approach. I genuinely see where you are coming from. But if we approach Lemmy as an evolution of old style forums, then the "hide" approach makes more sense.
With admins, mods (not relevant for default UI?) actively dealing with mass downvotes, stalker-like behaviour and so on.
Part of the adoption of the dual-side block method is because large corps want automation and don't really care about quality (all about engagement).
I think the utility of blocking people on a public platform is kind of fake anyway. If someone is harassing you, and you block them, it's obvious that you did it so they'll just log out and suddenly they can see your posts again. Accounts are trivial to make on the fediverse too so they can always just spin up a new one to harass you.
I think silent filtering is better for that reason because they can't tell that you did it so they won't just immediately switch to a new account and keep going.
Active blocking like you're talking about only makes sense if there's such a thing as "follower-only" posts imo. Otherwise it's a false sense of security because they can see everything anyway just by logging out or switching to another account.
Good old ed(1). I don't know why, but every now and then I like to edit my files using ed(1). Are there frequent ed(1) users around here? What is your motivation to use it?
wowwoweowza
in reply to heartbreaker • • •Serious question for you all. I too wish to see Linux use increase. I also want to see corporate social media die. I am thinking of requiring my students to create Lemmy accounts for a Lemmy group i create.
Do you think this might move folks away from essy corporate os and social media? How do You see it giving wrong?
yuri
in reply to wowwoweowza • • •I like it! Even if the majority of em completely abandon the accounts afterwards, it’ll increase the visibility of a fledgeling platform AND it’ll show a few folks that alternative social media platforms exist.
I mean, shit, if lemmy can suit my needs there’s no reason it shouldn’t work for at least some of em.
heartbreaker
in reply to yuri • • •I remember a teacher requiring us to use Matrix for a coding class.
We still mostly used Discord, and after that class ended, we never used it again.
You and I have a reason we use Lemmy: we don't want to use Reddit and want the Fediverse to grow.
Simply forcing your students to make Lemmy accounts won't do anything, in fact it might make them hate it (Oke boomer).
Corgana
in reply to heartbreaker • • •☂️-
in reply to Corgana • • •