Marble’s timeless elegance enhances any space, but humid climates can threaten its pristine condition. If you’re in a damp, coastal, or tropical area, you may have noticed marble surfaces—like a large marble slab for wall accents or luxury wall tiles—showing signs of mildew, yellowing, or dullness. With the right care routine, you can keep your marble looking stunning. Here’s how to clean and protect it in humid environments.

Why Marble Struggles with Humidity

Marble’s porous nature makes it vulnerable to moisture. In humid conditions, water from steam, spills, or even the air can penetrate the stone, leading to stains, etching, or mold growth. Grout lines are particularly susceptible to mildew, especially in bathrooms or kitchens. High-end installations like luxury wall tiles or a large marble slab for wall use require consistent care to maintain their beauty in moist settings.

Keep It Dry Every Day

The best defense against humidity is keeping marble dry. Wipe down marble surfaces daily with a soft, dry microfiber cloth, especially in high-moisture areas like bathrooms or kitchens. Focus on areas where water tends to pool, such as near sinks or the base of a large marble slab for wall installations in showers. Even small amounts of standing water can cause damage over time.

Don’t let wet items like towels, sponges, or soap bottles sit on marble surfaces. A quick daily wipe-down prevents moisture from seeping in and keeps mold at bay.

Clean with Care

Marble demands a gentle cleaning approach. Avoid acidic cleaners like vinegar or bleach, which can etch or discolor the stone. Opt for a pH-neutral cleaner formulated for natural stone, or mix a few drops of mild dish soap with warm water. Wipe the marble with a damp, soft cloth, rinse with clean water, and dry immediately to avoid water spots.

This method is essential for luxury wall tiles, where even slight damage is noticeable. Never let cleaning solutions linger, as they can cause etching if not rinsed promptly.

Seal Consistently for Protection

Sealing is critical in humid climates to protect marble from moisture. A quality sealant forms a protective layer that blocks water and prevents stains. In drier climates, sealing once a year may be enough, but in humid areas, reseal every six months. This is particularly important for light-colored marble or luxury wall tiles in high-traffic areas like bathrooms.

To check if resealing is needed, place a few drops of water on the marble. If they bead up, the sealant is working. If they soak in or darken the stone, apply a new coat of stone-specific sealant, ensuring the surface is clean and dry.

Maintain Grout Lines

Grout is a magnet for moisture and mold in humid environments. Seal it every six months alongside the marble to keep it protected. For stains or mildew, apply a paste of baking soda and water, let it sit for a few minutes, then scrub gently with a soft brush. Rinse thoroughly and dry completely to prevent further issues.

Avoid harsh chemicals or abrasive scrubbers, as they can damage both the grout and the marble. Regular grout maintenance ensures your marble installation stays clean and durable.

Enhance Ventilation

Good airflow is essential for marble in humid spaces. Stagnant, damp air encourages mold growth, even on sealed surfaces. Run exhaust fans during and after showers or cooking to lower humidity levels. A dehumidifier can help in consistently moist rooms. Open windows when the outdoor air is less humid, and use ceiling fans to promote air circulation. This is vital for large marble slabs for wall use, where trapped moisture can cause unseen damage.

Prevent Small Mistakes

Marble damage often results from minor oversights. Don’t let wet items like soap dispensers or damp cloths sit on marble surfaces, as they can cause stains over time. Clean spills immediately to avoid etching. Avoid abrasive scrubbers or generic cleaners, which can strip the sealant or scratch the stone. Regularly dry areas prone to water buildup, like shower corners or sink backsplashes.

Polish Carefully

If your marble loses its shine, a marble-specific polish can restore its natural luster. Use it sparingly with a soft cloth, following the product’s instructions closely. Over-polishing or using the wrong product can harm the surface, so aim for a gentle, natural sheen rather than an overly glossy finish.

Call in Experts When Needed

For deep stains, persistent mold, or severe etching, professional help is the best option. DIY attempts to sand or chemically treat marble can worsen the damage. A stone restoration specialist can safely repair high-value installations like luxury marble tiles or a large marble slab for wall use, ensuring long-lasting results.

Final Thoughts

Marble can remain stunning in humid climates with consistent care. Dry it daily, clean it gently, seal it regularly, and maintain good airflow. These straightforward steps protect your investment, keeping your marble—whether it’s a large marble slab for wall accents or exquisite luxury wall tiles—beautiful for years.

A while ago I got the chance to get lessons on NoSQL. I already had lessons and some experience with SQL in the past, so here I'd like to share in short my current knowledge about these two concepts. Note that I liberally use the word query in this article both for querying data (i.e. select), as well as changing data (i.e. insert, update, delete).

SQL

SQL is short for Structured Query Language, and is often pronounced "sequel". It's a language to query a so called Relational Database. When people talk about a SQL database, they mean a Relational Database that you can query using the SQL language. The database model is mostly aimed at being consistent. The database consists of tables with columns and rows. Columns tell you what type of data we have, and new data is added by adding rows. You can visualise it by thinking of spreadsheets. There can be relations between different tables, they are defined by saying what columns in different tables correspond with each other. There are so called one-to-one relations, one-to-many relations, and many-to-many relations. Typically you can group tables together in a so called schema. It's not always useful to use this, so in many cases people just put all tables from the database in a default schema. In PostgreSQL the default schema is called public.

To give a simplified example of how a SQL database can look;
Let's say we have a social network platform with users who make posts and they can like posts. We want to store that in a SQL database. We can have a table USERS, a table POSTS, and a table LIKES. The USERS table can have a column username. Maybe there's also other columns, like profile for profile information, email and passwordhash for authentication, etc.
Then we have the POSTS table who needs a column content, user, and created_time.
A table will generally have a so called "primary key". This is a unique value that we can use to uniquely identify the correct row. Often this is a single field, but it's possible to use a combination of fields to form a so called composite primary key. Let's say we use username as the primary key for USERS. We currently don't have a unique key for POSTS, but you can always add an extra column for that, so we will add a column id for POSTS.
Finally we have the LIKES table who needs the user who did the like in a user column, and a post column containing the id of the post that was liked.
Columns also have a type and it's possible to set constraints on columns like saying that they must be unique or can't be NULL.
A post is always made by a user, that's a one-to-many relation between the USERS and POSTS table. We can define this relation by stating that POSTS.user is a foreign key corresponding to USERS.username. Meanwhile a like is made by a user, and corresponds to a post. These relations can be defined by saying that LIKES.user is a foreign key corresponding to USERS.username, and LIKES.post is a foreign key corresponding to POSTS.id. The primary key for the LIKES table can be a composite primary key of user and liked post.

To create these, it could look something like

create table if not exists public.users(
  username varchar primary key,
  profile varchar
);

create table if not exists public.posts(
  id serial primary key,
  username varchar,
  content varchar,
  created_time timestamp default current_timestamp not null,
  foreign key (username)
    references public.users (username)
);

create table if not exists public.likes(
  username varchar,
  post serial,
  foreign key (username)
    references public.users (username),
  foreign key (post)
    references public.posts (id),
  primary key (username, post)
);

NoSQL

Depending on implementation, a NoSQL database can also use the SQL language for querying. The difference is not so much the language to query the database, but rather the underlying technology. While the data is strongly defined in SQL by using columns and types, a NoSQL database doesn't have that. It consists of so called containers that store JSON objects, and there is no check on the content of the JSON object. This JSON object is also called a document in this context, which is why people sometimes refer to this type of database as document storage. It's not about documents like you have in a file system, but storage of JSON objects. In a way you can see the containers as being similar to SQL tables and the documents similar to the rows in SQL. You can also define a partition key per container. The partition key is a field that you expect in each of the JSON documents of the container, and allows the underlying database system to split the container up over different servers. This can reduce load when querying on a specific partition key.

If we take the previous example, and we decide that we generally want to fetch all the likes corresponding to a post, then the users can be put into a container users, and posts and likes can be put together in another container post_actions (feel free to come up with a better name). We have to make sure that the field we query on has the same name, so a post can look something like {post_id: 123, content: "blablabla", created_time: "2023-08-16 10:06:23+00:00", user: "Alice"} while a user can look like {username: "Alice", profile: "Hey, I'm Alice, let's be friends <3"}, and if Alice likes her own post, it could look like {user: "Alice", post_id: 123}.

Now we can query select * from post_actions where post_id = 123 and we immediately have the post and all likes corresponding to it. And if we add a partition key on post_id, or some function based on it, we won't even need to query all partitions, only the one where this post is stored. When done right, this can be a very powerful setup.

Scaling

While SQL was mostly aimed at consistency, NoSQL is mostly aimed at horizontal scaling.

When we talk about vertical scaling, it often means that, to allow more load, you have to use a heavier server. More RAM, faster CPU, larger and faster disks... This is the case for a SQL database. Horizontal scaling on the other hand allows you to scale by adding more servers instead of having to make them heavier.

In NoSQL you will mostly group data according to how it's queried, and, unlike with SQL who wants to be consistent, duplication of data is allowed. As we saw in the example, one simple select can often give you a full set of data of different types, and a partition key allows you to split up the container so that one container can be split up and stored across multiple servers, while only having to query the one partition, and thus spreading load over the different servers. Another reason why NoSQL can scale better, is because it does less. For example, it doesn't check for correct data types or consistency. It's up to the application to do that, and it's up to the developer to make sure their application can properly scale.

SQL normalisation

When you have an application and you need a database, you need a way to represent the data correctly. There's a whole study on how to properly do that. In SQL we call this process normalisation. Here's a short list of steps to take, but note that for most applications these steps are not followed to the letter. Sometimes because a developer sees a reason to deviate from it, but a big reason is that frameworks take over a lot of the logic, and they may have reasons to do things in slightly different ways.

1. For each form/page you have, list the data. Choose good names for each piece of data, group repeating parts (e.g. a profile with posts has the data of the profile, but posts can be grouped as repeating parts).
2. Now we isolate the repeating parts in their own separate entity. One attribute should be the primary key of the parent (e.g. for posts, we require the username of the person who made the post as attribute) and you should find a second unique attribute. Together they can form the primary key.
3. Check for attributes with composite primary keys for attributes who are not functionally dependent from the primary key. These should also be made their own entity with their own primary key. (E.g. login data can be considered functionally different from the username they post with)
4. Bring attributes together who are functionally dependent from non-key attributes. These should also be brought into it's own entity, and the attribute that identified this entity becomes the primary key.
5. Integrate the normalised data groups. This is mostly choosing consistent naming for everything and group entities together where you're talking about the same underlying data.
6. Then we determine the relations between the entities. A relation in SQL is always 1-to-1, 1-to-many, or many-to-many. A user has multiple posts, so that's a 1-to-many relation. In SQL we show this by making sure the primary key from the user is a foreign key attribute in the post. For a many-to-many relation, we add a new table with records containing the primary key from one entity and the primary key from the other.

Note that the example we used earlier was mostly to show some principles, and may not be a good example of a properly normalised model.

NoSQL modeling

While NoSQL is much newer, there are similar steps you can take to create a proper model of your data. Here it's less important to force consistency, but more important to keep queries cheap. You can take the word cheap very literally. Each query takes cpu, memory, time... All of this costs money. As such, it's possible to estimate how much a certain execution costs. This cost is what we want to optimise for. Here are steps you can take to model your database;

1. look at the normalised (i.e. SQL) model, including the relations
2. In a normalised model, we want to put things in different tables if they are functionally different. In NoSQL that isn't the case. We want to group things according to what will be cheapest when querying. When we have a relation, we check if we should embed or reference
   
   • Typical cases where you embed are 1:1 or 1:few relations who are read and updated together
   • Referencing (i.e. put the data in different containers) is typically done with 1:many or many:many relations when you read or update separate
   • Note that there may be cases where we both reference and embed, see later

   
   

3. Choose a partition Key
   
   • This must obviously be a name of a key in our document
   • You should not have too many documents per partition and you should have a nice spread regarding both storage and request. When the partitions are not nicely balanced like that, you have a so called "hot partition".
     
     • Depending on technology, the maximum JSON object and partition size may both have a limit.
     • Maybe counterintuitive, but there is no limit regarding the amount of partitions, so one document per partitions is OK. Many partitions like this is also referred to as having a "high cardinality".

     
     

   • What partition key to use, depends on the most important requests.
     
     • If the data you generally select on is not part of the data, because you normally join, you can embed the data but also keep the data in a separate container, and make sure that updates propagate.
     • When you don't really have a key you query on, you can add a new key-value with fixed value, e.g. {type: ""}. This is OK, because it's probably only intermediate, see next step.

     
     

   
   

4. When different containers have the same partitionKey, move the data to one container. This step shows how completely different data can be stored in one container.
5. Lastly, add fields to keep queries cheap. Expensive (e.g. cross partition) queries should only run rarely. Think once per week, rather than multiple times per day. This is typical for things like count(*) and you need to make sure your software updates these fields in the same transaction of the corresponding change.

I'm an expert now!

This is just a short introduction, and there are many peculiarities that you only learn to see and properly handle by experience. I think the important difference is that in SQL you try to optimise for consistency, while in NoSQL you try to optimise for keeping the queries cheap, even for huge amounts of data. If you optimise for the correct property, you should be fine. I think it's also important to note that while you're supposed to optimise for being cheap in NoSQL, it is therefor not always cheaper than SQL. NoSQL is good for huge amounts of data where vertical scaling becomes hard or impossible. But it also requires more work from your program to keep things consistent. Whether SQL or NoSQL makes more sense for your project, is something you'll need to decide yourself.

Good luck!

The heart is a bloom, shoots up through stony ground
But there's no room, no space to rent in this town
You're out of luck and the reason that you had to care,
The traffic is stuck and you're not moving anywhere.
You thought you'd found a friend to take you out of this place
Someone you could lend a hand in return for grace

It's a beautiful day, the sky falls
And you feel like it's a beautiful day
It's a beautiful day
Don't let it get away

You're on the road but you've got no destination
You're in the mud, in the maze of her imagination
You love this town even if it doesn't ring true
You've been all over and it's been all over you

It's a beautiful day
Don't let it get away
It's a beautiful day
Don't let it get away

Touch me, take me to that other place
Teach me, I know I'm not a hopeless case

See the world in green and blue
See China right in front of you
See the canyons broken by cloud
See the tuna fleets clearing the sea out
See the bedouin fires at night
See the oil fields at first light
See the bird with a leaf in her mouth
After the flood all the colours came out
It was a beautiful day
A beautiful day
Don't let it get away

Touch me, take me to that other place
Reach me, I know Im not a hopeless case

What you don't have you don't need it now
What you don't know you can feel it somehow
What you don't have you don't need it now
You don't need it now, you don't need it now
Beautiful day

Written by: Paul David Hewson, Adam Clayton, Larry Mullen, Dave Evans
Album: All That You Can't Leave Behind
Released: 2000

#U2 #BeautifulDay #Remastered #rockMusic #lyrics #rock #2000s #youtubeFree #googleFree #metaFree #alphabetFree #songLyrics #alternativeRock #popMusic #rockMusic #Bono #AdamClayton #TheEdge #LarryMullen

Album: Welcome Interstate Managers
Released: 2003

Lyric:
Stacy's mom has got it goin' on
Stacy's mom has got it goin' on
Stacy's mom has got it goin' on
Stacy's mom has got it goin' on

Stacy, can I come over after school?
(After school)
We can hang around by the pool
(Hang by the pool)
Did your mom get back from her business trip?
(Business trip)
Is she there, or is she trying to give me the slip?
(Give me the slip)

You know, I'm not the little boy that I used to be
I'm all grown up now
Baby, can't you see?

Stacy's mom has got it goin' on
She's all I want
And I've waited for so long
Stacy, can't you see?
You're just not the girl for me
I know it might be wrong but
I'm in love with Stacy's mom

Stacy's mom has got it goin' on
Stacy's mom has got it goin' on

Stacy, do you remember when I mowed your lawn?
(Mowed your lawn)
Your mom came out with just a towel on
(Towel on)
I could tell she liked me from the way she stared
(The way she stared)
And the way she said
"You missed a spot over there"
(A spot over there)

And I know that you think it's just a fantasy
But since your dad walked out
Your mom could use a guy like me

Stacy's mom has got it goin' on
She's all I want
And I've waited for so long
Stacy, can't you see?
You're just not the girl for me
I know it might be wrong but
I'm in love with Stacy's mom

Stacy's mom has got it goin' on (she's got it going on)
She's all I want and I've waited for so long (waited and waited)
Stacy, can't you see?
You're just not the girl for me
I know it might be wrong
I'm in love with

Stacy's mom, oh, oh
(I'm in love with)
Stacy's mom, oh, oh
(Wait a minute)
Stacy, can't you see?
You're just not the girl for me
I know it might be wrong but
I'm in love with Stacy's mom

Written by: Christopher B Collingwood, Adam "compositions, Inc." Schlesinger

#googleFree #youtubeFree #musicVideo #officialMusicVideo